How to position a BOX right after a list?

Hi all!
I need to put a box right after list which I am not how long.
But I do not know yet how to do it because as I know, the BOX command has an XPOS and YPOS parameter which forces me to put position values...
So how do I do it?
Thank you!

Hi,
You can create one new window and in that window draw the box.
and display that window only on last page.
so your problem will be resolved...........

Similar Messages

How to get check box in alv grid list output

hi gurus,
can anyone inform me
how to get check box in alv output it should not be a pop up window
thank you
regards
kals.

or
hi go through the fallowing code.
code*&----
*& Report YGS_ALV_BOM *
REPORT YGS_ALV_BOM .
TABLES : MAST,STKO,STPO.
TYPE-POOLS: SLIS.
TYPES : BEGIN OF TY_MAST,
CHECK_BOX,
MATNR TYPE MAST-MATNR,
WERKS TYPE MAST-WERKS,
STLAN TYPE MAST-STLAN,
STLNR TYPE MAST-STLNR,
STLAL TYPE MAST-STLAL,
END OF TY_MAST.
TYPES : BEGIN OF TY_STKO,
STLTY TYPE STKO-STLTY,
STLNR TYPE STKO-STLNR,
STLAL TYPE STKO-STLAL,
STKOZ TYPE STKO-STKOZ,
BMENG TYPE STKO-BMENG,
BMEIN TYPE STKO-BMEIN,
END OF TY_STKO.
TYPES : BEGIN OF TY_STPO,
LIGHTS,
STLTY TYPE STPO-STLTY,
STLNR TYPE STPO-STLNR,
STLKN TYPE STPO-STLKN,
STPOZ TYPE STPO-STPOZ,
IDNRK TYPE STPO-IDNRK,
MENGE TYPE STPO-MENGE,
MEINS TYPE STPO-MEINS,
END OF TY_STPO.
DATA : IT_MAST TYPE TABLE OF TY_MAST,
WA_MAST TYPE TY_MAST,
IT_STKO TYPE TABLE OF TY_STKO,
WA_STKO TYPE TY_STKO,
IT_STPO TYPE TABLE OF TY_STPO,
WA_STPO TYPE TY_STPO.
DATA : lt_fieldcat TYPE slis_t_fieldcat_alv,
ls_layout TYPE slis_layout_alv,
ls_event TYPE slis_alv_event,
lt_event TYPE slis_t_event,
it_sortinfo type slis_t_sortinfo_alv,
ls_header TYPE slis_listheader,
lt_header TYPE slis_t_listHEADER.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
SELECT-OPTIONS : S_MATNR FOR MAST-MATNR.
START-OF-SELECTION.
PERFORM GET_DATA.
PERFORM BUILD_FIELDCAT USING LT_FIELDCAT.
PERFORM BUILD_LAYOUT.
END-OF-SELECTION.
PERFORM DISPLAY_DATA.
*& Form GET_DATA
text
--> p1 text
<-- p2 text
form GET_DATA .
REFRESH : IT_MAST.
SELECT MATNR
WERKS
STLAN
STLNR
FROM MAST
INTO CORRESPONDING FIELDS OF TABLE IT_MAST
WHERE MATNR IN S_MATNR.
endform. " GET_DATA
*& Form BUILD_FIELDCAT
text
--> p1 text
<-- p2 text
form BUILD_FIELDCAT USING LT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : L_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
REFRESH : LT_FIELDCAT.
L_FIELDCAT-COL_POS = 1.
L_FIELDCAT-FIELDNAME = 'MATNR'.
L_FIELDCAT-TABNAME = 'IT_MAST'.
L_FIELDCAT-REF_FIELDNAME = 'MATNR'.
L_FIELDCAT-REF_TABNAME = 'MAST'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 2.
L_FIELDCAT-FIELDNAME = 'WERKS'.
L_FIELDCAT-TABNAME = 'IT_MAST'.
L_FIELDCAT-REF_FIELDNAME = 'WERKS'.
L_FIELDCAT-REF_TABNAME = 'MAST'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 3.
L_FIELDCAT-FIELDNAME = 'STLNR'.
L_FIELDCAT-TABNAME = 'IT_MAST'.
L_FIELDCAT-REF_FIELDNAME = 'STLNR'.
L_FIELDCAT-REF_TABNAME = 'MAST'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
endform. " BUILD_FIELDCAT
*& Form BUILD_LAYOUT
text
--> p1 text
<-- p2 text
form BUILD_LAYOUT .
CLEAR LS_LAYOUT.
LS_LAYOUT-BOX_FIELDNAME = 'CHECK_BOX'.
LS_LAYOUT-BOX_TABNAME = 'IT_MAST'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_DATA
text
--> p1 text
<-- p2 text
form DISPLAY_DATA .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_STRUCTURE_NAME =
IS_LAYOUT = LS_LAYOUT
IT_FIELDCAT = LT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = IT_MAST
