How to pass values in dynamic fields in LX03

HI ,
i want to pass values for dyanmic fields in lx03 program by calling this in my own program through call transction or submit report .

LX03 is the report program so you have to use Submit report.
See the simple example :
REPORT ZTEST_98 .
DATA: t_param LIKE rsparams OCCURS 10 WITH HEADER LINE.
parameters p_LGNUM like lagp-lgnum obligatory.
start-of-selection.
      t_param-selname = 'S1_LGNUM'.
      t_param-kind = 'P'.
      t_param-low = p_lgnum.
      APPEND t_param.
*-- Period
SUBMIT RLS10030 VIA SELECTION-SCREEN
                          WITH SELECTION-TABLE t_param
                          AND RETURN.
Just press F1 on submit and you get good documentation.
Thanks
Seshu

Similar Messages

Regarding how to pass values to the fields of a screen.

Hi all :
     there is a field called approver on screen. I'd like to pass value to it ,
     may I use the statement like      approver-text = 'xxx'. ?
     is this ok?
     Thanks for any of your reply.

Hi,
Parameters: p_name type char20 default 'XXX'.
you can give like this.
or
parameters: p_name type char20.
Initialization.
p_name = 'XXX'.
both these will work
regards
Sarves

How to pass values in dynamic structure and then dynamic table

Hi,
we have a Z structure in se11 holding 10 fields. But at run time i need to create a dynamic table with more than 10 records.
I am able to create the structure and corresponding internal table. Now the issue is i have to populate this dynamic structure with some values and then append it to dynamic internal table. Since the dynamic table type is any its not allowing an index operation like modify etc etc.
Could anyone help me in passing the values . I have searched in SDN . everyone created a dynamic table and then populated it values from some standard or custom tables.Then assigning the component of structure and displaying the output. but in my situation i have no such values stored in any tables. i populate values based on certain calculation.

Hi Friends,
This is the piece of code.After creating dynamic work area and dynamic table what i should do?
TYPES: BEGIN OF STR,
ID TYPE I,
NAME(30) TYPE C,
END OF STR.
data: v_lines type i.
STR_TYPE ?= CL_ABAP_TYPEDESCR=>DESCRIBE_BY_NAME( 'STR' ).
STR_COMP = STR_TYPE->GET_COMPONENTS( ).
APPEND LINES OF STR_COMP TO COMP_TAB.
COMP-NAME = 'NAME1'.
COMP-TYPE = CL_ABAP_ELEMDESCR=>GET_STRING( ).
APPEND COMP TO COMP_TAB.
COMP-NAME = 'VALUE1'.
COMP-TYPE = CL_ABAP_ELEMDESCR=>GET_STRING( ).
APPEND COMP TO COMP_TAB.
COMP-NAME = 'NAME2'.
COMP-TYPE = CL_ABAP_ELEMDESCR=>GET_STRING( ).
APPEND COMP TO COMP_TAB.
COMP-NAME = 'VALUE2'.
COMP-TYPE = CL_ABAP_ELEMDESCR=>GET_STRING( ).
APPEND COMP TO COMP_TAB.
COMP-NAME = 'NAME3'.
COMP-TYPE = CL_ABAP_ELEMDESCR=>GET_STRING( ).
APPEND COMP TO COMP_TAB.
COMP-NAME = 'VALUE3'.
COMP-TYPE = CL_ABAP_ELEMDESCR=>GET_STRING( ).
APPEND COMP TO COMP_TAB.
NEW_STR = CL_ABAP_STRUCTDESCR=>CREATE( COMP_TAB ).
NEW_TAB = CL_ABAP_TABLEDESCR=>CREATE(
P_LINE_TYPE = NEW_STR
P_TABLE_KIND = CL_ABAP_TABLEDESCR=>TABLEKIND_STD
P_UNIQUE = ABAP_FALSE ).
CREATE DATA DREF TYPE HANDLE NEW_TAB.
CREATE DATA DREF1 TYPE HANDLE NEW_str.

Pass value to a field dynamically..

