How to process batch input session through program

Hi Friends,
I am getting 5 batch input sessions in SM35,but I want to process these all sessions through program without going to SM35.
How it is possible through Program?
Please Guide me!
Thanks,
Yogesh

Hi,
It's the report to run the batchinput sessions.
When you create to B.I. session, you can execute it by transaction SM35 (but it uses rsbdcsub) or rsbdcsub.
For example you can use it in the same program where you create B.I.:
Here the code to fill the structures of FI batch input
standard....
...here it creates session...
SUBMIT RFBIBL00 WITH DS_NAME = VA_FILE
WITH CALLMODE = CALLMODE AND RETURN.
....here it runs session....
SUBMIT RSBDCSUB WITH MAPPE = P_NAME
WITH VON = SY-DATUM
WITH BIS = SY-DATUM
WITH FEHLER = ' '
TO SAP-SPOOL
LIST NAME P_NAME
LIST DATASET P_NAME
COVER TEXT P_NAME
NEW LIST IDENTIFICATION ' '
EXPORTING LIST TO MEMORY
AND RETURN.
regards,
Shiva.

Similar Messages

Manual Bank Reconciliation Statement - Processing Batch Input Session

Hi experts,
After processing FF67 transaction, while processing batch input session, system expecting manual clearing of open items in bank sub accounts. If I manually clear, then only it is processing further till end of all transactions in batch input session. Can any one suggest, how to avoid this manual intervention in Batch Input Session, system should map cheque number, amount and clear automatically?
suggestions will be rewarded.
Regards
Sarma BH

Hi Sarma
In FF67 transaction code please select bank postings only check box
If thr anything u want tell me
Please award points if it is useful
Regards
Raju.k

What are the problems in processing batch input sessions?

hi,
What are the problems in processing batch input sessions? How is batch input process different from processing on line?
regards.

sorry, question resolved.

How to delete batch input session still in process since year 2000

Hi All,
in our productive system we have still batch input session in process from year 2000, and I would like to delete them, but how to do this, because the error message is "Unable to schedule session .....".
Thanks for your help

Hi Olivier ,
Such error occurs when you are trying to run session in foreground and some error occurs with connection.
As such these session are not harmful in any way. You can request basis person to remove those sessions.
Regards,
Mohaiyuddin

Batch Input Sessions

Hai all,
What are the problems in processing batch input sessions and How is batch input process different from processing online?
Thanks in Advance,
Swapna.
Edited by: NagaSwapna Thota on Jun 24, 2008 3:11 PM

hi swapna
go through this link hope u find ur answer
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=problemsinbatchinputsession&cat=sdn_all
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=processing+batchinput+session&cat=sdn_all
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=problemsprocessingbatchinput+session&adv=false&sortby=cm_rnd_rankvalue
reward if helpful...
Cheers
Snehi

Batch input session in SM35

Hello,
We are Unable to find the batch input session in the SM35 which is
executed successfully.
User executed T.code S_ALR_87012357 Which automatically triger for
Batch input session in SM35, User successfully executed the Batch input
session in SM35. But later we could not see the Batch input session
under processed tab.
Hence kindly suggest us how to keep the successfully processed batch
input session under Processed tab.
Regards,
Hemanth.

Hi,
In BDC_OPEN_GROUP function module pass the value of KEEP parameter as 'X'.
So you can view the session after successful execution.

RFUMSV50- Error during batch input session

Hello Experts,
I am getting an error after creation of batch input session for program RFUMSV50.
If I run the session in foreground it gives velow error
program successfully worked 3 months back without any error but after that I am facing this type of issues.
Can anyone please guide what exactly missing in the configuration.
Regards,
ps

Hi Salvatore,
I'm in the same situation. I execute a BI, but it stops after a waring appears.
If I proceed the transaction manually, the warning appears, but if I press ENTER the transaction ends successful.
Did you solved your Problem or did you have an hint for me.
Kind regards
Yvonne Adler

How to process a batch input session directly from the program

Hi,
I have developed a program which will create a batch input session.
When the program is executed, the session should get processed . ie. the user need not have to go to sm35 to process the session. I am facing some problem in this.
I am using BDC_INSERT by passing the tcode . The session is getting processed, but when i go to sm35, i noticed that the session is still listed under the "New" tab instead of the "Processed" tab.
Also I am not getting the final window with the buttons " Session overview" and "Exit Batch Input".
Please help me out in this.

