How to prevent IPV6 entries in DNS from server End

Hello,
My concern is to stop the IPV6 DNS entries being added to the DNS , but the main goal is to prevent it from the server end instead of going and disabling the IPV6 entries on each client machine.
I have gone through this article but my goal is to fix it from the server end
http://social.technet.microsoft.com/Forums/en-US/cd1a87f0-caf3-498e-9a20-e728e474b626/how-to-prevent-ipv6-addresses-from-being-registered-in-dns-server?forum=winserverDS
Looking forward for the reply.
Muhammad Asif Server Administrator Linux/Windows

Hi,
You can use Group Policy to disable IPV6 on clients within your domain, assuming you have an Acgive Directory environment.
There are ADM/ADMX templates that are actually doing this. You just have to import it on PolicyDefinition folder on one of your domain controller then configure a group opliy and link it to your structure.
http://social.technet.microsoft.com/wiki/contents/articles/5927.how-to-disable-ipv6-through-group-policy.aspx
Hope this help.
Regards,
Calin

Similar Messages

How to prevent a text in script from displaying if its value is zero

Dear all,
How to prevent a text in script from displaying if its value is zero
for eg   Price = 0.00
if price is 0 it should'nt appear in output.
I tried with    if price ne 0.
                   price = &price&
                    endif.
but it's not working.
Regards
Raj
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Jan 20, 2009 8:59 AM

Hello Nagaraju,
                       What you were doing is partially right.
The correct format to write in the script is as follows :
/: if &PRICE& ne 0.
&PRICE&
/: endif.
This should work. Let me know how it goes.
Nayan

HT1338 trying to download mountain lion OS, but whenever the net connection is broken it restarts from zero, how to prevent this and start downloading from the point it was disconnected

trying to download mountain lion OS, but whenever the net connection is broken it restarts from zero, how to prevent this and start downloading from the point it was disconnected

Disable anti virus software and try turning off the Firewall in System Preferences > Security & Privacy > Firewall.
Quit then relaunch the App Store. From the menu bar click Store > Sign In
Then click Store > Check for Unfinished Downloads

How can i dispaly an Error Message from Server Side To form

Hi All,
How can i dispaly an Error Message from Server Side To form side .
i try several ways nothing succed.
i put the error in stack and after call the procedure from form i added
Qms$Trans_Errors.Display_Messages;
and because it is an error not informantional error the error screen displayed and enter
in infinite loop acts like flashing .
can any one help me please i use C/S Headstart6i and Designer 6i
thanks alot
radi

hi,
thanks alot lauri.
yr code work only using information message but in error message its still the same .
the error window still flash and enter in infinite loop of executeing the same triggers.
thanks again
radi

How to prevent duplicate entry in Details block

Dear All
I am using Forms 10g.
I have a detail block.
There is a column called Ip_Address.
There i want to prevent duplicate entry .
How can i do this ?

hey i have a requirement that to restrict duplicate entry in both block(both multi record).the blocks are DEPT(MATER)
EMP(DETAIL)
the associated fieds in master block DEPT.DEPT_NO,in detail EMP.EMP_ID .
I have done' Kevin D Clarke’s calculated item ' both in master and detail block
its working fine for master block but in case of detail block its only respond to the current session(i.e. if the new value is inserted or save it will restrict another record to be inserted of that last record's value),it does not restrict duplicate value enter ,checking with other existing records(which are saved in earlier session,though after query it is shown on the form)
can anyone guide me why its not working

How to make Client instantly recieve msg from Server

Hello! I'm trying to make a multiplayer game via Bluetooth (RFCOMM protocol) in J2ME. I already managed to detect devices both as a client and as a server. I also managed to send real-time message from client(s) to server in the following way:
// Pauses thread until Transmission occurs
StreamConnection conn = notifier.acceptAndOpen();
read_msg(conn); //this is the function which reads the date received from client
But when I try the above as a client I got some exception, but never mind actually.
Here is the actual problem:
I want to be able to send a message from server to client whenever I press a key so that the client instantly receives that message.
Now the only thing that comes to my mind is to periodically check (i.e. every 50 ms) StreamConnection and watch for some changes like this.
while(true) {
InputStream input = conn.openInputStream(); // conn is of type StreamConnection
//now I check if the messege received is the new one OR have I actually received a message
// here I pause the Thread for i.e. 60 ms
But that would be extremely CPU heavy and foolish, wouldn't it?
So is there a smart way to register when client gets a message from server?
Please give me some example for client side.
Edited by: leden on Sep 27, 2007 3:07 PM

