How to perform this action..

am having a condition in where clause like :-
"and decode(si1.common_cat_id,4,si1.site_id,1, si1.site_id) = td.site_id(+)"
now my query is running with condition but not giving the desired results..
My requirement is like :-
if si1.common_cat id = 4/1 then si1.site_id = td.site_id(+) else this condition sould not make any diffrence to my query..
Any suggestions??
Thanks
Kapil

OK. Great.
:"else this condition should not make any diffrence to my query"?
So, you have two queries.
one query has following conditions (in addition to other conditions):
AND si1.common_cat id IN (4,1)
AND si1.site_id = td.site_id(+)
the second query does not have these two conditions.
Is this what you mean by "else this condition should not make any diffrence to my query"?
null

Similar Messages

Getting this error while opening a folder : This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel

Hi,
While trying to open a folder on my Windows 7 Home Premium, an error comes "This file does not have a program associated with it for performing this
action. Please install a program or, if one is already installed, create an association in the Default Programs control panel." I tried searching on the net but did not get great support for the issue when it happens with folder opening.

Hi Nikunj Shah,
First, I suggest you download
Microsoft Safety Scanner or
Malicious Software Removal Tool to run a full scan.
The error messages here seems to be caused by the corrupted registries, which related with the folder association.
You may take a try to merge the following registry settings to reset the folder association, before that, remember to backup your registry settings first:
How to back up and restore the registry in Windows
Copy and paste the following commands into Notepad, and save it to a .reg file:
=================
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Folder]
"ContentViewModeLayoutPatternForBrowse"="delta"
"ContentViewModeForBrowse"="prop:~System.ItemNameDisplay;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;~System.LayoutPattern.PlaceHolder;System.DateModified"
"ContentViewModeLayoutPatternForSearch"="alpha"
"ContentViewModeForSearch"="prop:~System.ItemNameDisplay;System.DateModified;~System.ItemFolderPathDisplay"
@="Folder"
"EditFlags"=hex:d2,03,00,00
"FullDetails"="prop:System.PropGroup.Description;System.ItemNameDisplay;System.ItemTypeText;System.Size"
"NoRecentDocs"=""
"ThumbnailCutoff"=dword:00000000
"TileInfo"="prop:System.Title;System.ItemTypeText"
[HKEY_CLASSES_ROOT\Folder\DefaultIcon]
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,00,68,00,\
65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\explore]
"MultiSelectModel"="Document"
"ProgrammaticAccessOnly"=""
"LaunchExplorerFlags"=dword:00000018
[HKEY_CLASSES_ROOT\Folder\shell\explore\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\open]
"MultiSelectModel"="Document"
[HKEY_CLASSES_ROOT\Folder\shell\open\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,45,00,78,00,70,00,6c,00,6f,00,72,00,65,00,72,00,2e,00,65,00,78,00,\
65,00,00,00
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess]
"MUIVerb"="@shell32.dll,-8518"
"MultiSelectModel"="Document"
"Extended"=""
"LaunchExplorerFlags"=dword:00000003
"ExplorerHost"="{ceff45ee-c862-41de-aee2-a022c81eda92}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewprocess\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow]
"MUIVerb"="@shell32.dll,-8517"
"MultiSelectModel"="Document"
"OnlyInBrowserWindow"=""
"LaunchExplorerFlags"=dword:00000001
[HKEY_CLASSES_ROOT\Folder\shell\opennewwindow\command]
"DelegateExecute"="{11dbb47c-a525-400b-9e80-a54615a090c0}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\BriefcaseMenu]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Library Location]
@="{3dad6c5d-2167-4cae-9914-f99e41c12cfa}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers\Offline Files]
@="{474C98EE-CF3D-41f5-80E3-4AAB0AB04301}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\DragDropHandlers\{BD472F60-27FA-11cf-B8B4-444553540000}]
@=""
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\BriefcasePage]
@="{85BBD920-42A0-1069-A2E4-08002B30309D}"
[HKEY_CLASSES_ROOT\Folder\ShellEx\PropertySheetHandlers\Offline Files]
@="{7EFA68C6-086B-43e1-A2D2-55A113531240}"
[-HKEY_CLASSES_ROOT\Folder\ShellNew]
[HKEY_CLASSES_ROOT\Folder\ShellNew]
"Directory"=""
"IconPath"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,\
74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,\
00,68,00,65,00,6c,00,6c,00,33,00,32,00,2e,00,64,00,6c,00,6c,00,2c,00,33,00,\
00,00
"ItemName"="@shell32.dll,-30396"
"MenuText"="@shell32.dll,-30317"
"NonLFNFileSpec"="@shell32.dll,-30319"
[HKEY_CLASSES_ROOT\Folder\ShellNew\Config]
"AllDrives"=""
"IsFolder"=""
"NoExtension"=""
==================
Once done, right-click the REG file and choose Merge. Alternately, you can open the Registry Editor and then using the
Import option from the File menu, to merge the REG file contents.
Let me know if you need any further help.
Best regards
Michael Shao
TechNet Community Support

