How to print a report on A3 page instead of A4?
Hi all,
I have an RDF report which is printing on A4 size page, but now I wnat to print same report on A3 size page. My question is. Is it possible to change the paper size from A4 to A3 if yes how can i do that. Please guide me.
Regards,
Roshan
You can change the size of the layout by choosing the desired section (e.g. the "main section") in the object-navigator under the node "Paper Layout" and then change the width and height properties in the property palette to the appropiate values.
Similar Messages
-
How to print a report in half of the A4 page
Hi,
Please help me, how to print a report in the half page of the A4 size paper.
Thanks,Hi
If you are using the command MEW-PAGE PRINT ON
then we can give this layout options
like
NEW-PAGE PRINT ON
DESTINATION <printer name>
immediately 'X'
KEEP IN SPOOL 'X'
LAYOUT 'X_65_132' (OR X_65_255)
RECEIVER SY-UNAME
NO-DISPLAY.
OTHERWISE WHEN YOU SELECT THE PRINTER
IN THE PRINTER PROPERTIES/SETTINGS BASICS-> PAPER
you will have this facility to select LANGSCAPE/PORTRAIT
use that and print
Reward points for useful Answers
Regards
Anji -
How to print multiple footers for each page in RTF template xml report.
Hi,
How to print multiple footers for each page in RTF template xml report.
i am able to print ( two sets ) ...
up to last page ( one template ) and for last page ( another template).
i want to change the footer information based on the group value printed in the report ( it might be 5 to 6) In every report run.. can you please check and let me know do we have any feasibility to achieve this.
Thanks in advance.
Regards,
KAP.You can remove all other logic, like last page only contents (start@last-page:body), etc and section breaks if any you have inserted manually.
Just have for-each@section logic.
It would be difficult for me to guess what you have done without looking at your RTF or describing here. -
How to print all columns in one page
Hi,
Can anybody explain me how to print all columns in one page.we have around 15 to 20 columns for 4 reports and all these reports are build on one multiprovider.we are using BW 3.5.
Can anyone explain me how to print ALL COLUMNS IN ONE PAGE .currently they are getting all columns in 2 to 3 pages. They are using PORTAL to run the reports here.
Is it possible to do by customizing Webtemplate or by macros in Workbook.Please help me
Edited by: kotha123 on Oct 11, 2010 5:58 PMHi,
Your best bet is to use a workbook template or else Excel to pdf option...Thanks -
Hi,
Currently, we are using crystal report to all of our reporting applications, but since I/users have encountered some issues about CR's speed to load only a simple report, maybe it is now time for us to adopt a new reporting environment in which I think SSRS
can fill this problem.
To start with, I have here a sample code, that uses the crystal report to print the report directly without previewing:
csCashInvoiceCal csCashCal; --Crystal report name .rpt
dsCsReceipt dsCs; --created dataset
DataTable u;
DataRow s;
private System.Drawing.Printing.PrintDocument printDocument1;
private System.Windows.Forms.PrintDialog printDialog1;
ParameterValues paramValue;
ParameterDiscreteValue discreteValue;
ParameterFieldDefinition fieldDefinition;
private void btnPrint_Click(object sender, EventArgs e)
this.Cursor = Cursors.WaitCursor;
loadReceipt2();
print2();
