How to pass record Group from Forms with DATA_PARAMETER to Reports Server

How to pass record Group from Forms with DATA_PARAMETER to Reports Server using RUN_REPORT_OBJECT?
When we use products on run time we are using data_parameter for passing record Groups to reports via run_product but now we have to use application server and reports server for same reports.
We met with <FRM-41214 Unable to run reports> for passing DATA_PARAMETER to reports server when used RUN_REPORTS_OBJECT.
How can we pass record Group from Forms with DATA_PARAMETER to Reports Server using RUN_REPORT_OBJECT?
Thanks,
Arif

Hi Mandeep,
Could you please tell me how can i pass data parameter from forms to report through run_product.

Similar Messages

How to Pass Record Group to Reports Server ?

How to pass record Group from Forms with DATA_PARAMETER to Reports Server using RUN_REPORT_OBJECT?
When we use products on run time we are using data_parameter for passing record Groups to reports via run_product but now we have to use application server and reports server for same reports.
We met with <FRM-41214 Unable to run reports> for passing DATA_PARAMETER to reports server when used RUN_REPORTS_OBJECT.
How can we pass record Group from Forms with DATA_PARAMETER to Reports Server using RUN_REPORT_OBJECT?
Thanks,

how come the online help in forms 10g says you can?
or am I missing something.
there is a section on it.
>
Passing Record Groups to Reports or Graphics
You can pass a record group to Reports or Graphics as a DATA parameter. This DATA parameter is a special type of parameter that gives a signal to the integration code to substitute the contents of the record group whose name you give for the results of the query named by the query name you indicate.

VERY URGENT!! How to Pass a "% " symbol from form to Report

Hi
I am using oracle 10g and passing a symbol "%" as a parameter to the report from a form. But it shows error as follows:
REP-52006: Failed to decode the specified URL PARAMETER1=%.
But it is working when it runs in the Report directly.
Then Why we can't pass the symbol "%" to the report from form.
Please reply me as soon as possible. IT IS VERY URGENT !!

Hi,
Try using a lexical parameter(&parm_1) for a string of values or a bind parameter(:parm_1) for a single value
Thanks,
Kimosabe

Passing record group (data_parameter) to reports server

Hi Frank,
I am using web.show_document for passing parameters to reports.
It is working fine with text_parameter.
Is it possible to pass record group thro' web.show_document?? If not possible,give alternate solution by example.
Regards-
Onkar Vidwans
INDIA

Hi Mandeep,
Could you please tell me how can i pass data parameter from forms to report through run_product.

How to pass a parameter from one action1 in block1 to action2 in block2.

Dear Experts,
How to pass a parameter from one action1 in block1 to action2 in block2.
My Process Structure is as follows..
       Process
            Sequential Block
                 Action 1
                 Parallel Dynamic Block
                         Sequential Sub Block
                         Action 2.
while i am trying to execute the action1 the following error is shown below:
Cannot complete action: The activity could not be read.
Please suggest me how to do?
Regards,
Rajesh N

Hello Rajesh!
I think you are talk about the mapping parameters of your process.
This case in design time of your workflow, you have the vision of your blocks and actions, you have on action 1 the output parameter and you have the action 2 an input parameter.
So you have that make a group mapping on your process, map in this group the action1 outpu parameter with the action2 input parameter.
Regards, Ronaldo Rampelotti

How to synchronize a cell in form with a cell in MS excel sheet

dear all
I can successfuly export data to excell using the ole2 package. But the problem is that exporting data from A datablock in a form to Excel sheet is not enough.
I need to automaticaly copy updates occures on the datablock to its equilivant in the excel sheet. In other words , i need to synchronize my datablock items with facing cells in the excel sheet,so the cells'values in excel sheet automatiacly changes to be the values in the datablock items
please help

