How to post the data into word file

Dear Forums
I am a user of jDeveloper
and working on jclient\swing.
The problem is that i want to post\Transfer data to a formatted word file. In word file there is a same table containing same contents as jtable. Now after selection of a particular row \column the data of that row\column transferred to word file table.
i have no idea about it.
Help me for the Same
thnkx.

hi,
I don't think the Javaworld stuff is needed in any case since ctrl c and ctrl v wor very fine. My problem is diffent. I want to copy paste using a mouse. I am using a Mouse Adapter with my table and using the DefaultEditorKit.copyAction() class as my action. But this does not work.. seems its not copying the data to the clipboard. But this migght be cause it works only with JTextComponent ?!
Can you please tell me how to go about it.
regards,
Sumit.

Similar Messages

  • How to writing the data into the file at the same frequency of data acquisition using myRIO

    Hi everyone,
    I have a question regarding data acquisition fequency and data recording frequency of myRIO. Hope you guys can help me out.
    Basically, I want to acquire voltage input at analog input 0 at the frequency of 1kHz and then write the data into a file (tdms format). 
    However, I always found there were only 55 or 56 data points recorded every second in the data file (see the excel sheet). 
    To confirm my data acquisition was performed at the correct frequency, I added a small function in the main loop to indicate the time spent between two acquisition events. 
    To my surprise, the period of data acquistion is correct (1ms or 1kHz) but there are only 55 or 56 data point per second recorded in the data file.
    How can I record every data point acquired by the analog input?
    Thank you!
    P.S. I am very new to myRIO. How can I manually set the system time for myRIO? The default time of my myRIO is wrong. 
    Best,
    Tengyang
    Attachments:
    test result.xlsx ‏16 KB
    Main with timed loop.vi ‏122 KB
    test result.xlsx ‏16 KB

    Have a look at the Jakarta POI project, they have a Java API for creating Word documents.
    http://jakarta.apache.org/poi/hwpf/index.html

  • How to Load the data from excel file(Extension is .CSV) into the temp.table

    Hi
    How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
    My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
    Kindly Suggest the Solution.
    Regards,
    Sachin

    Hello Sachin,
    You can use the following metalink note:How to Read Data from an EXCEL Spreadsheet into a Form Using Webutil Client_OLE2 (Doc ID 813535.1) and modify it a little bit.
    Instead of copy values into forms you can save them in your temporary table.
    Kind regards,
    Alex
    If someone's helpful or correct please mark it accordingly.

  • How to load the data from excel file into temprory table in Forms 11g?

    Hi
    How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
    My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
    Kindly Suggest the Solution.
    Regards,
    Sachin