csCashCal.Close();
this.Cursor = Cursors.Default;
private void loadReceipt2()
dsCs = new dsCsReceipt(); --created dataset
u = dsCs.Tables.Add("DtCsReceipt");
u.Columns.Add("Qty", Type.GetType("System.String"));
u.Columns.Add("UOM", Type.GetType("System.String"));
u.Columns.Add("Description", Type.GetType("System.String"));
u.Columns.Add("UnitPrice", Type.GetType("System.String"));
u.Columns.Add("Discount", Type.GetType("System.String"));
u.Columns.Add("Amount", Type.GetType("System.String"));
try
for (int i = 0; i < dgvDesc.Rows.Count - 1; i++)
s = u.NewRow(); double.TryParse(dgvDesc.Rows[i].Cells[Discount2.Name].Value.ToString(), out discount);
s["Qty"] = double.Parse(dgvDesc.Rows[i].Cells[Qty.Name].Value.ToString());
s["UOM"] = dgvDesc.Rows[i].Cells[Uom2.Name].Value.ToString();
s["Description"] = invcode + dgvDesc.Rows[i].Cells[Description.Name].Value.ToString();
s["UnitPrice"] = dgvDesc.Rows[i].Cells[UnitPrice.Name].Value.ToString();
if (discount != 0)
s["Discount"] = "(" + string.Format("{0:0.##}", discount) + "%)";
else
s["Discount"] = "";
s["Amount"] = dgvDesc.Rows[i].Cells[Amount2.Name].Value.ToString();
u.Rows.Add(s);
catch (Exception) { }
csCashCal = new csCashInvoiceCal();
csCashCal.SetDataSource(dsCs.Tables[1]);
//csCashCal.Refresh();
loadParameter2();
private void loadParameter2()
ParameterFieldDefinitions paramFieldDefinitions;
paramValue = new ParameterValues();
discreteValue = new ParameterDiscreteValue();
paramFieldDefinitions = csCashCal.DataDefinition.ParameterFields;
discreteValue.Value = date;
fieldDefinition = paramFieldDefinitions["Date"];
commonParam();
discreteValue.Value = txtcsno.Text;
fieldDefinition = paramFieldDefinitions["InvoiceNo"];
commonParam();
discreteValue.Value = txtNameTo.Text;
fieldDefinition = paramFieldDefinitions["CustomerName"];
commonParam();
discreteValue.Value = txtAdd.Text;
fieldDefinition = paramFieldDefinitions["CustomerAddress"];
commonParam();
------other parameters----
private void commonParam()
paramValue.Clear();
paramValue.Add(discreteValue);
fieldDefinition.ApplyCurrentValues(paramValue);
private void print2()
using (printDocument1 = new System.Drawing.Printing.PrintDocument())
using (this.printDialog1 = new PrintDialog())
//this.printDialog1.UseEXDialog = true;
this.printDialog1.Document = this.printDocument1;
DialogResult dr = this.printDialog1.ShowDialog();
if (dr == DialogResult.OK)
int nCopy = this.printDocument1.PrinterSettings.Copies;
int sPage = this.printDocument1.PrinterSettings.FromPage;
int ePage = this.printDocument1.PrinterSettings.ToPage;
string PrinterName = this.printDocument1.PrinterSettings.PrinterName;
try
csCashCal.PrintOptions.PrinterName = PrinterName;
csCashCal.PrintToPrinter(nCopy, false, sPage, ePage);
printcount++;
//saveCountPrint();
catch (Exception err)
MessageBox.Show(err.ToString());
This is only a simple sales receipt application that uses dgv and textboxes to push its data to dataset to the crystal report, a simple one but there are instances that it is very slow.
But I'm having trouble implementing this using SSRS, since I'm only new to this one, wherein I created the report using report wizard, with two button options inside the form for print preview or direct print selection. Actually, it is very easy to implement
with print preview because it uses reportviewer. My problem is that how can I print the report directly without using a reportviewer?