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " DISPLAY_DATA
FORM PF_STATUS USING RT_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'YSTATUS' OF PROGRAM SY-REPID
EXCLUDING RT_EXTAB.
ENDFORM.
FORM USER_COMMAND USING RF_UCOMM TYPE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
CASE RF_UCOMM.
WHEN '&NEXT'.
PERFORM GET_DATA_BOM .
PERFORM BUILD_FIELDCAT_BOM USING LT_FIELDCAT.
PERFORM BUILD_LAYOUT_BOM.
PERFORM DISPLAY_DATA_BOM.
ENDCASE.
ENDFORM.
*& Form GET_DATA_BOM
text
--> p1 text
<-- p2 text
form GET_DATA_BOM .
CLEAR : WA_STPO,
WA_MAST.
REFRESH : IT_STPO.
DATA : IT_CHECK TYPE TABLE OF TY_MAST.
LOOP AT IT_MAST INTO WA_MAST.
IF WA_MAST-CHECK_BOX EQ 'X'.
APPEND WA_MAST TO IT_CHECK.
ENDIF.
ENDLOOP.
SELECT STLTY
STLNR
STLKN
VGKNT
IDNRK
MENGE
MEINS
FROM STPO
INTO CORRESPONDING FIELDS OF TABLE IT_STPO
FOR ALL ENTRIES IN IT_CHECK
WHERE IDNRK EQ IT_CHECK-MATNR.
CLEAR WA_STPO.
LOOP AT IT_STPO INTO WA_STPO.
SELECT SINGLE * FROM MAST WHERE MATNR EQ WA_STPO-IDNRK.
IF SY-SUBRC = 0.
WA_STPO-LIGHTS = '2'.
ELSE.
WA_STPO-LIGHTS = '1'.
ENDIF.
MODIFY IT_STPO FROM WA_STPO.
ENDLOOP.
endform. " GET_DATA_BOM
*& Form BUILD_FIELDCAT_BOM
text
--> p1 text
<-- p2 text
form BUILD_FIELDCAT_BOM USING LT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : L_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
REFRESH : LT_FIELDCAT.
L_FIELDCAT-COL_POS = 1.
L_FIELDCAT-FIELDNAME = 'STLTY'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'STLTY'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 2.
L_FIELDCAT-FIELDNAME = 'STLNR'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'STLNR'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 3.
L_FIELDCAT-FIELDNAME = 'STLKN'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'STLKN'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 4.
L_FIELDCAT-FIELDNAME = 'IDNRK'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'IDNRK'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
L_FIELDCAT-COL_POS = 5.
L_FIELDCAT-FIELDNAME = 'MENGE'.
L_FIELDCAT-TABNAME = 'IT_STPO'.
L_FIELDCAT-REF_FIELDNAME = 'MENGE'.
L_FIELDCAT-REF_TABNAME = 'STPO'.
APPEND L_FIELDCAT TO LT_FIELDCAT.
endform. " BUILD_FIELDCAT_BOM
*& Form BUILD_LAYOUT_BOM
text
--> p1 text
*<-- p2 text
form BUILD_LAYOUT_BOM .
CLEAR : LS_LAYOUT.
LS_LAYOUT-LIGHTS_FIELDNAME = 'LIGHTS'.
LS_LAYOUT-LIGHTS_TABNAME = 'IT_STPO'.
endform. " BUILD_LAYOUT_BOM
*& Form DISPLAY_DATA_BOM
text
--> p1 text
<-- p2 text
form DISPLAY_DATA_BOM .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND_BOM'
I_CALLBACK_TOP_OF_PAGE = 'TOP9'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = 'ALV_BACKGROUND'
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = LS_LAYOUT
IT_FIELDCAT = LT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = IT_STPO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " DISPLAY_DATA_BOM
FORM TOP9 .
CLEAR LS_HEADER.
REFRESH LT_HEADER.
LS_HEADER-TYP = 'H'.
LS_HEADER-INFO = 'BILL OF MATERIALS'.
APPEND LS_HEADER TO LT_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = LT_HEADER
I_LOGO = 'ENJOYSAP_LOGO'
I_END_OF_LIST_GRID =
ENDFORM.
FORM USER_COMMAND_BOM USING RF_UCOMM_BOM LIKE SY-UCOMM
SEL_FIELD TYPE SLIS_SELFIELD.
CASE RF_UCOMM_BOM.
WHEN '&IC1'.
SET PARAMETER ID 'MAT' FIELD WA_STPO-IDNRK.
SET PARAMETER ID 'WRK' FIELD WA_MAST-WERKS.
SET PARAMETER ID 'CSA' FIELD WA_MAST-STLAN.
CALL TRANSACTION 'CS03' AND SKIP FIRST SCREEN.
ENDCASE.[/code]