Hi Experts,
Can any one solve this issue?.
I want to pass value to different fields dynamically..
Egu2026
I have work are having fields
lwa_table-var1,
lwa_table-var2,
lwa_table-var3,
lwa_table-var4,
u2026.. up to lwa_table-var100.
My logic is I have to pass l_tot value .. based on the last letter like below.
if l_tot value is 1 we have pass to lwa_table-var1
if l_tot value is 2 we have pass to lwa_table-var2
if l_tot value is 3 we have pass to lwa_table-var3
if l_tot value is 100 we have pass to lwa_table-var100.
<removed_by_moderator>
Thanks in advance.
Regards,
Kumar.
Edited by: Julius Bussche on Aug 12, 2009 8:41 AM

Hi Friend,
U can do Following.....
data: text(12) type c.
data : num type n.
data: int type i.
data: begin of wa_test,
      var1,
      var2,
      var3,
      var4,
      end of wa_test.
FIELD-SYMBOLS <fs_wa> TYPE ANY.
do 4 times.
int = int + 1.
num = int.
CONCATENATE 'wa_test-' 'var' num into text.
ASSIGN (text) to <fs_wa>.
<fs_wa> = num.
UNASSIGN <fs_wa>.
enddo.
write : wa_test-var1 , wa_test-var2 , wa_test-var3 ,wa_test-var4 .
ouput will be :     1 2 3 4.
Lets take Your Scenario----
>>>>>>>>>>>>>>>>>
Data: begin of lwa_table,
Var1,
Var2,
Var3,
u2026..
u2026u2026
Var100,
End of lwa_table.
Data: l_tot type i.
u2022     For example l_tot = 36.
u2022     Then u want to pass the same to lwa_table36.
For this do followingu2026..
Now Define-->>>
data: text(13) type c.
data : num type n.
FIELD-SYMBOLS <fs_wa> TYPE ANY.
*Now till now we done all the data definitions now u have to do following to pass it dynamically,
l_tot = 36.
Num = l_tot.
CONCATENATE lwa_table-' 'var' num into text.
ASSIGN (text) to <fs_wa>.
<fs_wa> = num.
UNASSIGN <fs_wa>.
Write : lwa_table-var36.
Output will be 36.
Hope this resolves ur issue,
Regards,
Akash Rana
Edited by: AKASH RANA on Aug 12, 2009 8:53 AM

Passing values to Dynamic where clause as IN parameter - ADF

Hi,
I am trying to get the Dynamic where clause query output something like below,
select * from EMP where emp_id IN(200,203,204)
How to pass values from setWhereCluase(emp_id,????)
Thanks,

I'd go about this a little differently (probably not the best way):
1. Create view object lk_department (lookup). In the query add a union with something like "select null as ID, 'All' as name' from dual;". This adds a null value that they can select by leaving the combo box on "All". Add a 'order by id" so the null value is the first one. When creating the combo box you want it set to navigation mode, so select the whole viewobject from the data palette rather a specific field.
2. Create a jTextField for the "Jobs" field.
3. Create an application module method that does something like:
public void filterEmployees(String job){
ViewObject vo_departments = findViewObject("lk_departments");
ViewObject vo_employees = findViewObject("employees");
String wc = "1 = 1 ";
String wc = " and job like '%"+job+"%'"
if (vo_departments.getCurrentRow().getAttribute("Id") != null) {wc += "and department_id = "+vo_departments.getCurrentRow().getAttribute("Id");}
vo_employees.setWhereClause(wc);
vo_employees.executeQuery();
this.sync;
4. In your Jclient app, you just need to call the method of your appmodule and insert the string from the textbox, using code similar to this:
AppModule b = (AppModule)panelBinding.getApplicationModule();
b.filterEmployees(jTextField.getText());
I didn't test this code, but that's how I go about the same thing.

