How to pass the result of one script to another?

Hi
Is there any possibility to pass info from one script to another? I run some scripts at night and they have to use the results I get during the day...
Thank you in advance for any help
Vera

There's a couple of ways of doing this.
It sounds like the second script isn't being called directly from the first one, so you can't pass the data directly, so that leaves you with a couple of options.
One is to have the first script write the data to a file, then have the second script read that file.
The other would be to store the data as a property in the first script - properties are saved between executions - then have the second script read the first script's property when it starts up.
For the first option, just have the script write the data to a file:
set myData to "here's the data to save"
set myFile to (open for access file (path to home folder as text & "data.file") with write permission
write myData to myFile starting at 0
close access myFile
Now the second script can read the file:
set otherScriptsData to read file (path to home folder as text & "data.file")
For the second option, just store the data as a property:
property myData:""
set myData to "here's the data to save"
Now loading the data in the second script goes like:
set otherScript to load script file "path:to:other.scpt"
set otherScriptsData to otherScript's myData
Here you can see the second script loading the script then reading its myData property.

Similar Messages

How to pass the values from one screen to another

HI,
consider me21n,
po is created with the item category L,so components tab is enabled.that u all know.
i have added the custom tab in the item details with netwt,gross wt,no of pieces and one more field.
those fields are also in component structure of material data.
i need to pass the matnr,maktx,quantity,ntwt,grosswt from the component to be displayed in the subscreen.
i used import mdpm to xmdpm from memory id 'subcon', where it is exported from the function module 'me_components-maintain'.
how to pass all the values from component of structure MDPM to the subscreen of custom tab in the item details.
help me pls........................'

hi everyone,
MODULE status_0111 OUTPUT.
data : fill type i.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.,
DESCRIBE TABLE lt_zzmm_po_comp LINES fill.
ctrl_0111-lines = fill.
ENDMODULE.                 " STATUS_0111 OUTPUT
MODULE fetch_data OUTPUT.
ctrl_0111-lines = 2.
import xmdpm to lt_xmdpm from memory id 'SUBCON'.
IF not sy-subrc eq 0.
    CLEAR lt_zzmm_po_comp[].
    LOOP AT lt_xmdpm.
      MOVE-CORRESPONDING lt_xmdpm TO lt_zzmm_po_comp.
      APPEND lt_zzmm_po_comp.
    ENDLOOP.
MOVE-CORRESPONDING lt_zzmm_po_comp TO ctrl_0111.
read table ctrl_0111-cols into col where index = 3.
ENDIF.
ENDMODULE.                 " FETCH_DATA OUTPUT
MODULE pass_line OUTPUT.
READ TABLE lt_zzmm_po_comp INDEX ctrl_0111-current_line.
MOVE-CORRESPONDING lt_zzmm_po_comp TO ctrl_0111.
ENDMODULE.                 " PASS_LINE OUTPUT
flow logic
PROCESS BEFORE OUTPUT.
MODULE status_0111.
MODULE FETCH_DATA.
loop at lt_zzmm_po_comp WITH CONTROL ctrl_0111 cursor
ctrl_0111-current_line.
   module pass_line.
endloop.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0111.
loop.
*module read_data.
endloop.
but i cant see my fields in the table control .....i dont know y it is not coming?can anyone help me with code...

How to pass the value from one level to another level

Example :
we have secnario for leave process
initiall the user enters the name in first action the personal number should pick from first action to background RFC CO to pick the Payroll admin from R/3
i designed the first data input form.... i want to pick the personal number and pass that one to next action in background mode.
thanks in advance
sukumar

Hi,
If you want to execute the step in background then you can use the callable object of type "Background Execution" or if you want to do any user interaction on that step then you can go for web dynpro callable object. Here is the link for Background Execution callable object.
http://help.sap.com/saphelp_nw70/helpdata/en/9a/e8934258a5ca6ae10000000a155106/frameset.htm
Here is also link for Web Dynpro Callable Object
http://help.sap.com/saphelp_nw70/helpdata/en/de/8976417f2d5558e10000000a1550b0/frameset.htm
If you have any conficution please let me know.
Thanks
Chandan