So here is my code so far which I don't know what's next:
private void button2_Click(object sender, EventArgs e)
this.Cursor = Cursors.WaitCursor;
loadReceipt3();
//print3();
this.Cursor = Cursors.Default;
ReportParameter[] parameter = new ReportParameter[11];
private void loadParameter3()
parameter[0] = new ReportParameter("InvoiceNo", txtcsno.Text);
parameter[1] = new ReportParameter("Date", date);
parameter[2] = new ReportParameter("CustomerTin", txtTin.Text);
parameter[3] = new ReportParameter("CustomerName", txtNameTo.Text);
parameter[4] = new ReportParameter("CustomerAddress", txtAdd.Text);
parameter[5] = new ReportParameter("Agent", agent);
parameter[6] = new ReportParameter("Discount", "Discount: ");
parameter[7] = new ReportParameter("TotalDiscount", lblDiscount.Text + "%");
parameter[8] = new ReportParameter("TotalSales", rdtotal);
parameter[9] = new ReportParameter("Tax", rdtax);
parameter[10] = new ReportParameter("TotalAmount", rdnet);
private void loadReceipt3()
DataSet dsrs = new DataSet();
DataTable dtrs = new DataTable();
DataRow drs;
dtrs.Columns.Add("Qty", Type.GetType("System.String"));
dtrs.Columns.Add("UOM", Type.GetType("System.String"));
dtrs.Columns.Add("Description", Type.GetType("System.String"));
dtrs.Columns.Add("UnitPrice", Type.GetType("System.String"));
dtrs.Columns.Add("Discount", Type.GetType("System.String"));
dtrs.Columns.Add("Amount", Type.GetType("System.String"));
try
for (int i = 0; i < dgvDesc.Rows.Count - 1; i++)
drs = dtrs.NewRow();
drs["Qty"] = double.Parse(dgvDesc.Rows[i].Cells[Qty.Name].Value.ToString());
drs["UOM"] = dgvDesc.Rows[i].Cells[Uom2.Name].Value.ToString();
drs["Description"] = invcode + dgvDesc.Rows[i].Cells[Description.Name].Value.ToString();
drs["UnitPrice"] = dgvDesc.Rows[i].Cells[UnitPrice.Name].Value.ToString();
if (discount != 0)
drs["Discount"] = "(" + string.Format("{0:0.##}", discount) + "%)";
else
drs["Discount"] = "";
drs["Amount"] = dgvDesc.Rows[i].Cells[Amount2.Name].Value.ToString();
dtrs.Rows.Add(s);
catch (Exception) { }
int addtlRow = 7;
if (addtlRow > (count - 1))
addtlRow = addtlRow - (count - 1);
for (int i = 0; i < addtlRow; i++)
dtrs.Rows.Add();
loadParameter3();
LocalReport localreport = new LocalReport();
localreport.SetParameters(parameter);
localreport.DataSources.Clear();
localreport.DataSources.Add(new ReportDataSource("dsSalesReceiptSsrs", dtrs));
localreport.Refresh();
//what's next....
So what's next after local..refresh()? Actually, I have googled a lot but I didn't found the exact solution that I'm looking for which confuses me a lot.
Anyway I'm using VS 2010 with sql server 2012 express.
You're help will be greatly appreciated.
Thank you,
HardzAfter some further studies with ReportViewer controls and with the use of this tutorial @ : http://msdn.microsoft.com/en-us/library/ms252091.aspx, which helps me a lot on how to print a report without using a report viewer, I found out what is missing
with my code above and helps solve my question.