BADI /SAPAPO/AM_ALERTLIST - How to fill values in new field catalogue

Hi,
I need some help for passing values into the field Catalog of an ALERT Monitor.
The requirement is to add new fields in the ALERT Monitor and then populate them with values form the PRODUCT view.
I have implemented method MODIFY_ALERTLIST of BADI /SAPAPO/AM_ALERTLIST. I am able to add the new columns but I am unable to add the values. Actually while debugging i found that even though the NEW values are going into the table T_ALERTS, but the space between the New Added values and the original value is HUGE. Therefore when the Field Catalog is displayed in the Alert Monitor, the NEW Values are not shown.
I am attaching my Code
DATA: l_table_ref TYPE REF TO data,
l_table_ref_1 TYPE REF TO data,
l_fieldcat_str TYPE /sapapo/am_aot_fieldcat_str,
ls_fieldcat TYPE LINE OF lvc_t_fcat,
ls_t_fieldcat LIKE LINE OF t_fieldcat,
l_alert_str TYPE LINE OF /sapapo/alert_tab,
l_str_ref TYPE REF TO data,
l_str_ref_1 TYPE REF TO data.
FIELD-SYMBOLS: <aot_tab> TYPE STANDARD TABLE,
<aot_tab_1> TYPE STANDARD TABLE,
<alert_str> TYPE /sapapo/alert_str,
<aot_str> TYPE ANY,
<alert_str1> TYPE c,
<alert_str_uc> TYPE c.
FIELD-SYMBOLS: <zat103> TYPE c. "ANY.
DATA : l_col_pos TYPE i,
gv_entries TYPE i,
xlength TYPE i.
FIELD-SYMBOLS : <info> TYPE ANY,
                  <aot_str1> TYPE ANY.
DATA olen1 TYPE i.
DATA: t_pegid TYPE STANDARD TABLE OF /sapapo/amopegid_tab,
        t_ordid TYPE STANDARD TABLE OF /sapapo/amoordid_tab.
CLEAR: l_alert_str,
    l_table_ref ,
    l_table_ref_1 ,
    l_fieldcat_str ,
    ls_fieldcat ,
    ls_t_fieldcat ,
    l_str_ref .
*Add new column
READ TABLE t_fieldcat INTO ls_t_fieldcat INDEX 1.
DATA: x1 TYPE lvc_t_fcat,
       y1 LIKE LINE OF x1.
x1 = ls_t_fieldcat-fieldcat.
LOOP AT x1 INTO y1 WHERE reptext NE space.
    CHECK y1-fieldname NE 'DELIVERY_DATE'.
    xlength = xlength + y1-intlen.
ENDLOOP.
DESCRIBE TABLE x1 LINES gv_entries.
Appending Delivery Date
ls_fieldcat-col_pos = gv_entries + 1.
ls_fieldcat-fieldname = 'DELIVERY_DATE'.
ls_fieldcat-ifieldname = 'DELIVERY_DATE'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Delivery Date'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = '/SAPAPO/DELIVERY_DATE' . "'DATS'.
ls_fieldcat-domname = '/SAPAPO/CHAR20'."'/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Delivery Date'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending Start Date
ls_fieldcat-col_pos = gv_entries + 2.
ls_fieldcat-fieldname = 'STARTDAT'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Start Date'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Start Date'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending Required Shelf Life Date
ls_fieldcat-col_pos = gv_entries + 3.
ls_fieldcat-fieldname = 'SL_MIN_DAT'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Req.SL dte'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Req.SL dte'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending Shelf Life Date/Required Maximum Shelf life Date
ls_fieldcat-col_pos = gv_entries + 4.
ls_fieldcat-fieldname = 'SL_MAX_DAT'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'SL Date 2'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'SL Date 2'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending (Availability/Requirements) Date of a Schedule Line
ls_fieldcat-col_pos = gv_entries + 5.
ls_fieldcat-fieldname = 'AVL_REQ_DATE'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Schedule Date'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Schedule Date'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending Req Date/ Shipment end date
ls_fieldcat-col_pos = gv_entries + 6.
ls_fieldcat-fieldname = 'SHIP_MAX_DATE'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Req Date/ Shipment end date'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Req Date/ Shipment end date'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending Expected Grading Date
ls_fieldcat-col_pos = gv_entries + 7.
ls_fieldcat-fieldname = 'GRAD_DATE'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Expected Grading Date'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Expected Grading Date'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending Available Date
ls_fieldcat-col_pos = gv_entries + 8.
ls_fieldcat-fieldname = 'AVAIL_DATE'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Available Date'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Available Date'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
MODIFY TABLE t_fieldcat FROM ls_t_fieldcat.
DATA lvc_t_fcat TYPE lvc_t_fcat.
*CODE FOR ADDING THE NEW VALUES*
ASSIGN Alert Structure to Field Symbols for Unicode
ASSIGN COMPONENT 0 OF STRUCTURE l_alert_str
                     TO            <alert_str>           CASTING.
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = ls_t_fieldcat-fieldcat
    IMPORTING
      ep_table        = l_table_ref.
*assign dynamic structure
ASSIGN l_table_ref->* TO <aot_tab>.
CREATE DATA l_str_ref LIKE LINE OF <aot_tab>.
ASSIGN l_str_ref->* TO <aot_str>.
ASSIGN l_str_ref->* TO <alert_str_uc> CASTING.
LOOP AT t_alerts INTO l_alert_str.
   READ TABLE t_fieldcat WITH KEY aot = l_alert_str-aot
   INTO l_fieldcat_str.
   CALL FUNCTION '/SAPAPO/ATAB_FIELDCAT_GET'
     EXPORTING
       aot        = l_fieldcat_str-aot
       mview      = l_fieldcat_str-mview
     IMPORTING
       table_ref = l_table_ref
       t_fieldcat = lvc_t_fcat.
    ASSIGN l_alert_str TO <alert_str>.
*copy alert to aot-specific structure
    MOVE <alert_str>-info TO <alert_str_uc>.
*Write this code inside the loop
    ASSIGN COMPONENT 'DELIVERY_DATE' OF STRUCTURE <aot_str> TO <zat103>. "CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'STARTDAT' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'SL_MIN_DAT' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'SL_MAX_DAT' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'AVL_REQ_DATE' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'SHIP_MAX_DATE' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'GRAD_DATE' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'AVAIL_DATE' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    MOVE <alert_str_uc> TO <alert_str>-info.
    MODIFY t_alerts FROM l_alert_str INDEX sy-tabix.
    CLEAR : <alert_str>, <alert_str_uc>.
ENDLOOP.
I have even tried Concatenating Values, with that method even though the NEW Values are available but they do not fall under the correct Column.
PLEASE help me out cos I am really Stuck.
Regards
Abhishek Sahi

