How to Perform Failover When GAP on Standby

hi ,
i want to activate my standby in read/write
but i can't..i don't have archivelogs and i can't restore standby from incremental backup
ALTER DATABASE ACTIVATE STANDBY DATABASE
ALTER DATABASE ACTIVATE [PHYSICAL] STANDBY DATABASE (work)
Begin: Standby Redo Logfile archival
End: Standby Redo Logfile archival
Signalling error 1152 for datafile 1!
Beginning standby crash recovery.
Serial Media Recovery started
Managed Standby Recovery starting Real Time Apply
Media Recovery Waiting for thread 1 sequence 1174115
Fetching gap sequence in thread 1, gap sequence 1174115-1174214
Sat Nov 17 17:07:09 2012
Fetching gap sequence in thread 1, gap sequence 1174115-1174214
Sat Nov 17 17:07:19 2012
Fetching gap sequence in thread 1, gap sequence 1174115-1174214
Sat Nov 17 17:07:29 2012
Fetching gap sequence in thread 1, gap sequence 1174115-1174214
Sat Nov 17 17:07:39 2012
Fetching gap sequence in thread 1, gap sequence 1174115-1174214
Sat Nov 17 17:07:50 2012
Fetching gap sequence in thread 1, gap sequence 1174115-1174214
Sat Nov 17 17:08:00 2012
Fetching gap sequence in thread 1, gap sequence 1174115-1174214
Standby crash recovery need archive log for thread 1 sequence 1174115 to continue.
Please verify that primary database is transporting redo logs to the standby database.
Wait timeout: thread 1 sequence 1174115
Standby crash recovery aborted due to error 16016.
Errors in file /oracle/diag/rdbms/b2resnew/work/trace/work_ora_36176058.trc:
ORA-16016: archived log for thread 1 sequence# 1174115 unavailable
Recovery interrupted!
Completed standby crash recovery.
Signalling error 1152 for datafile 1!
ORA-1152 signalled during: ALTER DATABASE ACTIVATE STANDBY DATABASE...
Sat Nov 17 17:08:12 2012
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FINISH
Attempt to do a Terminal Recovery (work)
Media Recovery Start: Managed Standby Recovery (work)
started logmerger process
Sat Nov 17 17:08:12 2012
Managed Standby Recovery not using Real Time Apply
Parallel Media Recovery started with 32 slaves
Media Recovery Waiting for thread 1 sequence 1174115
Fetching gap sequence in thread 1, gap sequence 1174115-1174214
Fetching gap sequence in thread 1, gap sequence 1174115-1174214
RECOVER...FINISH not allowed due to gap
GAP - thread 1 sequence 1174115-1174214
DBID 3179924020 branch 606674959
Recovery interrupted!
Media Recovery failed with error 16171
Errors in file /oracle/diag/rdbms/b2resnew/work/trace/work_pr00_37421192.trc:
ORA-00283: recovery session canceled due to errors
ORA-16171: RECOVER...FINISH not allowed due to gap for thr 1, seq 1174115-1174214
Slave exiting with ORA-283 exception
Errors in file /oracle/diag/rdbms/b2resnew/work/trace/work_pr00_37421192.trc:
ORA-00283: recovery session canceled due to errors
ORA-16171: RECOVER...FINISH not allowed due to gap for thr 1, seq 1174115-1174214
ORA-10877 signalled during: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FINISH ...
SQL> ALTER DATABASE ACTIVATE STANDBY DATABASE;
ALTER DATABASE ACTIVATE STANDBY DATABASE
ERROR at line 1:
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/oradata/ctrl/system01.dbf'
SQL> RECOVER MANAGED STANDBY DATABASE FINISH
ORA-10877: error signaled in parallel recovery slave
SQL>
how open my physical standby in rw?
thanks

CKPT hi.
Do you have Broker enabled?
yes.now i disabled.
+1174115 I do not have+
Sat Nov 17 18:17:13 2012
Completed: Data Guard Broker shutdown
Sat Nov 17 18:17:14 2012
ALTER SYSTEM SET dg_broker_start=FALSE SCOPE=BOTH;
Sat Nov 17 18:17:27 2012
ALTER DATABASE RECOVER managed standby database cancel
ORA-16136 signalled during: ALTER DATABASE RECOVER managed standby database cancel ...
Sat Nov 17 18:17:45 2012
alter database activate standby database
ALTER DATABASE ACTIVATE [PHYSICAL] STANDBY DATABASE (work)
Begin: Standby Redo Logfile archival
End: Standby Redo Logfile archival
Signalling error 1152 for datafile 1!
Beginning standby crash recovery.
Serial Media Recovery started
Managed Standby Recovery starting Real Time Apply
Warning: Datafile 87 (/oradata/data/b2_data75.dbf) is offline during full database recovery and will not be recovered
Media Recovery Waiting for thread 1 sequence 1174115
Fetching gap sequence in thread 1, gap sequence 1174115-1174214
Sat Nov 17 18:17:55 2012
Fetching gap sequence in thread 1, gap sequence 1174115-1174214
Sat Nov 17 18:18:06 2012
Fetching gap sequence in thread 1, gap sequence 1174115-1174214
Sat Nov 17 18:18:16 2012
Fetching gap sequence in thread 1, gap sequence 1174115-1174214
Sat Nov 17 18:18:26 2012
Fetching gap sequence in thread 1, gap sequence 1174115-1174214
Sat Nov 17 18:18:36 2012
Fetching gap sequence in thread 1, gap sequence 1174115-1174214
Sat Nov 17 18:18:47 2012
Fetching gap sequence in thread 1, gap sequence 1174115-1174214
Standby crash recovery need archive log for thread 1 sequence 1174115 to continue.
Please verify that primary database is transporting redo logs to the standby database.
Wait timeout: thread 1 sequence 1174115
Standby crash recovery aborted due to error 16016.
Errors in file /oracle/diag/rdbms/b2resnew/work/trace/work_ora_37617862.trc:
ORA-16016: archived log for thread 1 sequence# 1174115 unavailable
Recovery interrupted!
Completed standby crash recovery.
Signalling error 1152 for datafile 1!
ORA-1152 signalled during: alter database activate standby database...
SQL> select TS#,STATUS,ENABLED,file# from v$datafile order by status;
TS# STATUS ENABLED FILE#
6 ONLINE READ WRITE 66
6 ONLINE READ WRITE 67
6 ONLINE READ WRITE 68
6 ONLINE READ WRITE 69
6 ONLINE READ WRITE 70
6 ONLINE READ WRITE 71
6 ONLINE READ WRITE 72
6 ONLINE READ WRITE 73
6 ONLINE READ WRITE 74
6 ONLINE READ WRITE 75
6 ONLINE READ WRITE 76
6 ONLINE READ WRITE 77
6 ONLINE READ WRITE 78
6 ONLINE READ WRITE 79
6 ONLINE READ WRITE 80
6 ONLINE READ WRITE 81
6 ONLINE READ WRITE 82
6 ONLINE READ WRITE 83
6 ONLINE READ WRITE 84
6 ONLINE READ WRITE 85
6 ONLINE READ WRITE 86
1 ONLINE READ WRITE 2
3 ONLINE READ WRITE 3
4 ONLINE READ WRITE 4
5 ONLINE READ WRITE 5
6 ONLINE READ WRITE 6
7 ONLINE READ WRITE 7
8 ONLINE READ WRITE 8
9 ONLINE READ WRITE 9
6 ONLINE READ WRITE 10
6 ONLINE READ WRITE 11
1 ONLINE READ WRITE 12
6 ONLINE READ WRITE 13
6 ONLINE READ WRITE 14
6 ONLINE READ WRITE 15
1 ONLINE READ WRITE 16
6 ONLINE READ WRITE 17
6 ONLINE READ WRITE 18
6 ONLINE READ WRITE 19
6 ONLINE READ WRITE 20
6 ONLINE READ WRITE 21
6 ONLINE READ WRITE 22
6 ONLINE READ WRITE 23
6 ONLINE READ WRITE 24
6 ONLINE READ WRITE 25
7 ONLINE READ WRITE 26
6 ONLINE READ WRITE 27
10 ONLINE READ WRITE 28
6 ONLINE READ WRITE 29
6 ONLINE READ WRITE 30
6 ONLINE READ WRITE 31
6 ONLINE READ WRITE 32
6 ONLINE READ WRITE 33
6 ONLINE READ WRITE 34
6 ONLINE READ WRITE 35
6 ONLINE READ WRITE 36
6 ONLINE READ WRITE 37
6 ONLINE READ WRITE 38
6 ONLINE READ WRITE 39
6 ONLINE READ WRITE 40
6 ONLINE READ WRITE 41
6 ONLINE READ WRITE 42
6 ONLINE READ WRITE 43
6 ONLINE READ WRITE 44
6 ONLINE READ WRITE 45
6 ONLINE READ WRITE 46
6 ONLINE READ WRITE 47
6 ONLINE READ WRITE 48
6 ONLINE READ WRITE 49
6 ONLINE READ WRITE 50
6 ONLINE READ WRITE 51
6 ONLINE READ WRITE 52
6 ONLINE READ WRITE 53
6 ONLINE READ WRITE 54
6 ONLINE READ WRITE 55
6 ONLINE READ WRITE 56
6 ONLINE READ WRITE 57
6 ONLINE READ WRITE 58
6 ONLINE READ WRITE 59
6 ONLINE READ WRITE 60
6 ONLINE READ WRITE 61
6 ONLINE READ WRITE 62
6 ONLINE READ WRITE 63
6 ONLINE READ WRITE 64
6 ONLINE READ WRITE 65
6 RECOVER READ WRITE 87
6 RECOVER READ WRITE 88
0 SYSTEM READ WRITE 1
88 rows selected.
SQL>
how i can remove "RECOVER" in mount state ?

