How to program multiple "if" conditions?
Hi,
Could someone please tell me or give an .vi example of how to program simple comsprison cases:
I have a FOR cycle which iterates from 300 to 800. I need to do different tasks when the iteration becomes 400, 500, 600 and 700. How to that in simplest and nicest way?
Thanks in advance.
Solved!
Go to Solution.
Use a case structure and wire the number to the case selector. Now make cases for
...299 (default)
300..399
400..499.
500..599
600.699
700..
See how far you get.
This assumes you want to switch to a different task and keep it until the next level.
(If you want to do a different ask only at specific single iterations, you would only make single numer cases, of course. Your descriptions can be interpreted both ways, so it's not entirely clear.)
Message Edited by altenbach on 10-15-2008 08:17 AM
LabVIEW Champion . Do more with less code and in less time .
Similar Messages
-
How to add multiple test conditions in 'test' attribute expression of xsl:if tag
Hi all,
How to add multiple test conditions in 'test' attribute expression of <xsl:if> tag ?
I have 2 parameters and I want To skip the massage if this 2 conditions happened I tried to write it :
<xsl:when test="($TransferToCompany = 0 and $ObjectInclide=1 )">
<b1im_skip xmlns="" info=" Obect Will Not Transfer To company">
</b1im_skip>
</xsl:when>
But I get an error while I am trying to transfer The object (Account) true B1if
I am working with SBO 9 PL 13
thank you
shacharHi saado
Check this link:
http://stackoverflow.com/questions/318875/can-you-put-two-conditions-in-an-xslt-test-attribute
Kind regards,
Radek -
How to update multiple Price conditions in FM CRM_ORDER_MAINTAIN
Hi All,
need to update multiple price conditions in a contract Thru FM CRM_ORDER_MAINTAIN.
please see the piece of code that am using...
am able to update single price condition...but not able to populate 2 or more .......i,e..ADD A Condition
i,e...DATA : ls_cond TYPE prct_cond_external_input,
lt_cond TYPE prct_cond_external_input_t.
DATA : ls_con TYPE PRCT_COND_DU,
lt_con TYPE PRCT_COND_DU_TAB.
Create Condition Type
*ls_con-KNUMV = lv_header_guid.
*ls_con-KPOSN = lv_item_guid.
ls_con-stunr = '134'.
IF Y EQ 1.
ls_con-ZAEHK = '001'.
ELSE.
ls_con-ZAEHK = '002'.
*ENDIF.
*ls_con-kschl = 'ZFP1'.
**ls_cond-waers = 'CNY'.
*ls_con-kbetr = '0.00'.
*ls_con-kpein = '1'.
ls_cond-kschl = 'ZFP1'.
ls_cond-waers = 'CNY'.
ls_cond-kbetr = '0'.
ls_cond-kpein = '1'.
ls_cond-knumh = lv_item_guid .
CLEAR ls_Price_doc.
ls_Price_doc-ref_guid = lv_item_guid.
ls_Price_doc-ref_kind = 'A'.
IF Y EQ 1.
ls_Price_doc-ref_handle = '000000001'.
ELSE.
ls_Price_doc-ref_handle = '000000002'.
ENDIF.
*ls_price_doc-PRIC_COND[] = lt_cond[].
*INSERT ls_con into table ls_price_doc-PRIC_COND.
INSERT ls_cond into table ls_price_doc-COND_ADD.
INSERT ls_price_doc INTO TABLE lt_price_doc.
ls_input_fields-ref_guid = lv_item_guid.
ls_input_field_names-fieldname = 'KNUMH'.
INSERT ls_input_fields INTO TABLE lt_input_fields.
ls_input_field_names-fieldname = 'KPOSN'.
INSERT ls_input_fields INTO TABLE lt_input_fields.
ls_input_field_names-fieldname = 'KSCHL'.
INSERT ls_input_fields INTO TABLE lt_input_fields.
ls_input_field_names-fieldname = 'KPEIN'.
INSERT ls_input_fields INTO TABLE lt_input_fields.
ls_input_field_names-fieldname = 'STUNR'.
INSERT ls_input_fields INTO TABLE lt_input_fields.
ls_input_field_names-fieldname = 'ZAEHK'.