Hi,
I need some help for passing values into the field Catalog of an ALERT Monitor.
The requirement is to add new fields in the ALERT Monitor and then populate them with values form the PRODUCT view.
I have implemented method MODIFY_ALERTLIST of BADI /SAPAPO/AM_ALERTLIST. I am able to add the new columns but I am unable to add the values. Actually while debugging i found that even though the NEW values are going into the table T_ALERTS, but the space between the New Added values and the original value is HUGE. Therefore when the Field Catalog is displayed in the Alert Monitor, the NEW Values are not shown.
I am attaching my Code
DATA: l_table_ref TYPE REF TO data,
l_table_ref_1 TYPE REF TO data,
l_fieldcat_str TYPE /sapapo/am_aot_fieldcat_str,
ls_fieldcat TYPE LINE OF lvc_t_fcat,
ls_t_fieldcat LIKE LINE OF t_fieldcat,
l_alert_str TYPE LINE OF /sapapo/alert_tab,
l_str_ref TYPE REF TO data,
l_str_ref_1 TYPE REF TO data.
FIELD-SYMBOLS: <aot_tab> TYPE STANDARD TABLE,
<aot_tab_1> TYPE STANDARD TABLE,
<alert_str> TYPE /sapapo/alert_str,
<aot_str> TYPE ANY,
<alert_str1> TYPE c,
<alert_str_uc> TYPE c.
FIELD-SYMBOLS: <zat103> TYPE c. "ANY.
DATA : l_col_pos TYPE i,
gv_entries TYPE i,
xlength TYPE i.
FIELD-SYMBOLS : <info> TYPE ANY,
                  <aot_str1> TYPE ANY.
DATA olen1 TYPE i.
DATA: t_pegid TYPE STANDARD TABLE OF /sapapo/amopegid_tab,
        t_ordid TYPE STANDARD TABLE OF /sapapo/amoordid_tab.
CLEAR: l_alert_str,
    l_table_ref ,
    l_table_ref_1 ,
    l_fieldcat_str ,
    ls_fieldcat ,
    ls_t_fieldcat ,
    l_str_ref .
*Add new column
READ TABLE t_fieldcat INTO ls_t_fieldcat INDEX 1.
DATA: x1 TYPE lvc_t_fcat,
       y1 LIKE LINE OF x1.
x1 = ls_t_fieldcat-fieldcat.
LOOP AT x1 INTO y1 WHERE reptext NE space.
    CHECK y1-fieldname NE 'DELIVERY_DATE'.
    xlength = xlength + y1-intlen.
ENDLOOP.
DESCRIBE TABLE x1 LINES gv_entries.
Appending Delivery Date
ls_fieldcat-col_pos = gv_entries + 1.
ls_fieldcat-fieldname = 'DELIVERY_DATE'.
ls_fieldcat-ifieldname = 'DELIVERY_DATE'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Delivery Date'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = '/SAPAPO/DELIVERY_DATE' . "'DATS'.
ls_fieldcat-domname = '/SAPAPO/CHAR20'."'/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Delivery Date'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending Start Date
ls_fieldcat-col_pos = gv_entries + 2.
ls_fieldcat-fieldname = 'STARTDAT'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Start Date'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Start Date'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending Required Shelf Life Date
ls_fieldcat-col_pos = gv_entries + 3.
ls_fieldcat-fieldname = 'SL_MIN_DAT'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Req.SL dte'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Req.SL dte'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending Shelf Life Date/Required Maximum Shelf life Date
ls_fieldcat-col_pos = gv_entries + 4.
ls_fieldcat-fieldname = 'SL_MAX_DAT'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'SL Date 2'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'SL Date 2'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending (Availability/Requirements) Date of a Schedule Line
ls_fieldcat-col_pos = gv_entries + 5.
