How to use multiple table in single control file?

Hi,
How to use multiple table and data file in sigle control file? I have a four table and four csv file i mean data file for that. I am running concurrent program to load the data from csv file to custom table. based on my input data file name, it has to take automatically from one control file.
Can anyone share with me how can i acheive this?
Thanks

Hi,
Can't we acehive like below. I don't this exactly corrcect.
OPTIONS (SKIP=1)
LOAD DATA
INFILE << file name 1 >>
APPEND INTO TABLE XXCZ_VA_SAMPLE1
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
PARENT_ITEM "TRIM(BOTH FROM :PARENT_ITEM)"
LOAD DATA
INFILE << file name 2 >>
APPEND INTO TABLE XXCZ_VA_SAMPLE2
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
ITEM_NUMBER "TRIM(BOTH FROM :ITEM_NUMBER)"
)Edited by: orasuriya on Sep 14, 2009 3:03 AM

Similar Messages

How To Use Multiple Currencies in single payroll ........

Dear All
Can you help me How To Use Multiple Currencies in single payroll?
with regards
User600722

I am not a functional expert. but ML Note 150173.1 (which is quite old) states that this is not possible.
Srini

How to use multiple tables in developing one Graph in Endeca Integrator

We have the requirement where we want to show the matrix for a particular entity which is coming from two separate table, there is a join which is possible on both the tables to get the correct data. But we are not able to find how to use data from two tables. We can create the SQL query with all the joining conditions but there are many tables which are involved so performance of query will be a problem. Is there any way in Endeca where I can create two data sources using two separate queries and while showing the matrix , I can join both the tables to get the matrix .

You have not mentioned the version of Endeca that is used for your application. Joins are recently introduced in version 2.3 and could be used for avoiding complex DEFINE analytical statements. For this to work, the data should be present in the same dgraph and a single data source in Studio should point to data from both sources.
These may not yet be the type of SQL joins that you may expect them to be as performing complex joins is also costly in Endeca. Hope you are not expecting to join huge data sets.
The best possible solution I could think for addressing this problem is to load denormalized data (at least for now) into Endeca and do aggregations in queries. We can denormalize data in multiple ways even using ETL tools not just SQL queries as the above comment states.

How to use multiple tables in DRIVING_SITE

Hi All,
I see very bad performance with my query having dblinks to remote database.
How can I use DRIVING_SITE for multiple remote tables here?
Does it it useful to use on DRIVING_SITE multiple tables?
What is impact of using ORDER BY on local table column ( table A in below case) in the query?
SELECT A.col1, B.col2 , C.col3
FROM A, B@dblink1, C@dblink1, D@dblink2
WHERE <few join conditions>
ORDER BY A.col1 ;
Join conditions in above query is taken care to have better performance. But from our analysis it is understood that poor performance is due to DB Links to remoate database. What is best approach to get good performance with DB Links?
Regards,
Ram

http://download.oracle.com/docs/cd/E11882_01/server.112/e17120/ds_appdev004.htm#ADMIN12196
Will give you an idea of where to start.

How to use multiple projects in single application :)

Hai ,
I ve to use single .portal for accessing multiple projects in a application. if i create two new projects in a application i cant able to use .portlet file of one project to display in another .portal . is there any way to display both the project .portlet files in a single portal. :)

not really.. sorry
Kunal Mittal

Export multiple tables into one flat file

I have data in multiple tables on a processing database that I need to move up to a production database. I want to export the data into a flat file, ftp it to the production server and have another job pick up the file and process it. I am looking for
design suggestions on how to get multiple tables into one flat file using SSIS?
Thank You.

Hey,
Without a bit more detail, as per Russels response, its difficult to give an exact recommendation.
Essentially, you would first add a data flow task to your control flow. Create a source per table, then direct the output of each into an union all task. The output from the union all task would then be directed to a flat file destination.
Within the union all task you can map the various input columns into the appropriate outputs.
If the sources are different, it would probably be easiest to add a derived column task in-between the source and the union all, adding columns as appropriate and setting a default value that can be easily identified later (again depending on your requirements).
Hope that helps,
Jamie

How to uploade multiple flatfiles for single transaction using BDC?

How to uploade multiple flatfiles for single transaction using BDC?

