SM35 - manual processing of the batch input session

Hello,
In SM35 I see that some batch input sessions were processed by user XXX-XXXX (user type:System) (in our case INT-3528) in N mode. The question is: how to determine the exact user who has really processed that session? We need to stop that - I guess - automatic processing of the sessions and process them manually.
Thanks for help,
Slawek

Hi,
also, you can check the logs directly in SM35. So if any documents were posted (or anyting updated in the system) information about what happened should be shown there.
If there were acounting documents (table BKPF), I think the user name will be the same system user "who" has processed the sessions.
I think that your basis team has set up the system in a way that batch input sessions are processed automatically. This is simialr when scheduled jobs are running under a pseudo user name (system user, IT user, not a real person behind). You can ask the basis team to switch off this automatic processing competely or only for selected sessions.
Hope that helps, points welcome
Csaba

Similar Messages

How to run the Batch input session(SM35) in background thru Report program

Hi Experts,
I am working in one modification report requirement ,the report is Mass upload will update and run the file via batch input session. The client requirement is to implement the report execution in background mode , the batch input session will process automatically (ie. the job runs the batch input session in background and process the session ends).
Currently, the report calls SM35 to write a batch input session and the user manually selects the session and record the transactions.
Once the Transaction enters and the selection-screen inputs are given, then the transaction executed in background mode and all the above batch input process to be implemented.
Please advise and guide me, how to proceed.
I need your guidance to proceed via Call transaction using bdcdata statement, if it can be achieved the requirement.
Thanks & Regards
San.

Hi Arabind Prasad,
Thanks for your inputs.
I know the process of the report Execution in background and job steps.
I want the inputs for how to upload thru Batch input session in background job and the session should also processed automatically
Currently the report logic declared like call transaction 'SM35' and skip first screen.Once the report (tcode) executed (not in background) It writes one session in SM35. The user should select the session and process the transaction manually.
The new requirement is, if the report (tcode) executes in background mode...what and how the batch input session should be declared and how it process automatically (like you said mode 'N').
Hope I am clear in my query.
Please advise.
Regards
San.
Edited by: San Learner on Mar 1, 2011 7:16 PM

SM35-Downloading the Logs for the Batch-Input Session

Hi Folks,
I have above 300 Batch-Input sessions imported, and most of them ended with errors, right now I am copying the errors from line to line into excel but this is time consuming. Does any body has a solution to download the logs created through the Batch-Input session into excel sheets. So that I can send through mail to my customer.
Any help would be appriciated.
Thanks in Advance.
Sanjeev.

Okay... I have one more crude way of downloading the log but this will only work if you have the new abap debugger available..
1. Go to SM35
2. Select the session and Click the log button
3. Select the log you want to download, activate debugging and choose display
4. Put a breakpoint at the statement "Call screen 1400."
5. Select "Switch to New ABAP debugger" from the Debugging option in the toolbar
6. Go to the "Tables" tab and enter BDCLM and hit enter
7. Click the "Services of the tool" option. This is the last of the 6 buttons available on the Tables tab besides the table control which displays the contents of internal table BDCLM
8. Choose "Save to local file" option on the following popup
Pretty lengthy and cumbersome approach but I think this is the only option available if you cannot migrate the program to production.
-Kiran

Zfield is not apearing in the batch input session ( Customer Master Record)

Hello,
We have added one Z field in the customer master record (sales are tab). But this Z table not appear in the Batch Input session(SM35). My user want to update this field for all the customers at once, but this Z field not appearing even in MASS transaction.
For your information, we have appended the KNVV table. Can any one of you give some suggestions on this.
Regards,
Srinivas.

It's rather easy via a custom ABAP program to wait for the end of a batch input session. Some codes were already pubilshed (look whole SCN for APQI-QSTATE).
What you can do is to select the sessions to be started via this custom program, and it will submit a job which will run in an endless loop until the last session is released. It might use a WAIT UP TO X SECONDS to sleep for a few seconds between each scan of session status.

How to see the Batch input session name in SM35 with User name.

Hi
Yesterday,User has created one Batch input session from FBWE and selected process button after that display errors only tick mark in SM35. Then the system displayed one error message"No Batch input data for screen SAPMF05A 0700".After that he came out from the screen. He dont know what happened.
Today we have verified in SM35. But there is no batch input session with his name. We have verified in incorrect screens and every thing in SM35.
We have verified in Table 'T045DTA'. There are some entries are there.
We dont know the session name also.
How we can find the session name created by the User.
We have not deleted any thing.
Please help me
Thanks
Ravi.

