How to print new main report page based on number of records in subreport?

Hi,
I've a main report which prints on a pre-printed stationary with 2 subreports in the detail section. The subreport prints multiple records. If there are more than 6 records in the subreports, a new page should be printed with all the contents of the main report and the subreports should continue with the remaining records. How can I do this? I've tried incrementing a shared variable counter in the subreport and accessed that variable in the detail section of the main report to check the counter and reset the counter to 0 if it exceeds 6. But this does not work. All the lines till it can hit page footer are printing on first page and the second page prints only the remaining subreport lines without the other details of the main report page.
The main report page uses a view which returns only 1 record. The subreport returns multiple records.
I would certainly appreciate if any one can provide a solution for this problem.
Thanks,
Ram

hi Ram,
sorry, i misunderstood exactly what you wanted.
let me get this straight...
1) if there's more than 6 records in the subreport then show only the first 6 records
2) then (if there's more than 6 records) do a new page after the subreport
3) then (if there's more than 6 records) show the subreport's remaining records and the rest of the report
let know if i've got it straight.
if that is correct, you will have received another sample report that does this. in total 3 subreports are used...one is a dummy report that adds up the number of records which is used later. there's more info on the report's design mode.
cheers,
jamie

Similar Messages

How to stop to display the main report page header in the subreport!

Hello all,
I have an existed report that display the CR page header on every page of the report. Now I added another subreport into report footer without using link. How do I stop to display the main report page header and display the subreport in the new page with subreport header only? I really appreciate your time to help me out on this issue. Thanks.

Hi,
I tried to supress the page header with (onlastrecord and TotalpageCount > 1) condition, but the last page of main report without page header. I still like the page header display on last record, but not on the subreport only. How do I get it? Thanks in advance.

How to print new line in jsp page

hi
how to print new line in jsp page
thanks

\n - new line character is in java specific not HTML
specific.Well, if the correct line separator sequence (by far not always \n) would be used, it does add a new line to the HTML output. Too bad that you don't want to see HTML but formatted text. The BR tag is a formatting element for the displayed text, not a line break in HTML. ;)

How to print out multilingual reports from the main report using Xliff temp

Hi all,
How to print out multilingual reports from the main report using Xliff temp?
When I want main report call subtemplate and finish xliff tranlation
<?for-each@section:INVOICE?><?end for-each?>
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
<?start:body?><?call:Header?><?call:Line?><?call:Weights?><?call:Banks?><?end body?><?call:Footer?>
Prints out fine with Finnish translation
But if I want in main program to check what language is used e.g.
if trx_number = 142 call Finnish translation and if trx_number =144,
call English translation.
<?for-each@section:INVOICE?><?end for-each?>
<?if:TRX_NUMBER=’142’?>
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
<?start:body?><?call:Header?><?call:Line?><?call:Weights?><?call:Banks?><?end body?><?call:Footer?>
<?end if?>
<?if: TRX_NUMBER=’144’?>
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.US/?>
<?start:body?><?call:Header?><?call:Line?><?call:Weights?><?call:Banks?><?end body?><?call:Footer?>
<?end if?>
Prints out always in English and never the Finnish translation.
Program goes fine to if branch but does not print out Finnish
Does anybody know what could be wrong?
BR
Kari

Thanks Amit,
I have two layout, main-layout and sub-layout
Main layout call subtemplate
I have registered layout and xliff-file
Main template
Localized Templates
File Name           Language Territory
XXNS_INVOICE_MAIN.rtf      English
SUB template
Localized Templates
File Name           Language Territory
XXNS_INVOICE_SUB.rtf      English
Translatable Template
File Name           Language      Territory
XXNS_INVOICE_SUB.rtf      English      United States
Available Translations
Language Territory Progress
English Finland Complete
If main report call subtemplate and finish xliff tranlation
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
Prints out fine with Finnish translation
But if I want in main program to check what language is used e.g.
if....
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.FI/?>
.....end if;
if....
<?import:xdo://XXIH.XXNR_XXINVPRINT_SUB.en.US/?>
.....end if;
Prints out always in English and never the Finnish translation.
Program goes fine to if branch but does not print out Finnish
Do you it's set up problem or program problem
BR
Kari

How to print Group Header on page break in a subreport - CR XI

Post Author: rickcf
CA Forum: General
I have a subreport that has 3 groups with only one group that has a heading. When the report prints and a subreport group is split between two pages (on a page break) I would like the group heading to also print again at the top of the page- even with the word "continued..." also. Right now only the main report page header prints. How can I do this since there is no page header in a subreport?
Thanks
Rick

Post Author: rickcf
CA Forum: General
Is there any way to test during detail processing time to see if a page break is occuring? If so I could print out a fake header on the detail line, suppressing it only if the page breaks. That is the only thing I can come up with to solve the issue.
I am surprised the is not an option to reprint the group header on a page break. That seems like a needed option and that is the standard in Foxpro reporting - there is a checkbox option to cover this scenario.
A coworker did find a workaround to add a psudo page header to a subreport so if I can add that and put my group info in there it will also work. I have not looked at the code yet though.
I have another issue I am working on so this one might take a while to get back to.
Rick

