How to print the report file name and path and the last mod date

Good morning,
I am trying to print on the footer of the report the report file name and path as well as the report last modification date.
Anyone would know how I can do that? I have checked the doc but found nothing.
Thks. Philippe.

Did you ever determine how to print report name and report last mod date?
Thanks

Similar Messages

How to print a pdf file of compounds A3 and A4 with adobe mac

how to print a pdf file of compounds A3 and A4 with adobe mac, windows with the option I choose paper source by PDF page size mac but I can not find it. how to get it thank you

I think if you use the start-command, the execution is asynchronously and you won't get the correct process-id. Try to execute Acorbat directly without the cmd /c start in front of it.

How to get the Output File Name as One of the Field Value From Payload

Hi All,
I want to get the Output file name as one of the Field value from payload.
Example:
Source XML
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_TEST xmlns:ns0="http://sample.com">
- <Header>
<NAME>Bopanna</NAME>
</Header>
</ns0:MT_TEST>
I want to get the Output file name as " Bopanna.xml"
Please suggest me on this.
Regards
Bopanna

Hi,
There are couple of links already available for this. Just for info see the below details,
The Output file name could be used from the field value of payload. For this you need to use the UDF DynamicFile name with below code,
// Description: Function to create dynamic Filename
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File" , "FileName");
conf.put(key,a);
return "";
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File" , "FileName");
conf.put(key,a);
return "";
With this udf map it with the MessageType as
(File Name field from Payload) > DynamicFileConfiguration>MTReceiver
Thanks
Swarup

How can I change the report file name depending on which seq file is run in the main seq?

I'm using TestStand 3.0.
I have a main sequence file with a menu option to select one of several sequence files to run.
How can I get TestStand to change report file name to the selected sequence file rather than the main sequence file name?
Thanks
Harminder

Hi Harminder
Try RunState.Root.Locals.ReportFilePath = "PathToMyFile.xxx"
regards
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

When someone other than myself downloads an image from my web album, a dynamically generated file name replaces the original file name. How I can prevent the original file name being replaced during the downloading process?

When someone other than myself downloads an image from my web album, a dynamically generated file name replaces the original file name. How I can prevent the file name being changed during this downloading process?

Hi Glenyse,
Here are my steps.
1. I upload multiple image (jpg) files onto my photo album.
2. I select the "sharing" by email option for this album.
3. I enter the recipient's email address.
4. The recipient receives my message and clicks on the link.
5. The recipient accesses my photo album and clicks on one of the images.
6. The image opens up to its own screen.
7. The recipient selects the "download" and then save file option.
Here is the part I do not understand. For some reason, during this "download" process, the original name which I have given to the file is replaced by different name. So I was hoping that someone knows how to prevent the file name from being changed during the "download and save" process.
Much appreciated if you can help me find a solution to this problem.
Mary

Add serial number in the report file name when using batch process model

I would like to append a string containing the current UUT serial number to the base name of the report file. For example, uut_report.html becomes uut_report[SN000001].html. This setting is not available if I use NI BatchModel.seq as my process model.
Thanks!
Jacky

duplicate post
Ask your question only once.

How do I put a file in my path and chmod it +x?

I want to transfer karaoke files from my mac to my iphone (to use with karaoke anywhere). On a different message board someone explained how to do it, but I have no idea how to put a file in my path and chmod it +x; I know very little about computers.
If it helps, the explanation that I don't understand is in post 6 of the following thread: http://forum.joltsoft.net/topic/32/bulk-transfer/

Create a subdirectory call bin
mkdir $HOME/bin
Put the qsend php script in the bin directory. Make the qsend php script executable
chmod +x $HOME/bin/qsend
Add the following to your shell initialization file (more on the name in a moment). You can use an editor such as nano from the Terminal, or Fraise (free download), or TextWrangler (free download)
export PATH="$HOME/bin:$PATH"
About the initialization file. It will be either .bash_profile or .profile (NOTE: by default neither file will exist on your system, unless you created one in the past).
Because these names start with a dot, they are hidden from the Finder, so you will need to use the Terminal and the "ls -a" command
ls -a $HOME/.bash_profile $HOME/.profile
If you already have a .bash_profile, add the export PATH="..." to .bash_profile
If you do not have .bash_profile, but you do have a .profile, then add the export to .profile
If you do not have either of those files, then create .bash_profile using nano, Fraise, or TextWrangler.
You can find out more information about bash shell initialization files using the command "man bash".
Once you have added your export PATH="..." command, quit the Terminal, and restart a new session, which will cause your bash shell to read the initialization file you just modified.
You should now be able to use your qsend script.
Message was edited by: BobHarris

How do I call image file names from MySQL & display the image?

Hello everyone,
I have image file names (not the full URL) stored in a MySQL database. The MySQL database is part of MAMP 1.7 and I am using Dreamweaver CS3 on a Mac Book Pro.
I would like to create a catalog page using thumbnails, and PayPal buttons displayed within a table, in rows. With the image centered and the PayPal button directly underneath the image.
How do I use PHP to call the thumbnail images as an image not the file name, to be displayed in the table?
Thanks in advance.

slam38 wrote:
How do I use PHP to call the thumbnail images as an image not the file name, to be displayed in the table?
Open the Insert Image dialog box in the normal way, and navigate to the folder that contains the images. Then copy to your clipboard the value in the URL field, and click the Data Sources button. The following screenshot was taken in the Windows version, but the only difference is that Data Sources is a radio button at the top of the dialog box in Windows. It's a button at the bottom in the Mac:
After selecting Data Sources, select the image field from the approriate recordset. Then put your cursor in the URL field and paste in the path that you copied to your clipboard earlier.