ls_fieldcat-fieldname = 'AVL_REQ_DATE'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Schedule Date'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Schedule Date'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending Req Date/ Shipment end date
ls_fieldcat-col_pos = gv_entries + 6.
ls_fieldcat-fieldname = 'SHIP_MAX_DATE'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Req Date/ Shipment end date'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Req Date/ Shipment end date'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending Expected Grading Date
ls_fieldcat-col_pos = gv_entries + 7.
ls_fieldcat-fieldname = 'GRAD_DATE'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Expected Grading Date'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Expected Grading Date'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
Appending Available Date
ls_fieldcat-col_pos = gv_entries + 8.
ls_fieldcat-fieldname = 'AVAIL_DATE'.
ls_fieldcat-tabname = '1'.
ls_fieldcat-seltext = 'Available Date'.
ls_fieldcat-outputlen = '10'.
ls_fieldcat-rollname = 'DATS'.
ls_fieldcat-domname = '/SAPAPO/DATUM'.
ls_fieldcat-coltext = 'Available Date'.
APPEND ls_fieldcat TO ls_t_fieldcat-fieldcat.
MODIFY TABLE t_fieldcat FROM ls_t_fieldcat.
DATA lvc_t_fcat TYPE lvc_t_fcat.
*CODE FOR ADDING THE NEW VALUES*
ASSIGN Alert Structure to Field Symbols for Unicode
ASSIGN COMPONENT 0 OF STRUCTURE l_alert_str
                     TO            <alert_str>           CASTING.
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = ls_t_fieldcat-fieldcat
    IMPORTING
      ep_table        = l_table_ref.
*assign dynamic structure
ASSIGN l_table_ref->* TO <aot_tab>.
CREATE DATA l_str_ref LIKE LINE OF <aot_tab>.
ASSIGN l_str_ref->* TO <aot_str>.
ASSIGN l_str_ref->* TO <alert_str_uc> CASTING.
LOOP AT t_alerts INTO l_alert_str.
   READ TABLE t_fieldcat WITH KEY aot = l_alert_str-aot
   INTO l_fieldcat_str.
   CALL FUNCTION '/SAPAPO/ATAB_FIELDCAT_GET'
     EXPORTING
       aot        = l_fieldcat_str-aot
       mview      = l_fieldcat_str-mview
     IMPORTING
       table_ref = l_table_ref
       t_fieldcat = lvc_t_fcat.
    ASSIGN l_alert_str TO <alert_str>.
*copy alert to aot-specific structure
    MOVE <alert_str>-info TO <alert_str_uc>.
*Write this code inside the loop
    ASSIGN COMPONENT 'DELIVERY_DATE' OF STRUCTURE <aot_str> TO <zat103>. "CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'STARTDAT' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'SL_MIN_DAT' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'SL_MAX_DAT' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'AVL_REQ_DATE' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'SHIP_MAX_DATE' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'GRAD_DATE' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    ASSIGN COMPONENT 'AVAIL_DATE' OF STRUCTURE <aot_str> TO <zat103> CASTING.
    IF sy-subrc = 0.
      CLEAR <zat103>.
*Fetch ur own custom value and move to the field symbol. This
*dynamically populates ur structure.
      <zat103> = '22.11.1999'.
    ENDIF.
    MOVE <alert_str_uc> TO <alert_str>-info.
    MODIFY t_alerts FROM l_alert_str INDEX sy-tabix.
    CLEAR : <alert_str>, <alert_str_uc>.
ENDLOOP.
I have even tried Concatenating Values, with that method even though the NEW Values are available but they do not fall under the correct Column.
PLEASE help me out cos I am really Stuck.
Regards
Abhishek Sahi