One more question.
I have a server and many clients. Let's say I had already received the first message from every client with this piece of code:
for(int current_client = 0; current_client < MAX_CLIENTS; ++current_client) {
//notifier is of type StreamConnectionNotifier
StreamConnection conn = notifier.acceptAndOpen(); //wait for transmission to occur
String response = read_msg(conn); //read_msg actually reads the message
Now, at some other moment I want to send a message to one of the clients .
How could I do that?
Do I have to add this command in the for loop above, perhaps?:
conn_client[current_client] = conn;
then simply reply by doing:
OutputStream output = conn_list[who_I_want_to_send_msg_to].openOutputStream();
and then the code like in my first post
OR this whole procedure is totally wrong?
Please explaim me what does openOutputStream() actually do?
Edited by: leden on Sep 30, 2007 8:51 AM

How to edit data in mtl_system_items_interface table from front end.

Hi All,
As i dont have create/update transaction permissions on mtl_system_items_interface from back end.
I need to update the failed records in mtl_system_items_interface and reprocess them again.
Kindly suggest mr how to proceed from apps front end to query and update.
Thanks in advance
Regards
Santosh

Hi Santosh,
I think there is no front-end access to reprocess the failed records.
For help, some useful Metalink Notes are:
FAQ for Item Import [ID 109628.1 ]
A Guideline to IOI Error Messages and Solutions [ID 52746.1]
INCOIN: Basic Steps for Researching Failed Item Imports [ID 552683.1]
Understanding Item Import and Debugging Problems with Item Import [ID 268968.1]
Item API Or Concurrent Manager, Which One Is Best For Item Creation? [ID 760498.1]
reagrds
Sanjay

How to remove AM extension and substitution from server

Hi,
Can somebody please tell me how to remove existing subsitution and extension of AM from server.
Regards
Swati

Swati,
You can delete the substitution by using an API jdr_utils.deletedocument('<path>').
The path will be like 'oracle/apps/ap/xx/customizations/0/server/...'
Regards,
Gyan
Edited by: Gyan on Jun 3, 2011 7:28 PM

How to deploy coldfusion as mvc framework from server standpoint?.

Does anyone know how to deploy mvc framework from server
standpoint?. I have all my business logic as cfcs but I want to
move them to different server so that my cfm code is in one server
and my cfcs are in another. Has anyone done this or point me in the
right direction?.

Marc E wrote:
> we've actually been trying to go in the opposite
direction, mostly for ease
> of deployments. we have a cluster of CF servers, and
every time we do a code
> push, we have to migrate to all servers. it's annoying
and prone to
> problems.
Actually that's exactly the way we have our new high
availability
environment configured. All the code runs off an EMC device.
Not sure
why I didn't draw this parallel yesterday with running the
CFML on one
server and the CFCs on another server--as long as you have a
sufficiently fast network (we're on gigabit) and
device/drives (our
stuff is fiber channel), then as you mention below
performance probably
isn't an issue. I'd be curious if doing this over 100 megabit
with more
low-end hardware would perform as well as having things on a
local
drive, however.
> We want to move all our code onto one machine, such that
no webserver has
> any code on it at all. we deploy code to one machine,
and all webservers on
> the cluster benefit from the push. this machine is not
web accessible at all
> and thus one could say less prone to security problems
than a webserver is,
> although i'm not sure that's such a good reason. mostly
for us it's ease of
> deployment.
Yep, very true, and although the NAS/DAS device isn't
*directly*
accessible via the web, remember that's it's accessible by
the user
that's being used by the web site users, so there isn't a
huge security
benefit here vs. having the code locally. You're absolutely
right
> separating normal cfm files from objects seems kind of
silly, when if you
> want security you'd put all code on a separate,
non-web-accessible machine.
Yeah, this is where we head was earlier in the
discussion--putting the
CF "pages" on one server and the CFCs on another just seemed
a bit wacky
to me.
> thanks to CF mapping, you can just point "/" to the code
root of hte machine
> on which the code lives, and all is well with the world.
> This is actually how we have our internal environment
set up, it's just our
> production environment where our host is a pain in the
*** about it.
Right, this is what we do on our production environment but
we don't
even use a CF mapping (though you could). We just point our
web server
to the EMC device and everything else just falls into place,
provided
you've set up the user CF and your web server process (or
using "connect
as" in IIS in W2K3) are running as so they have access to the
network
storage device.
> i'd be extremely surprised to see a performance problem
with this setup.
> It's not like the web servers are in philly and the code
servers are in
> taiwan, sending thousands of bytes per second. you've
probably literally got
> the webserver sitting right beside the server on which
the code lives. it's
> virtually the same thing as just keeping CF on the C
drive and all the code
> on the D Drive (assuming disk speeds on the machines are
adequate).
True, good point. We have extremely good performance (might
even be
*faster* than local drive speed) with our EMC device, and
again I'm not
sure why I didn't see this parallel yesterday in the
discussions. Blame
it on a very hectic week. ;-)
Matt
Matt Woodward
[email protected]
Adobe Community Expert - ColdFusion

How do i stop iPad deleting emails from server

Hi - I am using a Ipad Air and am having an Email issue. When I delete on Ipad it automatically deletes on Server. This never used to happen. I have tried all the usual of changing the Advanced setting but still no joy. Any Ideas? BTW using BTinternet.