Hi
U have to submit the program RSBDCSUB:
SUBMIT RSBDCSUB WITH MAPPE = <session>
                WITH VON   = SY-DATUM
                WITH BIS   = SY-DATUM
                WITH FEHLER = ' '
                    EXPORTING LIST TO MEMORY
                                    AND RETURN.
Max

How to check whether a batch input session is completed in ABAP program

I have created a ABAP program to create a batch input session (reference to RSBDCSUB). After the creation of the batch input session, I kick it to start and read the execution log. However, sometimes I cannot read anything from the execution log as the execution of the batch input is a synchronized process to the execution of my program, i.e. at the time being that I try to read the log of a particular transaction, that transaction is being processing / haven't start processing.
How can I check whether a batch input session is completed in the program?
The code that corresponding to the triggering of batch input session:
SUBMIT (SUBREPORT)
   USER MTAB-USERID
   VIA JOB MTAB-GROUPID
   NUMBER JNUMB
   WITH QUEUE_ID EQ MTAB-QID
   WITH MAPPE     EQ MTAB-GROUPID
   WITH MODUS     EQ 'N'
   WITH LOGALL    EQ LMODUS
Or is there any method to wait here until the process is completed before further processing?

Hi gundam,
1. Or is there any method to wait here until the process is completed before further processing?
There is no such direct method to wait.
2. Immediately after submitting in background,
   we cannot wait
neither can we LOOP and go on detecting
whether the b/g process has completed or not !
3. To over come such problems,
we have to use another technique.
4. we have to submit another
   job which will get triggered
   on event SAP_END_OF_JOB
   ie. when the original job will finish,
our new job will AUTOMATICALLY get triggered,
5. This new job / program
   will do the FURTHER actions !
regards,
amit m.

How to run the Batch input session(SM35) in background thru Report program

Hi Experts,
I am working in one modification report requirement ,the report is Mass upload will update and run the file via batch input session. The client requirement is to implement the report execution in background mode , the batch input session will process automatically (ie. the job runs the batch input session in background and process the session ends).
Currently, the report calls SM35 to write a batch input session and the user manually selects the session and record the transactions.
Once the Transaction enters and the selection-screen inputs are given, then the transaction executed in background mode and all the above batch input process to be implemented.
Please advise and guide me, how to proceed.
I need your guidance to proceed via Call transaction using bdcdata statement, if it can be achieved the requirement.
Thanks & Regards
San.

Hi Arabind Prasad,
Thanks for your inputs.
I know the process of the report Execution in background and job steps.
I want the inputs for how to upload thru Batch input session in background job and the session should also processed automatically
Currently the report logic declared like call transaction 'SM35' and skip first screen.Once the report (tcode) executed (not in background) It writes one session in SM35. The user should select the session and process the transaction manually.
The new requirement is, if the report (tcode) executes in background mode...what and how the batch input session should be declared and how it process automatically (like you said mode 'N').
Hope I am clear in my query.
Please advise.
Regards
San.
Edited by: San Learner on Mar 1, 2011 7:16 PM

BDC programming using Batch input Session.

