How to print 4 copies of smart from in a single print

Dear All,
i have one smartform. i have attached my smart form to an output type. if i am printing through that output type, it has to print 4 copies of smartform. Hoe to do this?
i have 6 windows in my smart from in different different place. i have used main window for my table data inthe middle of the smart from.
How can i print 4 copies of smart from in a single print ?
Thanks In advance.

Hi Vishnu,
I hope you have used a print program which will be triggered from the output type.   In your print program where you are calling your smartform, just include that piece of code inside DO 4 times.
                                                                                ........... Write the code here to call your smartform.
                                                                                ENDDO.
I hope by doing this you will be able to achieve your requirement.
BR,
Vinit

Similar Messages

How to print BAR CODE in SAP SMART FORMS

Hi,
I want to print inspection lot's BAR CODE in the smart form, but i dont know the way how to print this into the smartform.
if anyone have any idea, please suggest me how to print this as it is urgent for me to complete the object.
Thanks in advance.
Best Regards,
Abnish Jain

Hello Abnish,
Welcome to SDN.
We are able to print barcodes from smartforms. Doing this way, we print barcodes on laser printers.
We are also printing from sap to zebra printers using two ways:
1. Download the data to an excel sheet, then creating a macro that opens the printer port and sending the commands to the printer through this "file". All this is done via vb script provided with excel)..
2. The second way is creating a vbscript (an ascii file from sap) with the printer commands and then runing it using ws_execute.
You need a barcode reader to read the barcodes, and this scanner acts like a keyboard, it sends the data scanned to the active field on screen. (which might be a notepad, word, excel or an input field or ... ).
From 4.6c on, you can use smartforms to print barcodes without buying any barcode.dll software nor hardware extention like Bardimm on any laser/inkjet printer (Please Note that I haven't mentioned Zebra printers here!). To do this, you have to create a smartstyle -> character format with the desired barcode font (defined within sap). Then in the smartform, create a window, put the field and associate it the character format. That's all (I mean, that's all we do at least :-). I think, you have to consider the barcode specifications before sending the barcode value to the smartform (Just an example, if you're using 3 of 9, the code should start and end with an asterisk - '*' -) We're printing an interleaved 2 out of 5 barcode in our invoices due to a legal requirement, and we did it this way.
3. If you have a barcode scanner, then you should not need reading the barcode into an ascii file to get the data read in an standard or custom screen field. You can read it directly to the field you want. (unless... you have complex data coded in the barcode - for example if you're using an ean-ucc 128 compliant code and you're sending several fields in a single code ... In this case, an interface is almost mandatory because you must interpret the data fields according to the ucc standard, split the code into several fields .... and .... pure programming logic ).
To put it clear: if you have to read, for example, a barcode that holds the legal number of an invoice using a barcode scanner and this number should be sent to migo-> bktxt then you don't need an interface. The scanner itself acts like a fast operator entering the characters using a keyboard and filling in the field.
We're reading barcodes in several places (when we finish each pallet, when we receive an invoice, and so on. Each case is a different screen. We arent using an ascii file to read these barcodes. Furthermore, we read the invoice legal number into migo bktxt field (Head Text).
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
Regards
Naren

How to make blank copies of a PDF file and put it into the printer tray.

Dear experts,
Before you try printing the data from the FM, How tomake several blank copies of the PDF file and put it in the printer tray so that you can print just the data from the function module on it??????
Please reply.

Hi drredwood,
When you open your PDF file a yellow bar will appear on the top of the screen.
Click on 'Enable All Features'.
Then you will be able to copy the content from your pdf and to paste in any of the file.
Regards,
Florence

How to print from a planning view in APO SNP ?

Does anybody know how to print on paper from the planning view in the planning book.
I have made a view with a key figure.
In the view, I can see the productnumber, the key figure and the values.
Some users want to print it on paper.

Hi,
CSV method of download is the SAP standard format for saving the
files.
You can either create your own custom logic for saving in excel or
use BW functionality for extracting the required fields and form a
report to save & print in excel
Regards
R. Senthil Mareeswaran.

How can I prevent a PDF file from being copied, printed or downloaded? Students should only be able to view the text and and not distribute it in any way.

How can I prevent a PDF file from being copied, printed or downloaded? Students should only be able to view the text and and not distribute it in any way.

