How to place component underneath (opposite side) a large through hole component?

I have a large through hole component which moves everytime I try to place a component underneath it...on the opposite side of the board! How do I stop this 'Auto-move' function, or, how do I get change the way Ultisim recognizes this component?
Solved!
Go to Solution.

Hi,
The movement is happeing because of an option called Part shoving. To disable this, go to Design >> Part shoving. If this option is unchecked, the part should not move. You can also lock the part by right-clicking on in and selecting lock. This will allow you to place the part on the other side of the board.
Hope this helps.
Regards,
Tayyab R,
National Instruments.

Similar Messages

How do you create a part that has two through holes with a single net connecting to both.

I attempted to create a part that contained 2 through holes with a copper strip between them so they would connect to a single net, but one of the holes (pin 2) gets rejected by Ultiboard as an unconnected entitiy. Is there a way to define the second hole (pin 2) in such a way as to mitigate the problem?
Thanks, Tod
Solved!
Go to Solution.

Hi
It is quite simple to do so:
when making the footprint, you just put your two TH pins where you need them. name them 1 and 2.
Then in Multisim, when making a new component with the component wizzard,in step 2 make a 1-pin component, and select your desired footprint(which has two pins).
thenin step 3, make/choose your 1-pin symbol.
In step 5 you can map the footprint to the symbol , just use both footprint pins for the same symbol pin.
When using it in your schematic, you'll see one pin, in the layout, there will be two pins connected together..
Good luck
stressed user..

How to place two different indesign documents side by side on my desktop in order to copy and paste images and text from one to the other?

How to place two different indesign documents side by side on my desktop in order to copy and paste images and text from one to the other?

Or choose Window > Arrange > Tile
And, you of course can copy/paste without tiling.

How to place a JPanel at the center of another JPanel?

Can anyone tell me how to place a JPanel inside another JPanel? The first JPanel consists of three JPanels each consisting of a label&textfield and are placed using BoxLayout. The second JPanel is a big blank screen. So, i would like to put the first JPanel at the center of second JPanel(horizontally & vertically). The problem is that i don't have any other component. So,if i try to use FlowLayout, i am able to put it at the center(horizontally, not vertically) only on the top edge. I tried to use BoxLayout. But, i couldn't(as i don't have any other elements). I tried to create some blank elements. But, they are messing up the elements of my JPanel. Any cluesssssssss??????????

import java.awt.*;
import javax.swing.*;
public class CenteredLayout
    private JPanel getPanel()
        GridBagLayout gridbag = new GridBagLayout();
        GridBagConstraints gbc = new GridBagConstraints();
        gbc.insets = new Insets(2,2,2,2);
        JPanel p = new JPanel(gridbag);
        addComponents(new JLabel("label 1"), new JTextField(8), p, gbc);
        addComponents(new JLabel("label 2"), new JTextField(8), p, gbc);
        addComponents(new JLabel("label 3"), new JTextField(8), p, gbc);
        JPanel panel = new JPanel(gridbag);
        panel.setBackground(Color.pink);
        gbc.anchor = GridBagConstraints.CENTER;
        gbc.insets = new Insets(0,0,0,0);
        panel.add(p, gbc);
        return panel;
    private void addComponents(Component c1, Component c2, Container c,
                               GridBagConstraints gbc)
        gbc.anchor = GridBagConstraints.EAST;
        gbc.gridwidth = GridBagConstraints.RELATIVE;
        c.add(c1, gbc);
        gbc.anchor = GridBagConstraints.WEST;
        gbc.gridwidth = GridBagConstraints.REMAINDER;
        c.add(c2, gbc);
    public static void main(String[] args)
        JFrame f = new JFrame();
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.getContentPane().add(new CenteredLayout().getPanel());
        f.setSize(400,400);
        f.setLocation(200,200);
        f.setVisible(true);
}

My number does not appear on the opposite side.

Hello,
I bought a skype number today. But, my number does not appear on the opposite side. Why is this happening? How do I cancel.
Kind Regards.

i've had my number for some time and ever since this new update, my number is not displayed on the other end or it comes up as 661 or 611 somwething like that. also, people cannot call me on that number for some reason. an answer to this would be nice

Print 2 separate documents from computer onto opposite side of paper on my hp6520

Can I print two separate documents on opposite sides of paper of my hp 6520 by clicking print on my computer rather than copying pages on printer?

Not sure of how 'sided' papers are supposed to be loaded in the cassette trays of this printer model (the User Guide manual only mentions 'sides' in relation to the drop-down Tray 1).
I suspect that you won't find an easy answer to this - see similar (old) problem with Laserjet 1320 model: http://h30499.www3.hp.com/t5/Printers-LaserJet/Need-to-reverse-the-order-cheques-print-LASERJET-1320...

How to place header and footer in OO-ALV program using class

How to place header and footer in OO-ALV program using class tell me wat r the class we shold use and their attributes as well

Hi Venkatesh,
Take a look at this how to [ABAP Objects - ALV Model - Using Header and Footer|https://wiki.sdn.sap.com/wiki/x/xdw]
it's explaining how to define the classes and use it for display an ALV with Header and Footer.
Regards,
Marcelo Ramos

How to place one column under another column in obiee report?