Root cause of error " Access denied. You do not have permission to perform this action or access this resource" - workflow - SharePoint 2013

Good evening, technet community
I hope you are doing well.
When configuring my SharePoint workflow, I encounter the problem below:
Problem Description:
Let's say my domain is: test.com, my group user is: test\group , my user is: test\user1
Except an admin account with full control at both "Web Application" and "Site Collection", all others account all have problem when creating a list item. After creating a list item, the workflow status is "cancelled" immediately
with the following message:
RequestorId: 262a35e4-99f4-40f0-929b-5d04b415f147. Details: System.ApplicationException: HTTP 401 {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["10"],"SPRequestGuid":["262a35e4-99f4-40f0-929b-5d04b415f147"],"request-id":["262a35e4-99f4-40f0-929b-5d04b415f147"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Thu, 06 Nov 2014 12:14:28 GMT"],"Server":["Microsoft-IIS\/7.5"],"WWW-Authenticate":["NTLM"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}
{"error":{"code":"-2147024891, System.UnauthorizedAccessException","message":{"lang":"en-US","value":"Access denied. You do not have permission to perform
this action or access this resource."}}} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor,
BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
- The workflow is still fail even I assign "full control" to my users group "test\group" – at Site Collection level.
Surprisingly, I have successfully found a solution for this error message. However, I still have some points that I do not clearly understand. Let's start with my solution first.
Solution:
*** i. Assign permission policy at Web Application level – Central Admin site ***
1. Central Administration ==> Application management
==> Manage Web application
2. Go to "permission policy", then create a new permission level. This permission level contains all "edit item" permission.
3. Select "user policy", then I assign it directly to my user account: test\user1.
*** ii. Assign "edit item" permission at Site Collection level ***
1. Site Setting ==> Site permission
2. Assign "Edit" permission to my test\group.
(Actually I removed all permissions of my user group at Site Collection level. It seem my group has inherited permission from Web Application level, is that correct? )
*** iii. Create a new list item and workflow runs ……. ***
==> My question is:
1. Why I cannot assign permission to my users group - "test\group" -
at "Web Application" level? Instead I have to assign permission policy for each users, one by one?
2. Could you please let me know how to collect full detail error message of workflow status?
Thank you very much! Have a nice weekend.

Thank you for your very detail response.
Point 1: Yes my 2 service: user profile & profile sync service are running. I performed "full synchronization" as well. Actually i've tried 3 another action plans before coming up with the solution i posted:
*** Actions completed ***
1. Activate the feature: workflow can use app permissions.
Site actions > Site Settings > Site features >activate the feature below:
Workflows can use app permissions
2.
Refresh trusted security token services metadata feed
Get-SPTimerJob
"RefreshMetadataFeed"
| Start-SPTimerJob
- then restart the machine.
3. Start full user profile synchronization.
Point 2:
- Yes my user had Edit permission at workflow task list + list affected by workflow.
I have just remove all permissions of my user at "Site Collection" level. However, when i show my user permissions at my workflow task list and my users still have "Edit" Permission ( assigned at Web Application level. These permissions
still exist even after my workflow task list stop inheriting permission).
==> the problems probably belongs to "permission" at "Site Collection level". It seems "permission level at my Site Collection does not work". All users accounts are also suffer from the same issues except farm admin account
( which has full control at Web Application level).
I would appreciate if your guys can guide me how to make "permission" at my "Site Collection level" work again?
Thank you very much.

Can not access CRM from outside the office network - Access denied You do not have sufficient access rights or privileges to perform this action.

