How to print Warranty (Duration) on Delivery Note using PLD

Hi,
How can I print Warranty (No. of Months) on Delivery Note using PLD. Warranty is already defined in a service template which is assigned to Item Master record.
when i try to print "duration" from OCTT is shows all the duration values set in all service templates with the combination of all the items in the delivery note. Please help me. I am working on SAP B1 2007 A PL47.

Hi
Its Very Easy just Follow the Steps:
Create One DB field in Repetative area0 - Table -octt(contract Temp) Column- Duration(Duration of Coverage)
Check the Item code Field or Item description field for EX( F_123), then in Duration DB field - Go to Properties -Field in that - General - Lint to - connect the  ( F_123), code Field or Item description field for EX( F_123),
So it will show automatically Duration of the Item which was connected in master data.
It works perfectly in 2007B PL 10.
If issue Resolved pls close the thread
Giri

Similar Messages

  • How to from more than one delivery note - conversion into one invoice

    Dear Experts,
    How to from more than one delivery note - conversion into one invoice?
    Thanks and best regards,
    Wilson Hong

    Dear Wilson Hong,
    Single invoice for multiple deliveries will takes place based on these criterion
    1.If you want single billing document for multiple deliveries these data should be same in all order for all items.
    -> Payer
    -> Inco term
    -> Payment term
    -> Actual GI Date from Delivery
    -> Shipping Condition
    -> Account Assignment Group
    -> Exchange rate (in case of export sale order)
    -> Foreign trade data.
    2.In addition to this you need to maintain proper copy control settings between delivery and invoice.
    Go to VTFL transaction input your delivery type and invoice type then go in to the item level settings here you find field Data VBRK/VBRP maintain this field with routine 3-Single invoice.
    If the above data and settings are exists you can do single invoice for multiple deliveries.
    I hope this will help you,
    Regards,
    Murali.

  • How to Print the Account Balance in Outgoing Payment PLD

    Hello Experts
    How to Print the Account Balance in Outgoing Payment PLD
    Dixit Patel

    Hi,
    you can use udf in the outgoing payment to record  the vendor's account balance and then using the query FMS ;
    select balance from ocrd where cardcode = $[$4.0.0]
    Assign the query in the UDF so that each time after entering the vendor code, the balance appears.
    After add the payment, the balance is recorded.
    In PLD, you can create the UDF field to make the balance appears in the outgoing report.
    Rgds,
    JimM

  • How do I get rid of the Not Using SoftArtisan File UP notice that is slowing down my uploads to class where I teach?

    How do I get rid of the Not Using SoftArtisan File UP notice that is slowing down my uploads to class where I teach? A notice now appears every time I upload an image to class as an attachment that says, Not Using SoftArtisan File UP, and this appears to be slowing down my uploads tremendously. I want to get rid of this. I never used it before and don't need it and don't want it. I just want the uploads to work like they did before this idiotic notice started slowing things down.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • How we can display two list if not using blocked alv ,not scr painter

    how we can display two list if not using blocked alv ,not scr painter

    1. Once the cell number/service on the 3GS is transfered to the 5, the 3S will become basically an iPod touch until a new sim is in place, correct? We can still use wi-fi and the apps on the phone, and still be able to sync to iTunes, correct? iOS has been upgraded to 6.
    1a. With a new Sim, any issue with losing any data/apps on the phone? I dont' think so.
    1. Yes. without a sim it has no service, but all other features should be useable normally.
    1.a Nope, Data and Apps are independent of the Sim.
    2. Once the 5 is activated on the new carrier, how do I share the apps within iTunes? Is it as easy as using iCloud (which we haven't "activated" yet) and/or plugging both phones into iTunes and transferring between devices (authorizing both)? Photos? There are photos on the 3S that we will need on the 5.
    2. As long as both Phones use the same Apple ID, the applications can be synced to each through iTunes. Also any downloads on one phone should appear in the other. Again as long as both phones are using the same Apple ID.
    3. Reverse order for new apps purchased (understand that not all the iphone 5 apps will work on the 3GS)?
    3. If they can be run on the iPhone3GS they should be synced automatically.
    4. My husband also has a new iPad, any complications there with three devices? To date, he has not "shared" apps between his 3S and the iPad. He does not have iCloud set up, but plugs into his computer to backup and transfer photos. 
    4. If all 3 Devices share the same Apple ID all should be synced. 
    As a word of warning, if all 3 devices use the same Apple ID, messages recieved using iMessage will appear on all 3 devices.
    And Conctacts may get overwritten if synced to iCloud (thogh you say he doesn't have one), or merged together.

