How to pouplute the sgtxt in MIRO using the customer modification ZXM08U29
Hi,
The SGTXT has to be populated from MIGO to MIRO using the user exist ZXM08U29.
I have tried populated the field e_sgtxt in the user exits but the changes are not appearing.
Any one already handled such senario please suggest.
Thanks in advance,
Deeplata
Hi,
I think that you are doing this in your coding of ZX* include in a LOOP for tab_drseg.
e_sgtxt = tab_drseg-sgtxt.
Set a break-point and check if this field is populated and what is the structure of lines of tab_drseg. Of course, check before that the enhancement is active and so on.
Regards
Eduardo
Similar Messages
-
How to create the custom infotypes in Campus Management
Hi,
Please help me how to create the custom infotypes in campus management.
Thanks,
Lakshmi.Hi,
Steps to create a HR Infotype:
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the 'Employee Infotype' radio button.
4) Select the 'PS Structure Infotype'.
5) Click on Create... A separate table maintenance window appears...
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on 'All' push button. It takes a few moments.
10) Click on 'Technical Characteristics'. Infotype list screen appears
11) Click on 'Change'(pencil) button
12) Select your Infotype and click on 'Detail' (magnifying glass) button
13) Give 'T591A' as subtype table
14) Give 'T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on 'Infotype Characteristics' ... Infotype list screen appears
18) Click on 'Change' (pencil) button
19) Click on 'New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement...
25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select 'Layout Editor' and click 'Change'.
27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Don't forget to 'Activate at every level)
Subtype Creation :
Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
Subty.text tab is T591S and time const tab is T591A.
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
HR related site:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Enhancement of Infotype
Check the following
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
Infotype Enhancement overview screen
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
Cheers,
vasavi.
kindly reward if helpful. -
How to create the custom table?
Hi, how to create the custom table and how to integrate the table with defferent R/3?
my requiremnt is i have to create the two tables and those i have to integrate with the existed R/3 and using those R/3 i have to update my custom tables .....can give me some idea?
Tks
DPkhow to create the custom table
There are two approach in creating a table.
1. Bottom-up approach
2. Top-down approach.
Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
6. Go to data element page and save, check and activate.
7. Go to main table page and save, check, and activate.
8. Also, you have to save the technical settings of the table.
The table is now ready for operation. You can use it in your program or you can use it to enter information.
Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
how to integrate the table with defferent R/3
Transport the Table to the another server/client/qas/prd
Kanagaraja L -
How to access the Custom Data type variable given in Expression edit control To and From LabVIEW
Hello, I would like to know how to access the custom data type variable given in the Espression Edit Control from LabVIEW and vice-versa
Say, the FileGlobals.Reference_Handle (Custom Data Type Variable) contains the
VISA I/O session (Which in turn contains VISA_DeviceName: String, Session: Number),
Channel1: Number and
Channel2: Number
I am expecting the user to give FileGlobals.Reference_Handle as the input at the ExpressionEdit Control in the edit screen of the VI Call.
I would like to know how to get the values of this custom data type to LabVIEW?
Say, if I have the Cluster in LabVIEW like VISA I/O session (Deive Name and Session Number), Channel1 and Channel2
how do i need to set this cluster to the Custom Data type variable in TestStand?
Thanks and Regards
PrakashHi,
TestStand to LabVIEW: i didnt understand what you r trying to achieve. But if you are using references, Use Property nodes and Invoke nodes to achieve what you want in LabVIEW.
LabVIEW to TestStand: check the image below: You need to click the button next to 'container'. I have used a cluster output in the VI.
Hope this helps
.......^___________________^
....../ '---_BOT ____________ ]
...../_==O;;;;;;;;_______.:/
Attachments:
1.JPG 187 KB -
How to display the customer VAT TIN number in the PLD
Hi All,
Can anybody tell me how to get the customer's VAT TIN number in the PLD.
Plz help me, i will reward u with max points.
Thanks,
Suresh YerraHi Suresh Yerra,
Pls do this.this will surely help you.
Go to concerned PLD. eg: AR Invoice
draw one database field.In table field use alt + click in drop down
this will give u all the tables in the database.
Now u choose the AR Invoice tax extension table - choose tax id 11 for TIN and tax id 1 for CST
like this yu can get any tax information.check the tax info. is filled in the BP master data ( accounting tab-tax information)
Reward points if helpful
Rgds,
Suresh Kannan -
How to see the customer purchase order acknowledgement ?
How to see the customer purchase order acknowledgement ?
in that PO ACK where we see the UOM and Qty ?
thanks & regards,
Srikanth.hi
Customer Purchase Order is nothing but the Sales Order in your system
Customer Po acknowledgement is nothing but the Acknowledgement that is sent out (output type BA00) to the Customer after the Sales Order has been created.