How to print an envelope in pages 5.0

How to print an envelope in pages 5.0

I'm away from my computer right now but I believe there is a template for that.
Click New, select new from template, it should be there...
Alexis

Print New invoices Report

Can some give me the complete documentation related to this 'Print New Invoices' report.
Also, is this report supposed to display all the installments spanning various months in the output or is it supposed to show only the installment for the current month for which the report is run.
Thanks in advance,
Pradeep

Welcome to the forums !
I believe your questions are answered in the documentation. Pl see Chapter 10 of the Receivables User Guide at http://download.oracle.com/docs/cd/B40089_10/current/acrobat/120arug.zip
HTH
Srini

How to view an asset report by origianl asset number

Hi,
how to view an asset report by origianl asset number(Legacy number)
Thanks
Supriya

hi,
goto the following path
sap menu. => accounting => financial accounting=> fixed assets=> information system=> reporting on asset accounting=> asset balances=> balances lists=>asset balances
hope you can find something here
regrds
sayeed

How to activate a different sub-report for each row in the data set as main report page breaks on each row of data in the main dataset

I am going to try asking this same question a different way as I have yet to find a working solution to my problem. I have a main report and then 8 sub reports. My main report has one data set and returns one row of data per account number. One
of the fields in the main data set is called AccountProf. My main report displays one page per Account number and then calls a different sub report based on that account's AccountProf value. The sub reports take in the account number as a parameter
and get multiple rows of data to display that accounts usage formatted differntly for each AccountProf (hence the 8 different sub report.
So far I can figure out how to do everything but setting the visibility property of each sub-reports when I have multiple accounts. If I use the following expression for the visibility property on each sub report, it makes all the applicable sub report
for all the accounts requested visible at once:
=IIF(Fields!AccountProf.Value= "USE_PLUS_DMD",False,True)
*The value in bold USE_PLUS_DMD is different for each sub report.
Here is a look at what the main report look like:
Here is the main reports data set:

Hi JasonDWilson77,
According to your description, there is a main report and 8 sub reports in the report, you want to set visibility of sub reports, if no value is passed to the parameter of sub report, the sub report will not be displayed. If that is the case, please refer
to the following steps:
1. Create a new parameter named NewAccountNumber, set its data type the same as @AccountNumber, select Allow multiple values, set Visibility to be hidden, then set all available values to default values.
2. Right-click the first sub report and open Subreport Properties dialog box, click Parameters in left pane, set name to AccountNumber, then click (fx) button, type the expression like below:
=Parameters! NewAccountNumber(0)
3. Click Visibility in left pane, select Show or hide based on an expression, then click (fx) button and type the expression like below:
=IIF(InStr(Join(Parameters! AccountNumber.Value), Parameters!NewAccountNumber.Value(0))>0 , false,true)
4. Modify parameter of other sub reports like step2.
5. Set visibility of other sub reports like step3.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

How to print one (or more) page only from multipages report?

Citations from Report Builder Help:
To print a report from the Runtime Previewer:
1. In the Runtime Previewer, click <Page Setup> in the toolbar to verify your printer setup.
2. Click <Print> in the toolbar.
3. In the dialog box, type the number of pages and copies you want to print.
If you ran the report with a DESTYPE of Screen, a warning appears that you should run the report with a DESTYPE of Preview before printing. Preview creates PostScript output, which is typically more desirable for printing bit-mapped reports.
4. Click OK.
When I click <Print>, the dialog box is not dispaying and all report pages are sending to printer.

Hi Al,
Check out this thread: Sort within Break? I was looking to preserve a basic sort for break purposes, but the same solution should work for keeping one row at the bottom.
Let me know if you'd like more details.
--Jennifer

How to print an html report?

In a Test UUT's execution, the process model generates and saves a html report. How can add steps to the process model to print the report each time? I'm thinking maybe somehow using an ActiveX call to open IE and then print (1 step or 2?), but I'm a newbie to ActiveX and don't know what server/class/method to use.
==============================================
David Kaufman
LabVIEW Certified Developer
==============================================

