How to populate Material..

Hi ,
i have 2 input field..
Parameter for Plant
select options for Material.
one is for Plant and other is for Material my requirement is if i enter the Plant say 1000 then in the material input field should all the material tht are in plant which we have entered above i,e 1000 when i press F4.

Hello,
Use the Fm F4IF_INT_TABLE_VALUE_REQUEST and select all the material for the particular plant and pass it to this fm.
It should be use in the AT SELECTION-SCREEN of plant field.
If useful reward.
Vasanth

Similar Messages

How to Populate Materialk number in special ledger

Hi,
We have special ledger ODS where we have material number as data field. But its not getting populated. The table in R/3 used for special ledger extractor doesnt have Material number. How to populate material number in BW for special ledger?
Thanks

Hi Rajesh,
I am using PEXR2002 format for Idoc. Problem is i want Cheque number to populate in the Idoc for assigned payment method. For that i have assigned payment method for the cheque lot using t-code FCHI. After this i created proposal and run the payment. Status shows 1 generated, 1 completed. But the Idoc doesn't get created.Whats the problem. Can someone help me in this issue.
Thanks,
Shilpa
Edited by: Shilpa Korad on Jan 20, 2010 9:29 AM
Edited by: Shilpa Korad on Jan 20, 2010 9:48 AM

How to populate the Zfield in info cube

Dear All,
This the data in the infocube 0sd_c03
0material          0sold_to          Truck No          Zfield Need to update
3000          TESTING          2199          1
HSD BS II          OMC          2198          1
HSD BS II          TESTING          2201          3
3000          TESTING          2201          3
HSD BS II          OMC          2200          2
3000          TESTING          2200          2
I need the logic to be build is
For one Truck no, if sold to and material are unique then i need to update a flag (Zfield) as 1
For one Truck no, if sold to is one and for 2 different materials then i need to update the flag (Zfield) as 2
For one Truck no, if sold to are 2 and for 2 different materials then i need to update the flag (Zfield) as 3
is it possible to do if so please let me know how to populate the same. please give me some idea about the coding
if you have any doubts please ask
regards
venu

Hi Venu,
You can use Virtual Characteristics are characteristics whose values will be derived during query time.
0INFOPROV will be found in data package dimension.
Check below link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e051fda8-71a9-2a10-ac9e-8d17414a8c8c&overridelayout=true
Virtual characteristic
Regards
Chandra

How to Populate Internal table data to Table Control in a Report Program

Dear All,
       How to Populate Internal table data to Table Control in a Report Program? It is a pure report program with out any Module pool coding involved, which is just used to display data. Till now it is being displayed in a report. Now the user wants the data to be displayed in a table control. Could someone tell me how to go about with this.
Thanks in Advance,
Joseph Reddy

If you want to use a table control, you will need to create a screen.
In your report....
start-of-selection.
perform get_data. " Get all your data here
call screen 100. " Now present to the user.
Double click on the "100" in your call screen statement. This will forward navigate you to the screen. If you have not created it yet, it will ask you if you want to create it, say yes. Go into screen painter or layout of the screen. Use the table control wizard to help you along the process. It will write the code for you. Since it is an output only table control, it will be really easy with not a lot of code.
A better way to present the data to the user would be to give it in a ALV grid. If you want to go that way, it is a lot easier. Here is a sample of the ALV function module. You don't even have to create a screen.
report zrich_0004
       no standard page heading.
type-pools slis.
data: fieldcat type slis_t_fieldcat_alv.
data: begin of imara occurs 0,
      matnr type mara-matnr,
      maktx type makt-maktx,
      end of imara.
* Selection Screen
selection-screen begin of block b1 with frame title text-001 .
select-options: s_matnr for imara-matnr .
selection-screen end of block b1.
start-of-selection.
perform get_data.
perform write_report.
* Get_Data
form get_data.
select mara~matnr makt~maktx
            into corresponding fields of table imara
              from mara
               inner join makt
                 on mara~matnr = makt~matnr
                    where mara~matnr in s_matnr
                      and makt~spras = sy-langu.
endform.
* WRITE_REPORT
form write_report.
perform build_field_catalog.
* CALL ABAP LIST VIEWER (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            it_fieldcat = fieldcat
       tables
            t_outtab    = imara.
endform.
* BUILD_FIELD_CATALOG
form build_field_catalog.
data: fc_tmp type slis_t_fieldcat_alv with header line.
clear: fieldcat. refresh: fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic    = 'Material Number'.
fc_tmp-fieldname = 'MATNR'.
fc_tmp-tabname   = 'IMARA'.
fc_tmp-outputlen = '18'.
fc_tmp-col_pos    = 2.
append fc_tmp to fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic    = 'Material'.
fc_tmp-fieldname = 'MAKTX'.
fc_tmp-tabname   = 'IMARA'.
fc_tmp-outputlen = '40'.
fc_tmp-col_pos    = 3.
append fc_tmp to fieldcat.
endform.
Regards,
Rich Heilman