Note: Purchase is to Customer - Sales is to you as the Vendor.
cheers
Nandu
Edited by: Nanda Kumar Veeraraghavan on Apr 1, 2008 12:11 AM -
How to download the custom Tables to xls from the system?
Hi
How to download the custom Tables to xls from the system?
VijayHi,
Goto SE11, in the table name field give Z*, and click on display. You will get the list of Z tables.
Regards,
Prabu -
How to download the custom Reports to xls from the system?
Hi
How to download the custom Reports to xls from the system?
I know the t code SE38 for reports.
VijayHi
Here the programa name is nothing but a report name???
Vijay -
How to get the customized page's xml version ?
Hi All,
I have created some fields (of style 'MessageChoice', 'MessageLovInput') through personalization in a page and after that i navigated to the middle-tier where our MDS repository holding all the page's source file (in form of XXXXPG.xml) to get the updated version of the same page in xml version.
But i couldn't get the latest version of page's XML file instead i found the old standard file only.
Please help me in getting the file and guide me the path if it got stored somewhere in the architecture.
Thank You,
ThiyagarajanDear Anoop,
Thanks for your immediate response.
Could you please pour your ideas how to store the custom personalizations in Unix box through Functional Administrator responsibility ?
And one more question is as you said it will be stored in the form of xml but i have searched the page in the middle tier where it(standard one) got stored, but unable to find any one. How to find the xml file after doing the personalizations and in which path ?
Waiting for your reply.
Thank You,
Thiyagarajan -
HT201210 how to uninstall the unauthorized modification software?
how to uninstall the unauthorized modification software?
Can't really help you - what did you install in the first place?
Also, there is not really a lot anyone can do to help you if it was unauthorised in the first place. -
How to find the customer exits for a particular transaction
hi
how to find the customer exits for a particular transactionHi jyothsna vankadari ,
ther is a convenient way to find all BADIS called. You may know that BADIS are the newer version of EXITs.
I would suggest you to go for BADI.
Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction.
Regards,
Clemens -
How to check the Customizing setting in Different SAP CRM System
Hello Guru's
I want to know how to check the Customizing setting in Different system i.e (Sandbox,Development,Quality,Production)
I mean to say that i was to check all the 4 system are in same line in all the aspects or sink with each orther
Thanks in advance
With Regards
Sreeramhi
to synchronise all the clients in the CRM,u need to structure ur transport request,that is whenever a request has been made,the same has been transported to all the clients or not
Go to T-Code -SE09 and copy all released transport request from each client from Sandbox,Development,Quality,Production and match all request manually.
this is just a way other may be to see manually all the settings in all the clients
best regards
ashish -
How to find the customer ledger account display for profit centerwise
Dear All,
how to find the customer ledger account display for profit centerwise
Pleas give your valuable suggestion
Regards
Vishwajeet SharmaHi
check the tables
A959
A962
A997
The assignment depends on so many things
with respect to which transaction you wants the PRCTR field for KUNNR?
Regards
Anji -
Hi Apple,
I was developed an app that impemented In-App purchage,
But how I manage the customer to reinstall after the trial priod complets.
Thanking you.These forums are user supported.
So are the iOS Dev Center forums [ https://devforums.apple.com/community/ios ], although staffers do drop in as volunteers from time to time. -
How to check the customer class using CRM_PRICING_BADI...
Hello Experts,
I am using the said BADI in transaction CRMD_ORDER to check the
customer class and condition exclusion. What data do I need to use and pass?
Sorry since I am fairly new to CRM module.Hope you can help me guys.Thank you and take care!No answer...
Maybe you are looking for
-
Dissapeared videos & Mp3 files
Today dissapeared videos & Mp3 files in Video and Music App, files are available only via File Commander and Downloads, - no music- no content available and the same is in Video App -no items, empty folders. I've been using Lolipop for 2 moths, not a
-
Two Finger Right Click on late G4 iBook with USB Trackpad?
I learned that with OSX Version 10.4.7 it is possible to use the two-finger-click instead of ctrl-click for right-clicking. But this only works on the new Intel Macbooks/Pro. Well, this is nice. For older Laptops with ADB-Trackpad there is a freeware
-
Why do the Tool Bars not show when opening new window?
Here is a short jing video that clearly shows the issue http://screencast.com/t/epteOKIy
-
How to edit an existing pdf (only have pdf file)
Hello I have PageMaker for Windows version 7.01 and Adobe Distiller 5. A colleague created a pdf which I now need to edit. Unfortunately we have no access to original design documetn - only the end pdf. What is the easiest way for me to edit the pdf?
-
Use of Dummy material to issue Credit memo/ Debit memo
Hi Guys, Can I use NLAG material type to create a dummy material to issue Credit / debit memo? My requirement is to issue CM/ DM for the items that are not defined in material master. What should I consider from stocks/ accounting point view to imple