INSERT ls_input_fields INTO TABLE lt_input_fields.
ls_input_field_names-fieldname = 'WAERS'.
INSERT ls_input_fields INTO TABLE lt_input_fields.
ls_input_field_names-fieldname = 'KBETR'.
INSERT ls_input_fields INTO TABLE lt_input_fields.
CLEAR ls_input_fields.
Ls_input_fields-ref_guid = lv_item_guid.
ls_input_fields-ref_kind = 'B'.
ls_input_fields-objectname = 'PRIDOC'.
*ls_input_fields-logical_key = '0001'.
ls_input_fields-field_names = lt_input_field_names.
INSERT ls_input_fields INTO TABLE lt_input_fields.
CLEAR ls_input_fields.
CLEAR ls_Price_agreement.
Clear ls_cond.
I kept this under code. loop, for item records.....
Though the internal table lt_price_doc. is holding all the records, it is updating only one record. can you any one pls guide me ,This example works fine for me. Modify it according to your needs...
Price
IF it_item-value IS NOT INITIAL.
ls_cond-kschl = 'PR00'. " add price
ls_cond-kbetr = it_item-value.
ls_cond-waers = st_head-currency.
INSERT ls_cond INTO TABLE ls_pridoc_com-cond_add.
index_2 = 1.
CLEAR: ls_cond.
ENDIF.
Discount
IF it_item-discount IS NOT INITIAL.
ls_cond-kschl = 'ZPPP'. " add discount
wa_procent_calc = it_item-discount * 10.
ls_cond-kbetr = wa_procent_calc."it_item-discount.
ls_cond-waers = '%'."st_head-currency.
INSERT ls_cond INTO TABLE ls_pridoc_com-cond_add.
index_2 = 1.
CLEAR: ls_cond, wa_procent_calc.
ENDIF.
IF index_2 = 1.
ls_pridoc_com-ref_handle = counter.
ls_pridoc_com-ref_kind = 'B'.
INSERT ls_pridoc_com INTO TABLE gt_pridoc_com.
CLEAR: index_2,ls_pridoc_com.
ENDIF. -
How to use multiple search conditions in the where clause
Hi,
Below is my query
/****** Script for SelectTopNRows command from SSMS ******/
SELECT distinct
ctacct,sum(GLMN02)
FROM [ODS].[Staging].[tODS_INF_GLPCT]
inner join
[ODS].[Staging].[tODS_INF_GLPGL] ON tODS_INF_GLPCT.CTPAGE = tODS_INF_GLPGL.GLPAGE
where
CTACCT like '[0-9][0-9][0-9]-[0-9][0-9][0-9]-63020-4110%'
This one gives me the exact result i want, now if i add one more to my where clause like this
/****** Script for SelectTopNRows command from SSMS ******/
SELECT distinct
ctacct,sum(GLMN02)
--,ctdesc,CTPAGE
--SUM(GLMN02)
FROM [ODS].[Staging].[tODS_INF_GLPCT]
inner join
[ODS].[Staging].[tODS_INF_GLPGL] ON tODS_INF_GLPCT.CTPAGE = tODS_INF_GLPGL.GLPAGE
where
CTACCT like'[0-9][0-9][0-9]-[0-9][0-9][0-9]-63020-4110%' or
CTACCT like '[0-9][0-9][0-9]-[0-9][0-9][0-9]-63020-4115%'
This query doesnt give me the exact values instead it gives me all the weird values.Can someone please help me with how to work on this where clause?