How to pass values to Oracle store procedure in Crystal Report

Hi all,
I am newbie on passing values to stored procedure parameters. I created a Crystal Report using the Crystal Report wiward with PULL method and data come from Oracle stored procedure. In an ASP.NET page, I have stored two values in Session and need to pass them as input parameters to Oracle stored procedure to print the report. In Crystal reports 2010 once you connect to a stored-procedure as data source, it automatically creates the parameter fields with Crytal Report Viewer. Please show me how I pass values to store procedure at runtime automatically.
        'Set the parametter value
        myReport.SetParameterValue("@P_COURSE", "CoursetNo")
        myReport.SetParameterValue("@P_CLASS", "ClassNo")
    End Sub
I tried to apply above codes from Brian Bischof book but display the error from the following lines:
        myReport.SetParameterValue("@P_COURSE", "CoursetNo")
        myReport.SetParameterValue("@P_CLASS", "ClassNo")
I also enclosed my code. Any experts, please let me know anything wrongs on my code . I tried several methods that searching via google, but did not solve my issues. Thanks.
Edited by: avt2K7 on Mar 15, 2011 7:02 AM

Hi,
Thank you for your response. Here are the detailed code and error as following:
Please show what I am missing in my below VB.NET codes:
===========================================================================================
    Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
        LogonToTables("username", "password", "servername", "")
    End Sub
    Private Sub LogonToTables(ByVal myUserId As String, ByVal myPassword As String, ByVal myServerName As String, ByVal myDataBaseName As String)
        Dim Course, Class As String
        Course = Session.Item("CourseNumber"))
        Class = Session.Item("ClassNumber"))
        Dim myReport As New CrystalDecisions.CrystalReports.Engine.ReportDocument
        myReport.Load(Server.MapPath("CrystalReport1.rpt"))
        Dim myTableLogonInfo As CrystalDecisions.Shared.TableLogOnInfo
        'Set the database properties and security credentials
        Dim myConnectionInfo As New CrystalDecisions.Shared.ConnectionInfo
        myConnectionInfo.ServerName = "servername"
        myConnectionInfo.DatabaseName = ""
        myConnectionInfo.UserID = "username"
        myConnectionInfo.Password = "password"
        'Apply the ConnectionInfo to the report tables
        Dim myTables = myReport.Database.Tables
        For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
            myTableLogonInfo = myTable.LogOnInfo
            myTableLogonInfo.ConnectionInfo = myConnectionInfo
            myTable.ApplyLogOnInfo(myTableLogonInfo)
        Next
        'Set the parametter value to Crystal Report parameter named P_COURSE and P_CLASS
        myReport.SetParameterValue("@P_COURSE", "Course")
        myReport.SetParameterValue("@P_CLASS", "Class")
    End Sub
=================================================================================
I put a break point to debug but display the error at the following lines:
        myReport.SetParameterValue("@P_COURSE", "Course")
        myReport.SetParameterValue("@P_CLASS", "Class")
Eventhough, if I set a specific value to Course=1000 and Class = math and still receive the error:
Invalid index. (Exception from HRESULT: 0x8002000B (DISP_E_BADINDEX))
I tried several sources from Google search but it is not working. I really appreciate any detailed code either in C# or VB.NET to solve my issues. Thanks in advance.

Passing value to a field of SAP Program which do not have "Parameter ID"

Dear Experts,
My requirement is that i need to pass a value from my dialog program to a field of SAP Program which do not have "Parameter ID" attached to it.
For example: If you run SAP Transaction CS14, it has two sections viz., Primary BOM and Secondary BOM. I need to copy and create own screen using Dialog program. The screen appears in custom screen would be similar to that of the SAP Transaction CS14. If you check the fields, all the fields have "Parameter ID" attached to it, except for the following fields which do not have Parameter IDs are "Alternative", "Valid From" and "Required Qty".
Hence how do i pass value to those fields? Kindly help me
To those fields where "Parameter IDs" are attached, i can use below two statements:
Set parameter id <par> field <field>.
call transaction 'CS14' and skip first screen.
Regards,
Ramesh Manoharan