Hi all,
I am new to obiee, so need some help from obiee experts. Can anyone tell me how to place one column data under another column in obiee report?
i need the report to be as below
category total_students Course_enrollment Test_attended pass_test
total N % N % N %
all students ##### ## ## ## ## ## ##
Ethnicity
Asian ###### ## ## ## ## ## ##
African American ###### ## ## ## ## ## ##
white ######
Filipino ######
Gender
Male ##### ## ## ## ## ## ##
Female ##### ## ## ## ## ## ##
and similarly for other columns
where ethnicity, gender are columns in the table and Course_enrollment, Test_attended, pass_test are calculated columns.
Please help me to create a report as above if anyone knows how to do it.
Edited by: Shailaja on Jul 19, 2010 12:23 AM

Two ideas I can think of:
1) Create multiple pivot tables and then display them one under the other
2) Create multiple measure columns such as "male_amt", "female_amt", "white_amt", "asian_amt", "black_amt", etc. for all the columns you need. Then you could simple stack them in a single pivot table.
Option #2 might give you the prettiest results - but also requires a lot more maintenance (for instance, if you reclassify ethnic groups, you'd have to go through the reports to add additional metric columns).
Hope this helps,
Scott

How to place two checkboxes in a single line.

Hi all,
In selection screen , how we place two checkboxes
with labels in a sigle line.
Regards,
bala.

hi,
chk this.
chk this.
SELECTION-SCREEN: BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(3) TEXT-003
FOR FIELD P_Chk1.
SELECTION-SCREEN POSITION 30.
PARAMETER: P_chk1 AS CHECKBOX.
SELECTION-SCREEN POSITION 35.
PARAMETER: P_chk2 AS CHECKBOX.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: END OF BLOCK B2.
rgsd
anver
if hlped mark points

How to print on the first side and the back side, like in a book?

HP PHOTOSMART 6510 B 211 a
Windows XP
Product N° CQ 761B
[serial number removed for privacy]

Hi AUQUE,
Here is a link to a document that will show you how to duplex (print on both sides of the paper ).
Along with the document is a video. Hope this helps.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

How to place an image in database and how to retrieve and display it in the front end

how to place an image in database and how to retrieve and display it in the front end
and to place an image in database and retrieve the image from database using xml
please,help me out.

Create a table with a Long RAW Datatype column for storing the Image Column Data.
Create the form based on the table , which by defaults the column with LONG RAW atatype to a Image Item.
You can use Forms Built in function READ_IMAGE_FILE to read a Image file stored on the file system in to the image item.
A save on the form saves the image in the Image item in the long raw column.

How to insert values in table control & how to place listbox in table ctrl

Dear all,
            I have created table control in Module pool program. My requirement is first
               1)How to place list box in table control
               2)Based on listbox selection i have to enter values in table control row..
With Regards,
Baskaran

Hi Baskaran,
For displaing list box, use FM: VRM_SET_VALUES.
Code like that:
TYPE-POOLS: vrm.
DATA: name TYPE vrm_id,
list TYPE vrm_values,
value LIKE LINE OF list.
PARAMETERS: ps_parm(10) AS LISTBOX VISIBLE LENGTH 15.
Instead of parameter for module pool , you declare data:
AT SELECTION-SCREEN OUTPUT.
name = 'PS_PARM'.
value-key = '3500000002'.
value-text = '3500000002'.
APPEND value TO list.
value-key = '3500000003'.
value-text = '3500000003'.
APPEND value TO list.
name = 'PS_PARM'.
value-key = '3500000004'.
value-text = '3500000004'.
APPEND value TO list.
name = 'PS_PARM'.
value-key = '3000000007'.
value-text = '3000000007'.
APPEND value TO list.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id     = name
      values = list.
make the necesary change for module pool.
Hope this can solve your problems.
Regards,
Tutun

How to place a file on application server in crm?

Hi,
How to place a file from presentation server to application server in crm?, is ther any tcode or fm to do this one?
Thnaks,

Hi,
You can check this link for the issue:. Load it in the CRM server and compile the program.
[http://wiki.sdn.sap.com/wiki/display/Snippets/ApplicationserverProgram.]
cheers
Aveek

How to place the images in Indesign xml file by Javascript?

How to place the images in Indesign xml file by Javascript?
We got the Indesign xml file, how to give the image placement link by Indesign javascript? Please help me its urgent.

Hi,
You can pass the image url as a href attribute=> file:///Users/me/Documents/my_pic.jpg directly within your xml. It just needs that you pass a local, static and valid url.
If you want to add image later once the xml is flowed and so target specific nodes and inject images, it's a bit more complex. If the node is not part of the layout, you may try to reach the XMLElement objet and such an attribute, then layout the element.
var x = some XMLElement
x.xmlAttributes.add("href","file:///Users/m/Documents/my_pic.jpg" );
If already placed, then you have to get the associated pageItem, then place your file into it.
pagItm.place ( File ( "/Users/m/Documents/my_pic.jpg" ) );
Hope that helps,
Loic
http://www.loicaigon.com

How to place tif file through a script in an indesign document?

how to place tif file through a script in an indesign document?

Emanuele:
it works if i just run a script....
but since i have been using a gui to do some functions, this place command is not able to place the output tif file back into the document

How to place component underneath (opposite side) a large through hole component?

Similar Messages

Maybe you are looking for