How to add check box in the ALV list

dear Experts,
i have a requirement.
i want show the check boxes in my ALV list.
can u please give the solution.
thanks

TYPE-POOLS: slis.
*---internal tables
DATA: BEGIN OF it_flight OCCURS 0,
SEL, " add a single character field in the final output table
carrid LIKE sflight-carrid,
connid LIKE sflight-connid,
fldate LIKE sflight-fldate,
seatsmax LIKE sflight-seatsmax,
seatsocc LIKE sflight-seatsocc,
END OF it_flight,
*--internal tables for alv
it_fieldcat TYPE slis_t_fieldcat_alv,
wa_fcat LIKE LINE OF it_fieldcat,
layout TYPE slis_layout_alv,
it_sort type slis_t_sortinfo_alv,
wa_sort like line of it_sort.
DATA: BEGIN OF it_flight_sel OCCURS 0,
SEL,
carrid LIKE sflight-carrid,
connid LIKE sflight-connid,
fldate LIKE sflight-fldate,
seatsmax LIKE sflight-seatsmax,
seatsocc LIKE sflight-seatsocc,
END OF it_flight_sel.
data: wa_flight like it_flight.
In the layout set give the name of the field
whose checkbox will be created ( SEL as it has 1 char only )
layout-box_fieldname = 'SEL'.
*---start-of-selection .
START-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_internal_tabname = 'IT_FLIGHT'
i_inclname = sy-repid
CHANGING
ct_fieldcat = it_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2.
*----get data
SELECT carrid
connid
fldate
seatsmax
seatsocc
FROM sflight
INTO CORRESPONDING FIELDS OF TABLE it_flight
UP TO 20 ROWS.
wa_fcat-do_sum = 'X'.
MODIFY it_fieldcat FROM wa_fcat TRANSPORTING do_sum
WHERE fieldname = 'SEATSOCC' .
wa_sort-fieldname = 'CARRID'.
wa_sort-group = 'UL'.
wa_sort-up = 'X'.
APPEND wa_sort TO it_sort.
clear wa_sort.
wa_sort-fieldname = 'CONNID'.
wa_sort-subtot = 'X'.
wa_sort-up = 'X'.
APPEND wa_sort TO it_sort.
clear wa_sort.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
is_layout = layout
it_fieldcat = it_fieldcat
it_sort = it_sort
TABLES
t_outtab = it_flight
EXCEPTIONS
program_error = 1.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
WHEN '&IC1'.
Check field clicked on within ALVgrid report
IF rs_selfield-fieldname = 'EBELN'.
Read data table, using index of row user clicked on
READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
Set parameter ID for transaction screen field
SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
Sxecute transaction ME23N, and skip initial data entry screen
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
ENDIF.
WHEN '&IC1'. "'&DATA_SAVE'. "user presses SAVE
loop at it_flight into wa_flight.
if wa_flight-Sel EQ 'X'.
collecting records in table it_flight_sel to process further
append wa_flight to it_flight_sel.
clear wa_flight.
TYPE-POOLS: slis.
*---internal tables
DATA: BEGIN OF it_flight OCCURS 0,
SEL, " add a single character field in the final output table
carrid LIKE sflight-carrid,
connid LIKE sflight-connid,
fldate LIKE sflight-fldate,
seatsmax LIKE sflight-seatsmax,
seatsocc LIKE sflight-seatsocc,
END OF it_flight,
*--internal tables for alv
it_fieldcat TYPE slis_t_fieldcat_alv,
wa_fcat LIKE LINE OF it_fieldcat,
layout TYPE slis_layout_alv,
it_sort type slis_t_sortinfo_alv,
wa_sort like line of it_sort.
DATA: BEGIN OF it_flight_sel OCCURS 0,
SEL,
carrid LIKE sflight-carrid,
connid LIKE sflight-connid,
fldate LIKE sflight-fldate,
seatsmax LIKE sflight-seatsmax,
seatsocc LIKE sflight-seatsocc,
END OF it_flight_sel.
data: wa_flight like it_flight.
In the layout set give the name of the field
whose checkbox will be created ( SEL as it has 1 char only )
layout-box_fieldname = 'SEL'.
*---start-of-selection .
START-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_internal_tabname = 'IT_FLIGHT'
i_inclname = sy-repid
CHANGING
ct_fieldcat = it_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2.
*----get data
SELECT carrid
connid
fldate
seatsmax
seatsocc
FROM sflight
INTO CORRESPONDING FIELDS OF TABLE it_flight
UP TO 20 ROWS.
wa_fcat-do_sum = 'X'.
MODIFY it_fieldcat FROM wa_fcat TRANSPORTING do_sum
WHERE fieldname = 'SEATSOCC' .
wa_sort-fieldname = 'CARRID'.
wa_sort-group = 'UL'.
wa_sort-up = 'X'.
APPEND wa_sort TO it_sort.
clear wa_sort.
wa_sort-fieldname = 'CONNID'.
wa_sort-subtot = 'X'.
wa_sort-up = 'X'.
APPEND wa_sort TO it_sort.
clear wa_sort.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
is_layout = layout
it_fieldcat = it_fieldcat
it_sort = it_sort
TABLES
t_outtab = it_flight
EXCEPTIONS
program_error = 1.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
WHEN '&IC1'.
Check field clicked on within ALVgrid report
IF rs_selfield-fieldname = 'EBELN'.
Read data table, using index of row user clicked on
READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
Set parameter ID for transaction screen field
SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
Sxecute transaction ME23N, and skip initial data entry screen
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
ENDIF.
WHEN '&IC1'. "'&DATA_SAVE'. "user presses SAVE
loop at it_flight into wa_flight.
if wa_flight-Sel EQ 'X'.
collecting records in table it_flight_sel to process further
append wa_flight to it_flight_sel.
clear wa_flight.
Please follow the code.

