How to passing lowercase values to RFC/BAPI using webdynpro for JAVA

Hi Exerts,
When we sending values to RFC/BAPI through webdynpro (JAVA), the values are sent in capital (uppercase) letters to ECC.
So if we fill xxxx, it is send like XXXX. Why? and how to avoid this?
Thanks in advance,
Joeri

Hi,
There could be two possibility if you are storing this value in ABAP table.
1. You are entering value in UPPERCASE in your webdynpro application.
2. The data stored in ABAP table, converts value in small to upper case.
1. Can you tell me how you are passing this value, is user entering value in some input field which is binded to some context and this value are you passing to RFC/BAPI...???
Or else before passing value to RFC/BAPI you can use toLowerCase string function and the npass this value to RFC/BAPI
e.g String name = wdContext().currentContextelement().getName().toLowercase();
Now pass this name to RFC/BAPI is should go as lowercase only..
This is from webdynpro java side..
2. If you are storing this value in ABAP table, check the domain/type of variable in ABAP table for which you are storing the value. Ask ABAPper, so that this value are stored in small case letter.
There is one tick in domain which you need to remove so that it stores in lower case. I dont have exact information but you can consult this with ABAPer.
Hope this information helps guy ..!!!!
Regards,
Jigar

Similar Messages

How to connect to BAPIS Using webdynpro for java?

Hi guys ,
I am new to sap world . Can any body give overview how to
connect BAPIS FUNCTION MODULES using in webdynpro?

Hi Ramana,
Welcome to SAP world.
You have lot of tutorials at SDN on the using BAPI's in WebDynpro.
Please go through this link and follow the tutorial :
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/f0b0e990-0201-0010-cc96-d7ecd2e51715
Make sure you configure your SLD and create JCO connections which is also given in the above link.
Also go through the following link.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/41/38bc8f813719488ddc9d9b21251ec3/frameset.htm
Do get back incase u need further explanation.
All the best.
Thanks & Regards,
Vijith

How to start to work on MDM JAVA API by using webdynpro for java

Hi all
I have basic idea on MDM business package thru portal by using standard iViews.
now i am planning to work on MDM JAVA APIs by using Webdynpro for Java as UI.
1) can you please share the required documents on the same. how to start working on this by using MDM JAVA APIs in webdynpro for java
2) what are the JARs files are required and how to integrate those jar files into webdynpro for java application.
3) is there any SDN help on MDM JAVA API with webdynpro for java? . can you please send the link on the same.
4) can you please help by providing sample code on how to use JAVA APIs for retrieving,deleting,inserting and Updating the data in the database.
if anybody helps on the same then it is the great help to me.
points are always rewardable...
Regards
Suresh babu

Hi Suresh,
You can have the MDM JAVA API javadocs from the link
http://help.sap.com/javadocs/MDM/SP06P2/index.html
There you can see a package named com.sap.mdm.examples.The classes in it contains some examples using which you can start understanding the code.
You need to have MDM JAR files for it. And these JAR files to be used at build time can be added to the project thru :-
Right click on project-> properties->Java Build Path - > Add external JARs
At run time you can add them the reference in
Right click on project-> properties->web dynpro references->library reference.
Thanks
Namrata

How to use BAPI in webdynpro for java application

Hi all,
Please help in getting started with calling a BAPI in a webdynpro for java application. I have got only the content needed to call a BAPI in a webdynpro for abap application but not in java. Kindly provide me some documents if possible.
Thanks in advance