Hello Experts.
I'm an ABAP beginner. I've benn practicing BDC programming using Batch input Session
at the moment.
This is the program that upload Local file which has plural records, and put the records into a Session.
These are the records.
413459,KIM EI HWAN121                ,19810607,MIADONG1234
423459,KIM EI HWAN122                ,19810607,MIADONG1235
433459,KIM EI HWAN123                ,19810607,MIADONG1236
443459,KIM EI HWAN124                ,19810607,MIADONG1237
453459,KIM EI HWAN125                ,19810607,MIADONG1238
463459,KIM EI HWAN126                ,19810607,MIADONG1239
I succeeded making Session.
However, for some reaseon, every record in the Session has got the same, value which is the first record.
Why is this happening? And How can I correct the code below?
REPORT ZBCUSER002_BATCH NO STANDARD PAGE HEADING
                        LINE-SIZE 255
                        MESSAGE-ID ZBATCH.
= Types definition ===================================================
TYPES: BEGIN OF TYP_LOCAL,               "For Local file upload
         RECORD(200) TYPE C,
       END   OF TYP_LOCAL.
= Internal table definition ==============================================
DATA: BEGIN OF BDC_TAB OCCURS 0.        "BDCDATA itab
        INCLUDE STRUCTURE BDCDATA.
DATA: END   OF BDC_TAB.
DATA: BEGIN OF MESSAGE_BDC OCCURS 0.    "Message itab
        INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END   OF MESSAGE_BDC.
DATA: TBL_LOCAL TYPE STANDARD TABLE OF TYP_LOCAL, "Local file itab
      F_TBL     TYPE FILETABLE.                    "FILETABLE fot local
= Structure table definition =========================================
DATA: STR_F_TBL LIKE LINE OF F_TBL,                "FILETABLE structure
      STR_LOCAL TYPE TYP_LOCAL.                    "Local file structure
= Variable definition ================================================
DATA: LV_RC     TYPE I,                            "Method parameter
      ENUMBER   TYPE ZT601-ENUMBER,                "Employee number
      NAME      TYPE ZT601-NAME,                   "Employee name
      BIRTH     TYPE ZT601-BIRTH,                           "Birthday
      HOMETOWN TYPE ZT601-HOMETOWN,                        "Hometown
      SYSVAL    TYPE SY-SUBRC.                     "System valuible
= Constants definition ===============================================
CONSTANTS: TBL_NAME(10) TYPE C VALUE 'ZT601'.      "Table name ZT601
= Parameters definition ==============================================
PARAMETERS: F_NAME      TYPE RLGRAP-FILENAME OBLIGATORY,    "File path
            EXECMODE(1) TYPE C.                    "Execute mode
INITIALIZATION
*----- Initialize all valuables, structures and internal tables
CLEAR: LV_RC,
       STR_F_TBL,
       STR_LOCAL,
       ENUMBER,
       NAME,
       BIRTH,
       HOMETOWN.
REFRESH: F_TBL,
         TBL_LOCAL.
AT SELECTION-SCREEN
*----- When the button next to Parameter 'F_NAME',
*----- File dialog open.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR F_NAME.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
    EXPORTING
      WINDOW_TITLE            = 'SELECT FILE'
      DEFAULT_FILENAME        = '*.TXT'
   CHANGING
     FILE_TABLE               = F_TBL
     RC                       = LV_RC
    EXCEPTIONS
      FILE_OPEN_DIALOG_FAILED = 1
      CNTL_ERROR              = 2
      OTHERS                  = 3
*----- system valiable check.
*----- If done properly,
*----- Put the path into the File path parameter
IF SY-SUBRC = 0.
    READ TABLE F_TBL INTO STR_F_TBL INDEX 1.
    F_NAME = STR_F_TBL.
*----- If not done properly, show message
*----- An error occured while getting file path then end program
ELSE.
    MESSAGE E000.
ENDIF.
*----- Execute code can only be A or N.
AT SELECTION-SCREEN ON EXECMODE.
IF EXECMODE <> 'A' AND EXECMODE <> 'N'.
    MESSAGE E001.
ENDIF.
START-OF-SELECTION
START-OF-SELECTION.
*----- Upload Local file of file path parameter.
CALL FUNCTION 'GUI_UPLOAD'
       EXPORTING
            FILENAME                = F_NAME
            FILETYPE                = 'ASC'
       TABLES
            DATA_TAB                = TBL_LOCAL
       EXCEPTIONS
            FILE_OPEN_ERROR         = 1
            FILE_READ_ERROR         = 2
            NO_BATCH                = 3
            GUI_REFUSE_FILETRANSFER = 4
            INVALID_TYPE            = 5
            OTHERS                  = 6.
*----- System valiable check.
*----- If not done properly, show an error message
*----- An error occured while uploading local file then end program
IF SY-SUBRC <> 0.
    MESSAGE E002.
ENDIF.
PERFORM BDC_OPEN.
*----- Loop Internal table
LOOP AT TBL_LOCAL INTO STR_LOCAL.
*----- Spilt the file record and put them into each valiable.
    SPLIT STR_LOCAL AT ',' INTO ENUMBER
                                 NAME
                                 BIRTH
                                 HOMETOWN.
*----- Data check Function module
    CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
         EXPORTING
              DATE                      = BIRTH
         EXCEPTIONS
              PLAUSIBILITY_CHECK_FAILED = 1
              OTHERS                    = 2.
*----- When error occurs while checking date, show an error message.
*----- (&1) is not date
    IF SY-SUBRC <> 0.
      MESSAGE E003 WITH BIRTH.
    ENDIF.
*-- The first screen of SE11