Similar Messages

How to apply archivelog with gap on standby database

Hi All,
Oracle Database version : 9.2.0.6
Following is my sequence of commands on standby database.
SQL>alter database mount standby database;
SQL> RECOVER AUTOMATIC STANDBY DATABASE UNTIL CHANGE n;
ORA-00279: change 809120216 generated at 07/24/2006 09:55:03 needed for thread
1
ORA-00289: suggestion : D:\ORACLE\ADMIN\TEST\ARCH\TEST001S19921.ARC
ORA-00280: change 809120216 for thread 1 is in sequence #19921
ORA-00278: log file 'D:\ORACLE\ADMIN\TEST\ARCH\TEST001S19921.ARC' no longer
needed for this recovery
ORA-00308: cannot open archived log
'D:\ORACLE\ADMIN\TEST\ARCH\TEST001S19921.ARC'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
I have check the last sequence# on standby database which is 19921. And I have archivelog starting from sequence# 20672 onwards. When I am trying to apply archive log starting from sequence# 20672 , it is searching for 'D:\ORACLE\ADMIN\TEST\ARCH\TEST001S19921.ARC' file and cancel the recovery. Please note that I don't have those missing archive on Primary server as well. So How can I apply the remaining archive log which I do have from 20672 onwards.
I hope I am not creating any confusion.
Thx in advance.

Hi Aijaz,
Thx for your answer. But my scenario is bit complex. I have checked my standby database status which is not running in recovery mode. I have tried to find archive_gap which is 0 on standby server. I am copying all archived log from primary to standby thru the script every 2 hour and appying them on standby. After applying, the script is removing all applied log files from primary as well as standby. So it is something like I have archivelog from 1,2,3,7,8,9,10. So 4,5 and 6 archivelog are missing which is required when I am trying to recover standby database. Also note that I want to apply 7,8,9,10. I will loose some data from those missing archive but I have cold back any way. I don't have those missing archivelog files(4,5 and 6) anywhere at all. So how can I recover standby database. I am using standby just for the backup purpose.
I hope my question is clear now.
Thx in advance
- Mehul

How to perform action when clicking button of NSAlertSHEET

How can I perform an action when people click on "Update"?
NSAlert *alertSheet = [NSAlert alertWithMessageText:@"New update available"defaultButton:@"Update"alternateButton:@"Remenind me later" otherButton:nil informativeTextWithFormat:@"There is a new update available."];
    [alertSheet beginSheetModalForWindow:self.window modalDelegate:nil didEndSelector:nil contextInfo:nil];
I tried this:
(but this doesn't work)
NSAlert *alertSheet = [NSAlert alertWithMessageText:@"New update available"defaultButton:@"Update"alternateButton:@"Remenind me later" otherButton:nil informativeTextWithFormat:@"There is a new update available."];
    [alertSheet beginSheetModalForWindow:self.window modalDelegate:nil didEndSelector:nil contextInfo:nil];
if ([alertSheet runModal] == NSAlertFirstButtonReturn){

Your first step is wrong.
yourInternalFrame.addInternalFrameListener(
     new InternalFrameAdapter(){
public void internalFrameClosing(InternalFrameEvent e){
    // do part
});

How to achieve failover when the master definition site is down ?

I have two Oracle 8i instances in a multi-master async replication environment. Two J2EE application servers connect to each of the Oracle instance respectively. When one of the oracle instance is down, I'd like to have my J2EE application failover to the second Oracle instance automatically without human intervention. I understand I can use OCI driver to allow my J2EE app to connect to the other Oracle instance when the first is down. But here are some questions:
1. If I understand it correctly, there's only one master definition site. Let's say my master definition site sits with the first Oracle instance. If this server is down, the DBA has to go in to config the second Oracle instance to be the master definition site. Can this be done automatically without the DBA ?
2. If the master definition site is down and the DBA is yet to come in, will the second Oracle instance still work ? I do understand the replication won't work, but will normal database read/write work ? What happens between the master definition site down and the master definition site reconfigured ?
3. Are there any low cost third party tools can handle what I wanted ?
Thanks in advance,

To answer your questions.
1. Yes there is only one master def site, it is not important to relocate the master def site, in the event of its failure. The def site is used as a the source for replication definition generation.
2. It depends upon what type of multi-master replication you have implemented. If you are using asynch replication, the site that is up will continue to allow updates and will queue the transactions. When the other site(s) are active again, it will forward the transactions. Note, this can cause untold problems if you have a heavy used system, and narrow bandwidth. If on the other hand you are using synchanous replication, when one site goes down, the other site(s) lock their tables to prevent dml/ddl changes. Then you have to decide whether or not you can wait for the down site to be restored, or break replication to continue operations.
3. Yes, there are a few, one that comes to mind, I believe is Shareplex.

