How to process Idoc status file within Sap?

Hi All,
We would like to process received status file to update the sent IDOC's. Our current setup is that we send/push the Outbound Idoc to external EDI sub system and pull the status file for processed Idoc from external EDI system to our R/3 server.
Sap Documentation explains the scenario, where this process is triggered from external system using startrfc program, whereas our scenario is to trigger the status update process, once the file is pulled to our system from unix using edi_status_incoming function module.
Your anwers are much appreciated.
Kind Regards,
Sandhya

Hi Sandhya,
Once the Idocs are sent to the EDI Subsystem, the SAP will have the status that the Idoc has reached the partner sub system. I hope, the workflow should be able to trigger back the status file to the SAP System after the Idoc is processed at the EDI Subsystem.
Please check with the workflow that is attached.
Else, if this is using the FM or Message Control, then check the configuration under MN04.
I'm also trying to find the solution for the same.
Regards,
-Syed.

Similar Messages

How to upload a Flat file into sap database if the file is in Appl'n Server

Hello Sap Experts , Can you tel me
" How to upload a Flat file into sap database if the file is in Application Server.
what is Path for that ?
Plz Tel Me its Urgent
Thanks for all

Hi,
ABAP code for uploading a TAB delimited file into an internal table. See code below for structures.
*& Report ZUPLOADTAB                                                  *
*& Example of Uploading tab delimited file                             *
REPORT zuploadtab                    .
PARAMETERS: p_infile LIKE rlgrap-filename
                        OBLIGATORY DEFAULT '/usr/sap/'..
DATA: ld_file LIKE rlgrap-filename.
*Internal tabe to store upload data
TYPES: BEGIN OF t_record,
    name1 like pa0002-VORNA,
    name2 like pa0002-name2,
    age   type i,
    END OF t_record.
DATA: it_record TYPE STANDARD TABLE OF t_record INITIAL SIZE 0,
      wa_record TYPE t_record.
*Text version of data table
TYPES: begin of t_uploadtxt,
name1(10) type c,
name2(15) type c,
age(5) type c,
end of t_uploadtxt.
DATA: wa_uploadtxt TYPE t_uploadtxt.
*String value to data in initially.
DATA: wa_string(255) type c.
constants: con_tab TYPE x VALUE '09'.
*If you have Unicode check active in program attributes then you will
*need to declare constants as follows:
*class cl_abap_char_utilities definition load.
*constants:
*    con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
*START-OF-SELECTION
START-OF-SELECTION.
ld_file = p_infile.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
ELSE.
DO.
    CLEAR: wa_string, wa_uploadtxt.
    READ DATASET ld_file INTO wa_string.
    IF sy-subrc NE 0.
      EXIT.
    ELSE.
      SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
                                      wa_uploadtxt-name2
                                      wa_uploadtxt-age.
      MOVE-CORRESPONDING wa_uploadtxt TO wa_upload.
      APPEND wa_upload TO it_record.
    ENDIF.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
*END-OF-SELECTION
END-OF-SELECTION.
*!! Text data is now contained within the internal table IT_RECORD
* Display report data for illustration purposes
loop at it_record into wa_record.
    write:/     sy-vline,
           (10) wa_record-name1, sy-vline,
           (10) wa_record-name2, sy-vline,
           (10) wa_record-age, sy-vline.
endloop.

What is the Successfull processed IDOC status number?

Hi Experts
What is the Successfull processed IDOC status number?
arjent Please.
Thanks in advance
Sekhar

