How to passing value into Captivate from html?

How to passing value into Captivate from html?
Or
How to communicate between objects in one slides?

Hi czhao0378 and welcome to the forums!
Captivate does not natively allow you to communicate your own
data, either internally or externally. The only way to make this
happen is to create your own functionality, either via custom-built
Flash objects or JavaScript code executed in the browser or a
combination of both.
The only example I've seen of any "data passing" inside
Captivate is a custom text input/output solution that was posted on
the Captivate Developer Exchange:
http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&loc=en_us&extid=1253 021
This solution consists of an input box that takes information
from the user on one slide and a second box that displays that
information on another slide. The functionality was built in Flash
and is embedded in Captivate as a Flash "animation". Unfortunately,
since this is a custom functionality, the information is not
included in the user completion results Captivate can pass to a
Learning Management System.
Since the solution mentioned above relies on a Flash
Actionscript variable to hold the information that is displayed,
you can also pass the information from HTML to Captivate using the
"SetVariable" command in JavaScript. This would at least allow you
to display your own HTML-based data inside Captivate.
Beyond that, I'm not aware of any other way to gather and
pass data in Captivate.

Similar Messages

How to pass array into xslt from java

i have a xslt in which i am passing some parameter from java there is one parameter which is a array in java which i need to pass becouse array length is not defined so that xslt will work dynakically according to the parameter.
right now i am passing parameter but not able to send the array parameter that's why my code is not fully dynamic
please give suggestion.
anagh

it is not possible to pass array by using XSLT, you can wirite all values into a String with certain delim symbol, pass this string, then use xsl.substring() to get different values.

How to pass values into a map

I can't find any obvious way of doing this.
for example, i have a value sitting in a BPEL variable, how do i use that value inside an XSL transformation?
in the BizTalk world, i could easily map two input schemas onto one output schema, so one of the input can contain any extra values i want to pass into the transformation.
but BPEL doesn't allow that.
the last resort i have now is use embeded java code to update the message after the transformation.
but then when it comes to updating repeating nodes, the built-in getVariableData function doesn't return a NodeList, it only returns the first found Node...
all in all, it's been very painful and hacky to get it to work.
Anyone knows a better way to do this?
Thanks!

maybe this post will help:
[http://blogs.oracle.com/rammenon/2007/05/07/] (+Passing BPEL Variable contents into XSLT as Parameters+)

Passing values to jsp from html..

Hi all,
I have a jsp containing a selection list and need to pass the value to the java segment of the jsp. When reserching this, I've found some info where an html page was created, an initial jsp was saving the info (or bean was used) and then a third jsp displayed the data (using buttons). This is too many steps and I'm needing a way for the same jsp to display containing the selected option (simulating a refresh with the post when the drop down list is used). Is redirecting while setting and getting attributes all at once feasible/possible or is there a better direction or work around for this?
Thanks in advance,
Geoff-

I would think submitting the page to itself, and setting hidden fields to signal that it is a resubmission, may be the way to go. If the new information being displayed is minimal, JavaScript may also work, by setting up an empty <div> or and setting the innerHTML or innerText properties. The advantage of the JavaScript solution is it would be quicker, having the client do all the processing, but it also browser dependant.

How to pass value from jsp to java bean

I have huge problem . How to pass value from jsp value to java bean.Please replay me soon

Use the <jsp:setProperty> tag. There are several ways to use it. The one you probably want is:
<jsp:setProperty name="bean_name" property="property_name" value="the_value_you_want_to_set"/>

How to pass parameter /1BCDWB/DOCPARAMS from webdynpro?