How to pass the value from one page to another page

Dear Gaurav
I have three pages
1-creation page
2-search page
3-creation page
in first creation page I have column name user write a% and submit to that search for that name.
it is going to second page (search page)name a% is passed and search that corresponding value,the corresponding values are not there user will call third creation page and enter the details and save and click back to first page the value is not calling passing from third page to first page I submit the button in 3rd page the error is coming like this.
The requested page contains stale data. This error could have been caused through the use of the browser's navigation buttons (the browser Back button, for example). If the browser's navigation buttons were not used, this error could have been caused by coding mistakes in application code. Please check Supporting the Browser Back Button developer guide - View Object Primary Key Comparison section to review the primary causes of this error and correct the coding mistakes.
Cause:
The view object xxcrmleadmgmtAM.xxcrmleadmgmtVO contained no record. The displayed records may have been deleted, or the current record for the view object may not have been properly initialized.
in first page column name I removed view instance and view attribute the value is passing from third page to first page
my requirement is the value call from 3 to 1 and user will enter remaining fields in 1st page and save the records.
Regards
Mahesh

Hi Mahesh,
Use
OA.jsp?page=/oracle/apps/................&retainAM=Y).
Thanks
Jegan

How can I pass the photos from one iphone to another?

how can I pass the photos from one iphone to another?

Use the Beaming feature. See the info at the ? In iPhoto for iOS.

Passing the values from one pgm to another pgm (Calling pgm has no sel scr)

Hi gurus,
In my requirement i need to pass the values from one program to another program.
I am using SUBMIT statement . But , the program which i am calling has no selection screen.
So how can i pass the values?
Please help me ASAP.
Regards,
Bhanu.R

Export your internal tables or work areas to a memory id in ur program before u use submit.
Then in second pgm you have to import from memory id given above.
example.
EXPORT gs_header FROM gs_header to memory id 'HEADER'.
EXPORT gt_item FROM gt_item to memory id 'ITEM'.
SUBMIT YFIIN_DISHC_MAILREPORT EXPORTING LIST TO MEMORY AND RETURN.
In your second pgm you can write
import gs_header TO gs_header from MEMORY id 'HEADER'.
import gt_item TO gt_item from MEMORY id 'ITEM'.

How to transfer the logins from one instance to another instance in sql2008r2

how to transfer the logins from one instance to another instance in sql2008r2

Hi Ganesh,
According to your description, you want to know how to transfer the logins from one instance to another instance for SQL Server 2008 R2. To do this, besides dave’s post, you could also use
'Copy Database Wizard' in SQL Server Management Studio, or the component
'transfer Login task' in SQL Server Integration Services.
Regards,
Michelle Li

How to mirror the screen from one ipad2 to another ipad2?

How to mirror the screen from one ipad2 to another ipad2?
When writing in f.ex. Pages on one iPad i wish to see it in realtime on the other ipad.
How is that done???

That functionality is not built into the iPad, so you'd need a third-party app of some sort. I'm not aware of any app that allows mirroring from one iPad to another iPad, but perhaps someone else will know of something I've missed.
Regards.

ADF : How to pass a variable from one frame to another frame ?

Hi,
I have an html page divided into 3 frames, all inside a frameset. Each frame are linked to a specific .jsf page (src attribute). When I list a list thanks to a ADF datatable in ONE frame, each row has a "show more" button. When I click this button I succeeded to print row detail inside the same frame thanks to the processScope ADF's native variable. The problem is that I want to display the row detail in another frame, clicking from this current frame. So for this I need to reload the other frame which display the content of the processScope variable.
For this I use the javascript code :
=> parent.frames['bottomRight'].location.reload()
Just before refreshing, I put the variable in the processScope of course like it appears in the backing bean :
FacesContext context = FacesContext.getCurrentInstance();
          CLPRMBuilding building = (CLPRMBuilding)
     context.getApplication().getVariableResolver().resolveVariable(context, "building");
     if (building == null)
     return "error";
     AdfFacesContext afContext = AdfFacesContext.getCurrentInstance();
     afContext.getProcessScope().put("buildingDetail", building);
Next, when the user click on the button "show more" a binding CoreCommandButton component is done. And the accessor's code is executed :
public void setShowMoreCommandButton(CoreCommandButton showMoreCommandButton) {
          this.showMoreCommandButton = showMoreCommandButton;
          showMoreCommandButton.setOnclick("parent.frames['bottomRight'].location.reload()");
And so the other frame is reloaded ! But the "buildingDetail" variable seems not to be present in the processScope because in the jsf page displayed by the other frame no content is printed, like if the variable were not initialized. How to do then ? How to pass the buildingDetail variable to the other frame which I need to reload to refresh it's content ?

elaine_g wrote:
I am wondering why does (r.a) give an error outside the method? What's the reason it only works when used inside the (b/r.a) maths function? This is illegal syntax:
class B {
int b;
A r = new A();
r.a; //syntax error
}Why? Class definition restricts what you can define within a class to a few things:
class X {
    Y y = new Y(); //defining a field -- okay
    public X() { //defining a constructor -- okay
    void f() { //defining a method -- okay
}... and a few other things, but you can't just write "r.a" there. It also makes no sense -- that expression by itself just accesses a field and does nothing with it -- why bother?
This is also illegal syntax:
int doB() {
      A r = new A();
      r.a; // error: not a statement
}Again, all "r.a" does on its own is access a field and do nothing with it -- a "noop". Since it has no effect, writing this indicates confusion on the part of the coder, so it classified as a syntax error. There is no reason to write that.