How to populate BAPI_SALESORDER_CREATEFROMDAT2

Hi Experts,
I have created a value contract, in which the line items are assortment module number, which will further have materials.
Then If I create a sales order with reference to the contract, it validates the material quantity rate with contract quantity and it throws error it material quantity rate exceeds the value of contract.
But when I create sales order with reference to contract using BAPI_SALESORDER_CREATEFROMDAT2, it is not giving the error and it creates the sales order. It is not updating the contract released value also.
So, I am missing some parameters in BAPI. Kindly help me in populating the BAPI parameters to do this validation.
Thanks and regards,
Venkat

Hi venkat,
sorry you have not yet discovered the forums search function, try
[Search for How to populate BAPI_SALESORDER_CREATEFROMDAT2|http://forums.sdn.sap.com/search.jspa?objID=f50&q=Howtopopulate+BAPI_SALESORDER_CREATEFROMDAT2]
Another common solution without bothering the community is
[How to populate BAPI_SALESORDER_CREATEFROMDAT2|http://www.google.cn/search?hl=en&source=hp&q=HowtopopulateBAPI_SALESORDER_CREATEFROMDAT2&btnG=GoogleSearch&aq=f&oq=Howtopopulate+BAPI_SALESORDER_CREATEFROMDAT2&cad=h]
Best regards,
Clemens

How to populate the attribute of the characteristics in Contract?

Hi Experts,
I need to populate the attribute "Truck Net Value" of the characteristics during the Contract creation with reference to Sales Order. Brief description of the scenerio:
We are using a variant material in the Sales Order. This material has different attributes which the end user need to populate during the SO creation. Now I have to create a Contract with reference to Sales Order. While creating the Contract with reference to Sales Order I want to populate the attribute "Truch Net Value" of the Sales Order with some value and update the Sales Order. So to update the attibute of the Sales Order during Contract Creation. Is there any function module that I can use for this purpose? I know where to write the code in the standard program? But I don't know how to populate the attibute?
Thanks
MAN

Hi,
Welcome to SCN!!!
After the contract is created, you can call the BAPI BAPI_SALESORDER_CHANGE along with COMMIT to change the order texts. Alternatively you can use FMs SAVE_TEXT and COMMIT_TEXT to change any kind of texts.
You can check the parameters to be passed by placing the breakpoints in these FMs, change and save the text manually from VA02 in the sales order.
Thanks,
Vinod.

How to populate the TEXT field in MIGO

Hi folks,
While creating material document in MIGO or MB01, i am inserting some data in TEXT ( Field in line item level ). This text data is disappearing , once mat doc is created.
how to populate the TEXT field in MIGO?Is there any cusomisation?it's urgent .
Regards
pabi

Hello Pabitra,
I had a similar issue in my Project.
Please verify if the SMOD enhancement MBCF0002 (EXIT_SAPMM07M_001) is active in your system.
If this is the case, verify from two angles:
a) Whether the Enhancement was accidentally activated - If yes, then De-activate the same
b) If there is some logic coded in the User Exit, but, the Text is somehow not determined...even the existing content in the text field (input to EXIT_SAPMM07M_001) will get vanished.
Hope that your problem will be resolved by this. Pls reward points.
With Regards
Vijay Gajavalli

How to populate the data into the newly added infoobjects?