  • SD delivery notes using adobe forms

    Dear Gurus,
    I need to pring SD delivery notes using adobe forms
    I tried to assign:
    Program: RVADDN01                               
    Routine: ENTRY
    Form: RVDELNOTE
    But it is not working....Do you have any idea?
    Regards,
    MaX

    Solved...use ENTRY_PDF

  • How to put footer in the Delivery note  sap script form.

    Hi All,
      i am new to SAP SCRIPT , can any one guide us how to Create a footer in the Delivery note sap  script.
      I need to put  some message if the stock of the material is "0"(zero).
           can anyone  tell me the process to do this.
    Thanks
    Channappa Sajjanar

    Hi,
    U create a window in script (Footer), and in the Driver program call this window at last..
    eg:
    create a window in script and call it at the end in the layout..
    /E FOOTER
    P1 'Write Required text what u want to display;.
    now in print program, after printing all the line items in ur internal table call the FM write_form to print the footer...
    LOOP AT itab.
      call function 'WRITE_FORM'
        exporting
         window = 'MAIN'
        exceptions
          others = 1.
    endloop.
    now call, FM write_form to print the footer
    IF stock EQ 0.
    call function 'WRITE_FORM'
        exporting
         window = 'FOOTER'
          element = 'FOOTER'
        exceptions
           others = 1.
    endif.
    Hope it helps!!
    Rgds,
    Pavan

  • How can I print an 8x10 picture and not use the print tray

    I want to load photo paper into the regular paper tray and print but the system only prionts images onto the 4x6 paper. I've only had the printer one day and already I find it confusing, If I cannot print like I was able to using my old Epson printer, I think this ius the wrong hardware for me

    How can I print photo's larger than 4x6. The paper tray will not take a larger size photo pPer

  • How to reverse goods issue for delivery note by using IDoc

    Hi all,
    I would like to reverse goods issue and picking request for delivery note by using inbound IDoc.
    I used message type SHPCON and IDoc type DEVLRY03 for posting goods issue in inbound processing and it's work but I couldn't find solution for posting reverse goods issue.
    Pls let me know which IDoc type or any ways for posting goods issue reversal and cancelling picking request.
    Thanks for your time.
    Su R.

    Hello,
              For this requirements we can actually follow two Approaches that I can think of. Here they are.
    Approach 1
             Little Complex Approach. What we can do is to make use of the Same Function Module (Posting Program) IDOC_INPUT_DELVRY to do the Delivery Updates (Except reversing the Goods Issue). During this,  we can make use of one of the Customer Functions available in the Enhancement V55K0001 and satisfy our Requirement.
    Approach 2
            We can actually code a Custom Posting Program (Function Module) in which the first part will take care of updating the Delivery & if the PGI is done, then we can make use of the Function Module BAPI_GOODSMVT_CANCEL to reverse the PGI.
            I think the later Approach is much easier rather than going for the Standard Function Module (Posting Program), Exits and find a place where we have to find another Enhancement Spot / Enhancement where we can call the above FM to Cancel the Goods Movement.
    Hope these inputs were helpful.
    Thanks and Regards,
    Venkat Phani Prasad Konduri

  • How to print a 4.25x5.5 Booklet using 8.5X11 paper

    I would like to be able to print a booklet, each page size 4.25x5.5 (of a quarter of a 8.5x11 sheet of paper).  There should be 8 pages per page (i.e double sided printing) and the pages should be organized so that the sheets can be folded resulting in a booklet that can be stapled in the middle, on the seam.  I could not get ID to do this; the closest I got was 4 pages per sheets meaning half of the sheet was blank.  Any suggestions.

    How were you setting up the print? I would think that Using Print Booklet and setting it to 4-up perfect bound would do what you want, but you would need to set the signature size to the number of pages in the booklet.
    You can also create a new file 4.25 x 11 or 5.5 x 8.5 depending on the orientation, then use Scott Zanelli's script (InDesignSecrets » Blog Archive » Zanelli Releases MultiPageImporter for Importing both PDF and INDD Files) to place the pages from the original file twice so you have two copies of the booklet stacked together. Then run Print Booklet with 2-up Saddle Stitch and cut them apart.