How to perform action when the close button is pressed?

i am using a JInternalFrame and i would like to perform some actions before the internal frame closes when i press the close button on the top right corner of the frame.
i know the first step is:
setDefaultCloseOperation(DO_NOTHING_ON_CLOSE);
what next? what actionlistener shd i use??
thx very much

Your first step is wrong.
yourInternalFrame.addInternalFrameListener(
new InternalFrameAdapter(){
public void internalFrameClosing(InternalFrameEvent e){
// do part
});

How can I visit the performance tab when the target DB is down?

Hi, All:
I wonder if it is possible to visit the performance tab when the target DB is down. I thought it should be possible. But whenever I first click the performance tab, I will be asked to enter the user/passwd for the target db(I have set the preferred credentials).
Furthermore, is it possible to analyze the history sql/performance if the target db is not startup? and how can I do it?
Thanks in advance

I have seen other postings by the same ID and my suggestion is that you have a look at the Enterprise Manager Documentation Library. After that, you can ask questions relating to subjects you cannot solve with the documentations.
http://www.oracle.com/pls/db102/portal.portal_db?selected=21

How to avoid leaving a gap when closing tabs on Firefox 5?

Hello,
I want to disable a new feature on Firefox 5. Or, at least, I don't recall it being a feature on Firefox 4.
When I have various tabs open, and close one of them, they go to the left, leaving a gap to the right that will be filled the time I move the mouse somewhere else.
Being graphical:
Starting from this:
|¨¨a¨¨||¨¨b¨¨||¨¨c¨¨||¨¨d¨¨||¨¨e¨¨|
I close the last two tabs, first "d", then "e", keeping the mouse over the tabs zone:
|¨¨a¨¨||¨¨b¨¨||¨¨c¨¨|_Blank Space_
Then, I move the cursor somewhere else, and then it fills the blank space:
|¨¨1¨¨||¨¨2¨¨||¨¨a¨¨||¨¨b¨¨||¨¨c¨¨|
How can I avoid this gap when I close tabs?
Turning browser.tabs.animate to false did nothing.
Thank you very much :)

Cor-el, when we close the tabs, there's an animation where the remaining tabs grow into the vacated space. I have browser.tabs.animate switched off and would, as a result, have expected the tabs to instantaneously resize, instead of doing an animation that slows things down slightly and which I thought I'd turned off.

How to get the Application perform actions when exits?

How to get the Application perform actions when user clicks on the "X" icon in the top right hand corner?
OR
If i placed an Exit Button.... when actions that i need to use to allow my application to perform a certain action when it exits?
Thanks

frame.addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) {
// do your stuff here
});The WindowListener and WindowEvent can be found in java.awt.event package
//David

My ipod nano, when it enters standby mode, pause the reproduction of music, how do I solve this problem?

My ipod nano, when it enters standby mode, pause the reproduction of music, how do I solve this problem?

This is usually an indication that your headphones are not plugged ALL the way in. The white part of the headset should be flush with the body of the Nano and no silver from the headphone plug should still be seen.
B-rock

Restore/recover after failover to a Logical Standby database

I have a question about how to recover or restore back to my original environment after I failover to my Logical Standby database.
My setup is as follows: Oracle version 11.2.0.3, Non-RAC.
1. A Primary database at one location.
2. A Physical Standby database at a second location.
3. A Logical Standby database at a third location.
All three databases have Flashback Database on
All three databases are configured thru the Data Guard Broker.
All three databases has a Fast Recovery Area.
Suppose I loose my primary database (1) and my Physical Standby database (3) so I Failover to my only remaining database, the Logical Standby database (2).
What type of Databases are let after the this failover?
What are my recover/restore/Instantiate options?
The Data Guard Concepts book on 13.2.2 says how to bring the old Primary in to the Data Guard Configuration as a new Logical Standby database.
How do I get back to the original configuration above, a primary, a Physical, and a Logical Standby without having to re-create some databases?
Will Flashback database thru the Broker or Cloud Control/Grid Control rewind my databases?

Suppose I loose my primary database (1) and my Physical Standby database (3) so I Failover to my only remaining database, the Logical Standby database (2).
What type of Databases are let after the this failover?
What are my recover/restore/Instantiate options? Then forget about your current primary database, its out of network.
AFAIK
Now you will have only Physical standby & logical standby. Now you will perform failover only current standby to primary database.
So now you will have only one primary database with new incarnation, so you have to recreate a new standby database again.
The Data Guard Concepts book on 13.2.2 says how to bring the old Primary in to the Data Guard Configuration as a new Logical Standby database.
How do I get back to the original configuration above, a primary, a Physical, and a Logical Standby without having to re-create some databases?
Will Flashback database thru the Broker or Cloud Control/Grid Control rewind my databases?Check this. But not much aware of Clound control and all. Sorry for that. ;-) I'm sure Uwe/Mseberg can answer this ;-)
http://www.idevelopment.info/data/Oracle/DBA_tips/Data_Guard/DG_49.shtml#Flashing%20Back%20a%20Failed%20Primary%20Database%20into%20a%20Logical%20Standby%20Database

Failover when delay of 1 day.

Hi,
my configuration is as that
4 node RAC 10.2.0.3 -> 2 node RAC physical standby with 1 day lag (no standby log max performance mode).
After extensive studying Oracle doc I'm confused how to do failover in such scenario (delay in applying used).
Should I follow Oracle doc and do:
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FINISH FORCE; --will that apply to the latest arch registered in standby ?
ALTER DATABASE COMMIT TO SWITCHOVER TO PRIMARY;
or as stated in some blogs
alter database recover managed standby database finish skip standby logfile; -- no mention abut skip standby logfile in 10.2 Dataguard Concepts only in 10.1 but people used that.
alter database commit to switchover to primary;
or Should I as in one blog related to delay in apply:
alter database recover managed standby database cancel;
recover automatic standby database until time '_LATEST_TIME_';
alter database activate standby database;
Please advice .
Regards
GregG

Should I follow Oracle doc and do:
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FINISH FORCE; --will that apply to the latest arch registered in standby ?
ALTER DATABASE COMMIT TO SWITCHOVER TO PRIMARY;
or as stated in some blogs
alter database recover managed standby database finish skip standby logfile; -- no mention abut skip standby logfile in 10.2 Dataguard Concepts only in 10.1 but people used that.
alter database commit to switchover to primary;There are many options available, So if there are any pending archives which haven't applied then you can give "ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FINISH", Lets suppose you are using real time apply then of course you can use option of "Uisng standby logfile" .
or Should I as in one blog related to delay in apply:
alter database recover managed standby database cancel;
recover automatic standby database until time '_LATEST_TIME_';
alter database activate standby database;If suppose all the archives are already applied, then there is no point of mentioning "until time", If all the archives are applied, Then go ahead cancel MRP and use command "SQL> alter database activate standby database". That will do.

