How to pass tables in Guided Procedures from VC

Hi experts!
I'am working in a workflow scenario, more precisely an approve-reject workflow scenario.
I've defined all the start and the end points belonging to the respective iviews (I mean the sender and the approver iviews), following the [Modeling Visual Composer iViews for Guided Procedures|http://help.sap.com/saphelp_nw70/helpdata/en/44/429bbd709914bce10000000a155369/frameset.htm]
and everything works ok if I pass input fields, data fields, or boolean fields.
But I need to pass tables (In fact, I need to pass MORE THAN ONE table).... Is that possible?
How do I make it?
Any help will be apprecieated and point-rewarded.
Thanks in advance
Best Regards,
Marcelo
P.S. I'm working on EP7 VC SP15

Hi,
If you'll create 2 iViews:
1. Table connected to end point (all the fields are mapped and table selection mode is multiple)
2. Table connected to start point with same fields.
and create GP process for it, you'll find that selecting all the fields and passing them will result with all the selected fields appear in the 2nd iView.
But, i don't know if you can pass the entire table automatically (without the user selecting all the records).
Hope I helped,
Shay

Similar Messages

How to export and import Guide Procedure from one portal to another portal

Hi all,
I have accomplished a Guide Procedure on one portal, but I want to export this Guide Procedure and import it to another portal, please tell me what can I do?
Best regards & Thanks!

Sam,
Did you get to check this help document yet.
http://help.sap.com/saphelp_nw70/helpdata/EN/69/31d0cdb7094d00aa11f935221fb5bf/frameset.htm
Hope this helps.
Good Luck!
Sandeep Tudumu

Pass table name to procedure

hi
Can any one plz suggest me , how to pass
table name (that would be varchar) to a procedure,such that i
should be able to do DML and DDL on the table refered !!

EXECUTE IMMEDIATE executes the SQL statement held in a specified
VARCHAR2. So, with a bit of string concatenation, you can make
the statement dynamic, thus:
EXECUTE IMMEDIATE 'DELETE * FROM emp' ;
could become:
EXECUTE IMMEDIATE 'DELETE * FROM '||p_table_name ;
where p_table_name is a VARCHAR2 parameter passed into your
procedure. Check out the PL/SQL User's Guide and Reference,
chapter 10, for full details.

How to pass table data to brf plus application through abap program

Dear All,
i have a question related to BRF Plus management through abap program.
In brf plus application end, Field1,field2,field3 these 3 are importing parameters.
Table1->structure1->field4,field5 this is the table,with in one structure is there and 2 fields.
in my abap program, i am getting values of fields let us take field1,field2,field3,field4,field5.
And my question is
1) How to pass fields to BRF Plus application from abap program.
2)How to pass Table data to BRF Plus application from abap program.
3)How to pass Structure data to BRF Plus application from abap program.
4)How to get the result data from BRF Plus application to my abap program.
And finally , how to run FDT_TEMPLATE_FUNCTION_PROCESS.
How do i get the code automatically when calling the function in brf plus application.
Regards
venkata.

Hi Prabhu,
Since it is a Custom Fm i cant see it in my system.
Look if u want to bring data in internal table then there could be two ways::
1) your FM should contain itab in CHANGING option , so that u can have internal table of same type and pass through FM,
2) read values one by one and append to internal table.
Thanks
Rohit G

How to Pass table-structure-fields data to BRF PLUS Application

Dear Eperts,
i have a question related to BRF Plus management through abap program.
In brf plus application end, Field1,field2,field3 these 3 are importing parameters.
Table1->structure1->field4,field5 this is the table,with in one structure is there and 2 fields.
in my abap program, i am getting values of fields let us take field1,field2,field3,field4,field5.
And my question is
1) How to pass fields to BRF Plus application from abap program.
2)How to pass Table data to BRF Plus application from abap program.
3)How to pass Structure data to BRF Plus application from abap program.
4)How to get the result data from BRF Plus application to my abap program.
And finally , how to run FDT_TEMPLATE_FUNCTION_PROCESS.
How do i get the code automatically when calling the function in brf plus application.
Regards
venkata.