Passing parameter value from one script to another in job chain steps

Hi all,
We have a scenario where in we have a job chain with two steps
1-Step 1 contains a script which fetches value from database to the script parameter(in/out) - PAR_DB_VALUE
2-Step 2 contains another script which uses the value of the parameter PAR_DB_VALUE and has to assign to another parameter in the script 2 called PAR_FETCHED_VALUE(in)
How to pass the value of PAR_DB_VALUE to PAR_FETCHED_VALUE which are parameters in two different steps
Please help
Thanks and Regards
Raj

Hi,
You can achieve this as follows (CPS version 6 & 7):
- Edit the chain
- Go to the second step, to the parameters of the script call in that step
- Go to the parameter (PAR_FETCHED_VALUE) that you want to be filled by the parameter of the first step
- choose "Chain value" in the detail screen for the parameter, and select the desired out parameter from the drop down
Note that both parameters need to be of the same type for this to work.
Regards,
Anton.

How to Transfer the iPhone from one computer to another Win XP

All
I got my wife a new macbook pro, running Windows XP prof. She has an iphone 3G with 16 GB memory running 3.0.1. So..she wanted to transfer the sync function from her PC to her macbook. Of course, Apple was of NO help at all (but did want to charge us $69.95 since her iphone is out of warranty, and this was an iphone not a mac problem, hmmm..). Took me lots of digging, but here is how you transfer you iphone from one computer to another:
1. Move you itunes library from the old computer to the new one. To do this, you do NOT just copy it. This is as good a link to use as any to see how to do it, but search the internet and you can find instructions:
http://reviews.cnet.com/8301-12519_7-10242259-49.html
2. Transfer your applications you have purchased to the new computer. To do this, open itunes in the new computer, hook up your phone and click on File>transfer purchases (from itunes store) to computer. This will move your applications to the new computer.
3. Export your MS outlook calendar, contacts, notes, etc. to the new computer by saving each of these categories as a PST file (file>export>then choose the category and type of file)...and then copy these PST files to your new computer and import them into MS outlook.
4. Copy your playlists from itunes on your old computer to your new computer. This link may be helpful or search the internet again if you need to:
http://osx.tribe.net/thread/08fd0e5e-f1d0-450b-8de5-9f7cb5bd278d
5. Now...the important part...how to transfer all your settings from the iphone to the new computer....this is the part that was hard to find online, but finally got it: NOTE: THE BACKUP THAT ITUNES MAKES BACKS UP THE APPLICATION SETTINGS BUT NOT THE APPS SO THIS IS WHY YOU NEED TO TRANSFER THE APPS TO THE NEW COMPUTER. The settings have all the data you put into your apps, email settings, preferences, etc...so its a huge time save to transfer these to the new computer also.
-Sync your iphone with your old computer to have a backup in case you mess up...in that case you can restore from your old computer and start over
-Plug your iphone into the new ocmputer and start itunes. It will detect your phone (I assume you have already authorized your new computer to use the library and playlists and apps that you moved)
-Right click on the "iphone" on the left bar...you will see a popup menu...click on "BACKUP". Let it backup your iphone to the new computer. It will NOT sync the phone
-When the backup is done....copy the backup file to a temp directory to be safe. The backup is located in "documents and settings">user name>applications>apple computer>mobile sync. If you cannot see it, you need to open windows explorer (not internet explorer) and go to tools>folder options>view and click on "show hidden files and folders" Note YOU CANNOT JUST COPY THE BACKUP FROM THE OLD COMPUTER TO THE NEW COMPUTER AS SUGGESTED ON SOME WEB SITES...THIS DOES NOT WORK, ITUNES WILL NOT IDENTIFY THE BACKUP EVEN IF YOU PUT IT IN THE FOLDER IN THE NEW COMPUTER THAT MIRRORS THE FOLDER LOCATION IN THE OLD COMPUTER.
-OK now you are ready...click restore on the iphone and restore the phone to factory settings. This will happen in a few minutes (10-15 mins).
-The phone will reboot and itunes will recognize the phone again...as a restored phone. It will then ask you if you want to restore it from the backup..say YES. You then need to go through all the itunes tabs and click on everything you want to sync to the phone (playlists, movies, podcasts, ringtones, etc). Once you are done going thru the tabs click "apply" and the sync will start. Go out, to a movie, to bed, whatever because it will take hours to sync.
-Once the sync is done...voila...your iphone has been moved with ALL the settings to the new computer. Check it. Then you can delete the backup you put into the temp folder if it is OK
-Deauthorize your old computer
This worked for Win XP...should work for Vista. The whole process took many hours so don't rush through it (i'm guessing 12 hours total work).
Can I send apple a bill for tech support?????