How to Print Crystal Report without any dialog message on the client side

Hi!
I've read too much questions like this, but i can't find any answer.
How can i print a report on the client side directly?
I have three buttons, "Generate Report", "Generate PDF", "Print".
I want when the "Print" button was clicked, automaticaly the report is printed using default printer, like PrintToPrinter function, but in the client side.
Thanks!

If you search for previous posts about this, you will see many posts saying not possible. If this functionality was possible, you could essentially have a page that would send something to a clients printer just by visiting the page, how bad of security hole would that be?

How can I store a form name with path and then call form from a table

Is it possible that any form that I built I store that form in some table in DB and then call that form from table, if yes, then how can i get this functionality. I am not very experience in form and do not know if it can be done because i think if it is possible then this can be a good security for application and easy to handle as well.
Thanks in advance
Maz

If you have a Forms block based on this table:
declare
module varchar2(100);
begin
module := :block.column;
call_form ( module ) ;
end;If you don't have any blok based on that table
declare
module varchar2(100);
begin
select module_name
into module
from ...
where ...
call_form ( module ) ;
end;Francois

Report file name as parameter

There's probably a simple answer to this but I can't figure it out...
I have made a jsp-page to view my report using CR4E's Create Viewer JSP wizard. Instead of hard-coded report file name, I'm taking the name from URL parameter like this
myviewer.jsp?report=myreport.rpt
The report shows fine until I click any of the controls (next page, print, export, etc.) in HTML-viewer. This seems to run some javascript code that calls the myviewer.jsp again, but loses all URL parameters! How can I preserve those parameters?

Page navigation with the viewer works by post-back to the page where you've defined the viewer - the viewer interprets the postback GET parameters for the action required.
This means that the ReportSource must be available for every postback - usually, it's stored in HTTP Session.
Check out the following sample codes:
http://support.businessobjects.com/communityCS/FilesAndUpdates/crxi_r2_jrc_web_samples.zip.asp
Sincerely,
Ted Ueda

Adding batch serial number to report file name in sequential model

Hi,
I'm using a Sequential model in TS 4.0 and have learned how to add the UUT serial number to the report file name. But I would like to add the batch serial number instead. Is this possible? Any modifications to the ReportOptions callback seem to only modify the temp report name.
Thanks!
Chris

Hi Chris,
While Paul's suggestion may be useful in this case, if you would like the flexibility of customizing your Report File Pathnames further, you may want to consider upgrading to TestStand 4.2.
In TestStand 4.2 we introduced predefined macros and the ability to use custom expressions to specify the Report File Pathname. For example, the <Batch> macro will add the Batch Serial Number to the Report File Pathname as you specify it.
Please see the Using Expressions to Customize Report File Paths section of the TestStand 4.2 Reference Manual for more information on these new reporting features and how one might use them. For a specific explanation of the different macros and what they might be used for, please see the Specifying Report File Paths by Expression section of the TestStand 4.2 Online Help.
Manooch H.
National Instruments

Retrieve Current Report File Name

i am using Forms and Reports 6i.
in Forms, i am using the following statement to get the current form name -
GET_FORM_PROPERTY (:system.current_form, FILE_NAME)
i didn't find a similar statement in report to get the report file name,
plz help...

Hello,
You will have more chance to get an answer by sending this question in the Reports forum.
Francois

Report file name error with Chinese Date format

Hello,
I am seeing an error at
step Write UUT report in the standard model files. This step is
calling the API method save on the object Runstate.Report.
The issue occurs on computers using chinese localization with the date in the report file name.
Is this a known issue? Is there a way to modify the filename before calling the above method to eliminate the problem?
Solved!
Go to Solution.

An Error Message is attached.
WE have seen this on both Vista and XP. We are using TestStand version 4.1.1. I am not sure about the localization, but I have seen this on computers from Taiwan, Korea and Japan.
If I put a breakpoint in the Model file at the Write UUT Report Step, you can see Chinese Characters in the time portion of the file name.
If you change the report name to not include the time and date, the error does not occur.
We have seen this with ASCII and xml. With XML, the error also occurs at the step "Add Root Tags to XML Report"
Attachments:
FileNameError.JPG ‏134 KB

Modify UUT report file name

Hello,
I use TesStand 3.1 in Batchmode with 4 Testsockets and generate a XML Testreport for every UUT with the serial number in the file name.
I leave the "Enter UUT Serial Number" dialog boxes at the begin empty.
After that i read out the Serial Number of my UUTs at the runtime via CAN and use the "PostUUT-Callback" to modify the "Parameters.UUT.SerialNumber".
Because of that the UUT Serial Number appears in the Report Header.
But the report filename is always "Report[NO_UUT_SERIAL_NUM0][date][time].xml".
Is it possible to modify the "UUT Serial Number" in the Report File Name, too?
Thanx for your answers!
Greetz ALIEN

We modify the report name to include error count, Model, build, etc. but it requires that the Report be complete at that point (file no longer locked by TestStand).
In order to do this, you'll need to create a Sequence (with no Process Model) to call the test sequence using Subsequence call with the "Run Sequence in a New Execution" selected in the "Specify Module", Multithreading selection ring.
There may be other ways to do what you're attempting, but this gives you freedom to rename the file.
Mike

How to print the report file name and path and the last mod date

Similar Messages

Maybe you are looking for