Hi Ravi,
Yes, you should be able to create a new batch job for FBWE. You can see your own batch sessions from SYSTEM ==> OWN JOBS
Regards,
Mike

How to export the Batch Input Session recording

Hi,
i want to export Batch Input Session Recording created by using LSMW from Developement server to quality.
Plz help.

Hello,
To move to the quality system.
First Import the lsmw in text file in development system.
To import LSMW Tcode u will find Extra option in menu bar from there choose IMPORT PROJECTS.
save the file in desktop.
Second to move to quality system
go to LSMW tcode in quality system.
use EXPORT Projects from same menu bar EXTRA then follow the procedure.
LSMW cannot be transproted

Batch input session in SM35

Hello,
We are Unable to find the batch input session in the SM35 which is
executed successfully.
User executed T.code S_ALR_87012357 Which automatically triger for
Batch input session in SM35, User successfully executed the Batch input
session in SM35. But later we could not see the Batch input session
under processed tab.
Hence kindly suggest us how to keep the successfully processed batch
input session under Processed tab.
Regards,
Hemanth.

Hi,
In BDC_OPEN_GROUP function module pass the value of KEEP parameter as 'X'.
So you can view the session after successful execution.

Batch input session from F.05 has an 'in processing' status

Hello all,
We would like to ask for advice regarding an issue that we are facing right now. We ran F.05 on 9/30/2008. This transaction should create a batch input
session and post revaluation at the end of the month and eventually
reverse them at the beginning of the next month. Unfortunately, as of
the date of the run, period 10 was not yet open. So, the results are
the following:
The batch input created, until now, has an 'in processing' status. 70
transactions were supposed to be processed (but not sure if this is
already the total or it still has some more to process -since we do not
have a record of the supposed number of postings). Now, period 10 is
already open and we are trying to reprocess the session, but it can't
be because of its status.
Looking at the transactions: total is 70 (but not sure if there are
still more to be processed supposedly). 35 transactions (pertaining to
the revaluation postings at the end of the month) have been processed and
their revaluation documents were already produced. 35 transactions (pertaining to the
supposed reversal on the first day of October) are in error because
period 10 was not yet open as of run date. No logs have been created (blank).
In the meantime, can we post manual reversals in October for the revaluation postings made in September? Is there a possibility that there are still revaluations to be processed for September? Let's say, instead of only 35, there are still more? Or another option: could we manually reverse the revaluation postings on September 30 and post on the same date, delete the batch input session (can it be deleted despite the status?), then run the revaluation transaction again for September?
Thanks in advance for your advice.
Regards,
Peter

Hi Peter,
Go to SM35 > Select the session in process > Release session (Shift + F4)
Now select the session again from "Overview" and process again in order to process the remaining documents. Ensure the period is opened.
This should resolve the issue. Let me know how it goes.
Rgds
Nadini

Manual Bank statement-batch input session

Hi experts,
I have done manual bank statement settings and tried entries in Dev server.
Once i post the entries from FF67, I was able to see a session created in SM35.
Once we started using the Prd Server the batch input session is not getting created automatically.
I have checked the Specifications settings where I have already mentioned further processing as a batch in the baground (generate as batch). The Prd server is accessed through VPN.
Once I posted the statement in FF67 in Prd Server, I am not able to see any session created in SM35.
Please help me in resolving this problem.Does it needs any BASIS settings or any thing else?
Points will be awarder for the best.

Thanks for your replies my friends,
Let me clarify few more things..There is no problem with Manual bank statement configuration.
The server is not with the client at the moment. Client is accessing the Prd Server through VPN access.
In the initial screen of FF67, while chosing the Varinat for manual bank statement I have mentioned Run as a Batch in the back ground which is option number 2.
After doing all entries in manual bank statement, the client has saved it and posted. The status in overview says Manually entered only.
But on the next day when I went to my workplace (where Prd server is physically present) I accessed the same posting of the statement and it was successful. A batch got created and the next day I went to clients place and made them process the batch. Again they posted another statement and the again the same problem. (no batch got generated).
Now I feel that the option 2 I have opted (gerate as a batch in the back ground) could be the problem.
Coz the client accessed the server through VPN and was unsucessful in creating batch & I accessed the server through LAN in the office and was successful in generating a batch. Now I am confused whether to change the option 2 to Option 1 which is gerate as a batch-generate online. Please advice me regarding this. Coz I dont want to take risk of changing it without confirmation.
Thanks

Update error after all screens in Batch Input session is processed.