Hi Venkat,
As said by Jocelyn Dart, you need to go through BRF+ tutorials.
-->You can see a on of the tutorial from the below link
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/50879cee-f9b5-2e10-039e-b2d6c4b10e6b

How to pass table data into below code for alv

hi
i want to pass table data into alvgrid
i dont know how to pass table data.
here instead of passing ABC into internal table
i want to pass table data .
please help me
ialv-test1 = 'ABC'.
form get_data.
ialv-test1 = 'ABC'.
ialv-test2 = 'DEF'.
append ialv.
ialv-test1 = 'GHI'.
ialv-test2 = 'JKL'.
append ialv.
ialv-test1 = '123'.
ialv-test2 = '456'.
append ialv.
endform
thanks in advanced.

Have a look at below links. It gives you sample code of alv grid.
http://sap.niraj.tripod.com/id64.html
http://www.sap-img.com/abap/sample-programs-on-alv-grid.htm
Have a look at below links for SAP Help.
http://help.sap.com/saphelp_nw04/helpdata/en/8d/e994374c9cd355e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/12/904f42d5f811d2b469006094192fe3/content.htm
Best Regards,
Vibha
*Please mark all the helpful answers

How to import tables, indexes, tablespace, etc from a DMP.

Hello,
I like to know how to import tables, indexes, tablespace, etc from an DMP export of a Oracle 10.2.0.1 to be apply on a Oracle 11.2.0. When I import the DMP file all the data is going to one single Tablespace, for example, Users tablespace.
On the original database we have various tablespace's each separated with different content (tables, indexes) and I like to know if it posible to import the same schema,tables, indexes, tablespace all made with one single DMP Export. I can't use DBUA because the software of the database on the 10.2 is missing, I have only a DMP file (24GB) of DMP!.
Thanks for the reply,
Sorry for my english :).
Regards.

thanks for that but is not what Im looking for.
Look, on my ORCL directory of the oracle 10.2 I have for example this:
CONTROL01.CTL
EXAMPLE01.DBF
REDO01-1.LOG
REDO01.LOG
REDO02-2.LOG
REDO02.LOG
REDO03-3.LOG
REDO03.LOG
RMAN.DBF
SYSAUX01.DBF
SYSTEM01.DBF
TEMP01.DBF
UNDOTBS01.DBF
USERS01.DBF
TABLESPACE1.ORA
TABLESPACE2.ORA
TABLESPACE3.ORA
TABLESPACE4.ORA
TABLESPACE5.ORA
I make a full export to a DMP. Then in my 11.2 version first I created the user then when import the DMP file none of the tablespace (TABLESPACE1, TABLESPACE2, ETC...) is created, all is going to the USERS tablespace, SO, im looking a way to tell imp command that generates the exactly tablespace structure that i was have on the 10.2.
Hope this can explain more my problem.
Thanks again!.

How to pass table type variable into function from SQL*PLUS ?

How to pass a table type variable from sql*plus prompt into a function ?
Thanx in advance.

Krishna,
Do you mean like this?SQL> DECLARE
2      TYPE t_tbl IS TABLE OF VARCHAR2(20);
3      l_sample_tbl           t_tbl;
4
5      FUNCTION print_contents ( p_tbl IN t_tbl )
6      RETURN VARCHAR2
7      IS
8          l_string            VARCHAR2(1000);
9      BEGIN
10          FOR i IN 1..p_tbl.COUNT LOOP
11              IF (i = 1) THEN
12                  l_string := p_tbl(i);
13              ELSE
14                  l_string := l_string || ', ' || p_tbl(i);
15              END IF;
16          END LOOP;
17          RETURN (l_string);
18      END print_contents;
19
20 BEGIN
21      l_sample_tbl := t_tbl();
22      l_sample_tbl.EXTEND;
23      l_sample_tbl(1) := 'one';
24      l_sample_tbl.EXTEND;
25      l_sample_tbl(2) := 'two';
26      l_sample_tbl.EXTEND;
27      l_sample_tbl(3) := 'three';
28      l_sample_tbl.EXTEND;
29      l_sample_tbl(4) := 'four';
30      l_sample_tbl.EXTEND;
31      l_sample_tbl(5) := 'five';
32      DBMS_OUTPUT.PUT_LINE(print_contents(l_sample_tbl));
33 END;
34 /
one, two, three, four, five
PL/SQL procedure successfully completed.
SQL> HTH,
T.

How to pass tables data from SAP script to the routine.