Hi ,
U have Created One Bapi u want to work with web Dyn pro for java Application Right .
U need the Following
1) NWDS (Netweaver Devloper Studio )
2) jdk1.4 or Above installed in your system .
After Installation of NWDS .
1) Just Take J2EE Enginee Details
a) Go to Window -> preferences -> J2ee Enginee - > give ur port number , Host name Details . and click finsh .
Go To Web Dyn Pro Perspective Click onj2EE engine .
Click On Refresh U will see Green Colour button .
Now ur Ready to import Ur BAPI .
1) Go to File -> New -> Project - > Web Dyn pro Project -.
Give Name , pkg Name Click On Finish .
2) Expand ur project hirarchy -> go TO Application -> Right Click -> Create Application - > Give Application name and Pkg name -> Click on Finish .
3) Now ur View And Controller Are Created by Default .
4) Go to Model-> Right Click on it-> Create Model -> Give Model Name & Pkg name Should diff from Application pkg the Click On Next
a) Here u have to Two JCo Destination Name Like Model Data And Meta data & R/3 System Details like System Number , Host name Etc -> then Click on next .
b) Here u will text filed where u want to search for ur Required BAPI . Type ur BAPI Name Click on Search . Ur bapi will be displyed In Down . click on Next .
c) Now Ur model is Importedint into NWDS .Map ur model data To Controller and Controller Element to View Elements .
After ur Model .
Go to -> Project Name -> Right Click -> go to -> Deploy New Archive .
after wards u have to go Apllication -> Right click -> deploy and Run .
ur output will be displyed thru Browser .
Thats it
Regards ,
venkat

How to find who is login Portal by using webdynpro with java

Hi Friend
One Supplier( Abc) Login into the portal . How to find it "ABC" user login into portal by using webdynpro with java
My requirement is
One Supplier login in to the portal that supper having one Vendor number ( it is fixed)
Exp: Portal user vijay login his vendor number 12345 like
        Suppose u r login into the portal u have one vendor number like this
i have to desine one screen that is find PO'Status Screen, In that Screen, Meterial Group,line number,PO Status and Vendor number is avaliable.
Supplier login in to that portal he is finding some items.
this my Requirement. i m creating this screen ..How to fined user name from portal .once i have to find this user name by using webdybpro with java. I have to assine vendor number
Regards
Vijay

Hello Vijay,
You can wirte the following code to get the logged in user's ID
try {
          IWDClientUser wdClientUser = WDClientUser.getCurrentUser();
          IUser sapUser = wdClientUser.getSAPUser();
          IUserAccount[] acct = sapUser.getUserAccounts();
          String str = acct[0].getDisplayName();
          wdComponentAPI.getMessageManager().reportSuccess("user "+ str);
     } catch (WDUMException e) {
          // TODO Auto-generated catch block
          e.printStackTrace();
     } catch (UMException e) {
          // TODO Auto-generated catch block
          e.printStackTrace();
You need security api for using it make sure that is present.
Thanks,
Hope this will help
Sarbjeet

How To pass the value within the page using jsp?

How to passing the textbox value within the jsp page without using javascript or reload the page.
I have a scenario like this:
I have a textbox named as "accno" which allow user to key in the accno. After key in the accno, this accno value will used to do a query from database using jstl.
here is part of my code
<input name="accno" type="text" onChange="checkLC()"/>
<sql:query var="results" dataSource="${db}">
select accno,name from account where accno = '<%=value get from accno textbox%>'
</sql:query>
<c:out value="${result.rows[0].name}"/>
note that onChange() is the javascript when user key in accno then automatically go to check database then only show out the name. So how can i get the '<%=value get from accno textbox%>' from accno textbox.

How to passing the textbox value within the jsp page
without using javascript or reload the page.No, jsp executes on the remoter server, the text box is on a client machine, you need to send information to the server over the network, http does this with a request, which will reload the page.....................

How to pass the values to stored proc using presentation variable in OBIEE

Need your help regarding in resolving an issue in OBIEE 10.1.3.4.1
There are 6 reports say ‘A’,’B’,’C’,’D’,’E’,’F’ in the same subject area.
The reports are being configured with prompts using either the repository/presentation variables.
One of the reports say ‘A’ has been configured to pass the values using presentation variables from the prompt in Advanced Tab of the report request to the stored procedure defined in the Execute Before Query section of the connection pool.
After running another report ‘B’ in the same subject area, upon visiting the report ‘A’ view display error is being seen ( Please have a look below screen shot for your reference) .
Speculate the issue is around presentation variables of report ‘A’ getting initialized even before running the report.
Appreciate your earliest advise as this is a prod issue.