Performance issues when creating a Report / Query in Discoverer

Hi forum,
Hope you are can help, it involves a performance issues when creating a Report / Query.
I have a Discoverer Report that currently takes less than 5 seconds to run. After I add a condition to bring back Batch Status that = Posted we cancelled the query after reaching 20 minutes as this is way too long. If I remove the condition the query time goes back to less than 5 seconds.
Please see attached the SQL Inspector Plan:
Before Condition
SELECT STATEMENT
SORT GROUP BY
VIEW SYS
SORT GROUP BY
NESTED LOOPS OUTER
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
TABLE ACCESS BY INDEX ROWID GL.GL_CODE_COMBINATIONS
AND-EQUAL
INDEX RANGE SCAN GL.GL_CODE_COMBINATIONS_N2
INDEX RANGE SCAN GL.GL_CODE_COMBINATIONS_N1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES
INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUES_N1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUE_SETS
INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUE_SETS_U1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES_TL
INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUES_TL_U1
INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUE_NORM_HIER_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_LINES
INDEX RANGE SCAN GL.GL_JE_LINES_N1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
TABLE ACCESS BY INDEX ROWID GL.GL_JE_HEADERS
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_DAILY_CONVERSION_TYPES_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_SOURCES_TL
INDEX UNIQUE SCAN GL.GL_JE_SOURCES_TL_U1
INDEX UNIQUE SCAN GL.GL_JE_CATEGORIES_TL_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
INDEX UNIQUE SCAN GL.GL_BUDGET_VERSIONS_U1
INDEX UNIQUE SCAN GL.GL_ENCUMBRANCE_TYPES_U1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
TABLE ACCESS BY INDEX ROWID GL.GL_JE_BATCHES
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
TABLE ACCESS BY INDEX ROWID GL.GL_PERIODS
INDEX RANGE SCAN GL.GL_PERIODS_U1
After Condition
SELECT STATEMENT
SORT GROUP BY
VIEW SYS
SORT GROUP BY
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS
TABLE ACCESS FULL GL.GL_JE_BATCHES
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_HEADERS
INDEX RANGE SCAN GL.GL_JE_HEADERS_N1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
INDEX UNIQUE SCAN GL.GL_ENCUMBRANCE_TYPES_U1
INDEX UNIQUE SCAN GL.GL_DAILY_CONVERSION_TYPES_U1
INDEX UNIQUE SCAN GL.GL_BUDGET_VERSIONS_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_SOURCES_TL
INDEX UNIQUE SCAN GL.GL_JE_SOURCES_TL_U1
INDEX UNIQUE SCAN GL.GL_JE_CATEGORIES_TL_U1
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_LINES
INDEX RANGE SCAN GL.GL_JE_LINES_U1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
TABLE ACCESS BY INDEX ROWID GL.GL_CODE_COMBINATIONS
INDEX UNIQUE SCAN GL.GL_CODE_COMBINATIONS_U1
TABLE ACCESS BY INDEX ROWID GL.GL_PERIODS
INDEX RANGE SCAN GL.GL_PERIODS_U1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES
INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUES_N1
INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUE_NORM_HIER_U1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES_TL
INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUES_TL_U1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUE_SETS
INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUE_SETS_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
Is there anything i can do in Discoverer Desktop / Administration to avoid this problem.
Many thanks,
Lance

Hi Rod,
I've tried the condition (Batch Status||'' = 'Posted') as you suggested, but the qeury time is still over 20 mins. To test i changed it to (Batch Status||'' = 'Unposted') and the query was returned within seconds again.
Ive been doing some more digging and have found the database view that is linked to the Journal Batches folder. See below.
I think the problem is with the column using DECODE. When querying the column in TOAD the value of P is returned. But in discoverer the condition is done on the value Posted. Im not too sure how DECODE works, but think this could be the causing some sort of issue with Full Table Scans. How do we get around this?
Lance
DECODE( JOURNAL_BATCH1.STATUS,
'+', 'Unable to validate or create CTA',
'+*', 'Was unable to validate or create CTA',
'-','Invalid or inactive rounding differences account in journal entry',
'-*', 'Modified invalid or inactive rounding differences account in journal entry',
'<', 'Showing sequence assignment failure',
'<*', 'Was showing sequence assignment failure',
'>', 'Showing cutoff rule violation',
'>*', 'Was showing cutoff rule violation',
'A', 'Journal batch failed funds reservation',
'A*', 'Journal batch previously failed funds reservation',
'AU', 'Showing batch with unopened period',
'B', 'Showing batch control total violation',
'B*', 'Was showing batch control total violation',
'BF', 'Showing batch with frozen or inactive budget',
'BU', 'Showing batch with unopened budget year',
'C', 'Showing unopened reporting period',
'C*', 'Was showing unopened reporting period',
'D', 'Selected for posting to an unopened period',
'D*', 'Was selected for posting to an unopened period',
'E', 'Showing no journal entries for this batch',
'E*', 'Was showing no journal entries for this batch',
'EU', 'Showing batch with unopened encumbrance year',
'F', 'Showing unopened reporting encumbrance year',
'F*', 'Was showing unopened reporting encumbrance year',
'G', 'Showing journal entry with invalid or inactive suspense account',
'G*', 'Was showing journal entry with invalid or inactive suspense account',
'H', 'Showing encumbrance journal entry with invalid or inactive reserve account',
'H*', 'Was showing encumbrance journal entry with invalid or inactive reserve account',
'I', 'In the process of being posted',
'J', 'Showing journal control total violation',
'J*', 'Was showing journal control total violation',
'K', 'Showing unbalanced intercompany journal entry',
'K*', 'Was showing unbalanced intercompany journal entry',
'L', 'Showing unbalanced journal entry by account category',
'L*', 'Was showing unbalanced journal entry by account category',
'M', 'Showing multiple problems preventing posting of batch',
'M*', 'Was showing multiple problems preventing posting of batch',
'N', 'Journal produced error during intercompany balance processing',
'N*', 'Journal produced error during intercompany balance processing',
'O', 'Unable to convert amounts into reporting currency',
'O*', 'Was unable to convert amounts into reporting currency',
'P', 'Posted',
'Q', 'Showing untaxed journal entry',
'Q*', 'Was showing untaxed journal entry',
'R', 'Showing unbalanced encumbrance entry without reserve account',
'R*', 'Was showing unbalanced encumbrance entry without reserve account',
'S', 'Already selected for posting',
'T', 'Showing invalid period and conversion information for this batch',
'T*', 'Was showing invalid period and conversion information for this batch',
'U', 'Unposted',
'V', 'Journal batch is unapproved',
'V*', 'Journal batch was unapproved',
'W', 'Showing an encumbrance journal entry with no encumbrance type',
'W*', 'Was showing an encumbrance journal entry with no encumbrance type',
'X', 'Showing an unbalanced journal entry but suspense not allowed',
'X*', 'Was showing an unbalanced journal entry but suspense not allowed',
'Z', 'Showing invalid journal entry lines or no journal entry lines',
'Z*', 'Was showing invalid journal entry lines or no journal entry lines', NULL ),