ThanksHi Patrick,
This is what i ve tried earlier and it isnt working .If i use the first query
/****** Script for SelectTopNRows command from SSMS ******/
SELECT distinct
ctdesc,SUM(GLMN02)
--,ctdesc,CTPAGE
--SUM(GLMN02)
FROM [ODS].[Staging].[tODS_INF_GLPCT]
inner join
[ODS].[Staging].[tODS_INF_GLPGL] ON tODS_INF_GLPCT.CTPAGE = tODS_INF_GLPGL.GLPAGE
where
CTAcct LIKE '[0-9][0-9][0-9]-[0-9][0-9][0-9]-63020-4110%'
--OR
--CTAcct LIKE '[0-9][0-9][0-9]-[0-9][0-9][0-9]-63020-4115%'
and GLYEAR = 2014
and CTDESC = 'Sales'
group by ctdesc
The result set is
Sales
-182273.96
And if i use the second query
SELECT distinct
ctdesc,SUM(GLMN02)
--,ctdesc,CTPAGE
--SUM(GLMN02)
FROM [ODS].[Staging].[tODS_INF_GLPCT]
inner join
[ODS].[Staging].[tODS_INF_GLPGL] ON tODS_INF_GLPCT.CTPAGE = tODS_INF_GLPGL.GLPAGE
where
CTAcct LIKE '[0-9][0-9][0-9]-[0-9][0-9][0-9]-63020-4110%'
OR
CTAcct LIKE '[0-9][0-9][0-9]-[0-9][0-9][0-9]-63020-4115%'
and GLYEAR = 2014
and CTDESC = 'Sales'
group by ctdesc
The result set i get is
Sales
-1455441.08
And i verified that CTAcct LIKE '[0-9][0-9][0-9]-[0-9][0-9][0-9]-63020-4115%'
this second line of where clause has not desc as Sales.
I am not sure whats causing the difference in the values.
Can you please help me with this?
Thanks -
How to program voicemail prefix, night service,multiple-line appearance on BE3K?
Hi All,
A few questions about BE3K as below :
1. What’s the default prefix for voicemail in BE3K ? or how to program prefix for voicemail in BE3K ?
In UC500, we can manually program a prefix number or code such as “6” , then dial "6" + extension to access to that extensions' voicemail from any subscribed phone. We often use this "voicemail code + extension" as night switch VM.
2. How to program night service/schedule in BE3K?
I understand there is day/night service on Auto Attendant setting what if customer dosen't want caller to hear any AA greeting or option 1, 2, 3 , most of customers just simply want to caller reach a hunt group during the day and a voicemail greeting during the night ( again, how to program night switch VM?)
3. How to program multiple - line appearance on BE3K ?
You are more than welcomed to give answers or point me to right directionBilly,
On 3....
A user can "own" multiple lines. These are provisioned on the user page. (Note that this is not required to have multiple lines on a phone, but is a way to assign multiple lines to a user if that is desired when sharing lines on a phone.)
One the phone configuration page, just keep adding more lines to the phone in the "extensions" area.
When adding more lines to a phone, if you enter the same extension multiple times, then the phone enters a "roll-over" mode. In this mode, each line (of the same extension) will only allow one call. The next call then appears on the next line on the phone of that extension. Some customers prefer this mode of behavior.
When using roll-over mode, be sure to take into account any other phone that shares that extension. You'll want both phones to be in roll-over mode. If one phone is in multi-call mode for that extension (the extension appears on the phone only once), and another phone has the same extension in roll-over mode (the extension appears more on the phone more than once), then while both phones will ring with the first call, only the first phone (mult-call mode) will ring if a second simultaneous call arrives. This is because in roll-over mode, the second phone cannot handel the second call, and wants to forward it to the next line appearance. However, the first phone (multi-call mode) can handle the call on that line. So, the second call is offered to that phone without forwarding to the next line appearance.
If you want to mix these two modes, configure two phones with the same line (shared line) and setup the two phones differently, one in roll-over mode, and the other with just one line appearance. Then, use other phones to call that extension so that you can experiance the behavior first hand. It can be a bit confusing to get a problem report from one of your end users because of this missconfiguration. Seeing it first hand will help you recognize if you ever accidentally enter this configuration. This missconfiguration cannot be prevented as you pass through it when assigning lines to phones. However, the GUI does not warn you that you are in this configuration. -
How to use multiple values in an IF condition in RTF
Hi,
I have a scenario as mentioned below.
IF column value in ('A','B')
display C;
end if
IF column value not in ('A','B')
display D;
end if
My query is how to provide multiple values in an IF condition.?
Thanks,
AnandBut suppose "x.jar" needs a library from "y.jar". How do you put another JAR on the classpath of an applet in a Web page?
<applet code="z.class" archive="a.jar,b.jar,c.jar"> -
How to select multiple values from the Parameters in the concurrent program
How to select multiple values from the Parameters defined in the concurrent program...and i believe multiple selection is not a direct feature of EBS, but is there any workaround solution to acheive mulitple selection?
