How to process records one by one(not in parallel) with LSMW(BAPI)

We loaded a batch of records (around 800) in lsmw with biz object method(BAPI).
The records were processed in parallel and this caused some locking issue.
Is there any way to make sure the records in LSMW with biz object method(BAPI) are processed one by one to avoid this kind of locking issue.
Any reply is appreciated.

Hi,
I think there must be something to increase the lead time so that locking doesn't happen and it should be either part of customizing or can be coded,not sure exactly what code as in SAP GUI Scripting also there is a way to increase the lead time to avoid the locking issues.
Regards,
Rahul

Similar Messages

How to process files one by one using sender file adapter

Hi,
I have to process file one by one using my file adapter (sender), because while doing the G/R materials get locked, if the same materal exist in other files.
I have maintained QOS as "Exactly Once in Order" & processing Sequence as "by date".
Processing sequence come in which tab? What will be the Queue name?
Thanks,
krishna

It will come under Processing tab
Here you need to select the first parameter QOS as EOIO
Then QUEUE name and processing sequence will be enabled.
NOTE: This will work only for NFS protocol not for FTP.

How do I install "one note clipper".

I've tried to install one note clipper to my foxfire. First, I don't have a favorites toolbar to add it. Also one note clipper tool does not appear on my add-in list.

If this - https://www.onenote.com/clipper/onenote - is what you are talking about, that is not an extension to "install". It's is a '''bookmarklet''' that needs to be saved to your bookmarks.
http://en.wikipedia.org/wiki/Bookmarklet
Right-click an empty place on one of the "bars" ''(toolbar or tabbar)'' and click on '''Bookmarks Toolbar''' so it is check-marked and appears below the Navigation Toolbar.
Then click&hold that bookmarklet, and drag it to the Bookmarks Toolbar - release the mouse button to save it.

How do I record one track while listening to another?

I've recorded a guitar track. Now I want to layer vocals on top of it. Obviously, I need to hear the guitar track while adding the vocals. How do I do that in GarageBand? If GarageBand can't manage that, which program should I be looking for?

Spencer Lambert wrote:
I need to hear the guitar track while adding the vocals. How do I do that
you need do nothing, just create another track and record on it, all other tracks will play unless they are muted (or other tracks soloed)

How to authorize just one of two devices with one account.

My friends,
I really don't know what forum to post this question: in iPhone, iPod Touch or iTunes.
Well, the problem is simple. I have one Apple Apps account, one iPhone, mine, and an iPod Touch given away to my cousin. Both share the same iTunes library and I've synced in his iPod some of the apps I've bought. The problem is that I don't want my cousin to access less buy Apple apps by himself. I've made him clear that he shouldn't try to access, but he is a rebel boy and insists on accessing and therefore he blocks my account every time he tries guessing my password. How can I remove his iPod Touch authorization to access my account?????
Desperado!!

The iTunes account that is available on an iPhone and iPod Touch is transferred to the device via the iTunes sync process - with the iTunes account that iTunes is logged in to when syncing the device with iTunes.
The only way to resolve this and remove your iTunes account from the Touch is restoring the Touch with iTunes as a new Touch followed by not syncing iTunes content with the same iTunes account. Let your rebel cousin fend for himself with his own iTunes account followed by purchasing and downloading his own iTunes content. That way when trying to be a rebel by purchasing iTunes content with someone else's account and not respecting your wishes - especially after giving him this Touch along with free iTunes account purchased with your iTunes account, he needs to learn what consequences can mean when not respecting you and your wishes. Or take the Touch away from him. I believe it sounds like it is time for some tough love.

How I can insert one row on table, with columns settings: readonly = true

I have a problem. (jdeveloper 11.1.1.2.0)
How I can insert row on table (EditingMode= clickToEdit), with columns settings: ReadOnly = true.
When I make click on button create insert, ADF create one row on the table with output text invisible ( ReadOnly = true.)
I make double click, then output text is visible (ReadOnly = false)
I dont want make double click. I want output text is visible (ReadOnly = false), when I make click on button create insert
Thanks

Hi,
try changing the edit mode of the table when pressing the button and refresh the button. This of course turns the whole table into editable mode, but this is how it needs to work. Alternatively, you create an input form for the user to edit the new record and show the form in a popup or beneath the table. Then when the user submits the created row data, you refresh the table to shwo the new row
Frank

How can I replace one low quality source with another high quality one ?

Am I really this dumb or is it really this hard ?
I have one timeline / project / edit that essentially references one long source clip / event / file.
I have a newer higher quality transcoded version of the same source and want to replace the original lower quality version and end up with the same edited result just with better quality images !?
It's the same frame rate and image dimensions but "relink" tells me the new file is not "similar" enough and won't do it !
Why is this so hard ? Is there a way to export a good old fashioned edl and then just reconform using the new source ?
What if I wanted to to replace low res offline footage with finished colour-corrected material and output a finished master - would that be this clueless as well ?
Please let me know the problem is between the chair and the keyboard - not between the hard disk and the power cord !

Guessing that when you created the higher quality media, it was done outside of FCP and probably changed some important metadata that the app is looking for. Or perhaps there is a difference between the original audio and the new audio.
Anyway, Luis' advice about the replace edit seems like the easiest solution.
a_mumford wrote:
What if I wanted to to replace low res offline footage with finished colour-corrected material and output a finished master - would that be this clueless as well?
The usual way to do offline online is within FCP – creating the proxies and then using Preferences to switch back to and from.
If you sent it out for grading, the Relink should work fine. If you haven't seen this kb doc, it's worth reviewing.
Russ

How to process records in a block without navigating (forms45)

Hi.
I use multi-record block with check boxes to allow operator select row they want to update. How can I process this task? Do I have to use:
First_Record;
loop
when../*record doesn't exist */... exit;
If /*checkbox selected */ then process_record
end if
Next_Record
end loop
But after that I have to navigate to the row I was before and I don't know how to do it.
Or maybe (it would be much better) there is some way to silently process all rows in a block without employing the navigation process. Any advice?
Thanks,
Gregor

DECLARE
currentRecord number := get_block_property('YourBlock', CURRENT_RECORD);
BEGIN
First_Record;
loop
when../*record doesn't exist */... exit;
If /*checkbox selected */ then process_record
end if
Next_Record
end loop
go_record(currentRecord);
END;

How do I insert one file into another with track changes intact?