How to perform a classic Mac OS search in Tiger

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
In an this post I will describe how to perform a classic Mac OS search and give example results. You may perform the search with or without the spotlight database. This search falls under the smart folder implementation introduced with Tiger. I have done all my testing with Mac OS 10.4.11. I assume this will work with any version of Tiger or Leopard.
The results will be slightly different with a spotlight database on the partition and without a database on the partition. With a database, you will not see Unix hidden files. You may be able to use all of the spotlight special find features. I did not test much with the spotlight special fields. Without a database, using the special features nulls out the search and the "Search for" field seems to give the same result as using the name field.
This search technique was obscured by all the hoopla over spotlight. Authors of Tiger books avoided mentioning the Classic search interface. When I looked in Leopard books I noticed some authors put back information on the Classic search interface.
For testing I created these files
For testing I created a test "z-find" folder on my Macintosh-HD, containing files and folders with various attributes, then copied it over to my Spotless flash drive. This means both searches searched for the same file names.
I put these files on my Macintosh-HD and Spotless partitions.
Here is the list of files:
!http://farm3.static.flickr.com/2122/3746333451_36daa677f8.jpg?v=0!
Here is the list of files again:
.bash-backup-copy-initial-dot-copy.html
.bash-copy-initial-dot/
    bash-backup-inside-bash.html
    ping_command_as_Give.html
bash-backup-copy-invisible-attr.html
bash-backup.html
bash-batChmod.html
bash-battery__yellow__4k.html
bash-copy/
    bash-backup-inside-bash-copy.html
    ping_command-bash-copy.html
bash-copy-invisible-attr/
    ping_command_as_Give.html
bash-folder__green/
    ping_command_as_Give.html
Perform the Classic Mac OS search with a Spotlight database.
{color:red}By Classic Mac OS search I mean a search on the filename and the results shown in list format.{color} How do you get to this interface?
*Click on the Desktop to access the Finder.*
*Click on File then click on Find. (Command-F)*
Pick what folder you wished to search. With Tiger you can click on Others... to select a folder. Click on the plus sign to select the folder you wish to search. Be sure the selected folder in the list is the only one checked. In the first example I picked: /Users/mac/Desktop/iMac/z-find/
{color:purple}The "Search for" field on the first line is used for spotlight. Avoid using this box.{color}
*Click on the double arrow to the right of the first option (Kind). Go down to the name field.*
*Change the 2nd pop down field to Contains.*
*You can now search for the contents of a filename.* I searched for name contains: bash-
To see the Classic display format, click on the three line icon which is located on the upper left of the window (list view). There is a small refresh icon on the lower right of the window.
!http://farm4.static.flickr.com/3485/3240587496_741476de7b.jpg?v=0!
This is the result of the search with a Spotlight database:
bash-backup-copy-invisible-attr.html
bash-backup-inside-bash-copy.html
bash-backup-inside-bash.html
bash-backup.html
bash-batChmod.html
bash-battery_yellow_4k.html    {labeled with the Yellow attribute}
bash-copy    {folder}
bash-copy-invisible-attr    {folder}
bash-folder__green    {folder and labeled with the Green attribute}
ping_command-bash-copy.html
You can create a smart folder to take you directly to the search panel. Just click on the Save icon to the right of the window near the top. For readers of books, you should look under smart folders.
!http://farm4.static.flickr.com/3498/3239759755_d5ebbefe05.jpg?v=0!
There are some downsides. Initially, the search will find both visible and invisible Mac OS files. However, the search seems to get confused between visible and invisible files when you select the visibility option. It seems to get the visible correct when you use visible but when you add invisible things get confused. Sometimes it will find invisible files and sometimes it won't. I used both the Unix invisible files and the Mac OS X visiblity attribute.
In putting the same search in the upper right-hand-corner spotlight search and in the Search for field, I did not get the same results. The spotlight search returned a 182 items while the with Search for field returned 179 items. The Search for field seemed to miss items in the mail boxes. With the Search for search you could display spotlight results in the classic format.
I did a successful search on my fat32 flash drive.
Perform the Classic Mac OS search without the spotlight database.
If you turn off spotlight indexing on a volume and delete the spotlight index, then Mac OS Tiger reverts to the prior Mac OS search facility. In the preferences for spotlight, you let searching continued on the partition.
Here is what I did:
I installed the spotless application.
http://www.fixamac.net/software/spot/
I use spotless to configure spotlight. Click on disabled indexing then click on delete index files.
!http://farm4.static.flickr.com/3527/3239751839_c760c46628.jpg?v=0!
Spotless creates the .Spotlight-V100 directory with the _IndexPolicy.plist and _rules.plist to prevent indexing on the partition.
I performed the search for files containing "bash-" in the name field.
!http://farm4.static.flickr.com/3430/3240587902_171d8d46c3.jpg?v=0!
This is the result of the search without the Spotlight databases:
bash-backup-inside-bash-copy.html
bash-backup.html
bash-batChmod.html
bash-battery_yellow_4k.html    {labeled with the Yellow attribute}
bash-copy    {folder}
bash-folder__green    {folder and labeled with the Green attribute}
ping_command-bash-copy.html
Limitations:
Does not search in Unix hidden folders. That is folders beginning with a period (.) .
Sometimes will find files beginning with a period (.).
Does not find Mac OS invisible files.
Using the special features nulls out the search.
The Search for field seems to give the same result as using the name field.
Related tips:
• More hints by Baltwo
http://www.macosxhints.com/article.php?story=20050501162147222
•Spotlight in Leopard has been enhanced. See these articles for details:
See http://www.pinkmutant.com/articles/Leopard/leospot.html and my mod to Finder's Find at http://discussions.apple.com/message.jspa?messageID=6725932 for what you can change so you can find stuff excluded by the default structure.
