How to pass tables data from SAP script to the routine.

Hi,
I have standard program RPCTEAL0_01 which calls a SAP script form(Custom) to print the form.
Now I have to add some additional functionality to change the values in the form. Since it is custom form I can add ROUTINE and then pass the values to the custom program to modify the variables.
My concern here, I would like to pass the tables like RT,CRT to the custom program via form.
Is this possible? RT and CRT filled by standard progam.
Regarsd
Eswar
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Jan 20, 2009 9:06 AM

Hi, The suggested option is not working.
Actually I am using the below code in SCRIPT
/:   PERFORM CAL_2008 IN PROGRAM ZHR_TEST1
/:   USING &PER_NO&
/:   CHANGING &W12&
/:   ENDPERFORM
and calling form in ZHR_TEST1. But this will pass only variables. Now my requirement is to pass tables also.

Similar Messages

How to call a subroutine from sap script

hi friends,
Can anybody tell me How to call a subroutine from sap script .
thanks n regards .
Mahesh

hi..
Calling ABAP Subroutines: PERFORM
You can use the PERFORM command to call an ABAP subroutine (form) from any program, subject to the normal ABAP runtime authorization checking. You can use such calls to subroutines for carrying out calculations, for obtaining data from the database that is needed at display or print time, for formatting data, and so on.
PERFORM commands, like all control commands, are executed when a document is formatted for display or printing. Communication between a subroutine that you call and the document is by way of symbols whose values are set in the subroutine.
The system does not execute the PERFORM command within SAPscript replace modules, such as TEXT_SYMBOL_REPLACE or TEXT_INCLUDE_REPLACE. The replace modules can only replace symbol values or resolve include texts, but not interpret SAPscript control commands.
Syntax in a form window:
/: PERFORM <form> IN PROGRAM <prog>
/: USING &INVAR1&
/: USING &INVAR2&
/: CHANGING &OUTVAR1&
/: CHANGING &OUTVAR2&
/: ENDPERFORM
INVAR1 and INVAR2 are variable symbols and may be of any of the four SAPscript symbol types.
OUTVAR1 and OUTVAR2 are local text symbols and must therefore be character strings.
The ABAP subroutine called via the command line stated above must be defined in the ABAP report prog as follows:
FORM <form> TABLES IN_TAB STRUCTURE ITCSY
OUT_TAB STRUCTURE ITCSY.
ENDFORM.
The values of the SAPscript symbols passed with /: USING... are now stored in the internal table IN_TAB . Note that the system passes the values as character string to the subroutine, since the field Feld VALUE in structure ITCSY has the domain TDSYMVALUE (CHAR 80). See the example below on how to access the variables.
The internal table OUT_TAB contains names and values of the CHANGING parameters in the PERFORM statement. These parameters are local text symbols, that is, character fields. See the example below on how to return the variables within the subroutine.
From within a SAPscript form, a subroutine GET_BARCODE in the ABAP program QCJPERFO is called. Then the simple barcode contained there (First page, Next page, Last page) is printed as local variable symbol.
Definition in the SAPscript form:
/: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
/: USING &PAGE&
/: USING &NEXTPAGE&
/: CHANGING &BARCODE&
/: ENDPERFORM
/ &BARCODE&
Coding of the calling ABAP program:
REPORT QCJPERFO.
FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA: PAGNUM LIKE SY-TABIX, "page number
NEXTPAGE LIKE SY-TABIX. "number of next page
READ TABLE IN_PAR WITH KEY PAGE.
CHECK SY-SUBRC = 0.
PAGNUM = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY NEXTPAGE.
CHECK SY-SUBRC = 0.
NEXTPAGE = IN_PAR-VALUE.
READ TABLE OUT_PAR WITH KEY BARCODE.
CHECK SY-SUBRC = 0.
IF PAGNUM = 1.
OUT_PAR-VALUE = |. "First page
ELSE.
OUT_PAR-VALUE = ||. "Next page
ENDIF.
IF NEXTPAGE = 0.
OUT_PAR-VALUE+2 = L. "Flag: last page
ENDIF.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.
regards,
veeresh

How to get purchasing data from SAP R/3 to OWB (Oracle warehouse builder).