I have same problem too. Does anyone know solution an "never delete from server
" option is not available

How to refresh a client's browser from server without using Timer !

Hi,
can anyone have the code for refreshing the client's browser from server side with out setting the timer . U can do this by setting the Timer from server. but we need some other solution for this problem.
Thanks.

There's a meta tag for it.
Kind regards,
Levi

How to delete unused entries in the FROM selectbox in mail.app

Hi,
In the FROM selectbox in mail.app I find entries, that are not in the accoutlist and that are not in the list of the smtp accounts.
How can I get rid of them
Tnx
Micho

Oh sorry. I just found it. My french system is not always helping me.

How to prevent middle names and titles from appearing in contacts

My iPhone is syncrhonised with MS Outlook, and I've used Outlook as my system of record for contacts for many years. I have hundreds of contacts in Outlook, many of which contain middle names and titles.
The problem is that the iPhone displays every contact as Title FirstName MiddleName Surname Suffix. For many of my contacts, particularly when viewed in the Favourites list, I can't even see the contact's surname because the contact's title, first name and middle name(s) take up so much of the row.
How can I stop my iPhone from displaying titles and middle names? Is there a setting somewhere in iTunes that will prevent these fields from being transferred to the iPhone?

@NFH
I am also experiencing this problem, but I think it started with one of the later iOS 3.x releases or possible iOS4. All of my contacts display their job title (eg. "Senior Vice President of Worldwide Sales & Operations") which given the screen real estate means that NONE of the actual Contact name is visible.
This is only happening on my iPhone 3GS (iOS 4.0.2) and does NOT happen on my Mac, my me.com, nor on my iPad (iOS 3.2.2). Which, again leads me to believe this problem was introduced in iOS4.

How to prevent Pivot Table Data Source from being changed automatically?

I have an excel file that contains a Pivot Table that references a table within the workbook (Data Source = "MyTable"). When I save the file and copy it, the copy contains a reference to the original file. Instead of displaying, "MyTable",
it shows "OldFilename!MyTable" where OldFilename is the name of the original file, not the current file.
How do I prevent this from occurring. It is only doing this on my current machine, if I perform these steps on a different machine, the problem does not occur and the Data Source property stays the same as it should.
What setting(s) do I change to fix this problem?
Thank you in advance for your help!
Michael

Hi Michael,
How about the issue now, is it solved?For the 'data model' feature,please refer to:
http://blogs.office.com/2012/08/23/introduction-to-the-data-model-and-relationships-in-excel-2013/
let us know if you have any additional questions or concerns.
Best regards,
Wind

How do I stop my router DNS from being changed?

Hi all,
I did a search on this but none of the discussions really matched my problem.
Anyway, a few weeks ago I had problems with an Android device that refused to take app updates. I rebuilt the thing several times to no effect. At that point I gave up, and tried to google the problem to see if anyone could help. Then I discovered that I couldn't connect to google.
It turned out that some evildoer has somehow managed to change the DNS in the DHCP section of my router (or Mac Network settings?).
I quickly logged into my router (which already had a custom password), and changed the DNS servers back to the Google public ones.
I also changed the router admin password to a new, longer one.
Today I discovered that the DNS has been changed back again to 162.248.99.162 which is presumably the bad guys' server.
I thought I'd dealt with this by resetting and changing back to Google and choosing a new password.
So now I'm wondering if there's something on the Mac that is allowing some third party to change my DNS settings. I have ClamXAV but that's the only security software I use. I don't know how to find out if there is some DNS changing malware on my Mac, or to what extent my security has been compromised. Any ideas?
Thanks in advance.

Thanks MadMacs.
You need to make sure that you have disabled the ability to reconfigure your router from the WAN (Internet) side.
I am not sure how I do that. Where might I find that setting and what would it be called, typically?
Also check to see if your router is one of many that require new firmware to overcome known vulnerabilities that allow WAN access without a password.
My router is some ancient Huawei jobby that my old ISP gave me. I tried searching for firmware updates but the model number is not even listed, which is either because it's so old it's no longer supported or because it was a model only supplied to ISPs for their customers. Maybe I just need to get fibre broadband and a new router.

How to prevent IPV6 entries in DNS from server End

Similar Messages

Maybe you are looking for