*----- Screen number 0102 of program id SAPMSRD0
    PERFORM BDC_DYNPRO      USING 'SAPMSRD0' '0102'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'RSRD1-TBMA_VAL'. "Field on Cursor
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=SHOW'.          "Display button
    PERFORM BDC_FIELD       USING 'RSRD1-TBMA'
                                  'X'.
    PERFORM BDC_FIELD       USING 'RSRD1-TBMA_VAL'
                                   TBL_NAME.                "ZT601
*-- Table definition screen
*----- Screen number 2000 of program id SAPLSD02
    PERFORM BDC_DYNPRO      USING 'SAPLSD02' '2000'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'DD02D-TABCLTEXT'. "Field on Cursor
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=TDED'.            "Create entry
    PERFORM BDC_FIELD       USING 'BDC_SUBSCR'
                                  'SAPLSD02'.
    PERFORM BDC_FIELD       USING 'BDC_SUBSCR'
                                  'SAPLSED5'.
*-- Data input screen
*----- Screen number 0101 of program /1BCDWB/DBZT601
    PERFORM BDC_DYNPRO      USING '/1BCDWB/DBZT601' '0101'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'ZT601-CRUSER'.    "Field on Cursor
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=SAVE'.                  "Save
    PERFORM BDC_FIELD       USING 'ZT601-MANDT'
                                  SY-MANDT.                 "Client
    PERFORM BDC_FIELD       USING 'ZT601-ENUMBER'
                                  ENUMBER.           "Employee number
    PERFORM BDC_FIELD       USING 'ZT601-NAME'
                                  NAME.              "Employee name
    PERFORM BDC_FIELD       USING 'ZT601-BIRTH'
                                  BIRTH.                    "Birthday
    PERFORM BDC_FIELD       USING 'ZT601-HOMETOWN'
                                  HOMETOWN.                 "Hometown
    PERFORM BDC_FIELD       USING 'ZT601-CRDATE'
                                  SY-DATUM.          "System date
    PERFORM BDC_FIELD       USING 'ZT601-CRTIME'
                                  SY-UZEIT.          "System time
    PERFORM BDC_FIELD       USING 'ZT601-CRUSER'
                                  SY-UNAME.          "System user
*-- Data input screen (After input)
*----- Screen number 0101 of program /1BCDWB/DBZT601
    PERFORM BDC_DYNPRO      USING '/1BCDWB/DBZT601' '0101'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/EBACK'.                 "Back
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'ZT601-CRUSER'.    "Field on Cursor
*-- Table definition screen]
*----- Screen number 2000 of program SAPLSD02
    PERFORM BDC_DYNPRO      USING 'SAPLSD02' '2000'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'DD02D-TABCLTEXT'. "Field on Cursor
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=WB_BACK'.               "Back
*-- The first screen of SE11
*----- Screen number 0102 of program SAPMSRD0
    PERFORM BDC_DYNPRO      USING 'SAPMSRD0' '0102'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'RSRD1-TBMA_VAL'.   "Field on Cursor
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=BACK'.
    PERFORM BDC_FIELD       USING 'RSRD1-TBMA'
                                  'X'.
    PERFORM BDC_FIELD       USING 'RSRD1-TBMA_VAL'
                                  TBL_NAME.
    PERFORM BDC_INSERT.
ENDLOOP.
PERFORM BDC_CLOSE.
      FORM BDC_DYNPRO                                               *
      Put Program-Id, Dynpro screen number, Start point
      into DBCDATA
--> PROGRAM                                                       *
--> DYNPRO                                                        *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDC_TAB.
BDC_TAB-PROGRAM = PROGRAM.
BDC_TAB-DYNPRO   = DYNPRO.
BDC_TAB-DYNBEGIN = 'X'.
APPEND BDC_TAB.
ENDFORM.
      FORM BDC_FIELD                                                *
      Put Field Name and Value into BDCDATA
--> FNAM                                                          *
--> FVAL                                                          *
FORM BDC_FIELD USING FNAM FVAL.
CLEAR BDC_TAB.
BDC_TAB-FNAM = FNAM.
BDC_TAB-FVAL = FVAL.
APPEND BDC_TAB.
ENDFORM.
      FORM bdc_process                                              *
FORM BDC_OPEN.
CALL FUNCTION 'BDC_OPEN_GROUP'
       EXPORTING
            CLIENT = SY-MANDT
            GROUP = 'Testsession'
            KEEP   = 'X'
            USER   = SY-UNAME.
IF SY-SUBRC <> 0.
    MESSAGE E006 WITH SY-SUBRC.
ENDIF.
ENDFORM.
      FORM bdc_insert                                               *
FORM BDC_INSERT.
CALL FUNCTION 'BDC_INSERT'
       EXPORTING
            TCODE            = 'SE11'
       TABLES
            DYNPROTAB        = BDC_TAB
       EXCEPTIONS
            INTERNAL_ERROR   = 1
            NOT_OPEN         = 2
            QUEUE_ERROR      = 3
            TCODE_INVALID    = 4
            PRINTING_INVALID = 5
            POSTING_INVALID = 6
            OTHERS           = 7.
IF SY-SUBRC <> 0.
    MESSAGE E007 WITH SY-SUBRC.
ENDIF.
CLEAR: BDC_TAB.
ENDFORM.
      FORM bdc_close                                                *
FORM BDC_CLOSE.
CALL FUNCTION 'BDC_CLOSE_GROUP'
       EXCEPTIONS
            NOT_OPEN    = 1
            QUEUE_ERROR = 2
            OTHERS      = 3.
IF SY-SUBRC <> 0.
    MESSAGE E008 WITH SY-SUBRC.
ENDIF.
ENDFORM.

