How to post GR from po more than one time?

i want to post goods receipt from PO more than one time even the quantity of PO have been totally receipted.

Hi Dear,
whats the problem in that if you have recieved 100 quantity all together, and want to post in break-ups then you can surely do that by changing the quantity in the GR, the system will each time suggest the remaining full quantity, you just need to change it.
Hope it helps.
Regards,
Yawar Khan

Similar Messages

How can i find out the more than one times occurance of integer in a array?

How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Please some one help me as sson as possible. thanks in advance....

Kumar_Mohan wrote:
How can i find out the more than one occurance of integer in a array. Assume i have 2,2,3,4,2,5,4,5 in a Array and i need to find out the how many times of 2, 5 and 4 is exists in that array. Sort the array. Then loop through it and compare each i-th element with the (i+1)-th element.
Please some one help me as sson as possible. thanks in advance....In future postings, please refrain from telling that it is urgent, or you need help ASAP. It is rather rude to do so.

How to prevent the User from loading more than one seq file?

Hi,
I would like to prevent the tester operator from loading more than one test sequence. Any ideas how to do it?
Thanks
Rafi

Hi Marty,
Marty_H wrote:
Hello mhousel,
Testexec.exe by default loads the sequence files that were last open when it runs. It is often desired behavior to have multiple sequence files load automatically.
[Mark Housel] Maybe for some but certainly not for me.
This should be easily handled by TestStand without any problems. What do you mean by "chaos ensues"?
Certainly Teststand doesn't care a bit how many sequences are open. But, when my sequences open they initialize HW of the ATE associated with
that sequence file during the sequenceFileLoad callback. e.g. I allocate TELNET handles to a terminal
server that connects to multiple console within the system and als for
the UUT.
If a second sequence opens it knows nothing about the other sequence and again tries to open a TELENT session to the same port of the
terminal server and obviously fails, so my sequence reports that it
can't properly initialize the ATE HW. Bad juju!
Are your sequence files set to run automatically when they are loaded?
I guess so. Other than the trick of logging in as the special noExecution user and having special code in my sequence and modified Process Model I have no idea how to prevent a sequence fronm "runnin" when opened.
If you want to prevent Testexec.exe from loading multiple files, you should be able to close out one of the open files when it loads and that sequence file should not load in the future. I hope that helps.
The trick I read somewhere else of modifying the Testexec.uir file to never re-load a sequence file automatically seemes to have covered up solved the problem.
Thanks,
Mark

How to share more than one Time Machine folder

Hi,
With Snow Leo Server I found how to find how to share more than one Time Machine Folder but I can't see how to do the same with Lion Server, could you help me with that ?
The goal of that is to offer one TM folder per user which is located on a dedicated partition in order to limit the size of TM backups per user (150Gig).
In Lion, in can only share one TM folder for everybody and I didn'tfind if I can set a limit size per user...
Thank you in advance,

I have figured out a way to enable multiple backup targets.
However, it's one of these things I wouldn't want to describe to anyone except true programmer types, because everyone else has a 90%+ chance of messing up their system if they do something wrong.
It involves turning off file sharing, and then editing the plist files in /private/var/db/dslocal/nodes/Default/sharepoints/
The gist of it is this:
a) first create all the share points you later want to use for TimeMachine, and set them up for afp-only file sharing, also create one TM target, which you can either use later, or have there so the system has one entry it knows how to handle. I just made a bogus one that I'm not actively using.
b) turn off file sharing in Server.app
c) turn off TimeMachine in Server.app
d) now you can edit the files, the easiest is with Xcode, so you may want to install that first
e) for each sharpoint you made in a) there will be a corresponding .plist file in the location indicated, these are the files that need to be edited.
f) for each of these files
     1) the item0 string property in the timeMachineBackup array must be switched from 0 to 1
     2) a new key of type array with the name timeMachineBackupUUID must be created
     3) in the newly created array an item of type string must be placed with the value of a UUID, which can be created with the shell command uuidgen
g) make sure all the edited plist files are saved
h) turn on TimeMachine in the Server.app again
If all went well, you now should be able to go to one of your networked client computers and see all the time machine share points just created as options for being a time machine target.
Anyway, if you go that route: be careful, don't blame me if you muck things up...

How do you select and move more than one bookmark at a time? Shift+Click does not select multiple items that are next to one another in a list because the item

How do you select and move more than one bookmark at a time?
Shift+Click does not select multiple items that are next to one another in a list because the items open in firefox before this happens.

Use the bookmarks library. You may use Shift +Click, and Ctrl + Click to create groupings of selected bookmarks to drag and drop.
* one method of opening the bookmarks library is keyboard shortcut <br /> Ctrl+Shift+B (Windows)
*see also [[How to use bookmarks to save and organize your favorite websites]]
*and [[Use bookmark folders to organize your bookmarks]]

How to deploy a Webapplication on WAS more than one times on same server?