I think there's no way to do that using standard feature.
Some workaround I use :
1. If the number of selections are fixed, you could use multiple parameters for the same valueset. For example :
Selection1 : <choose first selection>
Selection2: <choose 2nd selection>
..etc.
If you don't use it then leave it empty.
2. Use text varchar valueset and enter it manually and separate by comma (or other value) , eg : selection1,selection2,selection3....etc. -
How to find the start condition of a ABAP program?
Hello Gurus!,
Could any one please explain how to find the start condition of a ABAP program?
like its a event based or time based?and also how to find that event and time..
Thanks in Advance...
DinakarHi Dinkar,
Go to Job Schedule, put Job Step parameter as your program and see scheduled Job.
In Schedule Job double click to see start condition. and steps to see details and variant.
Hope it helps.
Thanks
CK -
How to send multiple customer statements by email using RFKORD11 program.
Hi All,
How to send multiple customer statements by email using RFKORD11 program. Is it possible?
As of now we copied the stanadard program and sending the customer statements by email, one by one.
if i execute the z program it will show the customer statement and send mail option.
if i click send mail it will send that customer statement to the corresponding customer.
then again i need to click back, it will show next customer statement and click on send mail.
Pl guide me, if any one worked on this program.
thanks in advance.
Regards,
MaheshTry execute the program in the background to see if that helps.
-
How to uplaod multiple excel sheets in a program
Hi gurus,
Can anyone suggest me
how to upload multiple excel sheets in program.( not in OOPS)
my excel sheets has 5 sheets like sheet1, sheet2, sheet3 ....like this..
Thanks & Regards
kalyan.swc_container it_event_container.
swc_create_container it_event_container.
CALL FUNCTION 'SWW_WI_CONTAINER_READ'
EXPORTING
wi_id = wd_id
TABLES
wi_container = it_event_container
EXCEPTIONS
container_does_not_exist = 1
read_failed = 2
OTHERS = 3.
if sy-subrc = 0.
READ TABLE it_event_container WITH KEY element = 'name of your workflow container element'.
IF sy-subrc = 0.
w_variable= it_event_container-value.
ENDIF.
endif.
Regards
Kedar -
How to invoke multiple sessions of sql*plus thru pl/sql program
Hi
How to invoke multiple sessions of sql*plus thru pl/sql program.
ThanksHow to invoke sql*plus in a procedure?????
I have to invoke more pl/sql sessions?????No you don't "have to".
Look at what you are trying to do.
You have a program running inside the PL/SQL engine. This is running nicely inside the Oracle database and is perfectly capable of issuing other SQL statements, PL/SQL programs etc. inside it's nice cosy Oracle environment.
You are asking for this PL/SQL to shell out to the operating system, run an external application, for which it will have to supply a username and password (are you planning on hard coding those into your PL/SQL?), and then that external application is supposed to run more SQL or PL/SQL against the database.
a) Why hold all this code external to the database when it can quite happily reside on the database itself and be executed through jobs or whatever.
b) Consider what would happen if someone were to replace the external application with their own program of the same file name... they'd be able to capture the username and password for connecting to the database, therefore a major security flaw.
The whole idea of doing what you want through external calls to SQL*Plus is ridiculous. -
How to store multiple files from SAp in to Application server?
Hi Guys,
Can anybody tell me how to store multiple files from SAP into Application server.in my application i have to get the data from SAP tables BSEG , BKPF , BSAK and BSIK that to daily i have to do.
Any Logic or Code for how to do is welcomed.
plz help me urgently.
Thanks,
GopiHi,
directories creates basis. If you have task to store data in application server you already should have information into which folder you have to do it. If you don't have this information because it is just for example training for next task then you can use your personal folder into which you have access. To get list of all available folders please look at attached code and form get_directories (you get the list of folders you see in transaction AL11). But don't forget: If you are using open dataset you have to have rights to access application folder!
Here you are code which I use to upload text files from local disc into application folder
Regards,
Karol
*& Report FILE_PC_TO_SAP
REPORT FILE_PC_TO_SAP.
DATA: BEGIN OF searchpoints OCCURS 100,
DIRNAME(200) TYPE c, " name of directory.
sp_name(100) TYPE c," name of entry. (may end with *)
END OF searchpoints.