Hi Harald Boeing,
Thanks you very much. My problem is solved.
Rewarded Points.
Regards,
Ramesh Manoharan

How to pass value to select-option parameter using SET PARAMETER Command

Hi,
Am passing values to selection-screen fields in report RV13A004 ( used in VK11, VK12 and VK13). using below statement but material number is select-option in this report. am able to pass MATERIAL FROM using SET PARAMETER ID, can i know how to pass values MATERIAL TO range in select-options fields using SET PARAMETER Command ??
Passing values to parameter id
set parameter id 'VKS' field kschl.
set parameter id 'VKO' field vkorg.
set parameter id 'VTW' field vtweg.
set parameter id 'KDA' field erdat.
set parameter id 'MAT' field matnr_from.
Change condition price.
call transaction 'VK12' and skip first screen.
Thanks in advance.
Regards,
Balamurugan.

Hi,
instead of using set parameters and dden call transaction use this..........
submit RV13A004 WITH SELECTION-TABLE rspar
Effect
If you specify this addition, parameters and selection criteria on the selection screen are supplied from an internal table rspar. You must specify an internal table with the row type RSPARAMS for rspar. The structured data type RSPARAMS is defined in the ABAP Dictionary and has the following components, all of which are data type CHAR:
SELNAME (length 8),
KIND (length 1),
SIGN (length 1),
OPTION (length 2),
LOW (length 45),
HIGH (length 45).
To supply parameters and selection criteria for the selection screen with specific values, the lines in the internal table rspar must contain the following values:
SELNAME must contain the name of a parameter or selection criterion for the selection screen in block capitals
KIND must contain the type of selection screen component (P for parameters, S for selection criteria)
SIGN, OPTION, LOW, and HIGH must contain the values specified for the selection table columns that have the same names as the selection criteria; in the case of parameters, the value must be specified in LOW and all other components are ignored.
If the name of a selection criterion is repeated in rspar, this defines a selection table containing several lines and passes it on to the selection criterion. If parameter names occur several times, the last value is passed on to the parameter.
The contents of the parameters or selection tables for the current program can be entered in the table by the function module RS_REFRESH_FROM_SELECTOPTIONS.
Notes
In contrast to selection tables, the data types of the components LOW and HIGH in table rspar are always of type CHAR and are converted to the type of the parameter or selection criterion during transfer, if necessary.
When entering values, you must ensure that these are entered in the internal format of the ABAP values, and not in the output format of the screen display.
Cheers
Will.

How to pass values between views in FPM - GAF

Hi Experts ,
i have a doubt in FPM how to pass values between views .
For Example: i am having 2 views - 1 ) overview , 2 ) edit using the GAF
in 1st view (overview ) i have a table displaying the employee details , i will select a single employee from that table for editing .
how to pass the selected employee details to the 2 nd view (edit ) .
Thanks & regards
chinnaiya P

Hi chinnaiya pandiyan,
Please follow below steps:
1. To achieve this u need to create two context nodes in the component controller.
2. Say one is EMPLOYEE_DATA and other is SELECTED_DATA.
3. Set the Cardinality of EMPLOYEE_DATA to 0..n and SELECTED_DATA to 1..1.
4. Add same attributes to both nodes. (probably all those fields that are required in table and/or in edit view.
5. Map both these nodes to OVERVIEW view.
6. Map only SELECTED_DATA node to EDIT view.
7. Create table in OVERVIEW view based on EMPLOYEE_DATA node.
8. Create edit form in EDIT view based on SELECTED_DATA node.
9. While navigating from OVERVIEW view to EDIT view, read the selected element of EMPLOYEE_DATA node and copy it to an element of SELECTED_DATA node. This should be written in PROCESS_EVENT method of component controller inherited from FPM component.
10. Now u got the selected data in SELECTED_DATA node which will be displayed in EDIT view.
Regards,
Vikrant

How to Pass values between one webdynpro application to another

Hi ,
I know How to Pass Values Between the Application by URL But For My Requirement NO need The Pass in URL Rather Than That Please any one TEll me How to GEt VAlues BEtween the application......
Thanks
ANANTH.