Hi Prasad,
I got your note, you should not use Session variable syntax to call presentation variable.
you should use like @{AIC_PROJ_PLAT_SEQ_NO}
One more thing: first test the variable AIC_PROJ_PLAT_SEQ_NO value then try to pass to SP.
Hope this helps

ABAP RFC Validations in WebDynpro for Java

Hi All,
Any idea how I can handle ABAP validations in WebDynrpo for Java. For example, there is a standard BAPI for (MM01), howare the validations and ECC Configurations (as in plant data etc) shown in WDJ. Do they also come as some drop-down or search help etc?
Thanks,
Vamshi

Dear Vamshi,
In broad terms this is what you will need
1) you need to configure JCOs (that is if they are not configured already)
2) you need to implement the necessary MODELS for your WD for JAVA. These models will then be used to retrieve data to and from your RFC.
There's plenty information on SDN on how to implement a MODEL in WD for JAVA.
Here's a nice one to begin with:
[http://wiki.sdn.sap.com/wiki/display/WDJava/FAQ-Models-Adaptive+RFC]
Kind Regards
/Ricardo Quintas

How to pass table values in Create Bapi Wrapper

Hi All,
       Am using create BAPI Wrapper in that how to map the fields inside BAPI Import Structure .
Thanks&Regrads,
Arun

Hi,
Am using standard RFC " QIBP_INSPCHAR_SETRESULT " for creating result recording in SAP QM. And BAPI_INSPOPER_GETDETAIL for getdetail i want to create BAPI wrapper for these 2 i already created BAPI wrapper for get detail . I dont know how to create Create BAPI wrapper.
In QIBP_INSPCHAR_SETRESULT am passing inupt
INSPLOT      LIKE         QALS-PRUEFLOS
INSPOPER     LIKE     QAPO-VORNR
INSPCHAR     LIKE     QAMV-MERKNR
INSPSAMPLE     LIKE     QASV-PROBENR
CHAR_RESULT     LIKE     BAPI2045D2
so i want to know how i can pass    1 . CHAR_RESULT structrue values
                                                           2. INSPLOT,INSPOPER,INSPCHAR again repting inside CHAR_RESULT so how to map these
                                                                in SDOE_WB
Pls explain how to create BAPI Wrapper for this and how to map details.

How to pass hidden values to a report using reports6i

Hi,
I have created a fully running report
and calling this report from a java based application. Now i wish to write a query
which will filter the data on the basis of user id sent by java based application. This value can be in session or cookie. I need to send this value as a hidden variable and use this in the data model to write a query. Is this possible using reports 6i.
null

Shailesh,
Is is necessary to send the parameter hidden? You can use the cgicmd.dat file to put all the parameter in and on the url specify the key within the cgicmd.dat file. If you have a set of know values this might work, but if you are reacting to the parameter to create what is being used in the report it might be difficult. For more information on the cgicmd.dat file see the manual "Deploying Applications to the Web" at http://www.oracle.com/pls/use/use_asset_html.download_asset_form?p_user_id=100&p_asset_id=110924&p_url=http://technet.oracle.com/doc/dev2k.210/guide21/d2k_web.htm&p_queryid=2184408
Hope this helps a little.
Regards,
The Oracle Reports Team

Passing values to RFC/BAPI Table

Hi,
I am having a very strange problem. While passing the values to RFC/BAPI table using add method the values are not passed to backend SAP. Below is the code which I am using just to pass some data in RFC/BAPI table.
The same code was working few days back. Is there any configuration in JCO or any other problems other than the code?
Your l help is greatly appreciated.
public void executeZtest_Function_Input( )
//    //@@begin executeZtest_Function_Input()
//     //$$begin Service Controller(943377124)
       IWDMessageManager manager = wdComponentAPI.getMessageManager();
       try{
Ztest_Function_Input input = new Ztest_Function_Input();
       for (int i=0; i<5;i++){
            Zhr_Ear_Cclist cc =new Zhr_Ear_Cclist();
            cc.setFi_User("[email protected]");
            input.addIcc_List(cc);
       wdContext.nodeZtest_Function_Input().bind(input);
       wdContext.currentZtest_Function_InputElement().modelObject().execute();
            wdContext.nodeOutput().invalidate();
       } catch(WDDynamicRFCExecuteException ce) {
            manager.reportException(ce.getMessage(), false);
     //$$end
    //@@end