Dear all
I can successfuly export data to excell using the ole2 package. But the problem is that exporting data from A datablock in a form to Excel sheet is not enough.
I need to automaticaly copy updates occures on the datablock to its equilivant in the excel sheet. In other words , I need to synchronize my datablock items with facing cells in the excel sheet,so the cells'values in excel sheet automatiacly changes to be the values in the datablock items
I searched the web several times . Some people adviced me to use "Apache-jakarta-poi" . It is a pure java code. But my knoledge in java is limited.I asked on Oracle forums -
how to synchronize a cell in form with a cell in MS excel sheet - but no one can help
I tried the oracle forms demo "OLEEXCEL.fmb" . But this form is not working correct .
I need to embed ole2 in my form that holds excel sheet and passes values from text items to the excel sheet.
My last try is that I did the following :
1- in the main canvas i insert the OLE2 control
2- Right Click and choose insert
3- from the dialog i chosed Excel Sheet
4- I placed a button on my canvas then i on the button I write this code
declare
worksheet ole2.obj_type;
cell ole2.obj_type;
args ole2.list_type;
begin
forms_ole2.activate_server('block1.excel_sheet');
worksheet := forms_ole2.get_interface_pointer('block1.excel');
args := ole2.create_arglist;
ole2.add_arg(args,1) -- column1
ole2.add_arg(args,1) -- cell1
cell := ole2.invoke_obj(worksheet,'cell',args);
ole2.destroy_arglist(args);
ole2.set_property('cell','value',:text1);
ole2.release_obj(cell);
ole2.release_obj(worksheet);
end;
I get this error ora-305500
and when i debug , the code stop in this line : cell := ole2.invoke_obj(worksheet,'cell',args);
please help

Passing record group to the report...

Hi
I am using form 6i ..
I have got error while passing record group to the report
Here is the code... , I Wrote it when_button_pressed trigger
declare
     pl_id paramlist;
begin
pl_id := Get_Parameter_List('tmpdata');
     IF NOT ID_NULL(pl_id) then
          destroy_parameter_list(pl_id);
     end if;
     pl_id:=create_parameter_list('tmpdata');
ADD_PARAMETER(pl_id,'NICE_QUERY',DATA_PARAMETER,'NICE_REC' );
Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
     RUN_PRODUCT(REPORTS,'E:\DEPT',SYNCHRONOUS,RUNTIME,FILESYSTEM,PL_ID);
The error is frm-47012 There is no record group with this name nice_rec......
Thanks

The error message (FRM-47012) is very specific. Do you have a Record Group defined in the Record Group Node of the Navigator called 'NICE_REC'?
Hope this helps.
Craig...
-- If my response or the response of another is helpful or answers your question, please mark the response accordingly. Thanks!

How to pass the data from a input table to RFC data service?

Hi,
I am doing a prototype with VC, I'm wondering how VC pass the data from a table view to a backend data service? For example, I have one RFC in the backend system with a tabel type importing parameter, now I want to pass all the data from an input table view to the RFC, I guess it's possible but I don't know how to do it.
I try to create some events between the input table and data service, but seems there is no a system event can export the whole table to the backend data service.
Thanks for your answer.

Thanks for your answer, I tried the solution 2, I create "Submit" button, and ser the mapping scope to be "All data rows", it only works when I select at least one row, otherwise the data would not be passed.
Another question is I have serveral imported table parameter, for each table I have one "submit" event, I want these tables to be submitted at the same time, but if I click the submit button in one table toolbar, I can only submit the table data which has a submit button clicked, for other tables, the data is not passed, how can I achieve it?
Thanks.

How to get real value from selectOneChoice with javascript?