Hi,
My name is Pavan Tata. I work as a SAP BW developer. Here is the situation at my client place. Client decided to retire BW system and wants to replace with OWB(Oracle warehouse). In all this currently we have purhchasing application in BW production system and wants to move this application to OWB for the same type of reporting what they are getting currently.
Here is my question:
How to get purchasing data from SAP R/3 to OWB(Warehouse) with initial full loads and deltas mechanism in the same way as we do in BW.
Please help on this, also send me any documentation about this if you have.
Thanks,
Pavan.

Hello,
here is a short report which converts S012 entries to strings with separator semicolon. Perhaps this will help you?
Regards
Walter Habich
REPORT habitest2 LINE-SIZE 255.
TYPES:
strtab_t TYPE TABLE OF string.
CONSTANTS:
separator VALUE ';'.
DATA:
it_s012 LIKE s012 OCCURS 0,
wa_s012 LIKE s012,
strtab TYPE strtab_t,
strele TYPE string.
SELECT * FROM s012 INTO TABLE it_s012 UP TO 100 ROWS.
PERFORM data_to_string
TABLES
    strtab
USING
    'S012'. "requires it_s012 and wa_s012
LOOP AT strtab INTO strele.
WRITE: / strele.
ENDLOOP.
*&      Form data_to_string
FORM data_to_string TABLES strtab TYPE strtab_t
                    USING ittab TYPE any.
DATA:
    h_zaehler TYPE i,
    line_str TYPE string,
    l_tabellenname(10) TYPE c,
    l_arbeitsbereichsname(10) TYPE c,
    h_string TYPE string,
    h_char(255) TYPE c.
FIELD-SYMBOLS: <l_tabelle> TYPE ANY TABLE,
                 <l_arbeits> TYPE ANY,
                 <feldzeiger> TYPE ANY.
CLEAR strtab.
CONCATENATE 'IT_' ittab INTO l_tabellenname.
ASSIGN (l_tabellenname) TO <l_tabelle>.
CONCATENATE 'WA_' ittab INTO l_arbeitsbereichsname.
ASSIGN (l_arbeitsbereichsname) TO <l_arbeits>.
LOOP AT <l_tabelle> INTO <l_arbeits>.
    CLEAR: h_zaehler, line_str.
    line_str = ittab.
    DO.
      ADD 1 TO h_zaehler.
      ASSIGN COMPONENT h_zaehler OF
        STRUCTURE <l_arbeits> TO <feldzeiger>.
      IF sy-subrc <> 0. EXIT. ENDIF.
      WRITE <feldzeiger> TO h_char LEFT-JUSTIFIED.          "#EC *
      h_string = h_char.
      CONCATENATE line_str separator h_string INTO line_str.
    ENDDO.
    APPEND line_str TO strtab.
ENDLOOP.
ENDFORM.                    "data_to_string

How to pass table data to brf plus application through abap program

Dear All,
i have a question related to BRF Plus management through abap program.
In brf plus application end, Field1,field2,field3 these 3 are importing parameters.
Table1->structure1->field4,field5 this is the table,with in one structure is there and 2 fields.
in my abap program, i am getting values of fields let us take field1,field2,field3,field4,field5.
And my question is
1) How to pass fields to BRF Plus application from abap program.
2)How to pass Table data to BRF Plus application from abap program.
3)How to pass Structure data to BRF Plus application from abap program.
4)How to get the result data from BRF Plus application to my abap program.
And finally , how to run FDT_TEMPLATE_FUNCTION_PROCESS.
How do i get the code automatically when calling the function in brf plus application.
Regards
venkata.

