How to play back mts files in Bridge CS 5.1?

I figured out that the reason of slow and stuttering playback of my AVCHD clips in Premiere was that I used re-wrapped H.264 files in .mov container. That makes it easy to visualize them in QT or in the Finder, but Premiere cannot play them smoothly. The original .mts files play smoothly in Premiere, but they are not recognized in Bridge. What gives? How can I make Bridge to use the playbacl engine of Premiere so that I can first add metadata and annotations to my clips (in Bridge) and then edit them in Premiere?

yes I second that! It'd be quite helpful to preview MTS files in Bridge - especially since you can't preview them in PPro either!
Laurence Bartone
http://cinzophoto.com

Similar Messages

  • How can I play 1080p MTS file without conversion?

    Hi,
    I wasn't yet able to find a decent player capable to play 1080p MTS files smoothly? I acquired the snapshots using a Sony DSC-HXV9 and I don't want to convert them. Any suggestions?
    Thanks

    This MTS files can't be direcly played by media player. You can find yourself a converter app. But since you don't want to convert your videos I recommend you VLC player, it may help you .But the quality may not very good. for some free converter app: Handbrake, MPEG Streamclip, freevideomaker.

  • How can i open .mts files in premiere cs4?

    Hi all,
    I am using premiere cs4.
    when i import .mts file in cs4 it says file format is not supported.
    could any one please tell me how can i open .mts file in premiere cs4.
    Thanks
    Murali.

    What kind of audio did the camera record?  For example, the Sony NX5U can be set to record linear PCM audio, which will not import into CS4.  If the same camera is set to record AC3 audio, then the clips should import and play as expected.  This thread may help:
    Adobe Community: AVCHD audio
    Jeff

  • Lightroom - how to restore backed up files (not Lightroom catalogue) from one external drive to another?

    How to restore backed up files (not lightroom catalogue) from one external drive to another.
    I recently backuped my photo files from one external drive to another. The backup (carbon copy cloner) pointed to some corrupt files on the original drive.
    I have deleted those files and am finding good copies of them  in Time Machine backups.
    I want to get rid of the original external drive; use the recent backup as my main external and then back it up onto a brand new drive.
    What I am not sure about is how to point lightroom to the backups so it knows to look on the new drive instead of the old drive and all those exclamation marks and question marks go away.
    There are close to 60,000 images in numerous folders all with one 'parent folder.'
    My best guess is from Lightroom Help - Create and Manage Folders -  Locate Missing Folders
    Can I point to the one parent folder and all the subfolders will come back?
    Is this the process to recover files into lightroom and will there be a problem with so many photos?

    http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

  • How to open a zip-file in Bridge for PC?

    How to open a zip-file in Bridge for PC?

    I think it's built in, just double click on it and it should open with Archive Utility. I dunno, maybe Unrar X might work for you>
    JB

  • How do I back up files and reinstall original disks on my Power Mac G-4 (2000)

    How do I back up files and reinstall original disks on my Power Mac G-4 (yr. 2000). I know that sounds basic but I have very few techno skills. So please "talk down" to me. I had a newer PC (2005) but the hard drive crashed and I am trying to resuscitate this old mac until I can afford to buy a new one. I am in the middle of writing a book (based on Steve Job's life) and must have SOMETHING to write with. Anyone have a better one they can loan me? I am in Maine on the coast. BTW this machine seems to have trouble reading or formatting most CD-disks. Can anyone recommend a type and brand that works well with this model? Thanks for any assistance anyone can render. Here is what I have:
    Machine Name:          Power Mac G4
      Machine Model:          PowerMac3,4
      CPU Type:          PowerPC G4  (2.9)
      Number Of CPUs:          1
      CPU Speed:          467 MHz
      L2 Cache (per CPU):          1 MB
      Memory:          768 MB
      Bus Speed:          133 MHz
      Boot ROM Version:          4.2.8f1

    Why do you want to reformat the drive?  Is it because the machine is running slow?
    Be sure to backup you important files, like the book, daily.
    The cheapest approach would be to try to figure out why the machine is running slow.  Be sure to try safe boot.
    You may want to run these "standard" fixes if the problem persists.
    1) Check the amount of free space on your harddrive.  You should have a several gigs free.
    2) You should run disk utility
          Macintosh-HD -> Applications -> Utilities -> Disk Utility
          a) verify the disk
          b) update your permissions.
    3) Try a safe boot.
         Shutdown your machine.  Hold down the shift key.  Poweron.  Wait awhile; wait awhile while you harddrive
         is being checked.
         http://support.apple.com/kb/ht1455
    4) Another way to correct filesystem problems is into single use mode.
         This page will tell you how to get into single user mode.
         http://support.apple.com/kb/HT1492
        Basically, you hold down the command + s key then  powering on your machine. The command key
        has a little apple symbol on the lower left. It is between the alt/option key and the space bar. 
    4) You may want to run applejack to clean up your machine.
          http://applejack.sourceforge.net/
    6) Run hardware diagnostics.  It's good for a sanity check.
    The older versions of ccc were donationware.
    Here are two utilities for making a complete backup of your internal hard drive.  I've recommend using one of these so that you can create a bootable system  on your external hard drive. ( PPC require a firewire connected drive. )  Once created, you can run your system from the external drive.  Hold down the option key on your keyboard then power on your machine.  This will bring you in startup manager click on the drive image you wish to boot then click on the arrow key to the right.
    "Clone, synchronize, backup. Schedule and forget it."
    http://www.bombich.com/software/ccc.html
    "SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless."
    http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html

  • How to play a FLV file located in a second FMS?

