How to place frames of html in servlets.

hi,
Iam new to servlets can any body tell me how to solve this. In a servlet two frames should be there like any web site can any body tell me how to do that.
regards
sonali

Could you elaborate a little bit. From what I read above it looks like you have no clue what a servlet is.

Similar Messages

  • How to read frames in html/tutorial

    Hello,
    I would like to learn which classes/methods are used for reading frames in an html page.
    May you please post me a link in Sun tutorials related to Reading frames?
    thanks :)

    There is no API for "reading" webpages logically, but there are a few classes which provide access to pages through the HTTP protocol and expose the content of the pages.
    There may be non-Sun APIs for this, but none that I have used.
    I would suggest you build your own classes for doing this after carefully reading the HTML, CSS, and JavaScript (ECMA Script) or VBScript specifications.
    If the page you request is a frameset, then simply read the content starting with "<Frame>" (similiar anyway), and get the "frames" that are referenced, then point your class to that page, and read again and so on.
    REFERENCES
    http://www.jdom.org/
    http://sourceforge.net/projects/javahtmlparser
    These might help you.

  • How can I display the HTML page from servlet which is called by an applet

    How can I display the HTML page from servlet which is called by an
    applet using the doPost method. If I print the response i can able to see the html document. How I can display it in the browser.
    I am calling my struts action class from the applet. I want to show the response in the same browser.
    Code samples will be appreciated.

    hi
    I got one way for this .
    call a javascript in showDocument() to submit the form

  • How to place the animation in the middle of the .html

    Hi there,
    i have got a question. How to place the whole animation in the middle of the ".html".
    Hope you know what i mean.
    Benno.

    Center the stage follow the four step process below
    Code to paste into Stage > compositionReady
    //Center the Stage
    sym.$("Stage").css({"margin-left":"auto","margin-right":"auto"});
    Darrell

  • How can I add links to open xml and csv files stored in another location? Please advice how to place links in my frame maker document?

    Hi,
    I would like to know as to how can I add links to open xml and csv files stored in another location? Please advice how to place links in my frame maker document?
    Kindly advice.
    Thanks
    Priya

    Special > Hypertext > Command "open document" will do its best to open the target document inside FrameMaker, which may not be much help; Special > Hypertext > Command "message …" will use the application you specify. The user guide for 7.0 says this about absolute links, and I don't think anything has changed since:
    For example, to start PaintBrush and open the Ship.pcx file on drive C you would use the command message system pbrush.exe C:/Ship.pcx
    I've not often used a relative link, and not recently: the same source says
    folder levels are separated by a slash / even in Windows and Mac
    [relative links] FrameMaker searches for a relative pathname beginning in the folder that contains the current document
    [absolute links] FrameMaker searches for an absolute pathname beginning at the top of the file system. In Windows, the absolute pathname begins with the drive specifier, a colon and a slash.

  • How do I add an html link/banner to a page in my flash website?

    I purchased a flash website template and am in the process of editing my main.fla file.  In order to get listed on an advertising website with a higher rating, I have to place a reciprocal link to them on my site.  However, I cannot figure out how to place an html link/banner on my site for other businesses.  If I paste the html code in a text box, all that shows up is the html code rather than the image and link it is meant to generate.  Please help!

    Flash only supports a small amount of html in text areas.  If what you re trying to include is within what it supports, then you assign the text to the textfield using the htmlText property of the TextField...
    tfield.htmlText = "<a href="...">link</a>"; // will display "link" as a link

  • How do i use home.html in the first Jboss example

    how do i use home.html in the first Jboss example? i got the example to work through the command line method. i also got the CD example to work.
    the documentation does not tell you how to use the home.html file. the file suggests that i can call the servlet because it has this line:
    <form action="InterestServlet" method="POST" >
    from my knowledge of servlets, i should be able to put the home.html file in the same directory that the servlet is in, and as long as a web browser can access it in that location, then this should work... right?
    can someone tell me specifically what they did to get it to work? i CANNOT FIGURE OUT what the servlet URL is. my first guess would be http://localhost/servlets/InterestServlet . This doesnt work. Does anyone understand where i am coming from??
    I am using ANT, and the normal install of the latest JBoss. i do not have a web server running because the JBoss server says in the console "[INFO,WebService] Starting
    [INFO,WebService] Started webserver with address: null port: 8083
    [INFO,WebService] Codebase set to: http://thor:8083/
    [INFO,WebService] Started" and so i assume there is a web service there?????

    ADDENDUM:
    i still cant figure out my servlet question, so please help, if you can.
    i just figured out that i need to download the JBoss Tomcat/Catalina server. I got it running except that the Catalina web server only is working when i run it standalone, and i cant figure out why. It keeps throwing this exception:
    [INFO,EmbeddedCatalinaServiceSX] StandardHost[localhost]: MAPPING configuration error for request URI
    [ERROR,EmbeddedCatalinaServiceSX] HttpProcessor[8080][4] process.invoke
    java.lang.NullPointerException
    at org.apache.catalina.valves.ErrorDispatcherValve.status(ErrorDispatcherValve.java:280)
    at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:180)
    at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
    at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:163)
    at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
    at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:1011)
    at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1106)
    at java.lang.Thread.run(Unknown Source)

  • How to place two checkboxes in a single line.