I gather that Pages does not have a way to insert a file into a document in the way that Word has insert file. So all we can do is copy an entire document and then paste it into the second document. But when I do that I lose the track changes, except for the odd comment. What is the way around this?

I'm assuming you're wanting to insert the contents of one Pages document into another. I don't have a need to use tracking, so I'm not sure if this applies but I think it should.
You can insert sections from one Pages document into another. Open your files & show thumbnails. Sections have a yellow border around all of the pages in that section. Now click on the page in the thumbnail pane & copy. If the file is more than one page & you only want one, you'll need to insert a section break to separate the pages. Then go to your other file, click in the thumbnail pane & paste. If you want to insert the other content into the middle of a section in the receiving document, you will need to insert section breaks at the point you want to insert. The whole copied page will be pasted in. Repeat with another section. Styles will copy over with the sections but headers & footers will not.

How to make a one-color fill images with masks in documents from our multiple layers ?

Hello everyone!
I`m to open PSD document with same layers. I need to:
1. Save the jpg file (preview) in a certain place
2. All layers with masks to make one-color fill instead of images with masks.
Thanks
This is way ?
var theLayers = collectLayers(app.activeDocument, []);
alert (theLayers.join("\n"));
function collectLayers (theParent, allLayers) {//---------------------------------------------------
if (!allLayers) {var allLayers = new Array}
   else {};
   for (var m = theParent.layers.length - 1; m >= 0;m--) {
      var theLayer = theParent.layers[m];
      if (theLayer.typename == "ArtLayer") {
           var bar = new Array;
           bar = theLayer.bounds
           l0= Math.abs(this.app.activeDocument.width - theLayer.bounds[2] - theLayer.bounds[0]);
           l1= Math.abs(this.app.activeDocument.height -theLayer.bounds[3] - theLayer.bounds[1]);
            if((l0+l1)>0) { // layer mask is set
                // delete this layer
                //create new layer
                //create new mask from array bar
                //fill selection
            allLayers.push(theLayer);
   return allLayers

I may not quite follow.
Would you mind posting an example (a screenshot with the Layers Panel visible for example) and an overview of the resulting images you want to produce?

Hp 1210 all-in-one not communicating with word through my mac

my hp 1210 works fine except when i attempt to print a recently modified word document I get an error message that says "word could not communicate with the printer"
I aborted a print job yesterday and the "job hold" in the print queu has a red stop sign symbol...when i click on the jobs it say there are no pending jobs.
I am at a loss for what to do. I tried rebooting and reconnecting the printer and the mac, no change.

Hello JPV626,
Welcome to the HP Support Forums!
I understand that you are having issues printing with the PSC 1210 on your Mac, seems to be a queue issue on the Mac.
What is the Operating System installed on the Mac?
Try resetting the Print System on the Mac (Mac OS X: How to reset the printing system), Repair disk permissions, install any and all updates on the Mac and restart. Once restarted, add the printer back in System Preferences and try printing.
I will look back for your reply.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How can I use one iTunes libary together with PC and Mac?

I do have started to collect my iTunes file on a Mac now, I do have a Mac PowerPC and a PC Notbook. I try to establish a homenetwork and tried to estabilish an external hard drive with the iTunes database. But I do something wrong. It does not work. Please give me a detailed solution. Thanks

Understanding Home Sharing: http://support.apple.com/kb/HT3819
iTunes: Setting up Home Sharing in your computer, http://support.apple.com/kb/HT4620
Troubleshooting Home Sharing: http://support.apple.com/kb/TS2972

And why is it suddenly in english ? I startet from a german installation. How can i protect one E-Mail account with a password may be the office part and give

may be in the office with a password, and give the other free for the rest of the users without password, the master password didn't help here I mean, or the handling for this is not clear to see for me

There is no full or partial password protection that is really more than an inconvenience.
You could however use the operating system permissions, but again whole application would be the result.
I have heard of updates occasionally reverting to English, an install will set it back. http://www.mozilla.org/en-US/thunderbird/all.html as data and program are separate reinstalling will not be an issue.

Officejet 4620 All in one Not printing even with new cartridge

My printer has suddenly stopped printing.
There are no error messages.
My ink level is full.
It slowly started "running" out of ink as I was printing.
New cartridge.
Cleaned printer heads twice.
Ran print quality report and it acted like it was printing but didn't.
Any ideas??

The document here may help resolve black not printing on your Officejet 4620. Be sure to check the vents, if they are blocked the printer will appear to be running out of ink early in the cartridge life.
If the troubleshooting steps there do not resolve the issue I sould suggest you contact HP, 1-800-HPINVENt if you are in the US or see the document here for elsewhere. They may be able to help resolve the issue even if the printer is not in warranty as described in this post.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How can I open one window in Safari with a tab?

When I open Safari, the window opens up but not in a tab. I prefer the single window being in a tab.

I'm guessing you're talking about new Safari windows are opening up in Windows rather than tabs..
Go to Safari > Preferences > Tabs tab > set the option there.
Regards,
Captfred

How to process records one by one(not in parallel) with LSMW(BAPI)

Similar Messages

Maybe you are looking for