    How to play a FLV file located in a second FMS not directly accessible by the flash client?
    - I am publishing an audio stream from the flash client to a FMS;
    - This FMS then publishes the stream to a second FMS, which records the stream to a FLV;
    How can I play in the client the FLV audio file that I recorded in the second FMS?
    - The first FMS is accessible by the flash client, but the second FMS is only accessible by the first FMS.
    thanks in advance
    fabio

    Answer in http://www.flashcomguru.com/forum/forum_posts.asp?TID=4276&PN=1&TPN=1

  • How to play a wave file through the DAQ board?

    Hi there,
    we want to play a wave file that is saved on the harddrive via the DAQ board. Means we want to connect a amp to the analog output of the DAQ to amplify the sound and play it through a speaker.
    We couldn't find any VI that does that. Can anybody tell us how to play a wave file, or perhaps even send us a VI that can do that?
    Thanks a lot for your help
    Martin - Physical Optics Corporation

    Hi Martin,
    The only example that I could find on how to do this was using our
    older Traditional DAQ drivers version 6.9.3.  If you're using Traditional
    DAQ drivers, the vi can be found here. 
    The example reads a 8-bit mono .wav file (an example .wav file is included in the .zip file) and writes it to the analog out of your DAQ card.  I've updated the
    example to work with our newer DAQmx drivers and attached it here.  
    I hope this helps,
    Paul C.
    Message Edited by Paul C. on 08-14-2007 05:47 PM
    Attachments:
    daqmx_wav_file_to_ao_output.zip ‏27 KB

  • How to get back hosts file

    help me pls..
    my iphone can't be update bcos file hosts deleted. i use mac OSX 10.6.8..
    how to get back the file hosts?...thank...

    ''Nokios [[#question-1058774|said]]''
    <blockquote>
    Woke up to find that , the file I left downloading through the night was not here afters hours of downloading time and bandwidth .
    I discovered a very disturbing unacceptable "Blocked may contain a virus or spyware"..MAY !!!
    I am mad against Mozilla because I do not have the time to re download. Here is my question:
    Is there a "Vault" or a "quarantine" folder where I can recover this file??
    (I know that the source of such messages is Google and that in the future I will uncheck a line on the options' security tab.This is not my problem.)
    My problem is: Can I find it somewhere and recover it without re-downloading??
    </blockquote>
    Unfortunately the file is not stored anywhere on your harddrive. It has been deleted entirely.
    If you think this file block is a "false positive" and that the file is actually safe, you could do one of the following:
    (1) Download the file using a downloader add-on that bypasses this security check. I heard about this in another thread but haven't tried it myself (and also, I don't know which add-ons to trust for this!).
    (2) Disable the Safe Browsing feature temporarily to get the file, then turn it back on. There is a checkbox in the Options dialog:
    "3-bar" menu button (or Tools menu) > Options > Advanced
    On the Security tab, it's the "Block reported attack sites" checkbox. The other checkbox relates to phishing sites and I don't think it affects downloads.

  • HT6312 How do I back up files on my IMac?

    How do I back up files, photos, etc. on my iMac? The info on the Mac only says OS X 10.9.5, not OS X Mavericks...not sure about this discrepancy.

    Use Time Machine, or use a product such as the Disk Utility, Carbon Copy Cloner, or SuperDuper to create a bootable clone, or drag-copy documents to an external drive.
    Mavericks is a collective name for Mac OS X 10.9 through 10.9.5.
    (116315)

  • How do i back up files to a external drive

    How do I back up files to an external drive

    See the Help file:
    http://help.adobe.com/en_US/elementsorganizer/using/WSae2ea3b149d0c3591ae939f103860b3d59-7 f50_WIN.html
    Ken

  • Some my files are missing.How can i back my files?

    some my files are missing.How can i back my files?

    Searching with spotlight doesn't tell you where they are?
    If you back up your files with TimeMachine, you can restore them very easily, though.

  • Mts files cannot imported with audio in pro cc6. how i can import mts files with audio?

    when i am importing mts files in pro cc6. every time it is being imported without audio. though original mts files have audio. how can i import mts files with audio in cc6?

    To clarify Media Browser suggestion - very important that you copy ALL content from SD card to hard drive before importing using Media Browser. If you only have the .mts files alone, there is stuff missing that is needed for Premiere to properly interpret the video/audio.
    Thanks
    Jeff Pulera
    Safe Harbor Computers

  • How can you back up files that are on an external drive?

    How can you back up files that are on an external drive?

    hw999 wrote:
    How can you back up files that are on an external drive?
    Easy way, CLONE IT to another HD
    HD cloning software options:
    1. SuperDuper HD cloning software APP (free)
    2. Carbon Copy Cloner APP (will copy the recovery partition as well)
    3. Disk utility HD bootable clone.
    Methodology to protect your data. Backups vs. Archives. Long-term data protection
    https://discussions.apple.com/docs/DOC-6031
    hw999 wrote:But all I want to do is include the data that I store on an (second) external drive (internal drive getting too full) part of the auto back up process using timemachine.
    BAD IDEA
    You want one backup (ie Time machine) and one (or more) data archive of just all your raw files (drag and drop, or cloned etc.)

  • How can I import .mts files into Final Cut Studio from my Sony High Def Camcorder

    How can I import .mts files from my Sony High Def camcorder into Final Cut Studio?

    Also see: https://discussions.apple.com/community/professional_applications/search.jspa?pe opleEnabled=true&userID=&containerType=&container=&spotlight=true&q=.mts

Maybe you are looking for