HOW TO TRIGGER CHECK BOX EVENT IN BLOCKED LIST OUT PUT

Hi Abapers,
I am developing ALV Blocked list using 3 internal tables.
in output list my requirement is if I click one check box in one intrrnal table the below internal table checkboxes should be checked.
how to solve this problem this is very urgent to me I hope somebody will help me.
Regards
Shashikumar.G

Hi
First you need to register the events of clicking of the checkbox.
Once registerred, you can capture that event and when occured, you can set the checkboxes for below internal table.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/95/34eb7feb6211d3a7270000e83dd863/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/95/34eb7feb6211d3a7270000e83dd863/frameset.htm</a>
Regards
Raj

Creating new row right after popup opens (JBO-35007 because of trigger)

Hi,
I have the same popup (with an ADF form) to add and to edit data. But i have two buttons which displays this popup - Add new and Edit, Edit works OK, on add, i insert new record like this:
        DCIteratorBinding dciter =
            (DCIteratorBinding)bindingContainer.get(iterator);
        ViewObject view = dciter.getViewObject();
        Row newRow = view.createRow();
        view.insertRow(newRow);
        view.setCurrentRow(newRow);before popup is open. And it adds a new record. But the record has id -10 (or some other negative number). This -10 is shown on calling page (the page from which the popup is open) in ADF ReadOnly table as -10 as id and other cells in row empty. That shouldn't happen (se bellow why). User then edits empty form in popup, and commits - then i get JBO-35007 because -10 changed to 123 - because of trigger.
I tried to requery - it doesn't help, see Refresh after pop-up window closes.
Can you suggest a solution on how to create a row right after popup opens?
Also,
i create new record on button's LaunchListener method. This method seems to execute before popup is open and so it affects the calling page also. I think the problem would be solved if new row would be created after popup is opened, not while opening it. (clicking create in popup works fine)

in my real case, i usually don't show ids; but to simplify debugging, i created test project where i show as many things as possible.
you mean, creating new record like following?
        bindings.getOperationBinding("Create").execute();I don't use that because i don't get empty fields in popup window (although new record is created). Actually, i don't know how to set this created record to be selected one. Suggestions?
And I did some more testing, if I create new record with clicking on Create (not creating new row automatically), i get JBO-35007 only if there was selected any other than the first row in table.
and i tried to move create method binding in pagedef, so it's the first one.. But it seems like there is no effect.
btw, i found this in one of examples on web:
   <invokeAction Binds="Execute"
                  id="refreshTableViewObjectAfterAddingNewApp"
                  Refresh="prepareModel"
                  RefreshCondition="#{processScope.addedNewApp}" />refresh condition must be true when adding new row and false for everything else. I'm not sure what that does, but it seems to work... :)
I really shouldn't use the same View Objects in popup and 'master' page, should I?