Hi,
how to populate the data into the newly added infoobjects?
Thanx in advance,
Ravi.

hi ravi,
here is one example how to enhance.
Goto RSA6- select the 0Material.- Click on Enhance extract structure-> it will take u to the next screen there u need to create the field material group1. and append it to 0Material.
Goback to RSA6-- RC on 0material-- it will take you to customer version edit screen- here unchk the Hide and Field only known in exit options n save it.
Next Go back to RSA6-- 0material- click on Function enhancement it will take you to CMOD Screen( here we need to enter the project name and click create if not created on click display)
In the next screen we find the function exits Like EXIT_SAPLRSAP_001 FOR T DATA AND EXIT_SAPLRSAP_002 FRO Master Data,_003 for Text n _004 for Hierarchies.
select the appropriate function exit and double clikc on it. It will take you to Function builder screen.
D Click on defn of Include ZXRSAU01. it will take you to abap editor screen.
here u need to include the code for the enhanced fields n also write the code to populate the dat for that particular field.
save it and avtivate the code.
Hope this Is helpz,
partha

How system populates price in MIRO?

hi experts,
how system populates price in MIRO? assume in my po(scheduling agreement(Me32lL)) for a material, old price 5 INR, current price in 6 INR, so i changed the price in PO also , in MIRO system will take current price or old price?
regards
rk

Hi,
IN Miro Price will flow from PO history that is value after doing MIGO,
but for the PO price basis from Info record or last PO document.
Regards

How to populate budget in creation of Fund?

Hi Gurus,
Can anybody give me a clue on how to populate the 'budget'or 'Expired' in the process of creating a fund in CRM? I could not fill out because the fields are grey .
Thanks

nobody can answer , so delete it

How to restrict Material Class in Sales Contract Doc

Hi,
I need to restrict Material Class in Sales order based on Item catagory, Material group4 and Sales contract Document type.
If the above 3 fields having a particular value then the system should restrict all the other classes of that material and display only a particular class and it's related characteristics.
If any one come across such a senario then pklease let me know.
Regards
Ajay

Hi,
You have to make few configuration settings before you actually restrict at the object level. The solution is clearly discussed in the below thread:
how to restrict material master by material type t-code MM01
Hope this helps!!
Regards,
Raghu

How to populate the condition tables of CRM 7.0

Hello Friends,
How to populate values in CND* tables , i assume these are the tables that hold the conditions.
Thanks and Regards,
Vasu

Hi,
if you refer to CND* tables those are tables involved in the condition master data exchange between ERP and CRM (on CRM side). Actual condition tables for pricing related condition records start with CNC*. In the help there is a documentation of the condition master data tables for pricing available: http://help.sap.com/saphelp_crm70/helpdata/EN/0e/91f9392486ce1ae10000000a114084/content.htm
Hope this helps.
Best Regards,
Michael

How to populate the time component of a cube?

We have a question regarding how to populate the time component of a cube. Let me explain:
We are using OWB 10gR2. We have created a cube with several dimensions. We are now building the mapping to load the cube. The cube operator has two columns for every dimension (e.g., "customer" and "customer_id" for the "customer" dimension).
We understand that, in this case, "customer_id" stands for the dimension business key, so we create an arrow from the business key in the source table to the "customer_id" column in the cube operator.
So far so good. The mapping works all right, and the cube is loaded correctly.
Now we need to do the same for the time dimension. We have already created the time dimension and we have loaded it. We have also included it in the cube, so now we have two new columns in it: "time_day_code" and "time", both NUMBER data type.
We have the "sale_date" column (DATE data type), in the source system and, of course, now we want to populate the date column in the cube. We suppose that, somehow, we have to translate the "sale_date" field into the numeric column of the surrogate key of the time dimension. How should do we do this? I suppose that OWB must do the translation for us, just as it does for the other dimensions, but how? We have been looking into the manuals, and we have found no explanation on how to go about this.
Any help would be appreciated.
Best regards
Juan Algaba