All
I got my wife a new macbook pro, running Windows XP prof. She has an iphone 3G with 16 GB memory running 3.0.1. So..she wanted to transfer the sync function from her PC to her macbook. Of course, Apple was of NO help at all (but did want to charge us $69.95 since her iphone is out of warranty, and this was an iphone not a mac problem, hmmm..). Took me lots of digging, but here is how you transfer you iphone from one computer to another:
1. Move you itunes library from the old computer to the new one. To do this, you do NOT just copy it. This is as good a link to use as any to see how to do it, but search the internet and you can find instructions:
http://reviews.cnet.com/8301-12519_7-10242259-49.html
2. Transfer your applications you have purchased to the new computer. To do this, open itunes in the new computer, hook up your phone and click on File>transfer purchases (from itunes store) to computer. This will move your applications to the new computer.
3. Export your MS outlook calendar, contacts, notes, etc. to the new computer by saving each of these categories as a PST file (file>export>then choose the category and type of file)...and then copy these PST files to your new computer and import them into MS outlook.
4. Copy your playlists from itunes on your old computer to your new computer. This link may be helpful or search the internet again if you need to:
http://osx.tribe.net/thread/08fd0e5e-f1d0-450b-8de5-9f7cb5bd278d
5. Now...the important part...how to transfer all your settings from the iphone to the new computer....this is the part that was hard to find online, but finally got it: NOTE: THE BACKUP THAT ITUNES MAKES BACKS UP THE APPLICATION SETTINGS BUT NOT THE APPS SO THIS IS WHY YOU NEED TO TRANSFER THE APPS TO THE NEW COMPUTER. The settings have all the data you put into your apps, email settings, preferences, etc...so its a huge time save to transfer these to the new computer also.
-Sync your iphone with your old computer to have a backup in case you mess up...in that case you can restore from your old computer and start over
-Plug your iphone into the new ocmputer and start itunes. It will detect your phone (I assume you have already authorized your new computer to use the library and playlists and apps that you moved)
-Right click on the "iphone" on the left bar...you will see a popup menu...click on "BACKUP". Let it backup your iphone to the new computer. It will NOT sync the phone
-When the backup is done....copy the backup file to a temp directory to be safe. The backup is located in "documents and settings">user name>applications>apple computer>mobile sync. If you cannot see it, you need to open windows explorer (not internet explorer) and go to tools>folder options>view and click on "show hidden files and folders" Note YOU CANNOT JUST COPY THE BACKUP FROM THE OLD COMPUTER TO THE NEW COMPUTER AS SUGGESTED ON SOME WEB SITES...THIS DOES NOT WORK, ITUNES WILL NOT IDENTIFY THE BACKUP EVEN IF YOU PUT IT IN THE FOLDER IN THE NEW COMPUTER THAT MIRRORS THE FOLDER LOCATION IN THE OLD COMPUTER.
-OK now you are ready...click restore on the iphone and restore the phone to factory settings. This will happen in a few minutes (10-15 mins).
-The phone will reboot and itunes will recognize the phone again...as a restored phone. It will then ask you if you want to restore it from the backup..say YES. You then need to go through all the itunes tabs and click on everything you want to sync to the phone (playlists, movies, podcasts, ringtones, etc). Once you are done going thru the tabs click "apply" and the sync will start. Go out, to a movie, to bed, whatever because it will take hours to sync.
-Once the sync is done...voila...your iphone has been moved with ALL the settings to the new computer. Check it. Then you can delete the backup you put into the temp folder if it is OK
-Deauthorize your old computer
This worked for Win XP...should work for Vista. The whole process took many hours so don't rush through it (i'm guessing 12 hours total work).
Can I send apple a bill for tech support?????

How to pass a variable from one class to another class?