Hi,
I have a problem in processing the batch input session. The batch input session is calling F-02 to post less than 999 line items (around 700) to a single financial document. The batch session is expected to have an error because tax code is missing for some line items but even after the tax code is added manually onto the batch screen, the update error message still happened at the end of the process. In the log, it said "System error: Error when inserting table BSET". Same account has been used to post 10+ line items manually with F-02, no error occurred.
Does anyone have any idea what possible reason could cause the update error in updating the tax table?

Hi Rob,
That is exactly what happened to us. We already had note 521481 in our system but we also have OSS 558288 in which causes our scenario not generating an error message but an update termination instead.
The other thing I found out is once tax code is entering in one of the line items, it will be copied to all the succeeding line items even for the accounts that does not require a tax code (i.e. posting without tax code allowed checked) which will significantly increase the amounts of data posted into BSET.
We fixed the issue by changing the BDC program so it will take out the auto-copied tax code from other line items. Issue is solved. Thank you. I also rewarded the points.
Minami

Batch Input Session for RFUMSV50 is not getting processed.

Dear All,
When i am trying to transfer the Service Tax Inetrim account to Service tax final account with the help of the program RFUMSV50 the batch input session is getting generated without any error. But when i process the same in SM35 it is not getitng processed.
Please advice on this.
Regards,
Rajeswari Shankar.

Hello Rajeswari,
Yes, this is normal.
When batch input sessions is generated with any error, this does not mean that you can execute it after via SM35 without any error
Moreover, you have the option in SM35 to execute it and with option "display error only", so this means that it can happen that there is no error
For example, the profit center is mandatory, and it is missing in the document. In that case the system will display error and ask you to fulfill the profit center
Please tell me, which error you have (message number)
Thanks
Tarek

SM35: Batch-Input Session cannot be released / RSBDCBTC

Hi,
a job with ABAP RSBDCBTC, which processed a batch input session, was cancelled due to system shutdown.
Now the sm35-session has got status 'In processing' and cannot be released ( Message 00299: Could not release folder MM06_XXXX, since it still contains a background job).
A new Job finishes with 'The requested session cannot be processed'.
Is there a possibility to get the batch-input-session released ?
Wolfrad

Hi,
It seems the Batch Input Session had schedule a background job which is still running & hence cannot be released.
Could you please check in transaction SM37 whether any related background job is still running.
Select the job & click on Cancel to stop the job. Then retry to release.
Best regards,
Prashant

At the time of Batch input session system asking business place and profit

Hi,
After doing the transaction f.26 interest calculation on customers (security depost) then we are running the batch input session there system asking business place and profit center there we are giving manually, my client having thousands of customers so they wants update these automatically.
is there any option for automatically updation for business place and profit center.
Kindly give me the solution.
Thanks &Reg
obi

There will be two options.
1. Customize default profit centre for GL
2. Write substitution for profit centre

Batch input session to FB01 using standard program RFBIBL00

Hi all,
I am creating a batch input session using the standard program RFBIBL00 to simulate transaction FB01.
My problem is when I process the "batch input session" (using transaction SM35), this finish ok, but in the log I am retrieving the following message:
"Field BSEG-DMBTR. does not exist in the screen SAPMF05A 0300"
This is a success message and the document is created ok,and the field DMBTR is informed ok.
Has somebody some idea?.
Thanks so much in advance for any answer.

Hi gundam,
1. Or is there any method to wait here until the process is completed before further processing?
There is no such direct method to wait.
2. Immediately after submitting in background,
   we cannot wait
neither can we LOOP and go on detecting
whether the b/g process has completed or not !
3. To over come such problems,
we have to use another technique.
4. we have to submit another
   job which will get triggered
   on event SAP_END_OF_JOB
   ie. when the original job will finish,
our new job will AUTOMATICALLY get triggered,
5. This new job / program
   will do the FURTHER actions !
regards,
amit m.

Error in generating Batch Input session from FF67 Transn

Hi Folks,
I have tried to create the batch input session from transaction FF67 (Process manual bank statement ) using the menu path settings-->specifications and chosen the option 2 for Processing type, after posting the statement manually, batch is not getting created, is there any settings to be configured apart from this, any help would be highly rewarded.
Thanks in Adv.
Rgds,

Hi Dudes,
Any hint on this issue would be highly helpful ,
Thanks in Advance,
Rgds,

SM35 - manual processing of the batch input session

Similar Messages

Maybe you are looking for