    Declare
        v_full_filename         varchar2(500);
        v_server_path           varchar2(2000);
        v_separator             VARCHAR2(1);
        v_filename              VARCHAR2(400);
        filename                VARCHAR2 (100);
        v_stop_load             varchar2 (2000);
        v_rec_error_log         varchar2(4000);
        v_error_log             varchar2(4000);
        ctr                     NUMBER (12);
        cols                    NUMBER (2);
        btn                     number;
        RES                     BOOLEAN;   
        application             ole2.obj_type;
        workbooks               ole2.obj_type;
        workbook                ole2.obj_type;
        worksheets              ole2.obj_type;
        worksheet               ole2.obj_type;
        cell                    ole2.obj_type;
        cellType                ole2.OBJ_TYPE;
        args                    ole2.obj_type;
        PROCEDURE olearg
        IS
        args   ole2.obj_type;
        BEGIN
        args := ole2.create_arglist;
        ole2.add_arg (args, ctr);                                
        ole2.add_arg (args, cols);                                   
        cell := ole2.get_obj_property (worksheet, 'Cells', args);
        ole2.destroy_arglist (args);
        END;
    BEGIN
    v_full_filename := client_get_file_name(directory_name => null
                                     ,file_name      => null
                                     ,file_filter    => 'Excel  files (*.xls)|*.xls|'  
                                                                            ||'Excel  files (*.xlsx)|*.xlsx|'                                                                 
                                     ,message        => 'Choose Excel file'
                                     ,dialog_type    => null
                                     ,select_file    => null
    If v_full_filename is not null Then
    v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
    v_filename := v_separator||v_full_filename ;
    :LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);                                
    RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));     
    --Begin load data from EXCEL
    BEGIN
        filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
        application := ole2.create_obj ('Excel.Application');
        ole2.set_property (application, 'Visible', 'false');
        workbooks := ole2.get_obj_property (application, 'Workbooks');
        args := ole2.create_arglist;
        ole2.add_arg (args, filename); -- file path and name
        workbook := ole2.get_obj_property(workbooks,'Open',args);
        ole2.destroy_arglist (args);
        args := ole2.create_arglist;
        ole2.add_arg (args, 'Sheet1');
        worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
        ole2.destroy_arglist (args);
        ctr := 2;                                                     --row number
        cols := 1;                                                -- column number
        go_block('xxx');
        FIRST_RECORD;  
        LOOP       
                --Column 1 VALUE --------------------------------------------------------------------
            olearg;
            v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
            :item1 := v_stop_load;
            cols := cols + 1;                                                      
              --Column 2 VALUE --------------------------------------------------------------------
            olearg;
            :item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
            cols := cols + 1;
            --<and so on>
        ole2.invoke (application, 'Quit');
        ole2.RELEASE_OBJ (cell);
        ole2.RELEASE_OBJ (worksheet);
        ole2.RELEASE_OBJ (worksheets);
        ole2.RELEASE_OBJ (workbook);
        ole2.RELEASE_OBJ (workbooks);
        ole2.RELEASE_OBJ (application);
    END;
    --End load data from EXCELPlease mark it as answered if you helped.

  • How  to load the data from excel  file  into table in oracle using UTL_FI

    How to load the data from excel file into table in oracle
    and from table to excel file
    using UTL_FILE package
    Please give me some example

    This is something i tried in oracle apex
    http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
    Regards,
    CKLP

  • How to load the data from .csv file to oracle table???

    Hi,
    I am using oracle 10g , plsql developer. Can anyone help me in how to load the data from .csv file to oracle table. The table is already created with the required columns. The .csv file is having about 10lakh records. Is it possible to load 10lakh records. can any one please tell me how to proceed.
    Thanks in advance

    981145 wrote:
    Can you tell more about sql * loader??? how to know that utility is available for me or not??? I am using oracle 10g database and plsql developer???SQL*Loader is part of the Oracle client. If you have a developer installation you should normally have it on your client.
    the command is
    sqlldrType it and see if you have it installed.
    Have a look also at the FAQ link posted by Marwin.
    There are plenty of examples also on the web.
    Regards.
    Al

  • Write the data into a file in 10 ms interval within 10 sec

    Hi,
    I'm trying to write the data into a file when I press a OK button and the data should write in a file every 10ms interval. After pressing the OK button the process will stop after 10 sec.
    I've attached my VI.
    Problem is that I'm getting the result every ms. How can I get the data every 10ms? So it'll come 1000 data within 10 sec.
    For other calculations purpose I'm using Amplitude and Level Measurements block to get the mean DC voltage, so when I change the Samples to Read and Rates, the process is getting stuck.
    Any kind of suggestion is appreciable.
    Thanks,
    Chotan
    Attachments:
    DAQ_Time_Checking_For10s_02.vi ‏131 KB

    See example attached, if needed
    Nghtcwrlr
    ********************Kudos are alwayzz Welcome !! ******************
    Attachments:
    Example.vi ‏36 KB

  • How to read the data from Excel file and Store in XML file using java

    Hi All,
    I got a problem with Excel file.
    My problem is how to read the data from Excel file and Store in XML file using java excel api.
    For getting the data from Excel file what are all the steps i need to follow to get the correct result.
    Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
    Thanks & Regards,
    Sreenu,
    [email protected],
    india,

    If you want someone to do your work, please have the courtesy to provide payment.
    http://www.rentacoder.com

  • How to populate the data into the newly added infoobjects?