Hi,
I can not access CRM from outside the office network - Access denied You do not have sufficient access rights or privileges to perform this action. I can access CRM with same user id and password from our office inside the network. I can get
the page to give login details once I have login details I got below error. Please help me to solve this issue. It was working before.
Access denied You do not have sufficient access rights or privileges to perform this action.
Regards,
Noushad
[email protected]

On Premise system Configured with AD FS server for claims-based authentication you need to update your host file with server url to access it from outside office network.
Refer
this on how to update host file.
Regards, Saad

You cannot perform this action in modification/enhancement mode

Hi,
I want to delete an interface (IF_EX* --> in the sap namespace) an the following message appears:
"You cannot perform this action in modification/enhancement mode" (Message Class OO, Message Number 401)
The interface was created by myself in a SAP development class / package.
I think the problem is, that the system is trying to delete the interface by using the modification assistant.
Regards,
Hendrik
BTW: It is a customer installation, not a SAP internal development system

Hi
How did u create an interface with name beginning with IF_EX*, the standard interfaces for BADI should have a name like that.
If you've create a custom interface it should be called Z*.
Max

(1) Is there any way that I can get the transition menu to remain on the screen. I select a transition, drag it to the timeline and after I click done I have to start the process all over to perform this action on the next transition. I have premiere elem

(1) Is there any way that I can get the transition menu to remain on the screen. I select a transition, drag it to the timeline and after I click done I have to start the process all over to perform this action on the next transition. I have premiere elements 12. In older version the menu would stay on the screen.
(2) In pan and zoom how can start zoom on a photo in the original picture and zoom in and the next picture zoom out and the next photo pan from right to left and the next photo pan left to right.
Thanks
Sam

TidyCup
What computer operating system is your Premiere Elements 12 running on? If you have not already, be sure to update 12 to 12.1, using an opened project's Help Menu/Update.
But to the immediate questions, assuming Windows 7, 8, or 8.1 64 bit....
1. No, it is what it is. But, are you applying the same transition each time? If so, then highlight/select all the clips involved (all at one time), then Timeline Menu/Apply Default Transition will do just that for the highlighted/selected clips.
To highlight/select more than one clip at a time, hold down the Shift key of the computer main keyboard and then click on each clip that you want in the group selection
or
with your mouse cursor draw a rectangle around the clips that you want to select
2. Are you using the Premiere Elements 12/12.1 Expert workspace Pan and Zoom Tool? Or the pan or zoom presets under fx Effects/Presets/? With those you can do pan or zoom, not pan and zoom.
Or, are you in the Elements Organizer 12 Slideshow Editor using the pan and zoom effect there? Or, are you using keyframing the Motion Scale property for zoom and the Motion Position property for pan?
Are you asking about photos with landscape or portrait orientation?
The pan and zoom tool does one photo at a time.
Have you read the Adobe documentation on the Pan and Zoom Tool?
http://help.adobe.com/en_US/premiereelements/using/WSeffff8bffc802084-494411db12fd35452dd- 8000.html
Please review and clarify and then we can get into greater details on this.
Thanks.
ATR

I keep getting "You need permission to perform this action"

I keep getting "You need permission to perform this action" when trying to write to a 1TB FAT32 drive attached and shared properly
I am having exactly the same problem with with the permission blocker on all my computers. I also have full owner/admin (whatever you want to call full ownership rights) for my 2 PCs and 1 laptop. All are able to connect to the internet and use and extract files off of the 1T external hard drive (which is connected into the router as a network drive with a USB cable).
But... When I attempt to write "TO" the drive, that..is when the retarded 'no permission box' comes up.
I have tried differant users, matching names and passwords to the accessing computer and with users being members of the admin group with read and write access but no luck.
All of the linksys support only gives XP examples. i am running 64bit windows 7
Either exactly the same thing, or something very similar was happening when I 1st hooked up this router almost a year ago. The tech guy over the phone from linksys fixed it by installing a patch the same way they would do a hard install of the firmware ( I'm guessing it was an early version of a win7 patch). Hmm... Strange that there are postings of this problem I am once again facing, BUT... NO solution posted. Curious; I deffinately would have thought this problem would have by now, after all this time, been posted on the FAQ with a simple fix. Obviously my findings for a solution are MUCH less than expected.
From: 1st time dissapointed in linksys.
>(
Solved!
Go to Solution.