• FindAnyFile
"Contrary to Spotlight, it does not use a database but instead uses the file system driver's fast search operations."
http://apps.tempel.org/FindAnyFile/index.html
• Use the terminal find command to list files from multiple directories.
Macintosh-HD -> Applications -> Utilities -> Terminal
mac $ find ~/Desktop/iMac/z-find -iname "*bash-*" -exec ls -dF {} \;
/Users/mac/Desktop/iMac/z-find/.bash-backup-copy-initial-dot-copy.html
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot/
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot/bash-backup-inside-bash.ht ml
/Users/mac/Desktop/iMac/z-find/bash-backup-copy-invisible-attr.html
/Users/mac/Desktop/iMac/z-find/bash-backup.html
/Users/mac/Desktop/iMac/z-find/bash-batChmod.html
/Users/mac/Desktop/iMac/z-find/bash-battery_yellow_4k.html
/Users/mac/Desktop/iMac/z-find/bash-copy/
/Users/mac/Desktop/iMac/z-find/bash-copy/bash-backup-inside-bash-copy.html
/Users/mac/Desktop/iMac/z-find/bash-copy/ping_command-bash-copy.html
/Users/mac/Desktop/iMac/z-find/bash-copy-invisible-attr/
/Users/mac/Desktop/iMac/z-find/bash-folder__green/
mac $
• You can use the Terminal to search the contents of a file.
You need to combine the find command with the grep command. I am searching for the word pdisk where file names containing "bash-" in the directory "/Users/mac/Desktop/iMac/z-find". The symbols {} \; are needed after the word to search. See:
man find
man grep
for cryptic details.
Macintosh-HD -> Applications -> Utilities -> Terminal
mac $ find ~/Desktop/iMac/z-find -iname "*bash-*" -type f -exec grep -bil 'pdisk' {} \;
/Users/mac/Desktop/iMac/z-find/.bash-backup-copy-initial-dot-copy.html
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot/bash-backup-inside-bash.ht ml
/Users/mac/Desktop/iMac/z-find/bash-backup-copy-invisible-attr.html
/Users/mac/Desktop/iMac/z-find/bash-backup.html
/Users/mac/Desktop/iMac/z-find/bash-copy/bash-backup-inside-bash-copy.html
• findfile
"Here’s a simple command-line tool which uses FSCatalogSearch to search for files by name.
usage: findfile -r <volume> <name> "
Here is where to find: findfile.
http://cocoacafe.wordpress.com/2007/06/17/fscatalogsearch/
I am searching file names containing "bash-" in the directory "/Users/mac/Desktop/iMac/z-find".
Macintosh-HD -> Applications -> Utilities -> Terminal
mac $ ~/findfile -r /Volumes/Macintosh-HD/ "bash-" |\
additional input: grep '^/Users/mac/Desktop/iMac/z-find/'
/Users/mac/Desktop/iMac/z-find/.bash-backup-copy-initial-dot-copy.html
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot
/Users/mac/Desktop/iMac/z-find/bash-backup-copy-invisible-attr.html
/Users/mac/Desktop/iMac/z-find/bash-backup.html
/Users/mac/Desktop/iMac/z-find/bash-batChmod.html
/Users/mac/Desktop/iMac/z-find/bash-battery_yellow_4k.html
/Users/mac/Desktop/iMac/z-find/bash-copy
/Users/mac/Desktop/iMac/z-find/bash-copy-invisible-attr
/Users/mac/Desktop/iMac/z-find/bash-folder__green
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot/bash-backup-inside-bash.ht ml
/Users/mac/Desktop/iMac/z-find/bash-copy/bash-backup-inside-bash-copy.html
/Users/mac/Desktop/iMac/z-find/bash-copy/ping_command-bash-copy.html
Robert
This is the 1st version of this tip. It was submitted on July 31,2009 by rccharles.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
In an this post I will describe how to perform a classic Mac OS search and give example results. You may perform the search with or without the spotlight database. This search falls under the smart folder implementation introduced with Tiger. I have done all my testing with Mac OS 10.4.11. I assume this will work with any version of Tiger or Leopard.
The results will be slightly different with a spotlight database on the partition and without a database on the partition. With a database, you will not see Unix hidden files. You may be able to use all of the spotlight special find features. I did not test much with the spotlight special fields. Without a database, using the special features nulls out the search and the "Search for" field seems to give the same result as using the name field.
This search technique was obscured by all the hoopla over spotlight. Authors of Tiger books avoided mentioning the Classic search interface. When I looked in Leopard books I noticed some authors put back information on the Classic search interface.
For testing I created these files
For testing I created a test "z-find" folder on my Macintosh-HD, containing files and folders with various attributes, then copied it over to my Spotless flash drive. This means both searches searched for the same file names.
I put these files on my Macintosh-HD and Spotless partitions.
Here is the list of files:
!http://farm3.static.flickr.com/2122/3746333451_36daa677f8.jpg?v=0!
Here is the list of files again:
.bash-backup-copy-initial-dot-copy.html
.bash-copy-initial-dot/
    bash-backup-inside-bash.html
    ping_command_as_Give.html
bash-backup-copy-invisible-attr.html
bash-backup.html
bash-batChmod.html
bash-battery__yellow__4k.html
bash-copy/
    bash-backup-inside-bash-copy.html
    ping_command-bash-copy.html
bash-copy-invisible-attr/
    ping_command_as_Give.html
bash-folder__green/
    ping_command_as_Give.html
Perform the Classic Mac OS search with a Spotlight database.
{color:red}By Classic Mac OS search I mean a search on the filename and the results shown in list format.{color} How do you get to this interface?
*Click on the Desktop to access the Finder.*
*Click on File then click on Find. (Command-F)*
Pick what folder you wished to search. With Tiger you can click on Others... to select a folder. Click on the plus sign to select the folder you wish to search. Be sure the selected folder in the list is the only one checked. In the first example I picked: /Users/mac/Desktop/iMac/z-find/
{color:purple}The "Search for" field on the first line is used for spotlight. Avoid using this box.{color}
*Click on the double arrow to the right of the first option (Kind). Go down to the name field.*
*Change the 2nd pop down field to Contains.*
*You can now search for the contents of a filename.* I searched for name contains: bash-
To see the Classic display format, click on the three line icon which is located on the upper left of the window (list view). There is a small refresh icon on the lower right of the window.
!http://farm4.static.flickr.com/3485/3240587496_741476de7b.jpg?v=0!
This is the result of the search with a Spotlight database:
bash-backup-copy-invisible-attr.html
bash-backup-inside-bash-copy.html
bash-backup-inside-bash.html