Hi,
How to get real value from selectOneChoice with javascript? The event.getNewValue() only gets me the index of the selected item, not the value/title.
JSF page:
<af:resource type="javascript">
function parseAddress(event)
alert("new value: " + event.getNewValue());
</af:resource>
<af:selectOneChoice label="Location:" value="" id="soc4">
<af:clientListener type="valueChange" method="parseAddress" />
<f:selectItems value="#{Person.locations}" id="si7"/>
</af:selectOneChoice>
HTML :
<option title="225 Broadway, New York, NY-10007" selected="" value="0">225 Broadway (Central Office)</option>
<option title="90 Mark St., New York, NY-10007" value="1">90 Mark St. (Central Office)</option>
Thanks a lot.

Something I was missing ,
You need to add valuePassThru="true" in your <af:selectOneChoice component. I have personally tested it and got the actual value in alert box. I hope this time you got the real solution. You can also test the following code by your end.
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1">
<af:form id="f1">
<af:panelBox text="PanelBox1" id="pb1">
<af:selectOneChoice label="Set Log Level" id="soc1"
value="#{SelectManagedBean.loggerDefault}"
valuePassThru="true">
<af:selectItem label="select one" value="First" id="s6"/>
<af:selectItem label="select two" value="Second" id="s56"/>
<af:clientListener method="setLogLevel" type="valueChange"/>
</af:selectOneChoice>
<af:resource type="javascript">
function setLogLevel(evt) {
var selectOneChoice = evt.getSource();
var logLevel = selectOneChoice.getSubmittedValue();
// var logLevelObject = AdfLogger.NONE;
alert("new value is : " + logLevel);
//alert(evt.getSelection);
//alert(logLevelObject);
evt.cancel();
</af:resource>
</af:panelBox>
</af:form>
</af:document>
</f:view>
</jsp:root>

How to pass multiple values from master to child report

Hello,
How would I pass multiple prompts from the master to child report? So for example, say I want to pass a 'Country' value along with a 'City' value
Would it be?
="<a href=\"../../opendoc/openDocument.jsp?iDocID=ASQlgCemIOlEid1HHUlzyPs&sDocName=DocTest&sIDType=CUID&sType=wid&sWindow=Same&lsSCountry="+[Country]+"&lsSCity="+[City]+"\</a>"
Thanks,
Carter

Carter,
what is the syntax for this?
It is exactly how you have posted in your original note.
"&lsSCountry="+[Country]+"&lsSCity="[City]
This will work providing the target report has a prompt called "Country" and another prompt called "City". Note that your prompt and what you pass between the &lsS and the equal (=) must match exactly, otherwise OpenDocument will not communicate the prompt title to InfoView properly and InfoView will stop and execute the prompt to get the info it needs before running the report. Have you tried what you've posted originally to see if it executes without a problem?
Thanks,
John

How to pass a JavaBean from servlet to JSP?

Hi there,
I am working on a project that needs to handle quite a few client requests and I want to use the Front Controller pattern that is described in the J2EE pattern page.
The steps described in the front controller pattern is that:
1. A servlet (controller) process the client request.
2. It calls the appropriate cammand object and the cammand object gets the data from the data source and returns a JavaBean that contains the required data.
3. The servlet dispatch to the appropriate View (jsp page)
4. The JSP page displays the data in the JavaBean to the user.
However, I don't know how to pass the JavaBean from the servlet to the JSP page when the servlet forwards the control to the JSP page. Should I make the JavaBean with a request scope or higher? If so, how to uses it in the JSP page? Just refer by the ID of the JavaBean.
If any one knows there is an example or tutorial on how to use this pattern, please let me know.
Thank you !
Regards
Edmund

Could you please give more info? i tried to do this, but always get a "Class not found exception":
response$jsp.java:65: Class org.apache.jsp.TestBean not found. TestBean bean = null;
although the class TestBean (no package name => defalt package) is in the WAR file and the Servlet seems to instantiate it (otherwise an exception would occur sooner in the TestServlet code).
my JSP code is:
<%@ page language="java" info="Response page" %>
<jsp:useBean id="bean" class="TestBean" />
<%
TestBean bean2 = (TestBean) request.getAttribute("TheBean");
%>
<html>
<body>
Your value: <%= bean2.getValue() %><BR>
My val: <%= bean2.getNewValue() %><BR>
<P>
Date: <%= new Date() %>
<P>
Neuen Wert eingeben
</body>
</html>
--------------

How to read appended objects from file with ObjectInputStream?