Hi,
You need to upload all data files into an internal table first either using OPEN DATASET (application server files) or GUI_UPLOAD (PC files).
Then loop at the internal table and call BDC transaction to process the data.
Regards,
Ferry Lianto

How to add multiple table when creating add on using b1de

Hi all,
Plz help me
How to add multiple table when creating add on using b1de.
Thanks

Hi dns_sap,
Can you explain a little better what you are trying to accomplish? Is it to create UserTables and UserFields in the database, when the addon runs the first time?
If so, you can use the following code
Add User Table
        Try
            Dim lRetCode As Long
            Dim oUDT As SAPbobsCOM.UserTablesMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
            oUDT.TableName = TableName
            oUDT.TableDescription = TableDescription
            oUDT.TableType = TableType
            lRetCode = oUDT.Add
            '// Check for error when adding the Table: if lRetCode = 0 the table was created; if lRetCode = -2035 the table already exisits
            If lRetCode <> 0 Then
                oApplication.MessageBox("Error: " & lRetCode.ToString & ", " & oCompany.GetLastErrorDescription)
            End If
        Catch ex As Exception
            oApplication.MessageBox(oCompany.GetLastErrorDescription)
        Finally
            System.Runtime.InteropServices.Marshal.ReleaseComObject(oUDT)
            oUDT = Nothing
            lRetCode = Nothing
            GC.Collect()
        End Try
Add User Field
Try
            Dim lRetCode As Long
            Dim oUDF As SAPbobsCOM.UserFieldsMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
            oUDF.TableName = TableName
            oUDF.Name = FieldName
            oUDF.Description = FieldDescription
            oUDF.Type = FieldType
            lRetCode = oUDF.Add
            '// Check for error when adding the field: if lRetCode = 0 the field was created; if lRetCode = -2035, the field already exists
            If lRetCode <> 0 Then
                oApplication.MessageBox("Error: " & oCompany.GetLastErrorCode & ", " & oCompany.GetLastErrorDescription)
            End If
        Catch ex As Exception
            oApplication.MessageBox(oCompany.GetLastErrorDescription)
        Finally
            System.Runtime.InteropServices.Marshal.ReleaseComObject(oUDF)
            oUDF = Nothing
            lRetCode = Nothing
            GC.Collect()
        End Try
Regards,
Vítor Vieira

How to display multiple tables from database using netbeans swing gui

plz reply asap on how to display multiple tables from database using netbeans swing gui into the same project

Layered Pane with JTables or you can easily to it with a little scripting and HTML.
plzzzzzzzzzzzzzzzzz, do not use SMS speak when posting.

How to use multiple tape drive for single filesystem on single client.

Hello All.
I want to backup single filesystem with multiple tape drive.
Incase of Symantec veritas netbackup "NEW_STREAM" for multi-stream backup.
Backup client has a single backup filesystem like /data1 directory with 4 LTO6 drives.
/data1 directory doesn't have a sub-direcotry, just present a files.
If /data1 directory has a sub-directory like /data1/aaa, /data1/bbb, /data1/ccc , Is it possible to use multiple drives?
Please anybody answer the questions.
Thanks advanced.

See how to use multiple tape drive from single client when I want to backup single filesystem?

How to send multiple attachements in single mail

Hi All,
Currently i am using this function module SO_NEW_DOCUMENT_ATT_SEND_API1 to send mail with only one attachment.
But now i need to send multiple attachments to a single mail.
Can any one please tell me as how to send multiple attachments in single mail.
Thanks in advance.