    Hi,
    how to populate the data into the newly added infoobjects?
    Thanx in advance,
    Ravi.

    hi ravi,
      here is one example how to enhance.
    Goto RSA6- select the 0Material.- Click on Enhance extract structure-> it will take u to the next screen there u need to create the field material group1. and append it to 0Material.
    Goback to RSA6-- RC on 0material-- it will take you to customer version edit screen- here unchk the Hide and Field only known in exit options n save it.
    Next Go back to RSA6-- 0material- click on Function enhancement it will take you to CMOD Screen( here we need to enter the project name and click create if not created on click display)
    In the next screen we find the function exits Like EXIT_SAPLRSAP_001 FOR T DATA AND EXIT_SAPLRSAP_002 FRO Master Data,_003 for Text n _004 for Hierarchies.
    select the appropriate function exit and double clikc on it. It will take you to Function builder screen.
    D Click on defn of Include ZXRSAU01. it will take you to abap editor screen.
    here u need to include the code for the enhanced fields n also write the code to populate the dat for that particular field.
    save it and avtivate the code.
    Hope this Is helpz,
    partha

  • Are there any standard Idocs or Bapis for posting the data into transaction

    Hi,
    Are there any standard Idocs or Bapis for posting the data into transactions ME42N and IK11?
    Thank You.

    Thank you.
    Any idea of the other one?

  • How to maintain the data  into database table

    Hi,
    experts,
    how to maintain the data  into database table

    There are several ways to maintain data in the database
    1. Use table maintanance generator . You can create this using SE11 and data can be edited through SM30.
    2. Loginto  SE11 with the specified table and check the ATTRIBUTES tab. There you can set some parameters for maintaining the database. When you set Maintain database, you edit the data thorugh SE11 it self
    3. Through Se16 as well.
    4. A small abap program can do the above task as well.
    Thanks,
    Raj
    Edited by: Rajanya Kolavennu on Feb 5, 2008 8:33 PM

  • How to write the data into EEPROM using Labview?

    How to write the data into EEPROM using Labview?

    You would need some sort of EEPROM programmer. Typically might
    communicate with it via serial. I don't know how you would do this in
    LV. You would need to have the command protocol for the programming
    device to start with.
    Doug De Clue
    gpibssx wrote in message news:<[email protected]>...
    > How to write the data into EEPROM using Labview?

  • How to pull the data into smartform after designing layout?

    how to pull the data into smartform after designing layout?