Hi Experts,
We create a wdp view and indert an adobe form into it. And this form has an interface based on XML schema.
Now we want to translate this form into multi-language, and in wdp side, we will display diffenent language version of form for different regions.
I found that there is a paramater /1BCDWB/DOCPARAMS-LANGU, and it seems can control the language version in processing.
But I donot know how to pass parameter /1BCDWB/DOCPARAMS from wdp to adobe form.
Its my 1st to use adobe form and wdp, i really have no way out. Any advice will be Appreciated.
Thank you.
Richard

@sahai: Hey no , I am using very very simple example without any query or complex statement. I just have 2 radio buttons in VIEW1. On clicking the radio button, the naviagtion to view2 is done and the value of selected radio button is passed as a parameter in the plug.
In the view2 , i just have a caption in my layout where i am displaying the parameter value by setting the attribute.THe warning i get is in view2. Here is the code. Apart from this there is no coding in view2.
METHOD HANDLEPLUG_IN_V2 .
 DATA:
 NODE_CAPT_MSG TYPE REF TO IF_WD_CONTEXT_NODE,
 ELEM_CAPT_MSG TYPE REF TO IF_WD_CONTEXT_ELEMENT,
 STRU_CAPT_MSG TYPE IF_VIEW2=>ELEMENT_CAPT_MSG ,
 ITEM_MSG LIKE STRU_CAPT_MSG-MSG.
* navigate from <CONTEXT> to <CAPT_MSG> via lead selection
 NODE_CAPT_MSG = WD_CONTEXT->GET_CHILD_NODE( NAME = `CAPT_MSG` ).
* get single attribute
 NODE_CAPT_MSG->SET_ATTRIBUTE(
 EXPORTING
 NAME = `MSG`
 VALUE = PAR_1 ).
ENDMETHOD.

How to pass parameters into Function module : CLOI_PUT_SIGN_IN_FRONT

Hello friends,
I am displaying values ie, amounts in the screen using write statements here i have to display the
sign left side , i am using Function module 'CLOI_PUT_SIGN_IN_FRONT'
Does anybody help me - How to pass paramter into this Function module.
Regards,
Phaneendra

If you look to the code of the function module, you can see it is condensing the value.
I would make a copy of this function, and remove the condense lines to give the result you want.
data: text1(1) type c.
search value for '-'.
if sy-subrc = 0 and sy-fdpos <> 0.
 split value at '-' into value text1.
 condense value.
 concatenate '-' value into value.
else.
 condense value.
endif.

How to pass parameter into a source variable of a invoke activity

I'm an new BPELer, I created a invoke activity to submit Oracle Appplications concurrent program, but I don't know how to pass parameter into source variable.
BTW, I have created the mapper file (.xsl) file.
could anyone tell me how to do that?
Thanks,
Victor

Hi.
How you start application? I think you send message to webservice(BPEL process is webservice too). So construct message with variable and value.
But I created only processes where input value doesn't matter. I haven't use mapper yet too.

How to pass values of the prompt through Action Link - URL in 11g

Hi All,
I am in OBIEE 11g v6.
Let's say, I have two dashbaord pages P1 and P2.
P1 page contains
1. Prompt PR1 - containing a single column EmpName
2. Report R1
P2 page contains
1. Prompt PR2 - containing a single column EmpName (same column as in PR1)
2. Report R2
Requirement :
Let's say a user select a value = David from the EmpName column in prompt PR1. In the Report R1, on one the measure columns 'Sales', I am using an action link - Navigate to URL ( I can't use Navigate to BI Content for some reasons). In the URL, I am giving the URL to page P2. Can I pass the selected value (which is David) to the EmpName column of the Prompt PR2 of Page P2 so that Report R2 is automatically limited by David when I land on that page through the URL?
Few things to consider are, I can't use EmpName column in my report R1 on page P1, I just want to pass the value of a common column from one prompt on Page1 to another prompt on Page2. Is that possible. Can anybody please help?
Thanks,
Ronny

Hmm can you give a try one more time with
Add EmpName name and hide it on report R1 on page P1
and set EmpName as Is Prompted on report R2 on page P2 and with my earlier steps should work.
Other option is read this doc once that helps you how to pass value thru url.
http://docs.oracle.com/cd/E21043_01/bi.1111/e16364/apiwebintegrate.htm#z1005224
You need to have a EmpName as Is Prompted on report R2 on page P2
If helps pls mark