Using Microsoft Word could be a good solution if you actually have it installed in the computer. In some cases, you may not want to have that application installed in the production floor for any reason (licenses, memory space...).
I am attaching an example that shows how to print the report automatically after testing a UUT using ActiveX to communicate with Internet Explorer. It is more likely that any machine would have this application installed since it occupies a lot less memory space and it ships with any Windows OS. Furthermore, there are just 3 steps that do the trick!
The attached zip file contains a modified sequential model. The entry points ("Single Step" and “Test UUTs”) have one new step that calls the "Print Report" sequence (also added to the sequential model). This new sequence has ActiveX steps that call two methods of the “Internet Explorer (IwebBrowser2)”object class exported by the “Microsoft Internet Controls” automation server. These two methods are:
1) Navigate. Allows you to select the html file to load.
2) ExecWB with the first parameter (cmdid) set to "OLECMDID_PRINT" (prints the loaded file) and the second parameter (cmdexecopt) set to OLECMDEXECOPT_DONTPROMPTUSER" (don’t show the print dialog).
(For more information about these methods, please refer to the MSDN Library)
The example will print the report after each UUT is tested. The "Print Report" step is set to run just if the Report Generation is not disabled (see its preconditions).
This is what you need to do to run the example:
1) Copy the contents of the zip file to: \Components\User\Models\TestStandModels
2) Make sure that the “User Components Directoty” is checked in the Search Directories.
3) Run any sequence using Single Pass or Test UUTs.
WARNING: There is a known issue when using the printing capabilities of the Internet Explorer. This is what is explained in the MSDN library:
"... Internet Explorer prints in the background. This means that the print processing is actually completed asynchronously in a separate thread.Upon return from ExecWB, the print processing may continue for several seconds or even up to a minute or two based on various factors such as the size of the content and how busy your system is currently. The problem is that if you start a print job and then destroy the WebBrowser or close your application before the background thread finishes processing, the thread will abandon its work and the page may not be completely printed..."
There are 2 approaches to work around this problem:
1) Use a delay before destroying the WebBrowser reference (which is done in the cleanup step group of the "Print Report" sequence in the example). This is the approached used in the example. The third step in the “Print Report” sequence is a Wait step. The step is currently set to wait for 3 seconds which has worked for me for almost any report sizes.
2)In Internet Explorer 5 you can work around this problem by sinking the OnAfterPrint event. If you have started a print job, then you should wait to release the WebBrowser until after this event has been received. If you choose this approach you could use the ActiveX events capabilities of Labview or Visual Basic to create a small program detecting this event. There's a simple sample code provided in the MSDN library for VB.
Enjoy!
Attachments:
SequentialModel.seq ‏169 KB

How to print formated data/report on client's printer (Web Application)

Hi All
I want to print some formatted data/report ( it might be 1000 pages) on user's printer.
Application is web based
Technology used are Java - jsp - servlets
i want functionality like...
when user click on print button/link, data is fetched from server and all pages (it is formated data so i want alignment on page while printing) should be printed one after another.
Also printer selection dialog should displayed one time when user click on print button/link.
Questions:
1. How i will transfer all data to client (web browser) from the server ??
2. And how i can print that data on user's printer ??
There is requirement (or limitation) that I can not use applet for this purpose.
And also it is not fix that we must use java tech., we can use any othere tech. but condition is that it must support multiple platform (in short platform indipendant)
There is solution like ...
I can use window.print() function of DOM/JavaScript,
but it prints only one page which is displayed on browser.
I don't want to display any page. and want to print all pages.
if any one done or have idea then let me know.
Thanks in Adv.
Shailesh Koradiya

thanks linxpda for reply,
we can use ActiveX component for windows platform for printing purpose, same way we can use platform specific component for printing... (for linux, unix, sun solaris etc...)
if it is possible then let me inform.
Thanks,
Shailesh Koradiya

Populate report page based on results from stored procedure

Is it possible to populate a report page in APEX based on the results from a stored procedure? If so, how do I do it? Do I write a stored procedure with a ref cursor as out parameter?

I would use a stored procedure to return the values for a form but not for a report. For a
report, I would use a pipelined function. See an example here:
http://htmldb.oracle.com/pls/otn/f?p=31517:146
Denes Kubicek
http://deneskubicek.blogspot.com/
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

How can I have Main report with a sub-report with in a sub-report??

I have a main report that has about 5 subreports, almost like a dashboard. I need to make one of those subreports contain another subreport.
I don't have the option to add a sub-report with in my sub-report, so what I thought would work is remove my sub-report from my main report, then add my new sub-report, then add that report back to my main report.
Everytime I add the sub-report that has a sub-report to my main report I lose the second sub.
From what I've read on the internet is you can't have a sub-report contain another sub-report. What some say is you can hyperlink that second sub report.
When I setup my hyper link to open the second sub-report I'm prompted to re-enter my report parameters.
Can some help me link a sub-report to a sub-report or show me how to pass a date range parameter in my hyper link so the reports just opens up?
I'm using CR IX R2
Thanks

Nate,
You are dealing with a product limitation. Crystal cannot have nested subreports within a sub report.
You can generally use shared variables between sub reports to achieve your desired result

How to print a document in Pages

just got iMac computer and downloaded Pages. Can not work out how to print a document I just created

Hi LL,
There's a great piece of free documentation for Pages called the Pages User Guide. It can be downloaded from the Help menu. I suggest that you read the well-written guide some quiet evening. It will get you off and running with your new computer and Pages.
Printing documents on a Mac is the same as on a Windows system: File > Print.
Jerry

How to print new main report page based on number of records in subreport?

Similar Messages

Maybe you are looking for