Hi Chandra,
Below are IDoc Process Codes
For outboud Idocs:
1 IDoc created
2 Error passing data to port
3 Data passed to port OK
4 Error within control information of EDI subsystem
5 Error during translation
6 Translation OK
7 Error during syntax check
8 Syntax check OK
9 Error during interchange handling
10 Interchange handling OK
11 Error during dispatch
12 Dispatch OK
13 Retransmission OK
14 Interchange Acknowledgement positive
15 Interchange Acknowledgement negative
16 Functional Acknowledgement positive
17 Functional Acknowledgement negative
18 Triggering EDI subsystem OK
19 Data transfer for test OK
20 Error triggering EDI subsystem
21 Error passing data for test
22 Dispatch OK, acknowledgement still due
23 Error during retransmission
24 Control information of EDI subsystem OK
25 Processing despite syntax error (outbound)
26 Error during syntax check of IDoc (outbound)
27 Error in dispatch level (ALE service)
28 Not used
29 Error in ALE service
30 IDoc ready for dispatch (ALE service)
31 Error - no further processing
32 IDoc was edited
33 Original of an IDoc which was edited
34 Error in control record of IDoc
35 IDoc reloaded from archive
36 Electronic signature not performed (timeout)
37 IDoc added incorrectly
38 IDoc archived
39 IDoc is in the receiving system (ALE service)
40 Application document not created in receiving system
41 Application document created in receiving system
42 IDoc was created by test transaction
50 IDoc added
For Inound Idocs
51 Error: Application document not posted
52 Application document not fully posted
53 Application document posted
54 Error during formal application check
55 Formal application check OK
56 IDoc with errors added
57 Test IDoc: Error during application check
58 IDoc-Copy from an R/2 connection
59 Not used
60 Error during syntax check of IDoc (inbound)
61 Processing despite syntax error (inbound)
62 IDoc passed to application
63 Error passing IDoc to application
64 IDoc ready to be transferred to application
65 Error in ALE service
66 IDoc is waiting for predecessor IDoc (serialization)
67 Not used
68 Error - no further processing
69 IDoc was edited
70 Original of an IDoc which was edited
71 IDoc reloaded from archive
72 Not used, only R/2
73 IDoc archived
74 IDoc was created by test transaction
Regards,
Satish

How do I create rules files in Sap Data Services

Hello Guys,
I'm new with Bo Sap Development Data Services, and am migrating SSIS packages 2008 for the bods.
I am studying the process of cleanup and word processing via bods.
But I noticed that my installation does not have Rules Files.
My question is:
How do I create rules files in Sap Data Services library with support for Portuguese?

Hello Ramana,
So with version 4.2 of Sap Data Services do not currently have the rules files?
How to mount files for text comparison Cleanse facing Addresses, Names, Clients, Companies? If you can give me some help link?
Thanks again ...

Can anyone pls tell how to process idoc manually ??

hi experts ,
my process chain got failed at INFOPACKAGE STEP ITSELF which updating data from r/3 to cube via dso ... and in IP monitor screen it is showing that "SOME IDOC PROBLEM "
i went to to BD87 and checked for idocs status ..my outbound idoc has problem .... its saying that "error passing data to port "
and on drilling down, it is showing error msg like """code page couldn't find page for receiving system """"".. (with red status )
,if i process these idocs manually ,will it resolve the issue ?? can any one pls tell me how does this error looks like ???
and can you please tell me how to process IDOC MANUALLY ??
IS IT LIKE "SELECTING IDOC --> RIGHT CLIK --> PROCESS" ??????
please help with your suggestions
HELP FULL ANSWERS WILL BE REWARDED WITH POINTS ..
Thanks in advance ....
Harry

1. Status 02 to 03 : RBDAGAIN / Tcode BD83 > Calls IDOC_PROCESS_ERROR function module.
2. Status 30 to 03 : RSEOUT00
3. Status 29 : Problem in ALE settings
You can refer this link for more details : http://goo.gl/p5XPl
See status of record and process below programs using submit report by passing Idoc number
Program RBDMANI2 for status 51 & 52
Program RBDAPP01 for status 64 ,66
Program RBDAGAIE for status 32 and 69 (Edited IDocs)
Program RBDSYNER for status 26
Program RSEOUT00 for status 30
Re-process IDocs failing in 29 status, use program RBDAGAIN.
+ Attention : Use these tcodes with extreme caution+

Hi friends, how to process a text file.?

1)how to process a text file.?