Hi,
I have standard program RPCTEAL0_01 which calls a SAP script form(Custom) to print the form.
Now I have to add some additional functionality to change the values in the form. Since it is custom form I can add ROUTINE and then pass the values to the custom program to modify the variables.
My concern here, I would like to pass the tables like RT,CRT to the custom program via form.
Is this possible? RT and CRT filled by standard progam.
Regarsd
Eswar
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Jan 20, 2009 9:06 AM

Hi, The suggested option is not working.
Actually I am using the below code in SCRIPT
/:   PERFORM CAL_2008 IN PROGRAM ZHR_TEST1
/:   USING &PER_NO&
/:   CHANGING &W12&
/:   ENDPERFORM
and calling form in ZHR_TEST1. But this will pass only variables. Now my requirement is to pass tables also.

Memory leak problem while passing Object to stored procedure from C++ code

Hi,
I am facing memory leak problem while passing object to oracle stored procedure from C++ code.Here I am writing brief description of the code :
1) created objects in oracle with the help of "create or replace type as objects"
2) generated C++ classes corresponding to oracle objects with the help of OTT utility.
3) Instantiating classes in C++ code and assigning values.
4) calling oracle stored procedure and setting object in statement with the help of setObject function.
5) deleted objects.
this is all I am doing ,and getting memory leak , if you need the sample code then please write your e-mail id , so that I can attach files in reply.
TIA
Jagendra

just to correct my previous reply , adding delete statement
Hi,
I am using oracle 10.2.0.1 and compiling the code with Sun Studio 11, following is the brief dicription of my code :
1) create oracle object :
create or replace type TEST_OBJECT as object
( field1 number(10),
field2 number(10),
field3 number(10) )
2) create table :
create table TEST_TABLE (
f1 number(10),f2 number (10),f3 number (10))
3) create procedure :
CREATE OR REPLACE PROCEDURE testProc
data IN test_object)
IS
BEGIN
insert into TEST_TABLE( f1,f2,f3) values ( data.field1,data.field2,data.field3);
commit;
end;
4) generate C++ classes along with map file for database object TEST_OBJECT by using Oracle OTT Utility
5) C++ code :
// include OTT generate files here and other required header files
int main()
int x = 0;
int y = 0;
int z =0;
Environment *env = Environment::createEnvironment(Environment::DEFAULT);
Connection* const pConn =
env->createConnection"stmprf","stmprf","spwtrgt3nms");
const string sqlStmt("BEGIN testProc(:1) END;");
Statement * pStmt = pConn->createStatement(sqlStmt);
while(1)
TEST_OBJECT* pObj = new TEST_OBJECT();
pObj->field1 = x++;
pObj->field2 = y++;
pObj->field3 = z++;
pStmt->setObject(1,pObj);
pStmt->executeUpdate();
pConn->commit();
delete pObj;
}

How to pass Tables through program line.

Hi All,
I have requirment in smart forms.
I need to execute smartforms in form itself. means no chance to run with driver program.
So i created program line which where write our logic for internal table. My question is how to pass created internal table from program line. i need to display the internal table data using loop.
Thanks,
Subbu

Hi,
Try this :
code
REPORT report2.
DATA: text TYPE c LENGTH 10,
rspar_tab TYPE TABLE OF rsparams,
rspar_line LIKE LINE OF rspar_tab,
range_tab LIKE RANGE OF text,
range_line LIKE LINE OF range_tab.
rspar_line-selname = 'SELCRIT1'.
rspar_line-kind = 'S'.
rspar_line-sign = 'I'.
rspar_line-option = 'EQ'.
rspar_line-low = 'ABAP'.
APPEND rspar_line TO rspar_tab.
range_line-sign = 'E'.
range_line-option = 'EQ'.
range_line-low = 'H'.
APPEND range_line TO range_tab.
range_line-sign = 'E'.
range_line-option = 'EQ'.
range_line-low = 'K'.
APPEND range_line TO range_tab.
SUBMIT report1 USING SELECTION-SCREEN '1100'
WITH SELECTION-TABLE rspar_tab
WITH selcrit2 BETWEEN 'H' AND 'K'
WITH selcrit2 IN range_tab
AND RETURN.
[/code]
Reward points if found helpful.....
Cheers,
Chandra Sekhar.