How to pass values to Oracle store procedure in Crystal Report

Hi all,
I am newbie on passing values to stored procedure parameters. I created a Crystal Report using the Crystal Report wiward with PULL method and data come from Oracle stored procedure. In an ASP.NET page, I have stored two values in Session and need to pass them as input parameters to Oracle stored procedure to print the report. In Crystal reports 2010 once you connect to a stored-procedure as data source, it automatically creates the parameter fields with Crytal Report Viewer. Please show me how I pass values to store procedure at runtime automatically.
        'Set the parametter value
        myReport.SetParameterValue("@P_COURSE", "CoursetNo")
        myReport.SetParameterValue("@P_CLASS", "ClassNo")
    End Sub
I tried to apply above codes from Brian Bischof book but display the error from the following lines:
        myReport.SetParameterValue("@P_COURSE", "CoursetNo")
        myReport.SetParameterValue("@P_CLASS", "ClassNo")
I also enclosed my code. Any experts, please let me know anything wrongs on my code . I tried several methods that searching via google, but did not solve my issues. Thanks.
Edited by: avt2K7 on Mar 15, 2011 7:02 AM

Hi,
Thank you for your response. Here are the detailed code and error as following:
Please show what I am missing in my below VB.NET codes:
===========================================================================================
    Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
        LogonToTables("username", "password", "servername", "")
    End Sub
    Private Sub LogonToTables(ByVal myUserId As String, ByVal myPassword As String, ByVal myServerName As String, ByVal myDataBaseName As String)
        Dim Course, Class As String
        Course = Session.Item("CourseNumber"))
        Class = Session.Item("ClassNumber"))
        Dim myReport As New CrystalDecisions.CrystalReports.Engine.ReportDocument
        myReport.Load(Server.MapPath("CrystalReport1.rpt"))
        Dim myTableLogonInfo As CrystalDecisions.Shared.TableLogOnInfo
        'Set the database properties and security credentials
        Dim myConnectionInfo As New CrystalDecisions.Shared.ConnectionInfo
        myConnectionInfo.ServerName = "servername"
        myConnectionInfo.DatabaseName = ""
        myConnectionInfo.UserID = "username"
        myConnectionInfo.Password = "password"
        'Apply the ConnectionInfo to the report tables
        Dim myTables = myReport.Database.Tables
        For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
            myTableLogonInfo = myTable.LogOnInfo
            myTableLogonInfo.ConnectionInfo = myConnectionInfo
            myTable.ApplyLogOnInfo(myTableLogonInfo)
        Next
        'Set the parametter value to Crystal Report parameter named P_COURSE and P_CLASS
        myReport.SetParameterValue("@P_COURSE", "Course")
        myReport.SetParameterValue("@P_CLASS", "Class")
    End Sub
=================================================================================
I put a break point to debug but display the error at the following lines:
        myReport.SetParameterValue("@P_COURSE", "Course")
        myReport.SetParameterValue("@P_CLASS", "Class")
Eventhough, if I set a specific value to Course=1000 and Class = math and still receive the error:
Invalid index. (Exception from HRESULT: 0x8002000B (DISP_E_BADINDEX))
I tried several sources from Google search but it is not working. I really appreciate any detailed code either in C# or VB.NET to solve my issues. Thanks in advance.

How to pass values at runtime in JDBC - XI - File scenario

Hi friends,
In my scenario, data is coming from R/3 and i need to filter records from oracle database based on this data. There are 4 database tables that need to be queried using 2 select statements. The resultset after the execution of query will be mapped to the target flat file structure.
here are my queries:
1) Can I avoid BPM as data needs to be collected from the two database calls which involves two sender JDBC adapter instances with only one target structure?
2) Can I use stored procedure in this scenario? If yes, than how to pass values to stored procedure at runtime via sender JDBC adapter.
Thanks and regards,
Nitin aggarwal.