Hi Prabhu,
Since it is a Custom Fm i cant see it in my system.
Look if u want to bring data in internal table then there could be two ways::
1) your FM should contain itab in CHANGING option , so that u can have internal table of same type and pass through FM,
2) read values one by one and append to internal table.
Thanks
Rohit G

How to pass table data into below code for alv

hi
i want to pass table data into alvgrid
i dont know how to pass table data.
here instead of passing ABC into internal table
i want to pass table data .
please help me
ialv-test1 = 'ABC'.
form get_data.
ialv-test1 = 'ABC'.
ialv-test2 = 'DEF'.
append ialv.
ialv-test1 = 'GHI'.
ialv-test2 = 'JKL'.
append ialv.
ialv-test1 = '123'.
ialv-test2 = '456'.
append ialv.
endform
thanks in advanced.

Have a look at below links. It gives you sample code of alv grid.
http://sap.niraj.tripod.com/id64.html
http://www.sap-img.com/abap/sample-programs-on-alv-grid.htm
Have a look at below links for SAP Help.
http://help.sap.com/saphelp_nw04/helpdata/en/8d/e994374c9cd355e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/12/904f42d5f811d2b469006094192fe3/content.htm
Best Regards,
Vibha
*Please mark all the helpful answers

How to extract Inventory data from SAP R/3 system

Hi friends How to extract Inventory data from SAP R/3 system? What are report we may expect from the Inventory?

Hi,
Inventory management
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
How to Handle Inventory Management Scenarios in BW (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Loading of Cube
ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
Non-Cumulative Values / Stock Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Here you will find all the Inventory Management BI Contents:
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
2LIS_03_BX- Initial Stock/Material stock
2LIS_03_BF - Material movements
2LIS_03_UM - Revaluations/Find the price of the stock
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
These are the standard data sources used for Inventory extraction.
Hope this helps.
Thanks,
JituK

How to extract PS data from sap r/3 to bw

Hi,
How to extract PS data from sap r/3 to bw
PS data like plans,budget,accurals&commitmnets
can any one help me regarding this..
Thanks in Advance,
Shankar.

HI sankar,
you can refer the belkow link to find the details on the relevant extractors and infoproviders
http://help.sap.com/erp2005_ehp_04/helpdata/EN/17/416d030524064cb2b8d58ffb306f3a/frameset.htm
Regards,
Sathya

How to load master data from SAP R/3 system like Customer master...........

How to load master data from SAP R/3 system like Customer master, materioal master , vendor master.............

Hi Bramha,
Check ...........
Re: master data loading in BI 7.0
/message/4708129#4708129 [original link is broken]
Re: Master data loading.
Regards,
Vijay.

Sap script '' how to create table frame in sap script"""

i have some problem in sap script'' how to create table frame in sap script"""

Hi,
you can use BOX command..
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
4. FRAME: Thickness of frame.
Default: 0 (no frame).
5. INTENSITY: Grayscale of box contents as % .
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
check the fallowing link also
http://help.sap.com/saphelp_40b/helpdata/en/d1/803293454211d189710000e8322d00/content.htm
Mark the points if u find it useful...
Regards,
Omkar.

How to transfer table data from one client to another client?

How to transfer table data from one client to another client?

Hi,
Look at the Blog
/people/community.user/blog/2007/01/07/transport-table-entries
Regards
Sudheer

Pass transaction data from an InfoProvider to the BPC within BW

Hi Gurus,
I need to pass transaction data from an InfoProvider to the BPC Real-Time InfoCube, but I need to do from BW, and not from the BPC Excel interface.
The reason is that I want to make the whole process in one step, and at the beginning of the process the end-user has to introduce some parameters in the BW, as we are launching the process chain from a transaction.
Therefor I copied the process chain /CPMB/LOAD_INFOPROVIDER and tried to introduce the different parameters that are normally delivered by the prompt in the excel interface.
Can anybody help? Does anybody know what parameters for each process type have to be introduced, in what form and if all the process types are needed?
Making it with a normal BW transformation is also not an option, as we don't want to change from plan mode and stop people from planning.
It is very important for my end user to do everything in one step, without having to enter the BPC Excel interface.
Thanks in advance.
Cheers,
Àlex

Hi Frank,
I have checked and we have many processes in SM50 available for the job to use. Sometimes there are no other jobs running in the BW System except for the 2 jobs but still the 2nd job waits for the first to finish.
I did another check on transaction code SM58 in BW System. Here it shows all the transactional RFC queues that is being generated by the 2 jobs. I saw that only TRFC queues are able to execute at one time. I am not sure if this is the problem but is it possible to set the number of queues that can be executed at one time to more than 2? If yes, where can I find such a setting?
This is quite urgent as this problem causes all my jobs to end very late.
Thanks.
Shunhui.