DATA: BEGIN OF isearchpoints OCCURS 10,
dirname(75) TYPE c, " name of directory.
aliass(75) TYPE c, " alias for directory.
svrname(75) TYPE c, " svr where directory is availabl
sp_name(75) TYPE c, " name of entry. (may end with *)
sp_cs(10) TYPE c, " ContainsString pattern for name
END OF isearchpoints.
data: l_file type filetable.
data: l_rc type i.
data: itab type TABLE OF string.
data: g_tmp_file_path type rlgrap-filename.
data: wa_itab type string.
data: h_destin(100) type c.
data: dat type string.
INITIALIZATION.
perform get_directories.
START-OF-SELECTION.
parameters: in_file type string OBLIGATORY LOWER CASE.
parameters: destin(100) type c OBLIGATORY LOWER CASE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = in_file
"FILETYPE = 'BIN'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = ' '
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
TABLES
DATA_TAB = itab
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
IF sy-SUBRC <> 0.
write: / 'Error during loading input file!'.
ENDIF.
if h_destin is INITIAL.
h_destin = in_file.
endif.
CONCATENATE destin h_destin into dat SEPARATED BY '/'.
*TRANSLATE dat TO UPPER CASE.
OPEN DATASET dat FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-SUBRC = 0.
loop at itab into wa_itab.
TRANSFER: wa_itab TO dat.
endloop.
CLOSE DATASET dat.
write: / 'File uploaded!'.
ELSE.
write: / 'Not possible to open dataset'.
ENDIF.
at selection-screen on value-request for in_file.
perform select_input_file_name.
loop at l_file into g_tmp_file_path.
move g_tmp_file_path to in_file.
h_destin = ''.
SPLIT g_tmp_file_path at '\' into table itab.
loop at itab into g_tmp_file_path.
h_destin = g_tmp_file_path.
endloop.
endloop.
at selection-screen on value-request for destin.
DATA: lt_dfies TYPE TABLE OF dfies.
DATA: lwa_dfies TYPE dfies.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
EXPORTING
tabname = '/BI0/PCO_AREA'
lfieldname = 'CO_AREA'
IMPORTING
dfies_wa = lwa_dfies.
lwa_dfies-tabname = 'searchpoints'.
lwa_dfies-REPTEXT = 'Destination directory'.
lwa_dfies-LENG = 100.
lwa_dfies-INTLEN = 100.
lwa_dfies-OUTPUTLEN = 100.
lwa_dfies-fieldname = 'SP_NAME'.
APPEND lwa_dfies TO lt_dfies.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'SP_NAME'
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'destin'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = searchpoints
FIELD_TAB = lt_dfies
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
*& Form select_input_file_name
* text
form select_input_file_name.
* call function 'F4_FILENAME'
* exporting
* program_name = sy-repid
* dynpro_number = sy-dynnr
* field_name = 'PATH'
* importing
* file_name = g_tmp_file_path.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'Please choose a file'
"default_extension = '*.TXT'
"default_filename = 'C:\*.txt'
initial_directory = 'C:\'
file_filter = '*.*'
CHANGING
FILE_TABLE = l_file
RC = l_RC
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
NOT_SUPPORTED_BY_GUI = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. "select_input_file_name
*& Form WRITE_DB_HOME
* Write DB home directory
* no parameters
FORM write_db_home.
CASE sy-dbsys(3).
WHEN 'ORA'.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ORAHOME'
ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_ORAHOME', 30 searchpoints-dirname.
MOVE: 'DIR_ORAHOME' TO searchpoints-sp_name.
APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
WHEN 'ADA'.
CALL 'C_GETENV' ID 'NAME' FIELD 'DBROOT'
ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_ADA_DBROOT', 30 searchpoints-dirname.
MOVE: 'DIR_ADA_DBROOT' TO searchpoints-sp_name.
APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
WHEN 'INF'.
CALL 'C_GETENV' ID 'NAME' FIELD 'INFORMIXDIR'
ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_INF_INFORMIXDIR', 30 searchpoints-dirname.
MOVE: 'DIR_INF_INFORMIXDIR' TO searchpoints-sp_name.
APPEND searchpoints..
*--- C5056155 End of ALV -------------------------------*
WHEN 'DB6'.