  • Problem in Creating Delivery Note using DI API

    i am using DI Api with Delphi Language to Create a Sales Delivery Note based on the sales Order.
    But Each time when i add, a new Record gets Created rather than the new Line.
          Document:= IDocuments(FCompany.GetBusinessObject(oDeliveryNotes));
          Document.CardCode         := 'A001'
          Document.Lines.BaseType   := 17;
          Document.Lines.BaseEntry  := 84;
          Document.Lines.BaseLine   := 4;
          Document.Lines.ItemCode := '001A';
          Document.Lines.Quantity := 10;
          Result := FODLN.Add;
    In this case,new rows are added each time in the tables ODLN and RDR1.
    How to avoid this.As this creates a individual Delivery Note for each time i add than to the Order Number.

    HI,
    The problem : Do not specify ItemCode if you specify Base document.
    So
    1st case
    Document:= IDocuments(FCompany.GetBusinessObject(oDeliveryNotes));
    Document.CardCode := 'A001'
    Document.Lines.BaseType := 17;
    Document.Lines.BaseEntry := 84;
    Document.Lines.BaseLine := 4;
    Document.Lines.Quantity := 10;
    Result := FODLN.Add;
    or
    2nd case
    Document:= IDocuments(FCompany.GetBusinessObject(oDeliveryNotes));
    Document.CardCode := 'A001'
    Document.Lines.ItemCode := '001A';
    Document.Lines.Quantity := 10;
    Result := FODLN.Add;
    1st case creates delivery note with only one row with reference to Sales Order
    Take care: BaseLine comes from 0
    2dn case creates delivery note with only one row WITHOUT reference.
    if you have more than one rows, use the
    Document.Lines.Add to enter another row
    Regards,
    J.

  • Subcontract PO error VU013 when creating delivery note using ME2o

    FYI to the forum, I had a user getting error VU 013 "Document is incomplete: You cannot save the delivery" when attempting to create a delivery note to send components to a subcontract vendor using ME2o.
    I spent quite a bit of time researching this on this site and did not find a solution to my problem. As it turns out, the issue was that this part had a serialization profile which required serial numbers to be assigned in the delivery note. Our workaround solution was to change the serialization profile to one which did not make it obligatory on the DN. We then issued the DN and manually assigned the serial number to it, then finally changed the material master back to the obligatory profile.
    Ideally, we would have liked the error message to indicate exactly what made the document incomplete (i.e. missing serial number in this case). I am not sure how to do that. Also, I found information regarding activating enhancement for serial numbers in purchasing (in EhP4). Presumably, this would allow me to specify the serial number(s) of the components to be issued to the vendor in the purchase order, and therefore automatically copy this into the subsequent DN. I activated this functionality, but did not get it to work. (Serial number maintenance was not visible in my PO.)
    If anyone has successfully dealt with either of these things (changing the error message, or activating the functionality) let me know. Otherwise, I will close the thread, as I just wanted to notify people of my findings regarding reasons for the error, and my workaround.

    I think the solution from OSS note will help to know the exact reason of the VU013 error:
    335504 - Not possible to save delivery because of VU013
    and OSS note
    1029482 - ME2O: ME 346, although serial number usage optional
    gives more insight and suppress the error message

  • How can I cut iCloud off and not use it anymore?

    I want to completely cut iCloud off. How can I do this. I only use the iPhone now and it gets me confused for iTunes. I want to go back to iTunes as it used to be and not in some clould.

    Then you can't remove it, but you can stop using it. Sign out (in System Preferences>iCloud) but before you do make a backup of your contacts and calendars .......
    I am serious about the backup, ignore at your own risk.