bash-backup.html
bash-batChmod.html
bash-battery_yellow_4k.html    {labeled with the Yellow attribute}
bash-copy    {folder}
bash-copy-invisible-attr    {folder}
bash-folder__green    {folder and labeled with the Green attribute}
ping_command-bash-copy.html
You can create a smart folder to take you directly to the search panel. Just click on the Save icon to the right of the window near the top. For readers of books, you should look under smart folders.
!http://farm4.static.flickr.com/3498/3239759755_d5ebbefe05.jpg?v=0!
There are some downsides. Initially, the search will find both visible and invisible Mac OS files. However, the search seems to get confused between visible and invisible files when you select the visibility option. It seems to get the visible correct when you use visible but when you add invisible things get confused. Sometimes it will find invisible files and sometimes it won't. I used both the Unix invisible files and the Mac OS X visiblity attribute.
In putting the same search in the upper right-hand-corner spotlight search and in the Search for field, I did not get the same results. The spotlight search returned a 182 items while the with Search for field returned 179 items. The Search for field seemed to miss items in the mail boxes. With the Search for search you could display spotlight results in the classic format.
I did a successful search on my fat32 flash drive.
Perform the Classic Mac OS search without the spotlight database.
If you turn off spotlight indexing on a volume and delete the spotlight index, then Mac OS Tiger reverts to the prior Mac OS search facility. In the preferences for spotlight, you let searching continued on the partition.
Here is what I did:
I installed the spotless application.
http://www.fixamac.net/software/spot/
I use spotless to configure spotlight. Click on disabled indexing then click on delete index files.
!http://farm4.static.flickr.com/3527/3239751839_c760c46628.jpg?v=0!
Spotless creates the .Spotlight-V100 directory with the _IndexPolicy.plist and _rules.plist to prevent indexing on the partition.
I performed the search for files containing "bash-" in the name field.
!http://farm4.static.flickr.com/3430/3240587902_171d8d46c3.jpg?v=0!
This is the result of the search without the Spotlight databases:
bash-backup-inside-bash-copy.html
bash-backup.html
bash-batChmod.html
bash-battery_yellow_4k.html    {labeled with the Yellow attribute}
bash-copy    {folder}
bash-folder__green    {folder and labeled with the Green attribute}
ping_command-bash-copy.html
Limitations:
Does not search in Unix hidden folders. That is folders beginning with a period (.) .
Sometimes will find files beginning with a period (.).
Does not find Mac OS invisible files.
Using the special features nulls out the search.
The Search for field seems to give the same result as using the name field.
Related tips:
• More hints by Baltwo
http://www.macosxhints.com/article.php?story=20050501162147222
•Spotlight in Leopard has been enhanced. See these articles for details:
See http://www.pinkmutant.com/articles/Leopard/leospot.html and my mod to Finder's Find at http://discussions.apple.com/message.jspa?messageID=6725932 for what you can change so you can find stuff excluded by the default structure.
• FindAnyFile
"Contrary to Spotlight, it does not use a database but instead uses the file system driver's fast search operations."
http://apps.tempel.org/FindAnyFile/index.html
• Use the terminal find command to list files from multiple directories.
Macintosh-HD -> Applications -> Utilities -> Terminal
mac $ find ~/Desktop/iMac/z-find -iname "*bash-*" -exec ls -dF {} \;
/Users/mac/Desktop/iMac/z-find/.bash-backup-copy-initial-dot-copy.html
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot/
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot/bash-backup-inside-bash.ht ml
/Users/mac/Desktop/iMac/z-find/bash-backup-copy-invisible-attr.html
/Users/mac/Desktop/iMac/z-find/bash-backup.html
/Users/mac/Desktop/iMac/z-find/bash-batChmod.html
/Users/mac/Desktop/iMac/z-find/bash-battery_yellow_4k.html
/Users/mac/Desktop/iMac/z-find/bash-copy/
/Users/mac/Desktop/iMac/z-find/bash-copy/bash-backup-inside-bash-copy.html
/Users/mac/Desktop/iMac/z-find/bash-copy/ping_command-bash-copy.html
/Users/mac/Desktop/iMac/z-find/bash-copy-invisible-attr/
/Users/mac/Desktop/iMac/z-find/bash-folder__green/
mac $
• You can use the Terminal to search the contents of a file.
You need to combine the find command with the grep command. I am searching for the word pdisk where file names containing "bash-" in the directory "/Users/mac/Desktop/iMac/z-find". The symbols {} \; are needed after the word to search. See:
man find
man grep
for cryptic details.
Macintosh-HD -> Applications -> Utilities -> Terminal
mac $ find ~/Desktop/iMac/z-find -iname "*bash-*" -type f -exec grep -bil 'pdisk' {} \;
/Users/mac/Desktop/iMac/z-find/.bash-backup-copy-initial-dot-copy.html
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot/bash-backup-inside-bash.ht ml
/Users/mac/Desktop/iMac/z-find/bash-backup-copy-invisible-attr.html
/Users/mac/Desktop/iMac/z-find/bash-backup.html
/Users/mac/Desktop/iMac/z-find/bash-copy/bash-backup-inside-bash-copy.html
• findfile
"Here’s a simple command-line tool which uses FSCatalogSearch to search for files by name.
usage: findfile -r <volume> <name> "
Here is where to find: findfile.
http://cocoacafe.wordpress.com/2007/06/17/fscatalogsearch/
I am searching file names containing "bash-" in the directory "/Users/mac/Desktop/iMac/z-find".
Macintosh-HD -> Applications -> Utilities -> Terminal
mac $ ~/findfile -r /Volumes/Macintosh-HD/ "bash-" |\
additional input: grep '^/Users/mac/Desktop/iMac/z-find/'
/Users/mac/Desktop/iMac/z-find/.bash-backup-copy-initial-dot-copy.html
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot
/Users/mac/Desktop/iMac/z-find/bash-backup-copy-invisible-attr.html
/Users/mac/Desktop/iMac/z-find/bash-backup.html
/Users/mac/Desktop/iMac/z-find/bash-batChmod.html
/Users/mac/Desktop/iMac/z-find/bash-battery_yellow_4k.html
/Users/mac/Desktop/iMac/z-find/bash-copy
/Users/mac/Desktop/iMac/z-find/bash-copy-invisible-attr
/Users/mac/Desktop/iMac/z-find/bash-folder__green
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot/bash-backup-inside-bash.ht ml
/Users/mac/Desktop/iMac/z-find/bash-copy/bash-backup-inside-bash-copy.html
/Users/mac/Desktop/iMac/z-find/bash-copy/ping_command-bash-copy.html
Robert
This is the 1st version of this tip. It was submitted on July 31,2009 by rccharles.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