You can prevent it from being printed by applying a security policy to it
in Acrobat. The rest can't be prevented, unless you spend a LOT of money
on DRM protection.

How to print double sided from my Mac to my Canon MG6350

I have looked up everywhere on the internet and youtube of how to print double sided from my Mac Book Pro. I am using OSX 10.8.5.
All of the dicussions I have looked up before have told me to go to System Preferences>Print & Scan>Options & Supplies> Driver and then tick the little box that comes up and it will allow you to print double sided. I have tried doing this but THERE IS NO DRIVER TAB!!!
I was just wondering if there was a solution to this as I can print double sided from my other appliences, like the PC and iPad, it is just my Mac Book Pro that doesn't work.
It has become a big problem for me as I'm studying at college and I need to print things double sided quite regularly. I really need this to work.

The print dialog has several drop-down menus, one of which initially shows the name of the application you're printing from. If the printer supports duplex, you can choose
Duplex Printing & Margin
from that menu. You should then see a checkbox marked
Automatic Duplex Printing

How can print a report from form 6i, when I press a button?

hi Friends,
How can print a report from form 6i, when I press a button?
When i press a button from Form 6i, the report should print through printer.
I have done it by using report parameter DESTYPE Printer but problem is that when I press a button printer dialogue box appear and then I give command Print to printer, I don’t want to show Printer dialogue box.
I want when I press a button form Forms 6i , printer will print my report directly.
Please send me the solution of this problem.
Best regards,
Shahzad

Hi
If You are using Client server application then to passing to Add all Print Parameter in the Host Command.
Means Print command in unix to Host(lp.............) and Other Parameter to file name of the report to print.
If You not Use Client Server Application the Also Passing a Host Command in Button-Pressed Event and Run.

How to print multiple copies on one page ?

How to print multiple copies of one document on one page ?
in coreldraw I used to make the document -for example a business card 5x9 - and when sending to print it automatically placed the number of cards that would fit in my A4 sheet.
how do I make the same operation in Indesign.
thanks

Hi, Peter S.
>I can see that as a shortcut to printing a page of different cards for multiple people, but to do a simple n-up of a single card it seems overly complex to me. What am I missing?
* It's just an alternative to copy/paste and step/repeat.
* For a one-time only use, perhaps it's a little more complex than necessary. But for any future needs, only the content of the data file needs to be changed, either by editing, or by pointing to a new data file. If different cards for multiple people becomes necessary, it's ready to go.
Regards,
Peter Gold
KnowHow ProServices

How to print multiple copies of same image (with specific fixed dimensions) on single page

I am using Photoshop Elements 10 on Win 7 PC. I am trying to print multiple copies of one image on a single 8.5x11 sheet of paper? The images are artwork for buttons (to be used in button-making machine) so the dimensions must be exact on the duplicated images. When I select Picture Package, the images are resized to fit the dimensions in the picture package. When I select Contact Sheet, the images are resized to fit the number of columns I selected. Neither is acceptable. How can I repeat the same image on a single piece of paper without having the system re-size the image? I know that I can manually create a new PSE file and manually insert the images into this file. This is what I have been doing as a work-around. But I would hope there is a better/faster way.
Thank-you!

A variation of hatstead's method where the pictures are precisely aligned:
1. Add the picture to the blank file as hatstead described. Use the Move tool to position the picture in the upper left corner.
2. Duplicate the layer. Use the arrow keys (NOT the mouse) to move the new layer to the right.
3. Repeat step 2 until the row is filled:
4. Merge Down the 3 layers into one. Alternatively, link the 3 layers and do a Merge Linked as in this example. The end result is the pictures in the row are on one layer:
5. Duplicate the layer and use the arrow keys to move this down to the 2nd row.
6. Repeat step 5 to create additional rows.
7. Finally, to center the whole thing on the sheet, link all the row layers and position with the arrow keys.
Note that you can also custom-make your own Picture Package. Instructions for this should be somewhere in Help.