Hi all,
I 've a special problem:
In our web-app (some DC's) also stored propertie-Files. Now we would to deploy this application more than one times at same server using different WebContentRoots. (f.e. http://server/app1 and http://server/app2 a.s.o.)
We know, that we must create different EAR-Projects and refer the web-Module and configure the application.
But in the second application there it's recommended to change some properties.
How we can handle this in JDI without copy the web-application?
I hope my question can be understood.
Best Regards
Sven Rickelt
Using Netweaver + WAS 6.40 2004 SP 13

Hi Sven,
as I'm new to NWDI, I cannot give you a 100 percent, field-tested solution. But have you already thought about using the Configuration-Adapter?
If you can change the source of your web-app, you could maintain the data formerly stored in property files using the configuration adapter of visual administrator. The SC <a href="http://help.sap.com/saphelp_nw04/helpdata/en/45/e7e14b517b42788a1c166f9f32455e/content.htm">configuration</a> allows you to access this data.
With this approach you can stick to one web-application and do the configuration work separately for each deployed application.
Best regards,
Frank

Using Maverick, how is it possible to open more than one calendar window?

Hi, I'm using Maverick 10.9.1
My question is: how is it possible to open more than one calendar window? i would like to have on the right my personnal calendar dates and on the left, my company calendar.
Many thanks in advance for your help!
ph

See if the section on group calendar helps.
http://www.dummies.com/how-to/content/basics-of-calendar-in-os-x-mavericks.html

How do I install Lion on more than one Mac

How do I install Lion on more than one Mac? As I have a MacBook Pro and a iMac?

Purchase Lion on one of the machines.
Log in to the MAS with the other machine, using the same Apple ID you originally bought Lion with. Go to the Purchased Tab and Lion should be available for download. It should say Install.
It's possible that you will be asked for credit information as a form of verifying who you are.

HT3529 How do you send message to more than one address, iPhone 5, 6.0.1/

How do you send message to more than one address on iphone 5, 6.0.1?

... or, once the first address appears as a bubble, simply start typing the second address in the "To" field.

SMS ---HOW DO YOU SEND SMS TO MORE THAN ONE PERSON

SMS HOW DO YOU SEND SMS TO MORE THAN ONE PERSON

yes you can. look at this:
4. I cannot receive or send MMS (text with pics)?
iPhone at this time CANNOT send MMS at this time. Whether or not this will be remedied remains to be seen. A workaround is to email their SMS/MMS servers with the picture as an attachment.
Alltel = [email protected]
AT&T = [email protected]
Boost Mobile = [email protected]
Cingular (AT&T) = [email protected]
Einstein PCS = [email protected]
Sprint = [email protected]
T-Mobile = [email protected]
US Cellular = [email protected]
Verizon Wireless = [email protected]
Virgin Mobile = [email protected]
*x is the digit of your phone number
for an awesome thread with lots of good info:
http://discussions.apple.com/thread.jspa?threadID=1032295

Can we prevent entering the same condition more than one time?

Hi friends,
Can we prevent the user for entering the same condition type more than one time in same sales order?
Rama rao

/write codes in Include ZXVVAU05/
/prgm avbl in one of the msg in forum/
DATA: BEGIN OF tXKOMV OCCURS 50.
INCLUDE STRUCTURE KOMV.
DATA: END OF tXKOMV.
data : tab_name(40) type c ,
ld_len type i , ld_len1 type i .
field-symbols : <tab> type any.
tab_name = '(SAPMV45A)XKOMV[]'.
assign (tab_name) to <tab>.
txkomv[] = <tab>.
describe table txkomv lines ld_len .
sort txkomv by kposn KSCHL .
delete adjacent duplicates from txkomv comparing kposn KSCHL .
describe table txkomv lines ld_len1 .
if ld_len1 ne ld_len .
refresh txkomv .
message e002(zmm) with ' Please remove duplicate condition in item price' .
endif .

Block create type of operation more than one time

Hello SAP CRM Experts!
I have a question.
How do I get block the user create a type of operation more than one time?
For example, I have a kind of opportunity that can be created only once for each client. How can I do this using the customizing?
Best Regards!
Tks!

Hi,
you could only limit the assigned internal number range to one object, which would allow only one document to be saved. The next creation would then fail since there is no number available.
This is the only solution I can think of, otherwise you need to program a BADI.
Regards, Kai

Execute more than one times external command of OS Windows NT

Hi all,
        I have to execute more than one times from an ABAP program an exernal command of Operating system windows NT . In order to reach this goal I found the standard program RSBDCOS0 and it works very well if you execute it one time. Unfortunately I have to execute this external command more than one times. Is there any soluiton?
thank to all
                    Gino Bonfiglioli