Hi
See this and do accordingly
Mailing with Attachment by ABAP Coding
Refer this link:
Mail with attachment.
FORM send_list_to_basis .
DATA: w_path      LIKE rlgrap OCCURS 0 WITH HEADER LINE,
        lt_index    TYPE sy-tabix,
        doc_type(3) TYPE c,
        descr       LIKE it_objpack_basis-obj_descr,
        temp_data   LIKE w_path,
        temp1       TYPE string,
        tab_lines   TYPE i,
        langu(15)   TYPE c,
        expirydate TYPE so_obj_edt,
        L_FILE1(100).
CONCATENATE 'C:\' sy-repid '_' sy-datum '.XLS' INTO L_FILE1.
W_PATH-FILENAME = L_FILE1.
APPEND w_path.
CLEAR w_path.
wa_doc_chng-obj_descr = 'User List not logged on for 180 days'.
wa_doc_chng-obj_langu = 'E'.
wa_doc_chng-obj_expdat = sy-datum.
CLEAR w_subject.
CONCATENATE 'Please find attached document with list of users'
              'not logged on for 180 days for client' sy-mandt
              INTO w_subject SEPARATED BY space.
it_objtxt_basis-line = w_subject.
APPEND it_objtxt_basis.
CLEAR it_objtxt_basis.
it_objtxt_basis-line = text-004.
APPEND it_objtxt_basis.
CLEAR it_objtxt_basis.
CLEAR w_tab_line.
DESCRIBE TABLE it_objtxt_basis LINES w_tab_line.
READ TABLE it_objtxt_basis INDEX w_tab_line INTO l_cline.
wa_doc_chng-doc_size =
   ( w_tab_line - 1 ) * 255 + STRLEN( l_cline ).
CLEAR it_objpack_basis-transf_bin.
it_objpack_basis-head_start = 1.
it_objpack_basis-head_num   = 0.
it_objpack_basis-body_start = 1.
it_objpack_basis-body_num   = w_tab_line.
it_objpack_basis-doc_type   = 'RAW'.
APPEND it_objpack_basis.
CLEAR it_objpack_basis.
LOOP AT w_path.
    temp1 = w_path.
    descr = w_path.
    CALL FUNCTION 'STRING_REVERSE'
      EXPORTING
        string = descr
        lang    = 'E'
      IMPORTING
        rstring = descr.
    CALL FUNCTION 'STRING_SPLIT'
      EXPORTING
        delimiter = '\'
        string    = descr
      IMPORTING
        head      = descr
        tail      = temp_data.
    CALL FUNCTION 'STRING_REVERSE'
      EXPORTING
        string = descr
        lang    = 'E'
      IMPORTING
        rstring = descr.
    CALL FUNCTION 'STRING_SPLIT'
      EXPORTING
        delimiter = '.'
        string    = descr
      IMPORTING
        head      = temp_data
        tail      = doc_type.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename      = temp1
        filetype      = 'BIN'
        header_length = 0
        read_by_line = 'X'
        replacement   = '#'
      TABLES
        data_tab      = it_upload.
    DESCRIBE TABLE it_upload LINES tab_lines.
    DESCRIBE TABLE it_objbin_basis LINES lt_index.
    lt_index = lt_index + 1.
    LOOP AT it_upload.
      wa_objbin_basis-line = it_upload-line.
      APPEND wa_objbin_basis TO it_objbin_basis.
      CLEAR wa_objbin_basis.
    ENDLOOP.
    it_objpack_basis-transf_bin = 'X'.
    it_objpack_basis-head_start = 0.
    it_objpack_basis-head_num   = 0.
    it_objpack_basis-body_start = lt_index.
    it_objpack_basis-body_num   = tab_lines.
    it_objpack_basis-doc_type   = doc_type.
    it_objpack_basis-obj_descr = descr.
    it_objpack_basis-doc_size   = tab_lines * 255.
    APPEND it_objpack_basis.
    CLEAR it_objpack_basis.
ENDLOOP.
it_reclist_basis-receiver = '[email protected]'.
it_reclist_basis-rec_type = 'U'.
APPEND it_reclist_basis.
CLEAR it_reclist_basis.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = wa_doc_chng
      put_in_outbox              = 'X'
      commit_work                = 'X'
    TABLES
      packing_list               = it_objpack_basis
      contents_txt               = it_objtxt_basis
      contents_bin               = it_objbin_basis
      receivers                  = it_reclist_basis
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      operation_no_authorization = 4
      OTHERS                     = 99.
IF sy-subrc EQ 0.
    SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
ENDIF.
ENDFORM.                    " send_list_to_basis
<b>Reward points for useful Answers</b>
Regards
Anji

How to use multiple JREs (1.5.0_20 and 1.6.0_07) with Internet Explorer 8?

Hi!
Question about the problem mentioned in subject.
I have configured that JNLP opens with 1.5 version, both versions are enabled in Java Control Panel Runtime Settings but when I try to start a desktop java console says:
Java Web Start 1.5.0_22
Using JRE version 1.6.0_07 Java HotSpot(TM) Client VM
And the opening of the desktop creates an exception:
Java Web Start - Invalid Argument Error
TooManyArgumentsException[ Too many arguments supplied: {C:\WINDOWS\Temporary, Internet, Files\Content.IE5\....
I'm trying to open my desktop with 1.5 version and other programs with 1.6 version. What is it that I still need to do? I'm kind of confused with this. Some of my collagues have succeeded with this and some doesn't, with the same configuration.
So the question is, how to use multiple JREs with IE8 so that one application uses 1.5 version and others 1.6 version?
Br,
Katri
Edited by: ka**** on 09-Mar-2011 01:16
Edited by: ka**** on 09-Mar-2011 03:16

ka**** wrote:
..Question about the problem mentioned in subject.No "Using multiple JREs (1.5.0_20 and 1.6.0_07) with Internet Explorer 8" is a statement. To transform it to a question would be something like "How to use multiple JREs (1.5.0_20 and 1.6.0_07) with Internet Explorer 8?".
Once you can come up with an actual question, I might look at this more closely.