How do I move data from my iPad to the cloud?

How do I move data from my iPad to the cloud?

lrc70 wrote:
My old PC finally died
Backup, backup, backup...
Now I am trying to get all 733 songs into my Itunes library and on my macbook
which you will promply backup, backup, backup, yes?
And make and maintain regular backups?
Time Machine is simply to use. Just plug in an external drive.

How do you download data from your macbook to the ipad?

how do you transfer data from your macbook to the ipad?

What data do you want to transfer ? Music, films, tv shows, photos and ibooks are done by syncing in iTunes (for which there is some help in the iPad manual which can be downloaded from here http://support.apple.com/manuals/#ipad). Documents can also be done via iTunes, but it depends upon the app and the transfer method(s) that it supports e.g. file sharing via the bottom of the device's apps tab on your computer's iTunes, via your wifi network, cloud services, email attachments etc
Edit : have you got the Keynote app on your iPad, or any other app that supports keynote presentations ? Without a 'suporting' app you can't store a document/file on the iPad (unlike computers files have to be stored within an app)..
Message was edited by: King_Penguin

How to pass a data from child window to parent window

Hi,
I have a jsp page with two hidden fields and a button, On clicking the button a popup will come out. There are two combobox in the popup and a search button. After putting a value in the comboboxes,if I click the search button, I need the datas of the combobox to pass to the parent's hidden fields then I need to do a data base search with that values of hidden fields and display the result in the parent page.
I could I solve this problem, Please help, Its urgent.
Thanks and Regards
Rajib Sharma

I think that you can use the JavaScipt as follow to pass a data from child window to parent window
<HEAD>
<script>
function passData(){
opener.form1.test1.value=form2.test2.value; //pass the value of test2 to the parent's test1
window.close();
</script>
</HEAD>
<BODY>
<form name=form2>
<input name=test2 type=text>
<input type=button onclick="passData()" value=CLOSE>
</form>
</BODY>

How to copy table data from onde DB to another DB using clipboard

HI,
i copied table data from one DB to another DB, but it displays an error as "policy with check option violation" when inserting the table data.. so how to resolve the proble.. thanks in advance.