CALL 'C_GETENV' ID 'NAME' FIELD 'INSTHOME'
ID 'VALUE' FIELD searchpoints-dirname.
IF sy-subrc = 0.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_DB2_HOME', 30 searchpoints-dirname.
MOVE: 'DIR_DB2_HOME' TO searchpoints-sp_name.
APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
ELSE.
EXIT.
ENDIF.
WHEN OTHERS.
EXIT.
ENDCASE.
ENDFORM. " WRITE_DB_HOME
FORM get_directories.
* get the name and aliases of ALL userdefined directories
SELECT * FROM user_dir INTO isearchpoints
WHERE svrname = sy-uname.
MOVE isearchpoints-dirname to searchpoints-dirname.
MOVE isearchpoints-aliass to searchpoints-sp_name.
APPEND searchpoints.
ENDSELECT.
SELECT * FROM user_dir INTO isearchpoints
WHERE svrname = 'all'.
MOVE isearchpoints-dirname to searchpoints-dirname.
MOVE isearchpoints-aliass to searchpoints-sp_name.
APPEND searchpoints.
ENDSELECT.
* Get DB home
IF sy-dbsys(3) = 'ADA'.
PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ATRA'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ATRA' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_BINARY'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_BINARY' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory $DIR_CCMS
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CCMS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CCMS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_LOGGING'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_LOGGING' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_RUN'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_RUN' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DATA'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DATA' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'DB6'.
PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DBMS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DBMS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXECUTABLE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXECUTABLE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXE_ROOT'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXE_ROOT' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN_ROOT'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN_ROOT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GLOBAL'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GLOBAL' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_EXE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_EXE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_LIB'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_LIB' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_HOME'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_HOME' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'INF'.
PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTALL'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTALL' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTANCE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTANCE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LIBRARY'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LIBRARY' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LOGGING'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LOGGING' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the files written by the memory inspector
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_MEMORY_INSPECTOR'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_MEMORY_INSPECTOR' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'ORA'.
PERFORM write_db_home.
ENDIF.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PAGING'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PAGING' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PUT'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PUT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PERF'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PERF' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROFILE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROFILE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROTOKOLLS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROTOKOLLS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_REORG'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_REORG' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ROLL'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ROLL' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_RSYN'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_RSYN' TO searchpoints-sp_name.
APPEND searchpoints.
* calculate directory for saphostagent (no sapparam available...)
IF ( sy-opsys(3) = 'WIN' ) OR ( sy-opsys(3) = 'Win' ).
DATA: windir_path(64), programfiles_path(64).
* hoping that ProgramFiles is set in service user environment
CALL 'C_GETENV' ID 'NAME' FIELD 'ProgramFiles'
ID 'VALUE' FIELD programfiles_path.
IF programfiles_path IS INITIAL.
* %ProgramFiles% not available. guess from windir
CALL 'C_GETENV' ID 'NAME' FIELD 'windir'
ID 'VALUE' FIELD windir_path.
* e.g. S:\WINDOWS ==> S:\Program Files
CONCATENATE windir_path(3) 'Program Files' INTO programfiles_path.
ENDIF.
CONCATENATE programfiles_path '\SAP\hostctrl'
INTO searchpoints-dirname.
ELSE.
* on UNIX, the path is hard coded
searchpoints-dirname = '/usr/sap/hostctrl'.
ENDIF.
MOVE: 'DIR_SAPHOSTAGENT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SAPUSERS'
ID 'VALUE' FIELD searchpoints-dirname.
IF searchpoints-dirname = '.'.
IF sy-opsys = 'Windows NT'.
searchpoints-dirname = '.\'.
ELSE.
searchpoints-dirname = './'.
ENDIF.
ENDIF.
MOVE: 'DIR_SAPUSERS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SETUPS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SETUPS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SORTTMP'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SORTTMP' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SOURCE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SOURCE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TEMP'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TEMP' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRANS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRANS' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRFILES'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRFILES' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRSUB'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRSUB' TO searchpoints-sp_name.
APPEND searchpoints.
* get the name of the current server.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'rdisp/myname'
ID 'VALUE' FIELD searchpoints-dirname.
data: h_ind type i.