If you dont want to pass values through URL, then you must have to use component Usage with interface node.
Or you can try like this,
by appending field value to url,
Data w_url type string,
w_value type string.
get the url of calling aplication
call method cl_Wd_utilities->construct_wd_url
exporting application name = name of second application( to which u want to pass parameter )
importing out_absolute_url = w_url.
***Make the value type compatible that has to passed with url.
w_string = lv_pernr
***Now attach the parameter and its value with url that have to passed to 2nd application
call method cl_http_Server=>append_field_url
exporting name = 'pernr'
value = ' w_value'
changing url = w_url.
then popup window for 2nd application with above url
lo_window = lo_window_manager->create_external_application ( url = w_url ).
lo_window -> open( ).
***now in wddoinit of 2nd application
data lv_param type string
lv_param = wdr_task=>client_window->get_parameter( ' pernr ').
Now you can use lv_param in 2nd application.
Regards
srinivas

How to pass values of the prompt through Action Link - URL in 11g

Hi All,
I am in OBIEE 11g v6.
Let's say, I have two dashbaord pages P1 and P2.
P1 page contains
1. Prompt PR1 - containing a single column EmpName
2. Report R1
P2 page contains
1. Prompt PR2 - containing a single column EmpName (same column as in PR1)
2. Report R2
Requirement :
Let's say a user select a value = David from the EmpName column in prompt PR1. In the Report R1, on one the measure columns 'Sales', I am using an action link - Navigate to URL ( I can't use Navigate to BI Content for some reasons). In the URL, I am giving the URL to page P2. Can I pass the selected value (which is David) to the EmpName column of the Prompt PR2 of Page P2 so that Report R2 is automatically limited by David when I land on that page through the URL?
Few things to consider are, I can't use EmpName column in my report R1 on page P1, I just want to pass the value of a common column from one prompt on Page1 to another prompt on Page2. Is that possible. Can anybody please help?
Thanks,
Ronny

Hmm can you give a try one more time with
Add EmpName name and hide it on report R1 on page P1
and set EmpName as Is Prompted on report R2 on page P2 and with my earlier steps should work.
Other option is read this doc once that helps you how to pass value thru url.
http://docs.oracle.com/cd/E21043_01/bi.1111/e16364/apiwebintegrate.htm#z1005224
You need to have a EmpName as Is Prompted on report R2 on page P2
If helps pls mark

How to pass values at runtime in JDBC - XI - File scenario

Hi friends,
In my scenario, data is coming from R/3 and i need to filter records from oracle database based on this data. There are 4 database tables that need to be queried using 2 select statements. The resultset after the execution of query will be mapped to the target flat file structure.
here are my queries:
1) Can I avoid BPM as data needs to be collected from the two database calls which involves two sender JDBC adapter instances with only one target structure?
2) Can I use stored procedure in this scenario? If yes, than how to pass values to stored procedure at runtime via sender JDBC adapter.
Thanks and regards,
Nitin aggarwal.

Hi Nitin,
"..So i want to know if i can write multiple select statements in the stored procedure.."
Read the below line that is mentioned in the SAP help documentation fro Sender JDBC adapter:-
<i>Specify an SQL EXECUTE statement to execute a stored procedure, which contains exactly one SELECT statement.</i>
I dont think it can be achieved...but there must be some workaround for this. You can probably use a join statement.
Read this, again from the documentation:-
<i>The expression must correspond to the SQL variant supported by the relevant JDBC driver. It can also contain table JOINs.</i>
Regards,
Sushumna

How to enter values in the fields of standard SAP Infotype e.g. IT0024

Hi,
How to enter values in the fields of standard SAP Infotype?
e.g. I want to enter values in infotype IT0024(Qualifications) in the field AUSPR(Profincy):-
1-Level 1
2-Level 2
3-Level 3
4-Level 4
5-Level 5
Thanks,
Ameet

Hi Divya,
I checked with the screen and report which is mentioned by you. But I want to modify/make changes that should appear in the screen when you view details for a particualar employee in Qualifications(IT0024).
Please refer the screen 2000 of module pool MP002400 in SE80. In that screen I want to make change as listbox with key.
Can it be achieved in the same way as mentioned by you before by making standard SAP report as Z and then modify using layout editor?
Please help me out. I think I am almost there.
Thanks,
Ameet

How to pass the arguments dynamically to a Oracle procedure.

Hi all..
How to pass the arguments dynamically to a procedure.
Thanks in Advance.

I have a concurremt program which has 5 parameters right now. The user can add more parameters from front end as per their requirement.
So that time.. the 6th parameter has to add to my procedure dynamically.
Thanks.

How to pass values in dynamic fields in LX03

Similar Messages

Maybe you are looking for