Hi Nitin,
"..So i want to know if i can write multiple select statements in the stored procedure.."
Read the below line that is mentioned in the SAP help documentation fro Sender JDBC adapter:-
Specify an SQL EXECUTE statement to execute a stored procedure, which contains exactly one SELECT statement.
I dont think it can be achieved...but there must be some workaround for this. You can probably use a join statement.
Read this, again from the documentation:-
The expression must correspond to the SQL variant supported by the relevant JDBC driver. It can also contain table JOINs.
Regards,
Sushumna

How to pass parameter into transaction iview ?

Hi experts,
I want to know "how to pass parameter into transaction iview ".
Regards,
Krishna Balaji T

Hi Krishna,
Not sure if this can help you.
1) Passing a parameter to a transaction iview (I saw a resolved suggestion)
Passing a parameter to a transaction iview
2) Passing a parameter from the portal to R3 (helpful info for you)
Passing a parameter from the portal to R3
3) Create SAP Transaction iView using SAPGUI for Windows (Great Blog and info about TA Iview)
Create SAP Transaction iView using SAPGUI for Windows
Please check the following link for Transaction Iviews
http://help.sap.com/saphelp_nw2004s/helpdata/en/02/f9e1ac7da0ee4587d79e8de7584966/frameset.htm
Just some info: Portal is basically what the end user can see. What he can do, is still maintain in the backend system. If there are parameters setup already for the user in the backend system (in SU01), then those parameters should still valid for the transaction that the parameters are linked to.
Hope that helps and award points for helpful suggestions.
Ray

How to pass value to select-option parameter using SET PARAMETER Command

Hi,
Am passing values to selection-screen fields in report RV13A004 ( used in VK11, VK12 and VK13). using below statement but material number is select-option in this report. am able to pass MATERIAL FROM using SET PARAMETER ID, can i know how to pass values MATERIAL TO range in select-options fields using SET PARAMETER Command ??
Passing values to parameter id
set parameter id 'VKS' field kschl.
set parameter id 'VKO' field vkorg.
set parameter id 'VTW' field vtweg.
set parameter id 'KDA' field erdat.
set parameter id 'MAT' field matnr_from.
Change condition price.
call transaction 'VK12' and skip first screen.
Thanks in advance.
Regards,
Balamurugan.

Hi,
instead of using set parameters and dden call transaction use this..........
submit RV13A004 WITH SELECTION-TABLE rspar
Effect
If you specify this addition, parameters and selection criteria on the selection screen are supplied from an internal table rspar. You must specify an internal table with the row type RSPARAMS for rspar. The structured data type RSPARAMS is defined in the ABAP Dictionary and has the following components, all of which are data type CHAR:
SELNAME (length 8),
KIND (length 1),
SIGN (length 1),
OPTION (length 2),
LOW (length 45),
HIGH (length 45).
To supply parameters and selection criteria for the selection screen with specific values, the lines in the internal table rspar must contain the following values:
SELNAME must contain the name of a parameter or selection criterion for the selection screen in block capitals
KIND must contain the type of selection screen component (P for parameters, S for selection criteria)
SIGN, OPTION, LOW, and HIGH must contain the values specified for the selection table columns that have the same names as the selection criteria; in the case of parameters, the value must be specified in LOW and all other components are ignored.
If the name of a selection criterion is repeated in rspar, this defines a selection table containing several lines and passes it on to the selection criterion. If parameter names occur several times, the last value is passed on to the parameter.
The contents of the parameters or selection tables for the current program can be entered in the table by the function module RS_REFRESH_FROM_SELECTOPTIONS.
Notes
In contrast to selection tables, the data types of the components LOW and HIGH in table rspar are always of type CHAR and are converted to the type of the parameter or selection criterion during transfer, if necessary.
When entering values, you must ensure that these are entered in the internal format of the ABAP values, and not in the output format of the screen display.
Cheers
Will.

Default method - how to pass value to method container?