LOOP AT searchpoints.
h_ind = sy-tabix.
IF searchpoints-sp_name IS INITIAL.
DELETE searchpoints INDEX h_ind.
ENDIF.
ENDLOOP.
ENDFORM. -
How to use multiple JREs (1.5.0_20 and 1.6.0_07) with Internet Explorer 8?
Hi!
Question about the problem mentioned in subject.
I have configured that JNLP opens with 1.5 version, both versions are enabled in Java Control Panel Runtime Settings but when I try to start a desktop java console says:
Java Web Start 1.5.0_22
Using JRE version 1.6.0_07 Java HotSpot(TM) Client VM
And the opening of the desktop creates an exception:
Java Web Start - Invalid Argument Error
TooManyArgumentsException[ Too many arguments supplied: {C:\WINDOWS\Temporary, Internet, Files\Content.IE5\....
I'm trying to open my desktop with 1.5 version and other programs with 1.6 version. What is it that I still need to do? I'm kind of confused with this. Some of my collagues have succeeded with this and some doesn't, with the same configuration.
So the question is, how to use multiple JREs with IE8 so that one application uses 1.5 version and others 1.6 version?
Br,
Katri
Edited by: ka**** on 09-Mar-2011 01:16
Edited by: ka**** on 09-Mar-2011 03:16ka**** wrote:
..Question about the problem mentioned in subject.No "Using multiple JREs (1.5.0_20 and 1.6.0_07) with Internet Explorer 8" is a statement. To transform it to a question would be something like "How to use multiple JREs (1.5.0_20 and 1.6.0_07) with Internet Explorer 8?".
Once you can come up with an actual question, I might look at this more closely. -
How to use multiple table in single control file?
Hi,
How to use multiple table and data file in sigle control file? I have a four table and four csv file i mean data file for that. I am running concurrent program to load the data from csv file to custom table. based on my input data file name, it has to take automatically from one control file.
Can anyone share with me how can i acheive this?
ThanksHi,
Can't we acehive like below. I don't this exactly corrcect.
OPTIONS (SKIP=1)
LOAD DATA
INFILE << file name 1 >>
APPEND INTO TABLE XXCZ_VA_SAMPLE1
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
PARENT_ITEM "TRIM(BOTH FROM :PARENT_ITEM)"
LOAD DATA
INFILE << file name 2 >>
APPEND INTO TABLE XXCZ_VA_SAMPLE2
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
ITEM_NUMBER "TRIM(BOTH FROM :ITEM_NUMBER)"
)Edited by: orasuriya on Sep 14, 2009 3:03 AM -
How to delete multiple photos from updated iPhoto
How to delete multiple photos from the updated iPhoto
1 - there is no updated iPhoto - iPhoto is still on your computer and version 9.6.1 is probably the last version - there are no updates planned to iPhoto
2 - Photos is a new photo management program built into OS X 10.10.3
3 - Assuming you are talking about Photos select the photos and press delete - they then go to the recently deleted photos album (show recently deleted under th file menu) where they sit for 30 days and then are automatically deleted unless you manually delete them first
LN
Maybe you are looking for
-
When I try to import .swf files into Captivate 4, I get the following error message: The Adobe Flash File contains action script that references 'root'. This might cause the Adobe captivate project to work incorrectly or to stop working. Do you want
-
OPM : How to add appraisal data maintained in offline
In Oracle Performance Management, do we have provision for the PMP admin to add the appraisal details which are done for certain group of Employee in offline. DO we have any mass update of appraisal for certain employee group. In Performance Manageme
-
Hi Guru's, We have requirement where the text of the infoobject has to be converted to medium text.Its the one what we set during the creation of Infobjct in RSA1. ie In Master data tab and also in Business explorer tab. Thanks in advance.
-
Return procedure in STO plant to plant with billing(single co code)
Hi, I'm doing STO plant to plant with billing in one company code. But I have one query. Suppose I'm in plant B(Receiving). From plant A(Supplying), I have received material. I've done goods receipt But after that I found few material defective & now
-
Hey friends,never and ever get Asha series phones. They are just a nice piece of **bleep**.The best example is Nokia Asha 501. 1.Just reset your 501 phone and check it,Your APPNOW app will be missing 2.Also the browser will be lost.(these are few def