CHECK BOX IN DROP DOWN LIST

HI PLS TELL ME HOW TO INSERT CHECK BOX IN DROP DOWN LIST.
NITIN

Hi,
You can select only one value from dropdown list.Checkboxes are to select more than one.Why do you need checkbox in drop down??
Thanks,
Keerthi

How to display a percentage sign ( % ) after a text box in a screen

hi experts,
Can anybody tell me how to display a percentage sign ( % ) after a text box in a screen.

Hi Ajay,
Try to use the [Position|http://help.sap.com/saphelp_nw04/helpdata/EN/9f/dba7e235c111d1829f0000e829fbfe/frameset.htm] option of selection screen.
By using this you can place the text as a comment at a desired position on the selection screen.
The syntax would be like this :
SELECTION-SCREEN POSITION <pos>.
Regards,
Swapna.

How do i get music videos to play like the music does on my ipad, for example one right after another and shuffle

I need to know how I can get the music videos on my IPad to play like the music does. What I mean id setting up a playlist, shuffle, and have them play one right after another instead of going back to the main screen.

At the top of the playlist where it shows the playlist title and the number of songs, there are two icons. Click the "play" triangle to add the entire playlist to "Up Next", or the "shuffle" symbol to do the same thing but in random order. But the currently playing track will stop playing, and all the songs in "Up Next" will be removed (replaced by the ones from this playlist).
If you hold down the "option" key while clicking those icons, the currently playing song will continue playing, and the new playlist will be added to "Up Next" (above the songs that were already there).

How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or password. If I delete my apps and start over, I may lose the apps that I purchased...

How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or Password. If I delete my appos and start over, I may lose the apps that I purchased (like the ones for $5 +....

Apps are always tied to the ID that was used to purchase them originally. Did you try entering your old password and see if that works?
If you need to sign out of your old account go to Settings>Store>Tap on your ID and sign out. Sign in with the new one.
you can also access your ID in the featured tab of the App Store. Swipe to the bottom of the screen and you will find it there as well.

How can i run a executable right after a rman job has run?

How can i run a executable right after a rman job has run?
I have a rman job that execute every night. The backup is local.
I want to have a duplicate of the backup on another machine.
I want the executable to sync the directory to execute right after the rman backup.
How can i do this using the job scheduler?
Normaly, i would configure rman to run the backup on both location. But im having trouble with rman regarding this:ORA-600 [2103] on RMAN Backup to NFS mounted file system

Hi,
If the rman job is in fact a Scheduler jobs (appears in the dba_scheduler_jobs view) then you can create a second event-based job that runs after the rman job (and set the raise_events attribute for the rman job).
Instructions are here
Create Event based job
Hope this helps,
Ravi.

Hi, my Ipod Schuffle (4 gen) dissapears from windows vista right after I execute Itunes, I've change the drive letter, erase temps in App data file, verified USB drivers, etc... Can someone guide on how to solve this?

Hi, my Ipod Schuffle (4 gen) dissapears from windows vista right after I execute Itunes, I've change the drive letter, erase temps in App data file, verified USB drivers, etc... Can someone guide on how to solve this?

If you want the shuffle to be always visible in Windows (outside of iTunes), you need to Enable disk use.
Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, select the Summary tab. You should see a checkbox that says Enable disk use. Check it and click Apply.
NOTE: If disk use is enabled, you have to Eject the shuffle in iTunes, BEFORE you physically disconnect it. If disk use is NOT enabled, you can disconnect the shuffle at any time, as long as iTunes is not doing something with it at that moment (such as syncing); the shuffle's light will then be blinking (to indicate DO NOT DISCONNECT).
So, unless you want to use the shuffle like a USB flash drive (carry random files on it), you may want to NOT Enable disk use.

How to stop the auto-start of log reader agent (replication) right after my database is restored?