Hi,
Is it possible to pass a variable from one class to another? For e.g., I need the value of int a for calculation purpose in method doB() but I get an error <identifier> expected. What does the error mean? I know, it's a very, very simple question but once I learn this, I promise to remember it forever. Thank you.
class A {
int a;
int doA() {
      a = a + 1;
      return a;
class B {
int b;
A r = new A();
r.a; // error: <identifier> expected. What does that mean ?
int doB() {
     int c = b/a; // error: operator / cannot be applied to a
}Thank you!

elaine_g wrote:
I am wondering why does (r.a) give an error outside the method? What's the reason it only works when used inside the (b/r.a) maths function? This is illegal syntax:
class B {
int b;
A r = new A();
r.a; //syntax error
}Why? Class definition restricts what you can define within a class to a few things:
class X {
    Y y = new Y(); //defining a field -- okay
    public X() { //defining a constructor -- okay
    void f() { //defining a method -- okay
}... and a few other things, but you can't just write "r.a" there. It also makes no sense -- that expression by itself just accesses a field and does nothing with it -- why bother?
This is also illegal syntax:
int doB() {
      A r = new A();
      r.a; // error: not a statement
}Again, all "r.a" does on its own is access a field and do nothing with it -- a "noop". Since it has no effect, writing this indicates confusion on the part of the coder, so it classified as a syntax error. There is no reason to write that.

How to Copy the PLD from one database to another

Dear Members,
i have designed the PLD for Purchase Order, i want to copy the particular PLD into another Database.
i tried to copy the PLD from one database to another through copy express.. i copied the PLD sucessfully. But the problem is,it copies all PLD's from one database to another. i want only the Purchaseorder PLD has to be copied in to another database.any body can help me in this regard.
With Regards,
G.shankar Ganesh

Hi,
select * into A1 from RDOC where Author !='System'
select * into A2 from RITM where Doccode in (select Doccode from A1 )
select * from A1
select * from A2
sp_generate_inserts 'A1'
sp_generate_inserts 'A2'
you will get Insert scripts of A1 and A2 tables .After that You 'll Replace A1 to RDOC and A2 to RITM.
So that you can RUN this SQL srcipts any where (In any Database)
but First u have to run sp_generate_inserts Storeprocedure(from websites) .
drop table A1,A2

How to copy the data from one database to another database without DB link

Good Day,
I want to copy the data from one database to another database with out DB link but the structure is same in both.
Thanks
Nihar

You could use SQL*Plus' COPY command
http://technology.amis.nl/blog/432/little-gold-nugget-sqlplus-copy-command
http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/apb.htm#sthref3702
Edited by: Alex Nuijten on Sep 16, 2009 8:13 AM

How to get the results in one line

Hi
if i use the script below i get the name of path and then : and in next line i get the results.is there a way to get the results from every path after the : and not in the next line?
another question - is there a way that the script will not show the server name on every path?
(Get-Counter -ListSet LogicalDisk).PathsWithInstances | Get-Counter
THC

If you take you script and pipe it to get member, it will give you a list of various script properties.
(Get-Counter -ListSet LogicalDisk).PathsWithInstances | Get-Counter | get-member
You will see that the object type returned by "Get-Counter" is Microsoft.PowerShell.Commands.GetCounter.PerformanceCounterSampleSet.
TypeName:
Microsoft.PowerShell.Commands.GetCounter.PerformanceCounterSampleSet
Name MemberType Definition
Equals Method bool Equals(System.Object obj)
GetHashCode Method int GetHashCode()
GetType Method type GetType()
ToString Method string ToString()
CounterSamples Property Microsoft.PowerShell.Commands.GetCounter.Perfo...
Timestamp Property datetime Timestamp {get;set;}
Readings ScriptProperty System.Object Readings {get=$strPaths = ""...
You can try grabbing different properties, and they will print out differently, displaying the data on the same line in some cases. For example, pipe your output to a "foreach-object" block, and then for each object print out the CounterSamples property.
(Get-Counter -ListSet LogicalDisk).PathsWithInstances | Get-Counter | foreach-object { ($_).CounterSamples }
This should all print on one line now. However, you also asked if there was a way to not have the server print out on every line. The way to control the format of these outputs is to use the "format-table" cmdlet. So you would pipe your output to format-table
and then give it various options. This is how you would pipe it (without any options).
(Get-Counter -ListSet LogicalDisk).PathsWithInstances |
Get-Counter | object { ($_).CounterSamples | format-table }#OR USE YOUR ORIGINAL CODE(Get-Counter -ListSet LogicalDisk).PathsWithInstances |
Get-Counter | format-table }
Now, it's up to you to give format-table the options you want. With no options, output will look unchanged. To see what options are available to you, use get-help.
get-help format-table
I hope this helps!
Thank for all the info...

How to pass the result of one script to another?

Similar Messages

Maybe you are looking for