Here's the continuation of the code above:
private void loadReceipt3()
loadParameter3();
LocalReport localreport = new LocalReport();
localreport.ReportPath = @"..\..\SsrsCashReceipt.rdlc";
localreport.SetParameters(parameter);
localreport.DataSources.Clear();
localreport.DataSources.Add(new ReportDataSource("dsSalesReceiptSsrs", dtrs));
Export(localreport);
print4();
private IList<Stream> m_streams;
private int m_currentPageIndex;
private void Export(LocalReport report)
string deviceInfo =
@"<DeviceInfo>
<OutputFormat>EMF</OutputFormat>
<PageWidth>8.5in</PageWidth>
<PageHeight>11in</PageHeight>
<MarginTop>0.25in</MarginTop>
<MarginLeft>0.25in</MarginLeft>
<MarginRight>0.25in</MarginRight>
<MarginBottom>0.25in</MarginBottom>
</DeviceInfo>";
Warning[] warnings;
m_streams = new List<Stream>();
report.Render("Image", deviceInfo, CreateStream,
out warnings);
foreach (Stream stream in m_streams)
stream.Position = 0;
private void print4()
if (m_streams == null || m_streams.Count == 0)
throw new Exception("Error: no stream to print.");
PrintDocument printDoc = new PrintDocument();
PrintDialog printDlg = new PrintDialog();
printDlg.Document = printDoc;
DialogResult dr = printDlg.ShowDialog();
if (dr == DialogResult.OK)
if (!printDoc.PrinterSettings.IsValid)
throw new Exception("Error: cannot find the default printer.");
else
printDoc.PrintPage += new PrintPageEventHandler(PrintPage);
m_currentPageIndex = 0;
printDoc.Print();
Dispose();
public void Dispose()
if (m_streams != null)
foreach (Stream stream in m_streams)
stream.Close();
m_streams = null;
private Stream CreateStream(string name, string fileNameExtension, Encoding encoding, string mimeType, bool willSeek)
Stream stream = new FileStream(name + "." + fileNameExtension,
FileMode.Create);
m_streams.Add(stream);
return stream;
private void PrintPage(object sender, PrintPageEventArgs ev)
Metafile pageImage = new
Metafile(m_streams[m_currentPageIndex]);
// Adjust rectangular area with printer margins.
Rectangle adjustedRect = new Rectangle(
ev.PageBounds.Left - (int)ev.PageSettings.HardMarginX,
ev.PageBounds.Top - (int)ev.PageSettings.HardMarginY,
ev.PageBounds.Width,
ev.PageBounds.Height);
// Draw a white background for the report
ev.Graphics.FillRectangle(Brushes.White, adjustedRect);
// Draw the report content
ev.Graphics.DrawImage(pageImage, adjustedRect);
// Prepare for the next page. Make sure we haven't hit the end.
m_currentPageIndex++;
ev.HasMorePages = (m_currentPageIndex < m_streams.Count);
Thank you very much for this wonderful tutorial. :) -
How to print new line in jsp page
hi
how to print new line in jsp page
thanks\n - new line character is in java specific not HTML
specific.Well, if the correct line separator sequence (by far not always \n) would be used, it does add a new line to the HTML output. Too bad that you don't want to see HTML but formatted text. The BR tag is a formatting element for the displayed text, not a line break in HTML. ;) -
How to print a report directly on to a printer on the client machine
Hi,
Could anyone let me know how to print a report directly on to the clients default printer in oracle forms 10g with OAS?.
Regards,
Prasad.Hello,
<p>You can use this Java Bean</p>
Francois -
How can print a report from form 6i, when I press a button?
hi Friends,
How can print a report from form 6i, when I press a button?
When i press a button from Form 6i, the report should print through printer.
I have done it by using report parameter DESTYPE Printer but problem is that when I press a button printer dialogue box appear and then I give command Print to printer, I don’t want to show Printer dialogue box.
I want when I press a button form Forms 6i , printer will print my report directly.
Please send me the solution of this problem.
Best regards,
ShahzadHi
If You are using Client server application then to passing to Add all Print Parameter in the Host Command.
Means Print command in unix to Host(lp.............) and Other Parameter to file name of the report to print.
If You not Use Client Server Application the Also Passing a Host Command in Button-Pressed Event and Run. -
How to print history report without refreshing?
Hi,
Does someone tell me how to print history report (deski, webi, and crystal) without refreshing via Java API?
I could not find in Java doc and Developer Library.
thanks,
TakHi,
It looks like that you wan to print Report's Instance and refering it as history report. If you want to print Instance of report (CR, Webi or DeskI), frist get the SI_ID, so that we can access that instance and then we have to use appropriate controller to print the report (instance)
for CR, use BOE/RAS SDK
for Webi and DeskI, use REBean SDK
Regards,
Arjun -
How to print the Terms and Condition page ine the sap-script
Hi experts,
i got the requirement that how to print the Terms and condition page in the script,i have the three pages, having the same main window, in the last of the main window(all three pages) i have called the hard coded text(i.e so10 text), but when i am displaying the output data get printed in the first page but i am getting the second page heading on the top of the terms and condiions page. In all the three pages i have the same main window, if i make change in any window i will affect all the other main windows. so please suggest me how i need to go.HOW TO GET GRID OF THE TEXT ON THE TOP OF THE SECOND PAGE OF THE TERMS AND CONDITONS.
like this i have called in the MAIN WINDOW
/E : LAST ( IN ALL THREE PAGES)
INCLUDE ZSD_INVOICE_TERMS TEXT OBJECT TEXT LANGUAGE EN.
