Inserting music cd when itunes is open causes instant reboot

When itunes is open and I insert a music cd with .cda files on it the computer instantly reboots. It reads and plays back the files fine on other players, but obviously this is no helpful if I want to import into the itunes library.
I found some posts with similar problems but no solutions posted. Any ideas? Please let me know if I can supply some more info to help find the solution.
BTW I upgraded the itunes today, but problem remains.
TIA
Digikiwi

I've been researching and came across Windows Debugger: Here's the report form the memory dump
Microsoft (R) Windows Debugger Version 6.6.0003.5
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\WINDOWS\Minidump\Mini061106-04.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is:
SRVc:symbolshttp://msdl.microsoft.com/download/symbols
Executable search path is:
Windows XP Kernel Version 2600 (Service Pack 2) UP Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 2600.xpspsp2gdr.050301-1519
Kernel base = 0x804d7000 PsLoadedModuleList = 0x805531a0
Debug session time: Sun Jun 11 12:05:18.625 2006 (GMT+12)
System Uptime: 0 days 0:05:25.233
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 100000D1, {87b246f0, 2, 1, 86dc34ff}
Unable to load image Vax347b.sys, Win32 error 2
* WARNING: Unable to verify timestamp for Vax347b.sys
* ERROR: Module load completed but symbols could not be loaded for Vax347b.sys
Probably caused by : Vax347b.sys ( Vax347b+ef58 )
Followup: MachineOwner
kd> !analyze -v
* Bugcheck Analysis *
DRIVERIRQL_NOT_LESS_OREQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 87b246f0, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000001, value 0 = read operation, 1 = write operation
Arg4: 86dc34ff, address which referenced memory
Debugging Details:
WRITE_ADDRESS: 87b246f0
CURRENT_IRQL: 2
FAULTING_IP:
+ffffffff86dc34ff
86dc34ff 86b1d4dac100 xchg [ecx+0xc1dad4],dh
CUSTOMERCRASHCOUNT: 4
DEFAULTBUCKETID: COMMONSYSTEMFAULT
BUGCHECK_STR: 0xD1
LASTCONTROLTRANSFER: from 468b10fb to 86dc34ff
SYMBOLON_RAWSTACK: 1
STACK_TEXT:
WARNING: Frame IP not in any known module. Following frames may be wrong.
80500214 468b10fb 878d0f44 80000000 75006e7e 0x86dc34ff
80500218 878d0f44 80000000 75006e7e bbbe804b 0x468b10fb
8050021c 80000000 75006e7e bbbe804b 00000001 0x878d0f44
80500220 75006e7e bbbe804b 00000001 568a4275 0x80000000
80500224 bbbe804b 00000001 568a4275 cabe0f6c 0x75006e7e
80500228 00000000 568a4275 cabe0f6c 087d8b57 0xbbbe804b
STACK_COMMAND: dds @$csp ; kb
FOLLOWUP_IP:
Vax347b+ef58
f7285f58 ?? ???
FAULTINGSOURCECODE:
FOLLOWUP_NAME: MachineOwner
SYMBOL_NAME: Vax347b+ef58
MODULE_NAME: Vax347b
IMAGE_NAME: Vax347b.sys
DEBUGFLR_IMAGETIMESTAMP: 426c9fbc
FAILUREBUCKETID: 0xD1WVax347b+ef58
BUCKET_ID: 0xD1WVax347b+ef58
Followup: MachineOwner
I hope this provides a bit more data to delineate the problem's source

Similar Messages

Itunes wont open cause its not a win32 application? it opened yesterday help

itunes wont open cause its not a win32 application? it opened yesterday and now it wont and my friend plugged her iphone in and now it wont work?

Doublechecking. When you did the complete uninstall, were you using the following document as a guide?
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
(If damaged program files are involved here, a standard install might not remove them, and a reinstall might not then replace them. So the Verify iTunes and related components are completely uninstalled section is an important step.)

HT203163 can anyone help when itunes wont open in windows 7

Can anyone help when itunes wont open at all in windows 7

I'm having the same issues with windows 7 32 bit. I can download iTunes, the icon appears on my desktop, but when I go to double click on it to open nothing happens. not even an error message.