    Hi all,
        In selection screen , how we place two checkboxes
    with labels in a sigle line.
    Regards,
    bala.

    hi,
    chk this.
    chk this.
    SELECTION-SCREEN: BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-001.
    SELECTION-SCREEN: BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 1(3) TEXT-003
    FOR FIELD P_Chk1.
    SELECTION-SCREEN POSITION 30.
    PARAMETER: P_chk1 AS CHECKBOX.
    SELECTION-SCREEN POSITION 35.
    PARAMETER: P_chk2 AS CHECKBOX.
    SELECTION-SCREEN: END OF LINE.
    SELECTION-SCREEN: END OF BLOCK B2.
    rgsd
    anver
    if hlped mark points

  • How to place the JFrame in center of the screen

    Hi.. please any one tell me how to place the jframe in the center of the screen.. i am working on windows.
    setLocationByPlotform is not working...

    //GETS SCREEN SIZE
            Dimension screen_Dimension =Toolkit.getDefaultToolkit ().getScreenSize ();
            //GETS WINDOWS SIZE
            Dimension frame_Dimension = window.getSize ();
            //PUTS FRAME IN THE "MIDDLE" OF THE SCREEN
            window.setLocation ( new Point (
                    (screen_Dimension.width / 2-frame_Dimension.width / 2),
                    (screen_Dimension.height / 2-frame_Dimension.height/ 2)));Not sure if you want the raw version of it.......

  • Dialog programming - How to place a select-option field in a dialog screen

    Hi all,
    In Dialog Programming, How to place a select-option field in a dialog screen.
    Kindly give me some example code...
    Thanks,
    Jaffer Ali.S

    hi Ali,
    U can add select-options in ur module pool by using  SELECTION-SCREEN BEGIN OF SCREEN <scrn> AS SUBSCREEN  command.
    check this link for reference.....
    http://help.sap.com/saphelp_47x200/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/frameset.htm
    Example Code :
    DATA : ok_code TYPE sy-ucomm.
    SELECTION-SCREEN BEGIN OF SCREEN 1010 AS SUBSCREEN.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    PARAMETERS: p_rad1 RADIOBUTTON GROUP grp1 DEFAULT 'X',
                p_rad2 RADIOBUTTON GROUP grp1,
                p_rad3 RADIOBUTTON GROUP grp1.
    SELECT-OPTIONS: s_matnr FOR  mara-matnr,
                    s_matkl FOR  mara-matkl,
                    s_mtart FOR  mara-mtart.
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN END OF SCREEN 1010.
    START-OF-SELECTION.
      CALL SCREEN 100.
    *&      Module  STATUS_0100  OUTPUT
    MODULE status_0100 OUTPUT.
    SET PF-STATUS 'xxxxxxxx'.
    SET TITLEBAR 'xxx'.
    CALL SCREEN 1010 .
    ENDMODULE.                    "status_0100 OUTPUT
    *&      Module  USER_COMMAND_0100  INPUT
          text
    MODULE user_command_0100 INPUT.
      CASE ok_code.
        WHEN 'EXIT'.
          LEAVE PROGRAM.
      ENDCASE.
    ENDMODULE.                 " USER_COMMAND_0100  INPUT
    SCREEN 100 ****************
    PROCESS BEFORE OUTPUT.
      MODULE status_0100.
      CALL SUBSCREEN sub_1010 INCLUDING sy-repid '1010'.
    <b>***** where sub_1010 is name of sub-screen area</b>
    PROCESS AFTER INPUT.
      CALL SUBSCREEN sub_1010.
      MODULE user_command_0100.
    <<< REMOVED BY MODERATOR >>>
    Harimanjesh AN
    Edited by: Marcelo Ramos on Dec 17, 2008 7:54 PM

  • How to place multiple images?

    Hi,
    How to place multiple images?
    Regards,
    Learner

    Is the script creating the frames? If so, just assign each frame a
    variable, or make them all into an array. Then use something like:
    myFrame.place("aFile");
    If the script is not creating the frame, then are they live frames on
    the page, or are they actually on a master page?
    If they're on master spreads, you'll have to release them to the page
    you want. (I think it's myMasterFrame.override(myPage) where myPage is
    the live page you want to detach them on, but you'll have to double
    check that.)
    But presuming they're regular detached frames on a page, if you want
    your script to figure out which is the first and which is the second you
    can either use script labels in the UI and then search for the script
    label, or else you'll have to write a function that will get all
    rectangles on the page (myPage.rectangles.everyItem().getElements() and
    either do a clever javascript sort, or write a straightforward function
    to sort them by height and x-pos.
    Hope that sheds some light on the task ahead!
    Ariel

  • How to forward an applet page to servlet/jsp?