Hello,
I am dealing with a hyperlink in 'Objects and Attachements' section of the workitem.When i click on the link, the default method of the business object gets called automatically.
My question is: How to pass values to the default method (i.e. method container) as i don't invoke the method in my workflow explicitly? The method gets called when we click on the hyperlink.
Regards,
Monica.

Hello Monica,
a default method doesn't require parameters (and cannot make use of them), as they are designed to be called from various situation, such as the view from a workflow container, the display button within a workitem or the attachment list. So this is part of the system design.
To make an object dependent of workitem values I usually follow two different design patterns:
1) Using a flowitem/workitem instance with a special default method
- Create a subobject from type WORKITEM (if I'm going to use values from the current workflow instance) or subobject from type WORKINGWI (if I'm going to use values from the current dialog workitem).
- Do not make a general substitution for this new object type
- If using a ZWORKITEM, create an instance of this object type before the dialog step and then pass this object to the dialog workitem
- If using ZWORKINGWI, assign the object instance during the data flow to the step.
- In the properties of the object choose (any one) default method
- Within the coding you have the reference to the workitem/flowitem as object-key-... and you can further use functions/methods to read the workitem/flowitem container and do whatever has to be done
2) Retrieving values from the current workitem on-the-fly
Within the coding of the default method call the function module SWO_QUERY_REQUESTER that returns the instance/id of the current workitem-in-work (with is also set when using the hyperlink from a workitem). If the list is empty, there's no active workitem, otherwise use functions/methods to read the workitem container.
--> edit: Solution is not release safe, is it aint working with SAP R/3 Enterprise and higher
Best regards,
Florin
Message was edited by:
Florin Wach

Why I can't pass parameters into CR from VB6

I want to Pass parameters into crystal report from VB6.
But whatever I try, it don't work Fine,
always Show the message "This field name is not known".
Crystal Report::
Parameter: a.@cmpy;
                   b.@p1
formula:
a. If {?@cmpy} ="USA" or {?@cmpy} ="usa" then
      "This is test 1 sentences"
   else if {?@cmpy}="TWD" or {?@cmpy} = "twd" then
      "This is test 2 sentences"
b. if trim({?@p1})="1" then "This is test 3 sentences"
VB::
Public oApp As New CRAXDDRT.Application
Public oRpt As CRAXDDRT.Report
oRpt.ParameterFields(1).ClearCurrentValueAndRange
oRpt.ParameterFields(2).ClearCurrentValueAndRange
oRpt.ParameterFields(1).AddCurrentValue ("TWD")
oRpt.ParameterFields(2).AddCurrentValue ("1")
I had trid to use "IsCurrentValueSet" function to check whether parameter was set or not, and It responsed "Ture",so I so confused about it.
Anyone know about this??
ps. I had trid other way that change the formula indirectly, although it can work fine, but it isn't a right way to solve my problem.
Edited by: DeanLai on Jun 22, 2010 8:54 AM

I Find something.
First I tried to add parameter and wanted to see these value on Report.
So I inserted {?@cmpy} and {?@p1} into report, and used VB code
"oRpt.ParameterFields(1).AddCurrentValue ("TWD")" and "oRpt.ParameterFields(2).AddCurrentValue ("1")",
then ran the process, but it didn't display any value on report,
so why it couldn't pass value into parameter??
then I tried other way which was to add new parameter, and used the same way to pass
value into parameter, then it can display value on report.
So the different between these is {?@cmpy} and {?@p1} which come from
Stores Procedure.
While I set Database in crystal report, set all value into Store Procedure's
parameter(the window about "Enter Parameter Values"), then it automatic come out the DB columns and parameter(SP parameter)
, course include {?@cmpy} and {?@p1}.
Do this problem cause my question?
Can we pass value into parameter which come from SP parameter??
Can we use these parameter into forumla??
Edited by: DeanLai on Jun 30, 2010 11:56 AM

How to passing value into Captivate from html?

Similar Messages

Maybe you are looking for