Hi to everyone. I'm new to Java so my question may look really stupid to most of you but I couldn't fined a solution by myself... I wanted to make an application, something like address book that is storing information about different people. So I decided to make a class that will hold the information for each person (for example: nickname, name, e-mail, web address and so on), then using the ObjectOutputStream the information will be save to a file. If I want to add a new record for a new person I'll simply append it to the already existing file. So far so good but soon I discovered that I can not read the appended objects using ObjectInputStream.
What I mean is that if I create new file and then in one session save several objects to it using ObjectOutputStream they all will be read with no problem by ObjectInputStream. But after that if in a new session I append new objects they won't be read. The ObjectInputStream will read the objects from the first session after that IOException will be generated and the reading will stop just before the appended objects from the second session.
The following is just a simple test it's not actual code from the program I was talking about. Instead of objects containing different kind of information I'm using only strings here. To use the program use as arguments in the console "w" to create new file followed by the file name and the strings you want save to the file (as objects). Example: "+w TestFile.obj Thats Just A Test+". Then to read it use "r" (for reading), followed by the file name. Example "+r TestFile.obj+". As a result you'll see that all the strings that are saved in the file can be successfully read back. Then do the same: "+w TestFile.obj Thats Second Test+" and then read again "+r TestFile.obj+". What will happen is that the strings only from the first sessions will be read and the ones from the second session will not.
I am sorry for making this that long but I couldn't explain it more simple. If someone can give me a solution I'll be happy to hear it! ^.^ I'll also be glad if someone propose different approach of the problem! Here is the code:
import java.io.*;
class Fio
     public static void main(String[] args)
          try
               if (args[0].equals("w"))
                    FileOutputStream fos = new FileOutputStream(args[1], true);
                    ObjectOutputStream oos = new ObjectOutputStream(fos);
                    for (int i = 2; i < args.length ; i++)
                         oos.writeObject(args);
                    fos.close();
               else if (args[0].equals("r"))
                    FileInputStream fis = new FileInputStream(args[1]);
                    ObjectInputStream ois = new ObjectInputStream(fis);
                    for (int i = 0; i < fis.available(); i++)
                         System.out.println((String)ois.readObject());
                    fis.close();
               else
                    System.out.println("Wrong args!");
          catch (IndexOutOfBoundsException exc)
               System.out.println("You must use \"w\" or \"r\" followed by the file name as args!");
          catch (IOException exc)
               System.out.println("I/O exception appeard!");
          catch (ClassNotFoundException exc)
               System.out.println("Can not find the needed class");

How to read appended objects from file with ObjectInputStream? The short answer is you can't.
The long answer is you can if you put some work into it. The general outline would be to create a file with a format that will allow the storage of multiple streams within it. If you use a RandomAccessFile, you can create a header containing the length. If you use streams, you'll have to use a block protocol. The reason for this is that I don't think ObjectInputStream is guaranteed to read the same number of bytes ObjectOutputStream writes to it (e.g., it could skip ending padding or such).
Next, you'll need to create an object that can return more InputStream objects, one per stream written to the file.
Not trivial, but that's how you'd do it.