    call the smartform in your Driver program and pass your output internal tables in the smartforms paramaters
    Check the below Sample code.
    FORM label_print.
      DATA : g_fm_name TYPE rs38l_fnam,
             g_output  TYPE ssfcompop,
             g_control TYPE ssfctrlop,
             g_form TYPE tdsfname VALUE 'ZPRINT_LABELS',
             g_dest TYPE rspopname,
             g_printer TYPE rspoptype..
      REFRESH : i_out[],i_qals[].
      SELECT matnr maktx
             INTO TABLE i_out
             FROM makt
             FOR ALL ENTRIES IN i_mseg
             WHERE matnr = i_mseg-matnr
             AND   spras = sy-langu.
      SELECT prueflos objnr ersteldat erstelzeit matnr revlv charg mengeneinh
             INTO TABLE i_qals
             FROM qals
             FOR ALL ENTRIES IN i_mseg
             WHERE matnr = i_mseg-matnr
             AND   charg = i_mseg-charg.
    *FM to accept the device type and returns the short name of the output device
      CALL FUNCTION 'EFG_GET_PRINTER'
        EXPORTING
          x_no_dialog  = ' '
          x_obligatory = 'X'
        IMPORTING
          y_tddest     = g_dest
        EXCEPTIONS
          cancelled    = 1
          failed       = 2
          OTHERS       = 3.
    *device type name for the output device
      SELECT SINGLE patype                                  "#EC CI_NOFIELD
             FROM tsp03d
             INTO g_printer
             WHERE padest = g_dest.
    *printer setting
      g_control-no_dialog = 'X'.
      g_output-tdarmod = '1'.
      g_output-tdcopies = '001'.
      g_output-tddest = g_dest.
      g_output-tdprinter = g_printer.
      g_output-tdnewid = 'X'.
      g_output-tdimmed = 'X'.
      CLEAR wa_mseg.
      LOOP AT i_mseg INTO wa_mseg.
        READ TABLE i_out INTO wa_out WITH KEY matnr = wa_mseg-matnr.
    check for the status and filter the records
        CLEAR : wa_qals.
        LOOP AT i_qals INTO wa_qals WHERE matnr = wa_mseg-matnr
                                    AND charg = wa_mseg-charg.
          CALL FUNCTION 'STATUS_TEXT_EDIT'
            EXPORTING
              objnr            = wa_qals-objnr
              spras            = sy-langu
            IMPORTING
              line             = l_status
            EXCEPTIONS
              object_not_found = 1
              OTHERS           = 2.
          IF l_status CS 'LTCA' OR l_status CS 'SKIP'.
            DELETE i_qals.
          ENDIF.
        ENDLOOP.
        SORT i_qals BY ersteldat DESCENDING erstelzeit DESCENDING.
        IF i_qals IS INITIAL.
          l_msg = text-002.
        ELSE.
          READ TABLE i_qals INTO wa_qals INDEX 1.
          SELECT prueflos vbewertung
                 INTO TABLE i_qave
                 FROM qave
                 WHERE prueflos = wa_qals-prueflos
                 AND   kzart = 'L'.
          IF sy-subrc <> 0.
            l_msg1 = text-003.
          ENDIF.
          SORT i_qave.
          CLEAR : wa_qave.
          IF NOT i_qave IS INITIAL.
            READ TABLE i_qave INTO wa_qave INDEX 1.
            IF wa_qave-vbewertung = 'A'.
              l_msg = text-002.
            ELSEIF wa_qave-vbewertung = 'R'.
              l_msg1 = text-003.
            ELSE.
              l_msg1 = text-003.
            ENDIF.
          ENDIF.
        ENDIF.
        CLEAR : wa_ser03.
        READ TABLE i_ser03 INTO wa_ser03 WITH KEY mblnr = wa_mseg-mblnr.
    *Calling Smartform
        CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
          EXPORTING
            formname           = g_form
          IMPORTING
            fm_name            = g_fm_name
          EXCEPTIONS
            no_form            = 1
            no_function_module = 2
            OTHERS             = 3.
        LOOP AT i_objk INTO wa_objk WHERE obknr = wa_ser03-obknr.
    *Calling FM generated from the smartform
          DATA : l_date(10) TYPE c,
                 l_date1(10) TYPE c,
                 l_date2(10) TYPE c,
                 l_date3(10) TYPE c,
                 l_hyphen(1) TYPE c VALUE '-'.
          CLEAR : l_date,l_date1,l_date2,l_date3.
          l_date1 = wa_mseg-vfdat+0(4).
          l_date2 = wa_mseg-vfdat+4(2).
          l_date3 = wa_mseg-vfdat+6(2).
          CONCATENATE l_date1 l_hyphen l_date2 l_hyphen l_date3 INTO l_date.
          CALL FUNCTION g_fm_name
            EXPORTING
              control_parameters = g_control
              output_options     = g_output
              user_settings      = ' '
              g_matnr            = wa_mseg-matnr
              g_mat_text         = wa_out-maktx
              g_batch            = wa_mseg-charg
              g_rev              = wa_qals-revlv
              g_edate            = l_date
              g_lot              = wa_qals-prueflos
              g_qty              = wa_mseg-erfmg
              g_uom              = wa_mseg-erfme
              g_serial           = wa_objk-sernr
              g_smsg             = l_msg
              g_fmsg             = l_msg1
            EXCEPTIONS
              formatting_error   = 1
              internal_error     = 2
              send_error         = 3
              user_canceled      = 4
              OTHERS             = 5.
          CLEAR  g_output-tdnewid.
        ENDLOOP.
        IF sy-subrc <> 0.
          CLEAR : l_date,l_date1,l_date2,l_date3.
          l_date1 = wa_mseg-vfdat+0(4).
          l_date2 = wa_mseg-vfdat+4(2).
          l_date3 = wa_mseg-vfdat+6(2).
          CONCATENATE l_date1 l_hyphen l_date2 l_hyphen l_date3 INTO l_date.
          CALL FUNCTION g_fm_name
            EXPORTING
              control_parameters = g_control
              output_options     = g_output
              user_settings      = ' '
              g_matnr            = wa_mseg-matnr
              g_mat_text         = wa_out-maktx
              g_batch            = wa_mseg-charg
              g_rev              = wa_qals-revlv
              g_edate            = l_date
              g_lot              = wa_qals-prueflos
              g_qty              = wa_mseg-erfmg
              g_uom              = wa_mseg-erfme
              g_serial           = wa_objk-sernr
              g_smsg             = l_msg
              g_fmsg             = l_msg1
            EXCEPTIONS
              formatting_error   = 1
              internal_error     = 2
              send_error         = 3
              user_canceled      = 4
              OTHERS             = 5.
          CLEAR g_output-tdnewid.
        ENDIF.
      ENDLOOP.
      IF sy-subrc = 0.
        MESSAGE i000(zm).
      ENDIF.
    ENDFORM.                    " label_print