MacBook won't go to sleep when iTunes is open

Hello, everyone.
My MacBook refuses to go to sleep by itself when iTunes (version 9.0.3)is open. However, I can make it go to sleep using the Apple menu, the keyboard or the remote control (pressing and holding the play button).
I've checked this page
http://support.apple.com/kb/HT1776
but the solution is not there.
When iTunes is open, I make sure there is nothing playing or downloading (no song, no podcast, no video). iTunes checks for new episodes of podcasts every hour, and the computer is set to go to sleep after a few minutes of inactivity.
Any ideas?
Best regards,
Jobuscon

Hi.
I had the same problem not to long ago.
I did the following steps to fix the problem:
1. Download Smart Sleep preference pane, (install for ALL USERS), and change your computer's sleep mode to SMART SLEEP.
2. Download and install the latest Debug kit straight from Apple here: http://developer.apple.com/hardwaredrivers/download/usbdebug.html
(you may need to agree to terms or whatnot)
3. Once your computer restarts after a successful install of the debug kit, try closing your lid, and make sure you have no USB or other peripherals attached to your MacBook.
Good luck

Recent podcasts of podcasts I subscribe to are not downloading when iTunes is opened

recent podcasts of podcasts I subscribe to are not downloading when iTunes is opened or Touch sync is attempted.

Presumably, you normally open iTunes and let it automatically check for new epsiodes. (The frequency with which it does this can be changed, see below.) Have you allowed it time to think about checking? My iTunes is set to check only once a day.
First of all, make sure that the Settings for Podcast downloads are still set the way you want. (Settings have been known to change - especially after iTunes updates). Look in Library/Podcasts/Settings (which is at the bottom of the Podcasts window) and makes sure that Check for new episodes: is not set to "manually" and that When new episodes are available is not set to to "do nothing".
If those settings are okay, make sure that your iTunes can still access the internet. (Can you get the the iTunes Store front page?) If other programmes can access the internet, but iTunes cannot, check that your firewall will allow iTunes access.
Let us know how you get on.

TS2972 My itunes library on my home screen does not appear on another home screen on the same computer when itunes is opened on the other screen/user. Home Sharing is turned ON. How do I fix this problem?

My itunes library on my home screen does not appear on another home screen on the same computer when itunes is opened on the other screen/user. Home Sharing is turned ON. How do I fix this problem?

You'll have to contact the developer about this. Apple doesn't make this app;

When connected via USB, my Ipod Classic 160GB mounts as a disc drive, then changes to a white drive. When iTunes automatically opens, it crashes trying to mount and/ or sync. When it times out, my only choice is to restore, but that doesn't fix problem.

I'm running OS 10.6.8 on my 3.06 GHz iMac Intel Core 2 Duo.   I recently upgraded to iTunes 10.5.2. I'm not sure when the trouble started but I attempted a restore when the iPod would not play correctly. It would start to play a file and get stuck on 0 seconds. If I put the iPod on shufle, it will stall on 0 seconds for 15 seconds or so and then move on to the next track and stall again and so on.   Seemingly randomly, it will play a few tracks but eventually start skipping again. This will continue until the battery is depleted which is fairly quick since the drive is constantly spinning.
My 160GB iPod Classic after restore attempts now is up to date with 2.0.4. and of course, nothing works as it should and I would say the skipping issue is worse than ever.
When I connect with any of three USB connectors, the iPod mounts to the desktop as a grey/silver disk drive picon exactly like the Macintosh HD picon.   Then Finder will stall for a few minutes- spinning pinwheel. Somehow, the dock is never affected and I am able to open other applications like Safari or tab through open windows- just no action on the desktop. Eventually, iTunes automatically opens and Finder becomes responsive again. At this point the grey drive picon on the desktop becomes a white drive mount picon, but the iPod does not mount in iTunes, yet. At some point, the iPod attempts to sync, iTunes crashes with the spinning pinwheel and eventually times out and I am prompted to restore the iPod again. Once restored, the iPod properly mounts under devices in iTunes and, as I have done this several times, even occasionally changes to the regular iPod picon on the desktop.
I have restored several times going as far a completely deleting iTunes from my iMac, downloading the latest directly from Apple.com, and attempting to restore again, but to no avail.
I have even used the disk utility to verify and/or repair my Macintosh HD and iPod.
It seems lots of folks are going through this ordeal. Has anyone had any success in fixing the issue, even if only temporarily?

one more detail, after a restore, when I attempt to reload music to the ipod, if I try and move, say, 20 files, the transfer seems to work as it should but then stalls on the last file. Eventually, the status will change to "Updates Files on (my ipod)" a and suggests the iPod is syncing even though I have the auto sync feature turned off.
This process eventually works itself out, and seems to take longer relative to the number of files I attempt to transfer.   Once done, howver, if I try and eject and dismount the iPod, iTunes stalls with the spinning pinwheel and I am warned that the iPod is syncing again with the spinning candy cane status bar.     Eventually thisd works itself out and the iPod dismounts from iTunes and the desktop and eventually the iPod is free to disconnect.
Then if I try and play the music I just transfered, the iPod says there is no music loaded.
Ideas?