Woo Hoo! I have found the solution to this problem on my own after MANY, MANY hours with tech support from Symantic(for Norton360), Cisco Linksys(for the router), and Network Magic (for the software that comes with the Linksys wireless router). Symantic was only able to uninstall norton and reinstall it and said there's nothing wrong with their software and that there's nothing more they can do.
Network Magic basically did and said the same.
And... Last but not least, Cisco. Cisco Linksys Basically did the same as the others for the firmware but, they then came up with the bright conclution that it must be a defective unit and they will send me a new one.
Well... That was not good enough for me; all of my equiptment (including the router) has been working great since the 1st setup about a year ago.
Well... Here's the way I fixed it:
Once the network drive is mapped properly, go into 'computer', right click on your network drive, choose properties, open the security tab, click the edit button, and there you go. Now you should see the account that keeps telling you the no permission from it. If it is there as it should be, click on that account to highlight it and then pick the permissions you whish to have. Click apply and ok. You should now be able to edit, add, remove, etc. your files now.
My only problem with this is: Where did this account come from and why did it default without editing permissions, AND MORE IMPORTANTLY (you'll find out if you try to do this) WHY CAN I NOT REMOVE THIS ACCOUNT. When/If I find out the answers to these final questions, I will post it here. So, if you are iterested in this situation, check back. I'm deturmined to get to the bottom of this.
For now, I'm gong to let Cisco send me the new unit because this mysterious new account may be a hacker that has entered our machines through the router somehow. If this is the case, my theory for how this can happen is: all linksys units come default with easy access with a user/pass as admin/admin. I would have to strongly suggest that you go into your router cofiguration under the administrations tab; personalize the router password AND under the storage tab; in the 'User Management' section, click on the 'Modify' button and personalize the admin password(make sure to write down your new passwords and what they goto

Every time I update or repair in the control panel it comes up with a error message like, this file does not have a program associated with it for performing this action, please install a program if it is installed create an association to the default pro

EVERYTIME I UPDATE SOFTWARE OR GO INTO THE CONTROL PANEL TO ITUNES TO REPAIR OR CHANGE IT GIVES ME AN ERROR MESSAGE
THIS FILE DOES NOT HAVE A PROGRAM ASSOCIATED WITH IT FOR PERFORMING THIS ACTION. PLEASE INSTALL A PROGRAM, IF IT IS INSTALLED CREATE AN ASSOCIATION TO THE DEFAULT PROGRAMS CONTROL PANEL

STOP SHOUTING! Or at the very least, get the CAPS lock key fixed.
Remove iTunes.
Download and install the current version of iTunes from http://www.apple.com/itunes/download

Tying to install itunes and I get error message "This file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel. Help

am tTying to install itunes and I get error message "This file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel. Can anyone help me?

Hi,
Here is a similar thread for your reference:
There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel
http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/036e3cf6-bff7-4ef2-bd0a-555cd2399ad4
Hope this helps
Vincent Wang
TechNet Community Support

ITunes installation error: does not have program associated with it for performing this action

Repeated tries to install iTunes continues to fail. Installing on Acer laptop using Windows 7.
Error: does not have program associated with it for performing this action
We have done the following: open Default programs, clicked associate a file type, clicked on change program button and selected a program to open with and clicked OK/enter.
The installation continues. we get to the finish window; click finish.
Next error: iTunes has been installed incorrectly.
So, what do we do to get iTunes working?
Thank you.

Hi normeagle,
Welcome to Apple Support Communities.
You may find this article helpful for troubleshooting your iTunes installation:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Best,
Jeremy

You don't have Add and Customize Pages permissions required to perform this action - but i do!