Hi Juan
You are right this should have been in the manuals, checked and there is only a brief mention (Using a Time Dimension in a Cube Mapping section)
The identifier format should have been documented for each level and will involve creating the formatted attribute for input to the cube operator's time dimension reference attribute.
The time dimension business keys are stored as follows;
Day Level - YYYYMMDD
Month Level - YYYYMM
Week Level - YYYYWW
Quarter - YYYYQ
Year - YYYY
If you have a source that has a SQL date datatype for example and want to construct the key for a cube's time dimension at the day level something like the following expression can be used to construct the time reference from a SQL date...
to_number(to_char( time_key, 'YYYYMMDD'))
The result of this expression can be used as input to the cube's time dimension attribute.
Cheers
David

How to populate data in PAY_PEOPLE_GROUPS table (People Group Flexfiled)

Hello
We are migrating the data from one oracle instance to another oracle instance which are in same version of Oralce Applications 11.5.10.2. As a part of migration can anybody let me know how to populate data in "People Group Key Flexfiled" (PAY_PEOPLE_GROUPS table), ideally I will create or update employee records from the source instance to destination instance, so while creating or updating the employee records in can pass people_group_id while calling to the assignment api but my question here is before passing group id to the api i should have the data populated in PAY_PEOPLE_GROUPS TABLE so that i can fetch the group id as per the combination and pass it in to the api.. please suggest...

Thanks for your information! by any chance do you have any sample code which will create/update assignments with People Group Flexfield; when i check "hr_assignment_api.update_emp_asg_criteria" it only has parameter to pass people group id and not having segments parameters to pass individual segments.
Also let me know the links if you have any for all HR API guide which will help me to develope the interfaces...
My requirement is we have two instances in which in one instance we are treating as source for HR which will be used to master for all HR related activities and we are planning to develope an interface which will bring master instance in sync with dummy instance.

Uix:Tree - How to populate in jsp ?

Hello all,
I'm having trouble to know how to populate an <uix:tree> in a JSP page. I see the UIX Developer's guide and the SimpleTreeData example and the documentation about uix:jsp is very poor. The data that will be posted in the <uix:tree> was provided by IFS. Then, I populate a DataObjectList with the files name. The point is that I don't know how to make a link between this DataObjectList, populated in a class(*.JAVA) file and the <uix:tree>(*.JSP) file. I wanna know how to use only <uix:jsp> and don't use *.UIX files, only *.JSP and *.JAVA files, ok ?
Here are some code part :
This is the JSP file
<%@ taglib uri="http://xmlns.oracle.com/uix/ui" prefix="uix" %>
<%@ page import="Hierarquia" %>
<%@ page import="oracle.cabo.ui.data.DataObjectList" %>
<%@ page contentType="text/html;charset=windows-1252"%>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<title>
Ifs - PublicaÃ§Ã£o de Documentos
</title>
</head>
<uix:document>
<uix:styleSheet />
<body>
<uix:body>
<uix:pageLayout>
<uix:contents>
<uix:form name="teste">
<uix:contents>
<%
DataObjectList dados = null;
Hierarquia x = new Hierarquia();
x.conecta();
x.populateTree();
dados = x.getResultSet();
%>
<uix:formattedText text="Teste" />
<uix:tree id="arvore_teste" nodesBinding="????" formName="teste">
</uix:tree>
</uix:contents>
</uix:form>
</uix:contents>
</uix:pageLayout>
</uix:body>
</body>
</uix:document>
</html>
Thanks folks !
Carlos

Carlos -
I believe that the best way to do this is to use scriptable variables, eg:
<uix:tree id="arvore_teste">
    <%
      // Assuming "dados" contains your tree data
      arvore_teste.setNodes(dados);
    %>
</uix:tree>See the "Scriptable Variables" section in the "UIX JSP Tag Libraries" chapter of the UIX Developer's Guide for more info...
Andy

How to populate Material..

Similar Messages

Maybe you are looking for