How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp

How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp? So far when I try to disconnect the external HD from the mbp, I get the following pop up window: The disk "external hard drive A" couldn't be ejected because "Lightroom" is using it. Quit that application and try to eject this disk again. When I do that and restart Lightroom 5, the Adobe Photoshop Lightroom - Select Catalog screen pops up but doesn't list my external hard drive A as a choice.
I've reviewed Adobe's Lightroom Help | Smart Previews Lightroom 5 web page and still haven't been able to figure what I'm doing wrong. Any help would be appreciated.

Your internal HDD. by default, is named 'Macintosh HD'. From what information you supplied, it looks like there is already a Lightroom catalog installed on you local (internal) HDD using the standard naming convention Adobe uses as well as a Lightroom catalog on your external drive which you created. To be sure of which catalog Lightroom is loading when it starts up, To do this, start Lightroom as you normally would. After it starts, select the Lightroom menu item, then select the Catalog Preferences item and finally, navigate to the General tab. The Location information will tell you exactly what catalog Lightroom is opening by default. This will likely be the Photography Mac Book Pro Versions catalog on your external HDD. Once that is confirmed, you are ready to proceed. As an additional test/verification, you can shut down Lightroom and, this time, start Lightroom while holding down the ALT/OPTION key. This will cause Lightroom to pause and display a screen which will allow you to chose a different catalog to open. Navigate to the /Users/[user name]/Pictures/Lightroom folder and select the Lightroom 5 Catalog.lrcat file. When Lightroom comes up, there should be no previews or folders as this catalog should be empty. Now you can be certain which catalog is being used and which catalog has all your data and you are ready to migrate your current catalog. Shut down Lightroom.
To migrate your current catalog, use Finder to locate your Photography Mac Book Pro Versions folder on your external drive. Select the folder and select COPY from the context menu. Next, use Finder to navigate to the /Users/[user name]/Pictures/Lightroom folder on you internal HDD. You can start at the Macintosh HD level and work your way down by opening each level (Macintosh HD/Users/[user name]/Pictures). Select the /Pictures folder and then select PASTE... from the context menu. When the COPY/PASTE is complete, you should see the following files on the Macintosh HD:
Macintosh HD/Users/[user name]/Pictures/Lightroom/ and
Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions
The Macintosh HD/Users/[user name]/Pictures/Lightroom folder will contain the empty default catalog the Adobe created when Lightroom was installed and Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions will contain a copy of the catalog you created on your external HDD.
You are almost done now. Make sure your external drive is still attached for this step. Restart Lightroom using the ALT/OPTION key again. When the Select Catalog screen appears, select the Choose a Different Catalog button (lower left side). When you do, a Finder window will open to allow you to navigate to a catalog of your choosing. Navigate to Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions and select the file Photography Mac Book Pro Version.lrcat. This is the copy you just created. Select the Open button and Lightroom should start. You should see all of your previews and settings just as before. Also, in the left hand panel, all of your folder should show up and none of them should be dimmed and none of your previews should display a small exclamation point badge. Either a dimmed folder name or an exclamation point badge indicates that Lightroom can't find the associated image file. If everything looks good, go to the Lightroom menu, select Preferences and then select the General tab. Under Default Catalog, select an option to either load the LAST catalog opened or select the Users/[user name]/Pictures/Photography Mac Book Pro Versions catalog from the drop down. Shut down Lightroom and then restart it normally. This time, when Lightroom starts, you should be viewing the new copy of your catalog. You can confirm this by looking at the General tab on the Catalog Preferences screen (Lightroom/Catalog Preferences menu items). Shut down Lightroom once again and this time, eject your external drive before restarting. This time, your folders in the left hand panel will be dimmed but you should be able to work with your smart previews. If Lightroom should display a Select Catalog screen with the external drive detached, double check your settings as it indicates Lightroom is still looking at the copy of the catalog on the external drive rather than the new copy you made.
Finally, if you are seeing dimmed folders and/or exclamation point badges with the external drive attached, this indicates a problem. You can select any folder and select Update Folder Location from the context menu. This will allow you to navigate to the copy on the external drive and select it. Lightroom will then update the catalog (select to synchronize the content). This will not only clear the dimmed folder problem but also remove the exclamation point badges for all photos in that missing folder. However, it may indicate that not all went well with the copy of the catalog so make sure to verify all went well. You can use the Get Info option on the two folders. You should see the same number of files/folders for both the copy on the internal drive as well as on the external drive but you can't rely on the byte count because of the possibility of differences between the geometry of the two drives. Hope this all helps!