Hello.
I am having a similar problem to the one described by this post here:
http://kiruthik.com/2010/10/05/YouDontHaveAddAndCustomizePagesPermissionsRequiredToPerformThisAction.aspx
However, his resolution of changing web.config under wwwroot did not fix my issue.
Here is the situation on a recently upgraded SP2010.
1) Create a document library. Set the document template to "basic page"
2) give a user full control on the document library.
3) Go, under that users credentials, to the document library and create a new document.
4) Name the document whatever and hit create
5) a page is displayed which says the following: "Web Part Error:
A Web Part or Web Form Control on this Page cannot be displayed or imported. You don't have Add and Customize Pages permissions required to perform this action."
6) Become confused as giving someone "full control" on the library should obviously inherit the permissions to when they create a document and try and edit it.
If i give the user "full control" on the entire site (site actions -> site permissions), then the document pops open an editor which would allow you to add content to the basic page. Obviously, i do not want to give users full control to the
entire site :)
Giving the user "Add and Customize Pages" permissions on the entire SITE allows them to edit get the popup to edit the file, but this is not desireable either since then they could "Add, change, or delete HTML pages or Web Part pages,
and edit the Web site using a Windows SharePoint Services-compatible editor.". I do not want them to edit any web pages, i just want them to edit a particular lists webpage!
Things i have tried:
- Set the permissions on the "MSContentEditor" webpart to have the user have full control of the web part.
- set the permissions on ALL the web parts to have the user have full control (permissions on the web parts list)
- Edited web.config to add a line to mark "contentEditorWebPart" as safe, and then restarted IIS.
- Recreated test lists and was able to duplicate the behaviour
So I am wondering, is this a sharepoint bug or what? Should a web part not inherit the permissions of the list it is working in? if not, what are the exact items i need to set permissions on to get this webpart to display correctly?
Setting global site permissions is not an option.
Another workaround is to make a "wiki page library" which allows you to copy and paste text into a static page, and also edit that text. I can move all the content over to a "wiki page library", and thats what i probably will end up doing
in the end, but its annoying because there is alot of content to move, and it all has to be done by hand as you cannot upload documents to a wiki afaik. Also the wiki uses a different editor, its inline instead of a popup in IE which is probably why it is
working.
This may not be a bug and could be a simple permissions problem or something else, but i have been looking at this for hours and it doesnt make any sense to me.
Any help appreciated thanks!

Hi,
Yes, you must have “Add and Customize Pages” permission
from site level to perform this action, the permission is not in list permission level.
You can add a new permission level which only includes “Add and Customize Pages” permission, and then create new SharePoint group with this permission
level.
Add the users into the SharePoint group and these users will get the “Add and Customize Pages” permission
from site level.(site permissions)
Additionally to add/edit page, the users also need the permission level “Contributor” in list permission level.
(you should know when you grant the full control to the users in list permission level, the users won’t get the permission from site level)
If you need further help, please let me know.
Hope this helps
Thanks!
Stanfford
Everything will be fine.

Powershell shortcut gives"this file does not have a program associated with it for performing this action"

Hi,
We have a server where powershell gives an error. The shortcut or the context menu for start button (replaced cmd in context menu) gives an error saying "this file does not have a program associated with it for performing this action".
In some events, like going to C:\ProgramData\Microsoft\Windows\Start Menu\Programs\System Tools\Windows PowerShell.lnk and opening it results in bupkus. Nothing happens.
Browsing to C:\Windows\system32\WindowsPowerShell\v1.0\ and running powershell.exe directly or opening cmd.exe and typing powershell <enter> runs powershell as it should.
What gives?
This posting is provided "AS IS" with no warranties or guarantees and confers no rights

Hi,
I'd probably try asking here:
https://social.technet.microsoft.com/Forums/en-us/home?forum=winserver8gen&filter=alltypes&sort=lastpostdesc
This is more of an OS issue than a PowerShell issue, IMHO.
Good luck.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

This file does not have a program associated with it for performing this action

hi
whenever i install adobe reader in my system it change my all program to adobe reader nd can't open any application.. i mean internet explorer change in adobe reader, C++, microsoft office every application...why its happened....
and even i can't open pdf files on my system it shows a erroe the file does not have a program associated with it to perform this action.. please create a association in control panel

This's the message showing!!

TS3989 Mssage when opening Photo Stream on-"This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel" Help!!!

Mssage when opening Photo Stream on-"This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel" Help!!!

You are posting in the "icloud on my mac" forum, but your profile mentions Windows. If using a mac, you need to have iphoto or aperture installed in order to receive new photos via photo stream. If using windows, try posting in the iCloud on a PC forum. You'll get better help there.
https://discussions.apple.com/community/icloud/icloud_on_my_pc

When running setup, I get"This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel.

whe I try to install Firefox 4.0.1, I get a Red X message. ""This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel. Is there a fix?

I Did that. When I try to install, I get the same message. I have come to believe this is a windows 7 or IE 9 problem. I also have active X problems that I can not resolve. I can not open Gmail also

How to perform this action..

Similar Messages

Maybe you are looking for