IN THE TCODE SO10
NEW PAGE TERMS.
1) TERM MS AND CONDITONS TEXT.................................................
FIRST->NEXT, NEXT->NEXT,, TERMS--->TERMS.Hi,
1. Create a new page by Name : LAST
2. Identify the text element which will be the last element in the form in the debug mode.
Mostly Ex: SUM, TOTAL, LAST etc.,
3. the page linking should be
First --> Next
Next --> Next
4. In the Text element identified in the step 3.
Write the following code
/: NEW PAGE LAST
/: INCLUDE the standard text created for the terms and conditions in SO10
Check the syntax for the command but the logic will be the same.
It should resolve your problem. -
How to Print the Report Column headers on each page of any report
Can someone offer assistance on how I can go about achieving the ability to show and print the Report Column headers on each page of any report using the Print Attributes of APEX 3.0? These reports will be printed using Excel and Word.
I read a thread with a similar request but the answer seems vague for my level of understanding.
I am connected to a print server and using BI Publisher.
Thanks,
RicHello Ric,
>> These reports will be printed using Excel and Word.
I'm not sure I understand what you are trying to do. You are using a very powerful tool – BI Publisher – why do you need Excel or Word for printing? Is there a special need only Excel or Word can provide?
One of the major advantages of using BI Publisher is that it's taking care of all these tedious tasks like reasonable page breaking, headers and footers, and also table headers.
Regards,
Arie. -
How to print a report in landscape mode?
Hello everybody,
I have a task where in i need to print a report in LANSCAPE format.
I have tried to print the report output but i could not found an option to set LANDSCAPE mode and also how to change the font size.
Can anybody suggest me the approach?
Helpful answers will surely be rewarded.
Thanks in advance.
Sanghamitra.Hi
If you are using the command MEW-PAGE PRINT ON
then we can give this layout options
like
NEW-PAGE PRINT ON
DESTINATION <printer name>
immediately 'X'
KEEP IN SPOOL 'X'
LAYOUT 'X_65_132' (OR X_65_255)
RECEIVER SY-UNAME
NO-DISPLAY.
OTHERWISE WHEN YOU SELECT THE PRINTER
IN THE PRINTER PROPERTIES/SETTINGS BASICS-> PAPER
you will have this facility to select LANGSCAPE/PORTRAIT
use that and print
Reward points for useful Answers
Regards
Anji -
How to Print Crystal Report without any dialog message on the client side
Hi!
I've read too much questions like this, but i can't find any answer.
How can i print a report on the client side directly?
I have three buttons, "Generate Report", "Generate PDF", "Print".
I want when the "Print" button was clicked, automaticaly the report is printed using default printer, like PrintToPrinter function, but in the client side.
Thanks!If you search for previous posts about this, you will see many posts saying not possible. If this functionality was possible, you could essentially have a page that would send something to a clients printer just by visiting the page, how bad of security hole would that be?
-
How to Print a report with 50 columns. Crystal Reports
Dear Experts,
I'm Using Crystal Reports 2008. I have a requirement that 50 columns should be placed in a Single Report with single line . But Page size should be A4 ( While Printing).
With Page Size A4 I'm able to place 5 columns.
Is there any possibility to acheave this no matter if number of opages increases
I Appreciate for the help in this regard.
But I need to display all the 50 fields (columns) in a single report.
I Achieved this by changing horizontal width to 70.
I can Place all the fields in one line.