  • Creating Invoice from a Delivery Note using SDK

    Hi,
    I am working on SAP 2005 A Patch 4 with SQL 2000 SP 4. I am using VB.NET (VS2005). I am trying to create a Invoice from a Delivery note which is created based on a Sales order.
    I am getting the following error
    Error occured while saving Invoice: 0 - '15' is not a valid value for field 'BaseType'. The valid values are: '-1' - '',  '0' - '',  '23' - 'Sales Quotation',  '17' - 'Sales Order',  '16' - 'A/R Returns'
    The Code that i used to create the invoice is as follows
    Dim oInvoice As SAPbobsCOM.Documents
            oInvoice = pcompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices)
            oDelivery = pcompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oDeliveryNotes)
            Try
                If oDelivery.GetByKey(iDlvNo) = True Then
                    sTaxCodes = sTaxCode
                    oInvoice = pcompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders)
                    oInvoice.CardCode = oDelivery.CardCode
                    oInvoice.SalesPersonCode = oDelivery.SalesPersonCode
                    oInvoice.DocType = SAPbobsCOM.BoDocumentTypes.dDocument_Items
                    oInvoice.DocumentSubType = SAPbobsCOM.BoDocumentSubType.bod_None
                    oInvoice.Address = oDelivery.Address
                    oInvoice.ShipToCode = oDelivery.ShipToCode
                    oInvoice.Address2 = oDelivery.Address2
                    oInvoice.JournalMemo = "Invoice - " & oDelivery.CardCode
                    oInvoice.Comments = "Based on Delivery  " & oDelivery.DocNum
                    oInvoice.PaymentGroupCode = oDelivery.PaymentGroupCode
                    oInvoice.DocDueDate = Now.Month & "/" & Now.Day & "/" & Now.Year
                    For iRowNo = 0 To oDelivery.Lines.Count - 1
                        If iRowNo > 0 Then
                            oInvoice.Lines.Add()
                        End If
                        oDelivery.Lines.SetCurrentLine(iRowNo)
                        oInvoice.Lines.ItemCode = oDelivery.Lines.ItemCode
                        oInvoice.Lines.Quantity = oDelivery.Lines.Quantity
                        oInvoice.Lines.Rate = oDelivery.Lines.Rate
                        oInvoice.Lines.BaseType = SAPbobsCOM.BoAPARDocumentTypes.bodt_DeliveryNote
                        oInvoice.Lines.BaseEntry = iDlvNo 'DocEntry of Delivery Note
                        oInvoice.Lines.BaseLine = iRowNo
                        oInvoice.Lines.TaxCode = sTaxCodes
                    Next
                    iReturnValue = oInvoice.Add()
                    If iReturnValue <> 0 Then
                        pcompany.GetLastError(iReturnValue, sErrorDescription)
                        Throw New Exception("Error occured while saving Invoice: " + _
                                           iErrorNo.ToString() + " - " + sErrorDescription)
                    Else
                        MessageBox.Show("Invoice created succesfully")
                    End If
                End If
    Since in the error message it has specified that i have given the BaseType as Delivery which has a value of 15 i changed that from bodt_DeliveryNote to bodt_Order which has a value as 17.
    When i tried creating the invoice again it gave the error
    Error occured while saving Invoice: 0 - Target item number does not match base item number.  [RDR1.TargetType][line: 2]
    I am not able to proceed further ... can any one help me
    thanks in advance
    Ganesh

    Greetings,
    I am having a similar problem, only I'm doing it as suggested in Louis' reply.  In fact I copied that code and tried it.  It's giving me a 2028 error with no description.
    I had been doing it slightly differently and the error I was getting was 5002 "Item no. is missing [INV1.ItemCode][line 2]"  I don't have 2 lines and I'm certain I have an item code.  The numbers I'm putting in for baseentry & baseline are absolutely in the table and the order is open.
    Here is that code:
            oDNUpd = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices)
            oDNUpd.CardCode = CardCode.Text
            oDNUpd.Lines.BaseEntry = CInt(SalesOrder.Text)
            oDNUpd.Lines.BaseLine = CInt(baseline.Text)
            oDNUpd.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
            oDNUpd.Lines.Add()
            lretcode = oDNUpd.Add
    I'm using SBO 2005 patch 7 (and the new dll).  I have similar code doing a stock transfer and it's working fine.
    Thanks for any suggestions you can offer
    John

  • How do I delete old Bex queries not used within 13 months?

    Hello all,
    I have a large number of Bex queries that are no longer used (3000 - three thousand).  I'd like to delete any query that has not been used in 13 months.
    Can someone provide some guidance?
    Also, is there anyway to archive old reports?
    Thank you.
    JIm

    Murali,
    The RSZCOMPDIR table contains this information - thank you.
    The only remaining challenges are:
    1) how do I interpret or convert the values in the LASTUSED field?  The numbers are of the magnitude of 20,060,601,210,130.
    2) Once I determine which queries were not used within the last 13 months, how do I delete them?  Is it as simple as writing a SQL statement against this table?
    Thanks you.

Maybe you are looking for