How to print report from JSP Page

Hi Everybody,
I am developing a simple project in JSP with MS Access. I hav some tables and reports for them. I hav a JSP page which gets inputs from user and save it in the table. Its working fine. But my problems are,
1) I hav a button called "SAVE & PRINT" in that bottom of the page, if i click that button, the currently entered data has to save in the table and the same data has to print from the MS Access report. I dont know how to print this report from JSP page.
2) Another button called "REPRINT". If i click that button, it has to ask a number to print the report page, that number is nothing but a field in that report.
Could anyone help me to solve this problem.

Hi Everybody,
I am developing a simple project in JSP with MS Access. I hav some tables and reports for them. I hav a JSP page which gets inputs from user and save it in the table. Its working fine. But my problems are,
1) I hav a button called "SAVE & PRINT" in that bottom of the page, if i click that button, the currently entered data has to save in the table and the same data has to print from the MS Access report. I dont know how to print this report from JSP page.
2) Another button called "REPRINT". If i click that button, it has to ask a number to print the report page, that number is nothing but a field in that report.
Could anyone help me to solve this problem.

Does anyone know how to print a text message from a bill?

Does anyone know how to print text messages from a phone bill or view them?

There might third party apps or iTunes or iCloud options to backup the text messages from the Apple phone itself. Then you can print the contents of the messages from the backup.
There are similar applications for Android devices as well.

How to print different copies in sap Script

Hi experts,
I am developing the excise Invoice. For this I copied standard print program as Zprogram and Standard Script also.So I can change the ITCPO structure with three copies. But how to check these copies to print each copi with different headings?. what is required code to write in my Script?
T

Look at my question =>How To Get Control once Second Print Is Issued to printer in Script
This might give you some hint.

How to print different pages of sap script from diff. trays of printer

Hi All,
I have the requirement in SAP script. How to print different pages from different trays in the printer.
For example page 1 logo and address has to print from tray-1,
page 2 main data print from tray-2,
page 3 footer data print from tray-3.
will appreciate if u come up with solutions asap.
Thanks in advance.

Hi,
May be the links given below might help you,
SAPScript:Selecting Different Tray in SAPscript
Print to different output tray in SAPscript/Print Workbench
Regards,
Hema.
Reward points if it is useful.

How to print from iPhone 3GS with OS 4.2.1?

Hello,
I have searched and read through the discussion forums, but I'm not sure I understand how to print from my iPhone.
In reading the manual for the iPhone 3GS, specifically on page 44, it says the following:
AirPrint uses your Wi-Fi network to send print jobs wirelessly to your printer. iPhone must be connected to the same wireless network as the AirPrint printer.
My HP printer (Officejet Pro L7555) is plugged into my Airport Express so that I can do wireless printing. (I am also using an Airport Extreme for the WiFi network in my house).
When I have, for example, an email on my iPhone that I am reading, if I tap the "reply" button, I do see the "Print" option appear. When I tap on "Print", it brings up a screen where it says, "Select Printer". I then tap on that, and it will then say, "Looking for Printers".
The final outcome is "No Printers Found".
Since I am following the instructions on wireless printing as found on page 44 of the iPhone 3GS handbook (with OS 4.2.1 software), I'm not sure what it is that I'm doing wrong. I can print wirelessly with my iMac and my MacBook Pro to my HP printer just fine. Everything in my home is on the same network (my iPhone, iMac, iTouch, and MacBook Pro) that the printer is on.
I'm sure I'm missing a big chunk of the puzzle somewhere that the manual is missing. Can someone please let me know what additional steps I must take in order to print from my iPhone 3GS while I am at home on my own network?
Thank you very much.

From one Andy to another Andy (LOL):
Okay, thank you for the information. I even searched the Store web page before asking my question, and somehow missed this.
Well, I'm not about to go and buy ANOTHER Apple toy just to print from my iPhone. For now, I think I can stick to the old-fashioned way and just forward it to myself so that I can print it from the iMac. I just got Apple TV a few days ago, so I'll have to wait a little bit for the next toy.
Thank you very much for the prompt answer.
Andy Smith
Pleasanton, CA

How to print 4 copies of smart from in a single print

Similar Messages

Maybe you are looking for