  • How to store the data of a file into an ArrayList?

    Hi! everyone.
    I want to know
    if I have a File, and the data in the file are type int, type String...
    And I have a ArrayList which is of type Question
    How do I store the data of that file into the ArrayList
    I tried to use the while loop(use the hasNextLine() to read the data line by line)
    But I cannot add data which are not of type Question to the ArrayList.
    Can you tell me what I should do, please?
    I also wonder that
    The data of the file are of many types, but when I try to read it with the nextLine(), the data all turn out to be of type String. Why?
    Thank you.
    Edited by: Terry001 on Apr 30, 2008 1:13 PM

    No, a line in the file is just part of a question
    The format of the file is like this:
    *<question type code>                    :     String*
    *<question point value>                    :     int*
    *<question category>                         :     String*
    *<question difficulty level>               :     int*
    *<question text>                              :     String*
    *<question correct answer>               :     String*
    *<optional question-specific data>     :     String*
    *<question terminator>                    :     String*
    And here is an example
    TF //TrueFalseQuestion
    5 //points value
    None //category
    3 //difficulty level
    The capital of the United States is Washington, D.C. //question text
    True // answer
    *** //quetion terminator
    I created an ArrayList in the Test class:
    private ArrayList<Question> questions; // Create inside constructor
        public Test (String name, String instr)
            testName = name;
            scoreEarned = 0;
            scorePossible = 0;
            instructions = instr;
            questions = new ArrayList<Question>(); //[MAX_NUMBER_OF_QUESTIONS];
        }And I tried to use the following method to store the data of the file to the ArrayList
    // This method loads a set of questions from a plain text file
        public void loadQuestionsFromFile(String fileName) throws FileNotFoundException
            try
                File fileReader = new File("input.txt");
                Scanner sc = new Scanner(fileReader);
                while (sc.hasNextLine())
                    // I don't know how to pass the data I got from the nextLine() method to the ArrayList because they are of different type
            catch (FileNotFoundException a)
                System.out.println(a);
        }    As all you said, I should create an Question object in the while loop
    Question temp = new Question ();But I have no idea how to pass the int and String to the Question object.
    Thank you

  • How to display the data in XML files into JSP using Jdeveloper.

    Hi All,
    I have two XML files one XML file has the view names and the other has the table names of a particular views, how to display the data in JSP using JDeveloper where when i click a particular view the list of tables of that particular view from XML file two should be displayed in JSP Page.
    Are there any reference documents, regarding the above process please can anyone guide through how to do it.

    Let the servlet ask your business tier to provide the data, then stuff it into beans, and pack those into the Session instance. Then forward the request to the JSP, let the JSP get those beans and display them.

Maybe you are looking for