DECLARE
log_utl_dir VARCHAR2(100) :=('/apps/home/cmsftp/log/gaa');
CURSOR tb_compy_cur is
select tb.compy_acronym
-- QC 158113 - added below
,tb.ivr_plan_num
from tb_fc_compy tb,tb_xop_entitlements te
where tb.grant_award_accept_flag = 'Y'
and tb.ivr_plan_num = te.ivr_plan_num
and te.entitle_name = 'GAA_RECONCILED'
union all
select compy_acronym
-- QC 158113 - added below
,tb.ivr_plan_num
from tb_fc_compy tb
where tb.res_stock_flag = 'Y'
--and (tb.res_auto_lapse_flag = 2 OR
--tb.res_auto_lapse_flag = 3)
and exists (select entitle_name from tb_xop_entitlements te
where tb.ivr_plan_num = te.ivr_plan_num
and te.entitle_name = 'GAA_RES_FLAG'
and te.optionee = 'Y'
and te.psrep = 'Y'
and te.sponsor = 'Y'
and te.advisor = 'Y');
v_xopgrantz_insertcount NUMBER := 0;
-- QC 158113 - added below
v_xopgrantz_accpt_count NUMBER := 0;
v_user_id VARCHAR2(30);
insert_file_id UTL_FILE.FILE_TYPE;
insert_log_file varchar2(45) := 'xop_grantz_insertstats.log';
BEGIN
DBMS_OUTPUT.PUT_LINE('success1');
insert_file_id := UTL_FILE.fopen(log_utl_dir,insert_log_file,'w');
UTL_FILE.put_line(insert_file_id,'Starting the Process at '|| CURRENT_TIMESTAMP);
UTL_FILE.put_line(insert_file_id,'INSERTING ROWS FOR Companies turned on for GAA_RECONCILE and GAA/RESSTOCK');
for compy_rec in tb_compy_cur loop
v_user_id := 'CMS'||compy_rec.compy_acronym||'_USER';
ctx_set_session.set_user_session(v_user_id);
dbms_output.put_line ('success2'||''|| v_user_id);
INSERT into xop_grantz(grant_num,
user_id,
last_user_id,
restrict_grant,
child_symbol,
parent_grant_flag,
bulking_overide_flag,
exerrestrict_code,
rounding_method,
exercisiable_dt,
def_res_units_flag,
opt_gain_def_elig_flag,
opt_gain_deferred_flag,
opt_gain_deferred_dt,
opts_accepted,
lst_updtby_usercd,
accepted_type,
GAA_eligible,
GAA_LST_UPDTBY)
select g.grant_num,
v_user_id,
'GRNTACCPT',
'N',
'N',
(sel ect code
from tb_xop_exerrestrict_codes
where cash_allowed = 'Y'
and cashlesshold_allowed = 'Y'
and cashlesssell_allowed = 'Y'
and stockswap_allowed = 'Y'
and restricted_allowed = 'Y'
and sar_allowed = 'Y'
and cashmargin_allowed = 'Y'
and cashpartial_allowed = 'Y'
and sarsale_allowed = 'Y'),
NULL,
'N',
'N',
'N',
NULL,
NULL,
NULL,
'N',
NULL,
NULL
from grantz g
where not exists(select 1
from xop_grantz xg
where xg.grant_num = g.grant_num);
v_xopgrantz_insertcount := SQL%ROWCOUNT;
dbms_output.put_line ('1');
-- QC158113 - Optimisation fix--starts
DELETE FROM gt_xop_grant_accpt_type;
INSERT INTO gt_xop_grant_accpt_type
SELECT g.grant_num,e.ivr_plan_num,
pk_xop_grntaccpt.fn_get_accpt_type (v_user_id,
g.plan_num,
g.grant_dt,
g.opt_num,
g.grant_cd,
g.plan_type,
'Y'
FROM grantz g,tb_xop_entitlements e
WHERE plan_type IN (2, 4, 5, 7, 8)
and g.user_id = v_user_id
and e.ivr_plan_num = compy_rec.ivr_plan_num
and entitle_name = 'GAA_RES_FLAG' ;
dbms_output.put_line ('success3');
v_xopgrantz_accpt_count := SQL%ROWCOUNT;
UTL_FILE.put_line(insert_file_id,'Inserted count in gt_xop_grant_acceptance '|| v_user_id||v_xopgrantz_accpt_count);
-- QC158113 - Optimisation fix--ends
COMMIT;
UTL_FILE.put_line(insert_file_id,'Inserted count in XOP_GRANTZ for USER_ID '|| v_user_id||v_xopgrantz_insertcount);
ctx_set_session.set_user_session('');
dbms_output.put_line ('process completed');
end loop;
UTL_FILE.fclose(insert_file_id);
EXCEPTION
when others then
rollback;
dbms_output.put_line ('Code '||SQLCODE||':'||SQLERRM||' at '||v_user_id||' .pr_xopgrantz_insert');
pr_xop_log_errors('Code '||SQLCODE||':'||SQLERRM||' at '||v_user_id||' .pr_xopgrantz_insert');
pr_xop_log_errors('Code '||SQLCODE||':'||SQLERRM||'INSERTING into xop_grantz for ALL grants');
END;
i received this error when running the procedure also, so the table gt_xop_grant_accpt_type is not populated
{Code -28115:ORA-28115: policy with check option violation at CMSFB_USER .pr_xopgrantz_insert}

How to pass tables data from SAP script to the routine.

Similar Messages

Maybe you are looking for