    I have an applet in imageMap.jsp file. This applet displays a map. When user enters the page of imageMap.jsp, they will see the map . If user clicks a point of the map, the latitude and longitude of that point should be sent to Search.java servlet and search results should replace the current page.
    My Search.java servlet works well.
    I think I should add mouse event in the applet. I can use MouseEvent.getX() and MouseEvent.getY() in the applet to get latitude and longitude. But I do not know how to go from this applet to servlet. How can I forward applet page to servlet?

    The <jsp:plugin> action is used in pages to generate client specific HTML tags involving download and execution of the applet that is specified in the tag.

  • Need to know how to place a tiling image in the div tags

    Let me see if I can explain what I want to do in a way that makes sense.
    I have created a box using the <div> I want a background image I made in photoshop that has rounded corners. I need this image to stretch or tile the length and width of the box without duplicating the image in the tile. I don't want multiple rounded corner corner boxes appearing. Just the one stretched.
    I am guessing I need to crop the rounded corner top, bottom and take a 1 px tall crop from from the center of the image for tiling and the top and bottom remain fixed in their position.
    I don't know how to place these in the box if my assumptions about cropping are right.
    I don't know how to stretch the width of the image to fit the width of the box either. Do I need to create a fixed width image the width of the box or can it stretch to fill the width?
    Using DW CS6
    Thanks

    Tiling would mean duplicating itself horizontally and vertically to appear as though it were tiled (envision a shower wall).
    You do not want it to tile it sounds like, but you want the background image to cover the entire background by resizing to whatever size the containing <div> is.
    That can be done relatively easily with the css3 background-size property.
    The css would look like this...
    #container_id {
         background-image:url(your_image.jpg);
         background-size:100% 100%;
         background-repeat:no-repeat;
    Then the html would look like this...
    <div id="container_id>
         your content
    </div>

  • How to save data in html format while user click a save button in jsp page

    Hi All,
    I have the following requirement
    If user click on the Save Button it should display a window which allows the user to select the directory and the data is stored in the Internet Explorer Format.
    Could please anybody suggest me how to impletment the above requirment in jsp page.
    It's very urgent. Please replay ASAP.
    Thanks
    Rajeshwari

    Analyzing ur ques ...
    If user click on the Save Button it should display a window which allows the user to select the directory and the data is stored in the Internet Explorer Format.hmmm..
    There is no html object type which supports directory selection for download. There is only an input type="file" which however is related to an upload scenario.
    By downloading the file using output stream u can achieve what you want.
    You simply need to do the following things ..
    a) Write to an output stream
    b) Set the content type to "text/html" for your response
    Example ....
    response.setContentType("text/html");
    response.setHeader("Content-disposition",
    "attachment; filename" +
    "Example.html" );
    javax.servlet.ServletOutputStream stream = res.getOutputStream();
    StringBuffer text = new StringBuffer(1024);
    text.append("some text . . . ");
    text.append("more text . . . ");
    stream.write(data);
    stream.close();

  • How to Place Approve and Reject Button in every row to approve and reject the particular order in sapui5

    Hi Experts,
       How to Place Approve and Reject Button in every row  to approve and reject the particular order in sapui5.
      Please Kindly help me.
    Thanks & Regards
    Chitti Babu

    Hi Chitti,
    You can achieve this using sap.m.CustomListItem.
    View :
    <core:View xmlns:core="sap.ui.core" xmlns:mvc="sap.ui.core.mvc"
      xmlns:l="sap.ui.layout" xmlns="sap.m" controllerName="demoallinonegrid.tablewithscroll"
      xmlns:html="http://www.w3.org/1999/xhtml">
      <Page title="Title">
      <content>
      <ScrollContainer horizontal="true" width="100%">
      <Table id="empTable">
      <headerToolbar>
      <Toolbar>
      <Label text="Employees"></Label>
      </Toolbar>
      </headerToolbar>
      <columns>
      <Column width="12em">
      <Label text="Employee Id"></Label>
      </Column>
      <Column width="12em">
      <Label text="Last Name"></Label>
      </Column>
      <Column width="12em">
      <Label text="First Name"></Label>
      </Column>
      <Column width="12em">
      <Label text="Title"></Label>
      </Column>
      <Column width="12em">
      <Label text="Approve"></Label>
      </Column>
      <Column width="12em">
      <Label text="Reject"></Label>
      </Column>
      </columns>
      </Table>
      </ScrollContainer>
      </content>
      </Page>
    </core:View>
    Controller:
    var model = new sap.ui.model.json.JSONModel();
      model.loadData("http://services.odata.org/Northwind/Northwind.svc/Employees?$format=json",null,false,'GET',false,null);
      this.getView().byId("productTable").setModel(model);
      var template = new sap.m.ColumnListItem({
      cells:[
            new sap.m.Text({text:"{EmployeeID}"}),
            new sap.m.Text({text:"{LastName}"}),
            new sap.m.Text({text:"{FirstName}"}),
            new sap.m.Text({text:"{Title}"}),
            new sap.m.Button({text:"Approve"}),
            new sap.m.Button({text:"Reject"})
      this.getView().byId("empTable").bindAggregation("items","/value",template);
    Output:
    Regards,
    KK

Maybe you are looking for