HP Officejet Pro 8500 Wireless A909g, CB023A, how to perform full-reset

I own this printer since December 2009, during the first 15 months I had several problems/defects and also repairs and excange units. The problems continue on and in September 2011, in October 2011 and in November 2011 I got excange devices after repair attempts (one device was delivered without any function). The last device worked with one (?) (minor resp. accepted) problem until today resp. June 2014. ...this is the previous history ---> ---> I need sequence to perform full-reset on HP Officejet Pro 8500 Wireless A909g ---> Please send procedure/sequence how to perform a full-reset on this printer - not hard reset nor semi-reset: full-reset !!! Please send this information without unnecessary questions about my problems: My only problem is to own such printer!

Hello AlexBW,
I received your private message and I thank you for writing me back.
One other step that I think may assist us would be to please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Once you have the unit connected directly to a wall outlet, follow the instructions that I provided in the private message.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thank you once again for your time. It has been a pleasure working with you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

How to get header when we use CL_GUI_FRONTEND_SERVICES= GUI_DOWNLOAD

Hi SDN's,
Can u tell me how to get headers when we download data to excel with using (we are using DBF as file type in the following method )
CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
(We can't use GUI_DOWNLOAD)
Thanks in advance..
BR

Hi,
I m giving u a bdc code i hope ur prob ll be solved.
*& Report ZDTK_BDC_LT01
*& PROGRAME TITLE : LT01
*& AUTHOR         : D TARUN KUMAR
*& MM CONSULTANT : Mr. MRINMOYE CHAKRABORTY
*& REQUEST NO.    : RD1K901995
*& TRANSACTION ID : ZLT01
*& PACKAGE        : ZTARUN
*& DESCRIPTION : BDC REPORT TO UPLOAD INITIAL STOCK POSTING AND
*&               STORAGE BINS THROUGH LT01.
REPORT ZDTK_BDC_LT01
       no standard page heading line-size 255.
TYPE-POOLS: TRUXS.
STRUCTURE DECLARATION
TYPES : BEGIN OF TY_UPLOAD,
                 LGNUM(3),
                 BETYP(1),
                 BENUM(10),
                BWLVS(3),
                 MATNR(18),
                BISMT(18),
                 ANFME(16),
                WERKS(4),
                LGORT(4),
                 CHARG(10),
                LETYP(10),
                VLTYP(3),
                VLBER(3),
                VLPLA(10),
                VLQNR(10),
                 NLTYP(3),
                NLBER(3),
                 NLPLA(10),
                NLQNR(10),
          END OF TY_UPLOAD.
INTERNALTABLE & WORKAREA DECLARATION
DATA : T_UPLOAD TYPE STANDARD TABLE OF TY_UPLOAD,
       T_BDCDATA TYPE STANDARD TABLE OF BDCDATA,
       T_BDCMSGCOLL TYPE STANDARD TABLE OF BDCMSGCOLL,
       W_UPLOAD TYPE TY_UPLOAD,
       W_BDCDATA TYPE BDCDATA,
       W_BDCMSGCOLL TYPE BDCMSGCOLL,
GLOBLE DECLARATION
       G_FLNAME TYPE STRING,
       G_MESSAGE(70) TYPE C,
       IT_RAW TYPE TRUXS_T_TEXT_DATA,
GLOBLE DECLARATION
       WA_OPT TYPE CTU_PARAMS.
       WA_OPT-UPDMODE = 'A'.
       WA_OPT-DEFSIZE = 'X'.
       WA_OPT-DISMODE = 'A'.
SLECTION SCREEN DECLARATION
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 2.
PARAMETER : P_FILE LIKE RLGRAP-FILENAME OBLIGATORY.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN : END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
PERFORM GET_FILENAME.
START-OF-SELECTION.
PERFORM UPLOAD_DATA.
*PERFORM GET_FINAL.
*PERFORM GET_MIGO.
PERFORM SESSION.
*PERFORM TEST.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR W_BDCDATA.
W_BDCDATA-PROGRAM = PROGRAM.
W_BDCDATA-DYNPRO   = DYNPRO.
W_BDCDATA-DYNBEGIN = 'X'.
APPEND W_BDCDATA TO T_BDCDATA.
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
    CLEAR W_BDCDATA.
    W_BDCDATA-FNAM = FNAM.
    W_BDCDATA-FVAL = FVAL.
    APPEND W_BDCDATA TO T_BDCDATA.
ENDIF.
ENDFORM.
*&      Form GET_FILENAME
      TEXT
FORM GET_FILENAME .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
   PROGRAM_NAME        = SYST-CPROG
   DYNPRO_NUMBER       = SYST-DYNNR
   FIELD_NAME          = 'P_FILE'
IMPORTING
   FILE_NAME           = P_FILE
ENDFORM.                    " GET_FILENAME
*&      Form UPLOAD_DATA
      text
form UPLOAD_DATA .
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR          =
    I_LINE_HEADER              = 'X'
    I_TAB_RAW_DATA             = IT_RAW
    I_FILENAME                 = P_FILE      "WORK TABLE
TABLES
    I_TAB_CONVERTED_DATA       = T_UPLOAD[]    "ACTUAL DATA
EXCEPTIONS
   CONVERSION_FAILED          = 1
   OTHERS                     = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    " UPLOAD_DATA
*&      Form SESSION
      text
FORM SESSION .
*sort t_upload by bismt.
LOOP AT T_UPLOAD INTO W_UPLOAD.
REFRESH T_BDCDATA.
*CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
   input         = W_UPLOAD-CHARG
IMPORTING
OUTPUT        = W_UPLOAD-CHARG .
*CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
   input         = W_UPLOAD-VLBER
IMPORTING
OUTPUT        = W_UPLOAD-VLBER .
*CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
   input         = W_UPLOAD-NLTYP
IMPORTING
OUTPUT        = W_UPLOAD-NLTYP .
*CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
   input         = W_UPLOAD-NLBER
IMPORTING
OUTPUT        = W_UPLOAD-NLBER .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    input         = W_UPLOAD-CHARG
IMPORTING
   OUTPUT        = W_UPLOAD-CHARG .
DATA : BWLVS(3),
       LGORT(4),
       WERKS(4),
       CHARG(10),
       LETYP(10),
       VLTYP(3),
       VLBER(3),
       VLPLA(10),
       VLQNR(10),
       NLTYP(3),
       NLBER(3),
       NLQNR(10).
DATA : W_MATNR(18).
*SELECT SINGLE MATNR FROM MARA INTO W_MATNR
                  WHERE BISMT = W_UPLOAD-BISMT.
BWLVS = '999'.
LGORT = '3500'.
WERKS = '1030'.
LETYP = 'E1'.
VLTYP = '998'.
VLBER = '001'.
VLPLA = 'AUFNAHME'.
NLTYP = '354'. "(packaging material)
*NLTYP = '353'. "(spareparts material)
NLBER = '001'.
*include bdcrecx1.
*start-of-selection.
*perform open_group.
perform bdc_dynpro      using 'SAPML03T' '0101'.
perform bdc_field       using 'BDC_CURSOR'
                              'LTAP-CHARG'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LTAK-LGNUM'
                              W_UPLOAD-LGNUM. "'350'.
perform bdc_field       using 'LTAK-BENUM'
                              W_UPLOAD-BENUM. "'1000000000'.
perform bdc_field       using 'LTAK-BETYP'
                              W_UPLOAD-BETYP. "'P'.
perform bdc_field       using 'LTAK-BWLVS' BWLVS.    "'999'.
perform bdc_field       using 'LTAP-MATNR'
                              W_upload-MATNR.    "'40000009'.
perform bdc_field       using 'RL03T-ANFME'
                              W_UPLOAD-ANFME.    "'1,000'.
perform bdc_field       using 'LTAP-WERKS' WERKS.    "'1030'.
perform bdc_field       using 'LTAP-CHARG'
                              w_upload-charg.
perform bdc_dynpro      using 'SAPML03T' '0102'.
perform bdc_field       using 'BDC_CURSOR'
                              'LTAP-NLPLA'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RL03T-ANFME'
                              W_UPLOAD-ANFME.    "'1,000'.
*perform bdc_field       using 'LTAP-ALTME'
                             'KG'.
perform bdc_field       using 'LTAP-LETYP' LETYP.    "'E1'.
*perform bdc_field       using 'LTAP-CHARG' W_UPLOAD-CHARG.    "'0000000101'.
perform bdc_field       using 'LTAP-VLTYP' VLTYP.    "'998'.
perform bdc_field       using 'LTAP-VLBER' VLBER.    "'001'.
perform bdc_field       using 'LTAP-VLPLA' VLPLA.    "'AUFNAHME'.
perform bdc_field       using 'LTAP-NLTYP'
                               W_UPLOAD-NLTYP.       "'351'.
perform bdc_field       using 'LTAP-NLBER' NLBER.    "'001'.
perform bdc_field       using 'LTAP-NLPLA'
                              W_UPLOAD-NLPLA.    "'01 00 01'.
*perform bdc_transaction using 'LT01'.
*perform close_group.
CALL TRANSACTION 'LT01' USING T_BDCDATA
                        MODE 'A'
                      UPDATE 'A'
                        OPTIONS FROM WA_OPT
     MESSAGES INTO T_BDCMSGCOLL.
IF SY-SUBRC <> 0.
READ TABLE T_BDCMSGCOLL INTO W_BDCMSGCOLL INDEX 1.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        ID        = SY-MSGID
        LANG      = 'EN'
        NO        = SY-MSGNO
        V1        = SY-MSGV1
        V2        = SY-MSGV2
        V3        = SY-MSGV3
        V4        = SY-MSGV4
      IMPORTING
        MSG       = G_MESSAGE
      EXCEPTIONS
        NOT_FOUND = 1
        OTHERS    = 2.
    IF SY-SUBRC = 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      WRITE : / W_upload-matnr ,'-----' , G_MESSAGE.
      REFRESH T_BDCMSGCOLL.
    ENDIF.
    ENDIF.
*clear : w_matnr, w_upload.
ENDLOOP.
ENDFORM.                    " SESSION

How to Perform Failover When GAP on Standby

Similar Messages

Maybe you are looking for