Hi Raksh,
          I also got the same problem. Please check the following ways then you will solve problem.
1. First check the appropriate BAPI in SAP GUI Software. You have to determine where is the problem?. Is it in Dynpro or BAPI itself?.
2. Suppose the BAPI structure change you will wont't run. If BAPI strusture change you have to reimport BAPI.
3. Please check the JCo connectio using test Button. Then redeploy your project.
4. Rebuild your project then redeploy.
Check the above ways you may get answer.
Kind Regards,
S.Saravanan

How to access(connect) BI Data in webdynpro for java applications

Hi ,
is there any way to access and display the BI data in portal using webdynpro for java applications like we did in Visual composer.
if not how to integrate the BI data in webdynpro applications ?
Regards,
Govindu

Hi,
Yes there are ways to do it. But may your scenario and the scenario for which I have done may differ.
You can use openhub to get the data in a flat file and then read it into weddynpro through a java service OR
You can use DBlink(which i have done).
Please refer the link below:
[Link|Data from BW to Oracle.;
This I have done in NW04s. Not sure whether a better solution is available in the newer release.
Hope it helps.
Regards,
Manoj

How to pass multiple values from workbook to planning function ?

Hi,
I have created Planning function in Modeler and it has one parameter(Variable represents = Multiple single values).
When executing the planning function by create planning seq. in the web template : I see value of variable store data like ...
A.) input one value -> V1
B.) input three values -> V1;V2;V3
This function execute completely in web.
However, I want to use the planning function in workbook(Excel).
The value of variable can't input V1;V2;V3... I don't know how to pass multiple values from workbook to parameter(Multiple single values type) in planning function ?
thank you.

Hi,
Please see the attached how to document (page no 16).
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be">how to</a>
Hope this was helpful
thanks

How to pass a value from the report to a form ( BIT OF URGENT ).

Hi,
I had created a "Form on a Table with Report" on the report I had remove the edit link and set one of the column feilds that functionality. Now I want to know how to pass that value that is clicked ( having hyper link ) on to the form where it runs a SQL query and then displays the reuslts on the form.
Illustrating with an example.
I am having these following columns on the report ( these are the results for the join statement )
JOBNUM JOBNAME DEPTNUMBER SAL EMPNO LNAME FNAME
In the above JOBNUM is having Hyper link as I removed the edit image.
Now this is area I am having problem. When the user clicked on the JOBNUM then on form it should display 20 other columns( pulled from 5 other tables ) which are related to that particualr JOBNUM.
Anybody give me a solution in which area I have to include my SQL statement and how to pass that selected value to that SQL statement.
Cheers,
Krishna

Hi Ron,
I am doing exaclty what you have suggested me but no luck. I started changing the DEMO_CUSTOMERS application to my requirements.The report is working fine and on the report I have created a page attribute to the Hyper linked column and linked that to the page 2 and assign that attribute with #JOBNUM#.
I am able to pass that value on to form when I click on the JOBNUM. But the problem is I am not able to pass that value into the SQL query so that my query pulls 20+ columns on to the Form ( which is second page ).
Small clarification... On the form region it is said FORM NAME and type is HTML is that is the way the APEX was designed or does it need to say region type as FORM.
Thanks for your help in advance.
Cheers,
Krishna.

How to pass a value to a bind variable in a query report in oracle apex

Hi Guys,
I have requirement to send weekly reports via email to some users. The users should receive their own records in the report. The user details is stored in a table. What I am planning to do is to create a report query in oracle apex to generate the report and then run a function/procedure via a scheduler to email the report to respective users. Now my query is ............. is it possible to pass a value (user name) to the report query to pull records of only that user? I know we can have bind variables in the report query but I have no idea how to pass a value for bind variables from a function/procedure.
Can anyone help me on this issue or suggest a better approach?
Thanks,
San

You need to use dynamic sql
But please keep in mind that since you're using Oracle you may be better off posting this in some Oracle forums
This forum is specifically for SQL Server
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to passing lowercase values to RFC/BAPI using webdynpro for JAVA

Similar Messages

Maybe you are looking for