How to pass the value from Sub report to main report

I have un report(mainreport) within a subreport(subreport).
With reporting services, how to pass the value from Sub report to main report?
thanks

Hi Alebet,
With reporting services to pass values from sub report in to main report is not supported directly.
But there are some workarounds through which you can get this .
There are two ways to get this.
1- Put your sub report query into some table. i mean to say through the subreport query get some temporary table.
2- Using this temporary tables data write some Scala function in the data base.
3- Now in your main report query return this scala function as a column.
4- Extract the column value where ever you want in your main report which is getting calculated from the subreport query. so you will be getting the values returned from the subreport in the main report.
This will definitely work fine as i have done some report in this way.
Another way of doing is that
1- prepare another data set with the same query as in sub report in the data tab.
2- then refer this 2nd dataset in your main report .
But better way will be the top one.
Anyway please let me know if you get the solution.
Thanks
Mahasweta

How to call Java class from Forms 6i?

Hi friends,
I need to call a Java class from my Forms 6i application.
(It runs under WIndows XP. It's a client/server application and I have only the client and the Form builder installed on my PC)
I don't know almost anything about Java's world so your help would be very useful for me.
Could you tell me exactly what i have to do?
I've read in metalink several Notes, but they supposed that the Java architecture is already installed in the computer.... I only have the default installation of Developer 6i... so I would need to know:
- How to install/configure the neccesary to execute Java classes without problem
- How to invoke the .class from Forms 6i.
Thanks a lot
Jose.

And also this one:
Problem Description
Installed Forms 6i Rel 2 on a MS Windows machine. When trying to Import the Java
Classes getting the errors
PDE-UJI0001 Failed to create the JVM
Solution Description
You need to to install JDK 1.2.2 to run the Java Importer. And set the PATH's
and classpath's correctly.
Explanation
1. Download and install the JDK 1.2.2.
Possibly available at: http://java.sun.com/products/archive/
2. Assuming the JDK 1.2.2 is installed in c:\jdk1.2.2 directory and the JRE in
C:\PROGRA~1\JAVASOFT\JRE\1.2 directory; ORACLE_HOME=C:\Dev6iR2.
Set the PATH to
set PATH=c:\jdk1.2.2\bin;C:\PROGRA~1\JAVASOFT\JRE\1.2\bin;C:\PROGRA~1\JAVASOFT\JRE\1.2\bin\classic;%PATH%
( If you are using ias9i then the JDK 1.2.2 comes with the ias installtion ,
in this case please set the PATH to
D:\ias9i\Apache\jdk\bin;D:\ias9i\Apache\jdk\jre\bin;D:\ias9i\Apache\jdk\jre\bin\classic;%PATH% )
3. Set the CLASSPATH to set CLASSPATH=%CLASSPATH%;C:\Dev6iR2\TOOLS\COMMON60\JAVA\IMPORTER.JAR;.
(If you do not set the CLASSPATH correctly you will get the error
PDE-UJI002 Unable to find the required java importer classes)
4. Now run the Forms Builder by using the command.
C:\Dev6iR2\bin\ifbld60.exe
Now the Java Importer Should Run fine.
Francois

How to pass an object from jsp to other jsp using SendRedirect

How to pass an object from one jsp to the other jsp using ssendRedirect with out using the session
I am having 2 jsps
x.jsp and y.jsp
From x.jsp using sendRedirect iam going to y.jsp
From x.jsp i have pass an object to the y.jsp
Is it possible without putting the object in session
Is it possible using EncodeUrl
Please help me Its Urgent

Is it possible without putting the object in sessionAnything is possible. Would you accept that it is very difficult?
When you send a redirect, it tells the browser to send a new request for the target page. That means any request parameters/attributes are lost.
Is it possible using EncodeUrl response.encodeURL() puts the session id into a url if the browser does not support cookies. It is purely for retaining the session.
There are two ways that you can communicate across a sendRedirect.
1 - use the session
2 - pass a parameter in the url.
parameters are string based, so passing objects is almost out of the question.
Potentially you could serialize your object, encode it in base64 (so it is composed completely as characters) and pass it as a parameter to the other page, where you retrieve it, unencode it, and then load the serialized object.
Or you can just use the session.

How to pass record Group from Forms with DATA_PARAMETER to Reports Server

Similar Messages

Maybe you are looking for