But my concern is to print this report in A4 Paper I think its horizontal width will be 11. from crystal reports itself
I don't want to use cross tabs nor even use sql expression. Its just a simple display report for all the employees.
is there any simple way out to Achieve this by paging... or any other method.
Any help regarding this issue will be appreciated.
ThanksHi:
I'm not a expert in crystal report, but I would like help you, i don't understand if must to show 50 diferrents fields in your report or same field through 50 columns ? for exemple:
first case: You ned diferents fields
F1 F2 F3 ... F50
item1 F1 Item1 F2 Item1 F3 Item F50
item2 F1 Ite21 F2 Item2 F3 Item F50
In this case you must put the 50 fields in the report, just enough small to fit page
second case: You nedd the same field in 50 columns
Colum 1 Colum2 Column 50
item 0 item 11 item 490
item 1 item 12 item 491
item 2 item 13 item492
item 10 item 20 item 500
inm this case i haven't idea how to make it (sorry)
Edited by: Wgramirez on May 29, 2010 7:01 PM -
How to create a report with different page sizes
Hi,
I would like to create a report with different page sizes, it's possible to do it with diadem?
When I change the layout parameters, changes afect to all sheets...
Is there a way to change page size individually for each sheet?
Thanks in advance.
MarcHi Marc,
You can use the DocStart and DocEnd commands along with the PicPrint command to spool multiple print commands to the same output PDF file using the direct printer approach. This should enable you to programmatically specify the page size differently for each sheet that you add to the print job.
' Print PDF Page by Page.VBS
OPTION EXPLICIT
Dim i, Path, OldPrintName
Path = AutoActPath & "2D Stacked"
Call DataDelAll
Call DataFileLoad(Path & ".TDM")
PDFFileName = Path & " Page by Page.pdf"
IF FileExist(PDFFileName) THEN Call FileDelete(PDFFileName)
OldPrintName = PrintName
PrintName = "winspool,DIAdem PDF Export,LPT1:" ' Set to PDF printer
PDFResolution = "72 DPI" ' "2400 DPI" , "default"
PDFOptimization = TRUE
PDFFontsEmbedded = FALSE
PDFJPGCompressed = "high"
PrintOrient = "landscape" ' orient paper
Call PrintMaxScale("GRAPH") ' auto-max, see alternative margin setting variables below
PrintLeftMarg = 0.181
PrintTopMarg = 0.181
PrintWidth = 10.67
'PrintHeigth = 7 (read-only)
Call WndShow("REPORT")
Call DocStart ' Begin multi-page document/print job
FOR i = 1 TO 4
Call PicLoad(Path & ".TDR")
Call GraphSheetNGet(1)
Call GraphSheetRename(GraphSheetName, "Page " & i)
Call PicUpdate
Call PicPrint("WinPrint") ' Add a page to be printed
NEXT ' i
Call DocEnd ' End multi-page document/print job
PrintName = OldPrintName
Call ExtProgram(PDFFileName)
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Maybe you are looking for
-
I get this message "the disk "ipod" is in use and could not be ejected. Try quiting applications..." I will get this even with everything closed. Any ideas?
-
Hi, I have a situation where I have to deploy 1600 APs to a remote controller due to them not being supported by the 2100 series controllers at our local site. There are 1142s connected to the local controllers. I have the 1600s configured and they r
-
Adding window AD group in to CMC
Hi All, I added MAPPED AD GROUP in to CMC in the authentication. Can any1 say once I add the group will all the user appear by default in cmc in to the group if its been added in the ACTIVE DIRECTORY. Thanks, Pavana
-
Dear Experts, I have maintain price list in price list master, where i define my product price. & l same price list i assign in my customer. & For some of my customer i have define special prices but my base price list is Same. When i go for Sales
-
Hello! Got a small question. I currently have a premium account and I want to make calls to Japan. In the prices section for premium, I see it has unlimited calls to landlines for Japan. I'm just wondering, will I still need to buy the Unlimited Japa