Well why are you using this report RSBDCOS0 to execute external commands?
Because SAP provides certain function modules that can be used to call operating system commands; so you can use these functions to do your task.
Just check the following link
http://help.sap.com/saphelp_nw2004s/helpdata/en/fa/0971e1543b11d1898e0000e8322d00/frameset.htm
As you mentioned that you need to execute multiple times, you can easily put the call to function module inside a loop or do/enddo structure. for example consider the following
do 3 times.
call function 'SXPG_COMMAND_EXECUTE'
      exporting
           commandname                   = 'Put operating system command here'
           additional_parameters         = full_filename
           targetsystem                  = targtsys
           stdout                        = 'X'
           stderr                        = 'X'
           terminationwait               = 'X'
      importing
           status                        = sxpg_status
           exitcode                      = sxpg_exitcode
      tables
           exec_protocol                 = sxpg_results
      exceptions
           no_permission                 = 1
           command_not_found             = 2
           parameters_too_long           = 3
           security_risk                 = 4
           wrong_check_call_interface    = 5
           program_start_error           = 6
           program_termination_error     = 7
           x_error                       = 8
           parameter_expected            = 9
           too_many_parameters           = 10
           illegal_command               = 11
           wrong_asynchronous_parameters = 12
           cant_enq_tbtco_entry          = 13
           jobcount_generation_error     = 14
           others                        = 15.
write the results
loop at sxpg_results.
write:/ sxpg_results-length,
         sxpg_results-message.
endloop.
refresh sxpg_results.
enddo.

Will syncing my iphone 3GS more than one time daily wear out the battery?

Will syncing my iPhone 3GS more than one time daily with Outlook 2007 wear out the battery? An Apple Care advisor said I should only sync it one time per week, but I need to do it daily as I use the calendars and notes for work.

CindiS wrote:
Will syncing my iPhone 3GS more than one time daily with Outlook 2007 wear out the battery?
No.
An Apple Care advisor said I should only sync it one time per week
Whoever you talked to has no idea what they are talking about. Ignore their advise.

How to create combobox to display more than one columns

I need kind help with the following question. As the combobox includes two pieces--textbox and the combobox list. Then how to create a combo box bean, which is based on table EMP(empno number(6), ename varchar2(40)) records for example, to achieve these features:
1) allow more than one columns to be displayed in its records list--e.g., I need to show these records:
empno (value) ename (label)
103 David M Baker
104 David M Baker
105 Kelly J Volpe
106 Krista F Carpenter
107 Michelle P Silverman
The two 'David M Baker's are different employees, but unfortunately, with the same name.
2) allow combo box list to return the column value 'empno' even though it shows both columns as above. i.e., if user picks the second record above, then the combobox list returns 104 to the textbox in the background, but the 'David M Baker' is displayed on the textbox. Of course the combobox list may return 'David M Baker' if needed when there is only one column in the list as the current standard feature.
3)allow partial match search by typing in some letters. i.e., if user types in the textbox of the combobox letter 'K' or 'k' then the partially matched records
105 Kelly J Volpe
106 Krista F Carpenter
should be automatically displayed in the combobox list, not the whole list as above; then user may double click to choose one of the two or if user continues to type in 'R' or 'r', then the uniquely matched record 'Krista F Carpenter' is displayed in the textbox and the 106 is returned to the textbox.
4) as a bonus if it's doable, allow combobox to return values to different textboxes when its records list has more than one columns.
The reason I need these features is that I am working on the project migrated from Microsoft Access applications to centralized Java version web application. We at beginning promised to users community that Java swing will provide all the GUI user friendly features Microsoft Access has, but now we got stucked--we ate our words and got tons of complains from our users community. This is just the most needed component I posted here. I really hope that Java would add all the default GUI user-friendly features to compete with MS since its Win95 GUI has been accepted as industry standard. And most users are used to it. They claimed that they don't know and don't care what tool you use the newly created application should be more user friendly, not the opposite.
I would be very much appreciated if any one would help me with this item.

Thanks for your comments. I think nobody expects Sun to write everything including special features for its components. But I do think Sun should provide at least those standard user-friendly features for the GUI components because most users have been used to the GUI user-friendly features provided by Win95 and Access/Excel applications. Then this will help us to productively create applications to beat MS applications.
Other wise like me, to get the existing GUI features, existed in old MS Access application, for our migrated Java application, I must re-create the GUI components library first which is a big burden to me at least, for others it might be fun for coding on their own from scratch, but I have to focus on the timing of project.
If you really can pass the request to Sun and push them move a bit, please pass these words: before Sun starts to revise them, please play around window GUI, e.g., Access/Excel applications, then plan what to do, the bottom line is to equally match or better than them in FUNCTIONALITY(Look and feel is not my focus here). Don't ignore the influence of Windows regardless of you hate it or love it, the reality is most users are so familiar with windows GUI features which are accepted as industry standard. Thus the choice is to match or better to beat them. Don't make your car by closing your door, don't assume users will like what you come out in a closed room.

How to post GR from po more than one time?

Similar Messages

Maybe you are looking for