Start Guided Procedures from WebFlow

Hi again!
Now we maybe found a way to start a Guided Procedures Process from SAP WebFlow. But then we encountered another problem.
To transfer parameters from SAP WebFlow via container-elements to the GP the SAP WebFlow parameters have to be equal with the technical parameters of Guided Procedures.
The problem is that Guided Procedures assigns the technical parameters automatically and adds a point and the number of the parameter.
The idea behind should be to differ parameters with the same name.
For example:
AUFNR = AUFNR.1
another parameter with the same name gets the technical name
AUFNR = AUFNR.2
But SAP WebFlow, especially ABAP, interprets a point as the end of a statement.
So you can not use elements in your container with a point (AUFNR.1)
My question.
Is it possible to affect the automatic allocation of a technical name of a parameter in Guided Procedures to avoid the point in that parameter?
I hope that there is someone who can help me.
It would be absurd if the parameter passing would fail solely because the technical names of GP-parameters contain a point.
Thanks for answers of every description

Answered

How to pass table contents to Workflow?

hi all,
my workflow accepts a table as input. when i execute the Workflow from SWUS i can enter the table contents.
Now how to pass these <b>table contents to workflow through Function module</b>
say the table has 3 columns and 5 rows.
regards.
Subba

very Helpful answer.
i referred to the below link.
<a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/e4b130453d11d189430000e829fbbd/frameset.htm">http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/e4b130453d11d189430000e829fbbd/frameset.htm</a>
my workflow input container is a tableas below:
table: ZEMPLOYEE
Empid    empname     empaddress
<b>0001     john        texas
0002     jay         india
0003     hassan      karachi</b>
so how to declare the container and pass these values to the container through function module. Also what is object type and object key, i have not defined any object type and object key. just a direct table contents to be imported into Workflow.
regards,
Subba

How to call a PL/SQL procedure from a Java class?

Hi,
I am new to the E-BusinessSuite and I want to develop a Portal with Java Portlets which display and write data from some E-Business databases (e.g. Customer Relationship Management or Human Resource). These data have been defined in the TCA (Trading Community Architecture) data model. I can access this data with PL/SQL API's. The next problem is how to get the data in the Java class. So, how do you call a PL/SQL procedure from a Java program?
Can anyone let me know how to solve that problem?
Thanks in advance,
Chang Si Chou

Have a look at this example:
final ApplicationModule am = panelBinding.getApplicationModule();
try
     final CallableStatement stmt = ((DBTransaction)am.getTransaction()).
                                                                                     createCallableStatement("{? = call some_pck.some_function(?, ?)}", 10);
     stmt.registerOutParameter(1, OracleTypes.VARCHAR);
     stmt.setInt(2, ((oracle.jbo.domain.Number)key.getAttribute(0)).intValue());
     stmt.setString(3, "Test");
     stmt.execute();
     stmt.close();
     return stmt.getString(1);
catch (Exception ex)
     panelBinding.reportException(ex);
     return null;
}Hope This Helps

How to pass back results of gATP from APO to R/3

Dear all,
we're currently working on a gATP implementation and face following open challenges for which we kindly ask you for your valuable support:
1.) We need to pass back the allocated CVC of the gATP (product allocation) check from APO to z-append fields of VBAP. In order to do that we implemented additional field catalog fields which are updated in one of the product allocation userexits on APO side. Using an enhancement of form MVERF_PRUEFEN in SAPFV45V the data which is passed back from APO to R/3 via field_catalog can be written into the respective VBAP fields. ONLY: this doesn't work for a "complete delivery only" customer/order as MVERF_PRUEFEN is not called in such a case.
---> Do you have any proposals where/how to implement the functionality to write back the results passed back by APO into VBAP fields?
2.) In case of incomplete confirmation (not enough qty) the "APO Product Availability Overview" screen appears. We do not want to show this screen in APO to our users. There should be just a warning message but not this full screen. Do you have any ideas how to turn off the screen (similar to what happens if the order is posted in background)
Thanks again for your great input and help!
M.

Dear Mohan,
thanks for your reply.
We actually use the functionality you described already for passing the required additional information from R/3 to APO. What we're currently searching, is a solution to pass back results (such as the allocated CVC or additional information from APO) from APO back to R/3 and store it there in VBAP-appends.
Thanks,
Maawdee
Edited by: Maawdee on Jun 25, 2010 9:18 AM

How to pass tables in Guided Procedures from VC

Similar Messages

Maybe you are looking for