God I forgot to refresh Internal table after putting record into Session.
Now I'm done.
You guys be careful too.

How to see the Batch input session name in SM35 with User name.

Hi
Yesterday,User has created one Batch input session from FBWE and selected process button after that display errors only tick mark in SM35. Then the system displayed one error message"No Batch input data for screen SAPMF05A 0700".After that he came out from the screen. He dont know what happened.
Today we have verified in SM35. But there is no batch input session with his name. We have verified in incorrect screens and every thing in SM35.
We have verified in Table 'T045DTA'. There are some entries are there.
We dont know the session name also.
How we can find the session name created by the User.
We have not deleted any thing.
Please help me
Thanks
Ravi.

Hi Ravi,
Yes, you should be able to create a new batch job for FBWE. You can see your own batch sessions from SYSTEM ==> OWN JOBS
Regards,
Mike

How do I create a data set ready for a batch input session

Hi:
I don't know how to create a data set ready for an BATCH-INPUT SESSION.I know that with the function BDC_INSERT make de input online, but my requirement is that generate the data set and left to the user get in de SM35 transaccion and decide to him if it's execute or not. I have all the information in a BDCDATA table.
Any clue would be great!!

You just have to do:
BDC_OPEN_GROUP (Open new batch)
BUILD BDC DATA (Your own code)
BDC_INSERT (Insert BDC data you have built in step 2)
BDC_CLOSE_GROUP (Close batch)
This will just create a new batch and it can be processed in SM35.
To build BDC data:
LOOP AT your_input_table.
<<here you have to use the code generated from recording in trasaction SHDB>> (i.e. bdc_dynpro and bdc_field performs)
ENDLOOP.

SM35 - manual processing of the batch input session

Hello,
In SM35 I see that some batch input sessions were processed by user XXX-XXXX (user type:System) (in our case INT-3528) in N mode. The question is: how to determine the exact user who has really processed that session? We need to stop that - I guess - automatic processing of the sessions and process them manually.
Thanks for help,
Slawek

Hi,
also, you can check the logs directly in SM35. So if any documents were posted (or anyting updated in the system) information about what happened should be shown there.
If there were acounting documents (table BKPF), I think the user name will be the same system user "who" has processed the sessions.
I think that your basis team has set up the system in a way that batch input sessions are processed automatically. This is simialr when scheduled jobs are running under a pseudo user name (system user, IT user, not a real person behind). You can ask the basis team to switch off this automatic processing competely or only for selected sessions.
Hope that helps, points welcome
Csaba

Update error after all screens in Batch Input session is processed.

Hi,
I have a problem in processing the batch input session. The batch input session is calling F-02 to post less than 999 line items (around 700) to a single financial document. The batch session is expected to have an error because tax code is missing for some line items but even after the tax code is added manually onto the batch screen, the update error message still happened at the end of the process. In the log, it said "System error: Error when inserting table BSET". Same account has been used to post 10+ line items manually with F-02, no error occurred.
Does anyone have any idea what possible reason could cause the update error in updating the tax table?

Hi Rob,
That is exactly what happened to us. We already had note 521481 in our system but we also have OSS 558288 in which causes our scenario not generating an error message but an update termination instead.
The other thing I found out is once tax code is entering in one of the line items, it will be copied to all the succeeding line items even for the accounts that does not require a tax code (i.e. posting without tax code allowed checked) which will significantly increase the amounts of data posted into BSET.
We fixed the issue by changing the BDC program so it will take out the auto-copied tax code from other line items. Issue is solved. Thank you. I also rewarded the points.
Minami

How to process batch input session through program

Similar Messages

Maybe you are looking for