Hi Ganga,
Use following scenarios:-
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-ii
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
/people/divya.vidyanandanprabhu/blog/2005/06/28/converting-xml-to-pdf-using-xi
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
Vishal
Reward points for useful reply

How to process the PDF files at one time

Hello,
I'm using WebDynpro for ABAP and Adobe Interactive Forms as offline forms.
I collect PDF files from received e-mails.
I want them to be taken in at one time.
(for example,
system job read PDF files and create data in ERP,
or I upload the files one time.)
Please let me know
- How to process the PDF files at one time.
Best regards,
Koji

When you click the edit button in recents, try clicking the clear button in the upper left.

How to send IDocs from a non-SAP system to a SAP system

Hi everyone i am new to SAP R/3 System.
Currently i am required to send IDocs from a non-SAP system to a SAP R/3 System.
There is a guide on Cost-Effective and Quick Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interface. But its from a SAP system to a non-SAP system and i am able to do that.
Is there any step by step guide where they teaches you how to send IDocs from a non-SAP system to SAP system via similar method?
Thank You!

Hi,
I hope this link may help you......
http://publib.boulder.ibm.com/infocenter/iisinfsv/v8r1/index.jsp?topic=/com.ibm.swg.im.iis.ds.entpak.sapr3.use.doc/topics/c_pack_r3_Introduction.html

How do to encrypt a file in sAP

hi guys,
How can we encrypt a file in SAP.The input file has a extention of .csv
Can anyone provide help about this Topic . I would be really greatful to any help .
Thanks in advance

hi,
May be you can try these FM.
Use the following FM to encrypt
CALL FUNCTION 'FIEB_PASSWORD_ENCRYPT'
Use the following FM to decrypt
CALL FUNCTION 'FIEB_PASSWORD_DECRYPT'
Hope this is helpful, Do reward.

How to check idoc status through code

Hi All,
Can we check idoc status from within the code? My requirement is that once the idoc is transmitted correctly(status 12) to the system (outbound),I need to update a few fields in my custom table.
Please share some information if available on this.
Thanks and Regards,
Ameya Kulkarni

Hi
The table EDIDC will contain the necessary information. Please check.

How to render a pdf file within flex

Hi,
could any one suggest, how to open a pdf file within flex.
we have an application built on flex3.
please suggest.
regards,
John

Hi,
Is it a Flash or AIR app?
If it's an AIR app, then use the HTML/web, where you then can navigate to the URL of your PDF.
If it's an Flash app, then set the wmode to transparent: http://kb2.adobe.com/cps/127/tn_12701.html#main_Using_Window_Mode__wmode__values_
And then create an iframe in your HTML page, where you load you PDF, set the iframe z-index, so it gets shown on top of the Flash object. Then you kan use the javascript bridge to interact with the iframe.
Best regards
Martin

Incoming Invoice Idoc, how to process payment status?

Hello @ all!!
I have to set up an interface between an SAP and a non-SAP System. As the title indicates, I have to book incoming invoices into SAP (and send outgoing invoices).
I will use the Idoc-type ACC_INVOICE_RECEIPT (will be generated by the non-SAP System and sent to our SAP-System).
So far, so good.
The Problem is: payments?
I have absolutely no idea how I should go about to process payments (made for this invoice).
This 'payment' or 'payment-stop' -information (the date of the paymentas well) should also be transferred between the two systems...
Is there an Idoc-type for that?
Or does anybody have any suggestions to how this could be accomplished?
Thanx a lot guys (and girls of course!)
Greetz!
NoogiE
Message was edited by: Pieter De Fré

Hi Sandhya,
Once the Idocs are sent to the EDI Subsystem, the SAP will have the status that the Idoc has reached the partner sub system. I hope, the workflow should be able to trigger back the status file to the SAP System after the Idoc is processed at the EDI Subsystem.
Please check with the workflow that is attached.
Else, if this is using the FM or Message Control, then check the configuration under MN04.
I'm also trying to find the solution for the same.
Regards,
-Syed.

How to do idoc to file cenario?