I have the scenario where the SQL server is restored (after migration).
This database has transactional replication set-up on one of the databases. When I do a manual delete and restore of the database, I see that the replication starts right after the publisher and subscriber are restored.
Replication agents should not start and run before the integrity checks are completed. How to stop the replication from auto starting right after the migration?
Thanks in advance - Jebah

Thanks Pradyothana, I have disabled the logreader, distribution agents through sp_update_job in Tsql script. I have also verified that there are no pending transactions to be replicated to the subscriber, I see that the job is still being executed. Is there
any other way to disable the jobs?
Steps I followed
Started with a Working publication and subscription
Disabled the jobs (log reader and distribution agents)
Backed up publisher, subscriber, distribution and msdb
Deleted the publication, subscription, publisher and subscriber
Restored the publisher, subscriber, distribution and msdb
Enabled the jobs and executed sp_replrestart
Observations/Issues
Replication does not work
Replication monitor does not show any error
Jobs are shows as enabled but not started in job monitor
Not able to start/stop the log reader and synchronization manually.
I am not sure if I have missed something while restoring the db.
Thanks in advance

After purchasing the Photoshop cs6 update for my Mac, the download page says for "Windows". Will this still work? How do I get the right download without purchasing again

After purchasing the Photoshop cs6 update for my Mac, the download page says for "Windows". Will this still work? How do I get the right download without purchasing again?

no.
you need the update for a mac, not windows.
Product updates

The icons for links are gone. In their place are hyphentated boxes. After I click on the link once the real icon comes back. But litterally EVERY link icon is now a hyphenated box till I click once. How can I fix this?

The icons for links are gone. In their place are hyphenated boxes. After I click on an existing link once the real icon comes back. For Example: I have several bookmark links for Amazon. Those links now have hyphenated boxes as their icons not the Amazon icon. Once I click on an existing link the Amazon icon is activated and replaces the hyphenated boxes. Literally EVERY bookmark / link icon is now a hyphenated box till I click once. How can I fix this? I'm running Firefox 8.0 on windows XP. This problem started this week. Before and After upgrading to firefox 8.0 from 7.xxxx. See screen shot example.jpg i've attached below. Double click to enlarge it for better viewing. Any input welcomed. Not a major problem but I would like to have the icons back.
Thanks
Maxboyd

Thanks. That solved it. I had my doubts since I wasn't concerned about my lost bookmarks. I was concerned about the broken functionality. In any event, restoring from a backup solved both the functionality and the lost bookmarks. I appreciate the response!

How do I Position Tabs Top-Right, Bottom-Right, etc??

I've spent countless hours looking over the net and here trying to find anything that shows how to position tabs within a JTabbedPane (or a deriviative of it) in OTHER than top-left, left-top, right-top or bottom-left.
My most immediate need is to put the tabs top-right, and I was able to modify the layout to do that, but that screwed up all other positions. When I hacked up the paint method to changed the rects, it worked until the tabs lost focus.
Digging really deep into an extension of JTabbedPane, TabbedPaneUI, and the inner TabbedPaneLayout, I kept running into dead-ends in one place or the other, like, finding private methods, or different mechanisms for getting the tabplacement.
If anyone has any pointers, please let me know. At the moment, I'm so exasperated that I'm actually writing my own custom tabbed pane. However, my tabbed pane will allow ANY component as a tab and allow 12 anchors for the tabs, but I'd still just like to get the tabs top right.
Java Joe Morgan

You're friggin' kiddn' me! OK.. that makes me feel really stupid... but I generally think of component orientation as an internationalization thing and it simply never dawned on me to try!
I'll get a big laugh out of this some day... somewhat like you are right now!
Thanks... you've saved me about only a zillion lines of code.
Things to note for those finding this answer:
1) For left and right tab runs, this doesn't have an effect, but why would it? Yet, it might have been nice to have a right-bottom or left-bottom.
2) For top and bottom tab locations, if you want the tab order the same left to right order as you add them, you have to add the tab components in reverse order. That is, in your code you add Tab1, Tab2, Tab3, and set component orientation right to left, your tabs will be, left to right, Tab3, Tab2, Tab1. So to get tabs positioned on the right (top or bottom) and left to right order Tab1, Tab2, Tab3, you'll need to add them Tab3, Tab2, Tab1.
Edited by: Java-Joe-Morgan on Dec 17, 2009 2:31 PM

How to position a BOX right after a list?

Similar Messages

Maybe you are looking for