Itunes not responding when iphone connected or when itunes is opened

When I try to open iTunes on my windows 7 computer, it will not open completely before it says its not responding. Sometimes itunes will open, but as soon as i plug in my iPhone 3s it will not respond. I do not have any podcasts on the phone.

See Here for,
http://www.apple.com/support/itunes/troubleshooting/

PC Crashes when iTunes is open

Hi there.
I am using a 64-bit version of Windows Vista.
I have iTunes 9 and whenever I open iTunes, my computer freezes. This does not always happens when I first open iTunes - sometimes it happens after I have it open for a while.
Can anyone help me out?

FYI : I have downloaded and am using the 64-bit of iTunes.

The iMac camera turns on when iTunes is open

When ever I open iTunes the build in camera turns on and if I open face time at the same time I get a message saying there aren't any cameras available

I am having the same problem since installing Mountain Lion--podcasts that I delete from iTunes are still on my devices such as iPad, iPhone and iPod Touch. How do you get them off without having to erase and reinstall everything?

What is it that resets the Music Location when iTunes starts?

So whenever you have your Music Location set to a mount on a remote device. Such as a share on a Time Capsule for instance if the mount isn't present when iTunes starts iTunes will always reset the Music Location back to it's default.
Is there a way to stop this from happening?
Can I make it so that mount is always available before iTunes or iTunes Helper starts?
Both I and my wife on her Air want to share the same remote device for our music library but we don't want iTunes to keep reseting the Music Location.

Option selects the iTunes library file, which is most likely in the /Music/iTunes folder on the Mac HD.
The iTunes music folder is on the Time Capsule which needs to be mounted.
As Robert noted, add the Time Capsule to your Login items.

Internet Explorer Issue when ITunes is open

I just installed ITunes and have already downloaded some cds. The problem is, Internet Explorer more or less becomes inactive after I open ITunes. If I open Internet Explorer first, it works fine. Once I open ITunes though, the internet more or less stops working. If I open ITunes first, Internet Explorer never loads. It's not giving me an error message or anything and the page just becomes blank. It's showing as if it is connecting to the website though. Any ideas? I will cry if I can't surf the web while importing all 200 disc I have. Thanks!
Windows XP

I have this issue since I started using iTunes last year, I keep updating the software but that hasn't helped. Various mswindows systems (2000 + XP, laptops and desktops) with and without being introduced to an iPod.
The basic scenario is that when iTunes is running, at some point the system becomes unresponsive - the windows explorer (complete UI), Lotus Notes, Firefox... it is almost like iTunes is holding a lock on a resource that the others need to redraw their screens.
The only fix I've found is to close iTunes, praying that when I restart it it'll work.
Any suggestions on things to try? Ones like "get the company to switch to a Mac" aren't helpful
-Simon.

MDNSResponder spams logs when iTunes is open

mDNSResponder[16], Excessive name conflicts (215) for 4A6DEB15A96D7E25.touch-able.tcp.local. (SRV); rate limiting in effect
That is what I'm getting to my console every 5 seconds while iTunes is open. I think it has something to do with the fact that I can't see my shared libraries through iTunes. Although when using SimplifyMedia I can see my shared library through it. I've checked my network with some Bonjour-discovery software and I saw that iTunes library sharing was discovered there but still not visible in iTunes. I'm using Little Snitch and I've tried to disable it but to no avail.
Could someone explain what that message means and what could I do to solve it? I've tried to google it but haven't found anything that could've help it.

You my want to check the preference tab in iTunes to see if your iPhone is set to auto detect. I'd look there first.

When iTunes is opened the menu does not appear properly but script does

for the past 2 months whenever i open my iTunes it opens, however not properly. I am able to see all of my songs in my library but the actual menu does not appear. I have tried reinstalling itunes multiple times as well as reinstalling quicktime. I have no idea what else to try please help!

Reset your iPad. Press and hold both the power and home buttons for 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till you iPad starts on it's own. Now try and download an app.

When iTunes is open (music playing), how do I use other programs, e.g., mail?

How to get iTunes music to play in the background.

Hi pgarard1,
If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
http://support.apple.com/kb/TS2363
Regards,
- Brenden

Inserting music cd when itunes is open causes instant reboot

Similar Messages

Maybe you are looking for