Hi,
how we can do idoc to file cenario in sap-xi,
pls explain me?

Hey,
    For Idoc to File Scenario you need to do ALE settings on R3 side as well XI side.
refer to the following Steps.
Steps for ALE settings:-
Steps for XI
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the R3 system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto IDX1.
     Create a new port.
     Give the port name.
     Give the client number for the R3 system.
     Select the created Rfc Destination.
Step 3)
     Goto IDX2
     Create a new Meta data.
     Give the Idoc type.
     Select the created port.
Steps for R3.
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the XI system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto WE21.
     Create a port under transactional RFC.(R3->XI)
     Designate the RFC destination created in prev step.
Step 3)
     Goto SALE.
     Basic settings->Logical Systems->Define logical system.
     Create two logical systems(one for XI and the other for R3)
     Basic settings->Logical Systems->Assign logical system.
     Assign the R3 logical system to respective client.
Step 4)
     Goto WE20.
     Partner type LS.
     Create two partner profile(one for XI the other for R3).
     Give the outbound or inbound message type based on the direction.
Step 5)
     Goto WE19
     Give the basic type and execute.
     fill in the required fields.
     Goto IDOC->edit control records.
     Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
     Click outbound processing.
Step 6)
     Go to SM58
     if there are any messages then there is some error in execution.
     Goto WE02.
     Check the status of the IDOC.
     Goto WE47.
     TO decode the status code.
Step 7)
     Not mandatory.
     Goto BD64.
     Click on Create model view.
     Add message type.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.
Once this is done you can import the idoc in Your XI in the Imported Objects.
Now create the Data type and message type for the receiver file Structure.
Map the Idoc with the receiver file structure.
Do your Interface mapping and the required configuration Steps.
reward points if useful.
regards,
      Milan

How to process large data files in XI ? 100 MB files ?

Hi All
At present we have a scenario as follows
It is File to IDoc ....Problem is the size of the file
We need to transfer 100mb file to SAP R/3 system ? So this huge data how to
process ?
Adv thanx and regards
Rakesh

Hi,
In general, an extra sizing for XI memory consumption is not required. The total memory of the SAP Web Application Server should be sufficient except in the case of large messages (>1MB).
To determine the memory consumption for processing large messages, you can use the following rules of thumb:
Allocate 3 MB per process (for example, the number of parallel messages per second may be an indicator)
Allocate 4 kB per 1kB of message size in the asynchronous case or 9 kB per 1kB message size in the synchronous case
Example: asynchronous concurrent processing of 10 messages with a size of 1MB requires 70 MB of memory
(3MB + 4 * 1MB) * 10 = 70 MB With mapping or content-based routing where an internal representation of the message payload may be necessary, the memory requirements can be much higher (possibly exceeding 20 kBytes per 1kByte
message, depending on the type of mapping).
The size of the largest message thus depends mainly on the size of the available main memory. On a normal 32Bit operating system, there is an upper boundary of approximately 1.5 to 2 GByte per process, limiting the respective largest message size.
please check these links..
/community [original link is broken]:///people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Input Flat File Size Determination
/people/shabarish.vijayakumar/blog/2006/04/03/xi-in-the-role-of-a-ftp
data packet size - load from flat file
How to upload a file of very huge size on to server.
Please let me know , your problem is solved or not..
Regards
Chilla..

How manage outbound IDoc with QRFC in SAP CRM 5.O

Hi experts,
I want to manage outbound IDoc with QRFC. For doing it I selected the flag Query Processing in transaction WE20. When I run the program QRFC Monitor (RSTRFCM1) the system shows this error message:
Status is SYSFAIL.
"[SAP.111.9129] WMSAP Adapter: Missing notification
- Message type: IDOC INBOUND"
Can someone help me?
Thanks a lot in advance,
Lorenzo

Hi,
if you want to find out how to do outbound IDOCs
with qRFC you can check my new book:
/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi
in one of the scenarios it describes exactly what
you're looking for (among other things)
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

How to process Idoc status file within Sap?

Similar Messages

Maybe you are looking for