How to use multiple selection parameters in the data model

Hi, after have looked all the previous threads about how to use multiple selection parameters , I still have a problem;
I'm using Oracle BI Publisher 10.1.3.3.2 and I'm tried to define more than one multiple selection parameters inside the data template;
Inside a simple SQL queries they work perfectly....but inside the data template I have errors.
My data template is the following (it's very simple...I am just testing how the parameters work):
<dataTemplate name="Test" defaultPackage="bip_departments_2_parameters">
<parameters>
<parameter name="p_dep_2_param" include_in_output="false" datatype="character"/>
<parameter name="p_loc_1_param" include_in_output="false" datatype="character"/>
</parameters>
<dataTrigger name="beforeReport" source="bip_departments_2_parameters.beforeReportTrigger"/>
<dataQuery>
<sqlStatement name="Q2">
<![CDATA[
select deptno, dname,loc
from dept
&p_where_clause
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_DEPT" source="Q2">
<element name="deptno" value="deptno"/>
<element name="dname" value="dname"/>
<element name="loc" value="loc"/>
</group>
</dataStructure>
</dataTemplate>
The 2 parameters are based on these LOV:
1) select distinct dname from dept (p_dep_2_param)
2) select distinct loc from dept (p_loc_1_param)
and both of them have checked the "Multiple selection" and "Can select all" boxes
The package I created, in order to use the lexical refence is:
CREATE OR REPLACE package SCOTT.bip_departments_2_parameters
as
p_dep_2_param varchar2(14);
p_loc_1_param varchar2(20);
p_where_clause varchar2(100);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
CREATE OR REPLACE package body SCOTT.bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
if (p_dep_2_param is not null) --and (p_loc_1_param is not null)
then
p_where_clause := 'where (dname in (' || replace (p_dep_1_param, '''') || ') and loc in (' || replace (p_loc_1_param, '''') || '))';
else
p_where_clause := 'where 1=1';
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
As you see, I tried to have only one p_where_clause (with more than one parameter inside)....but it doesn't work...
Using only the first parameter (based on deptno (which is number), the p_where_clause is: p_where_clause := 'where (deptno in (' || replace (p_dep_2_param, '''') || '))';
it works perfectly....
Now I don't know if the problem is the datatype, but I noticed that with a single parameter (deptno is number), the lexical refence (inside the data template) works.....with a varchar parameter it doesn't work....
So my questions are these:
1) how can I define the p_where_clause (inside the package) with a single varchar parameter (for example, the department location name)
2) how can I define the p_where_clause using more than one parameter (for example, the department location name and the department name) not number.
Thanks in advance for any suggestion
Alex

Alex,
the missing thing in your example is the fact, that if only one value is selected, the parameter has exact this value like BOSTON. If you choose more than one value, the parameter includes the *'*, so that it looks like *'BOSTON','NEW YORK'*. So you need to check in the package, if there's a *,* in the parameter or not. If yes there's more than one value, if not it's only one value or it's null.
So change your package to (you need to expand your variables)
create or replace package bip_departments_2_parameters
as
p_dep_2_param varchar2(1000);
p_loc_1_param varchar2(1000);
p_where_clause varchar2(1000);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
create or replace package body bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
p_where_clause := ' ';
if p_dep_2_param is not null then
if instr(p_dep_2_param,',')>0 then
p_where_clause := 'WHERE DNAME in ('||p_dep_2_param||')';
else
p_where_clause := 'WHERE DNAME = '''||p_dep_2_param||'''';
end if;
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || ' AND LOC IN ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || ' AND LOC = '''||p_loc_1_param||'''';
end if;
end if;
else
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || 'WHERE LOC in ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || 'WHERE LOC = '''||p_loc_1_param||'''';
end if;
end if;
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
I've written a similar example at http://www.oracle.com/global/de/community/bip/tipps/Dynamische_Queries/index.html ... but it's in german.
Regards
Rainer

How to handle multiple tables data in Entity Beans?

How to handle multiple tables data in Entity Beans?
i mean, my bean (non trivial) is responsible for frequent
insertion in one table and some deletion on another table.
Can anyone of you...please..?

Is your data model right? If you are adding in one and deleting in another it sounds to me more like a process that an entity, in which case you may revisit your data model and simplify it, add in a session bean with the process method to co-ordinate between the two.
However, if you want to map multiple different tables within a single entity bean it is possible and just part of the mapping. How you actualyl specify it depends on which implementation you are working with.
Cheers,
Peter.

Writeback using Multiple tables

Hello Everyone,
1. Can we create a report with writeback capabilities using Multiple tables (Say one fact and several dimensions)?.
Whatever examples I'm seeing in blogs or forums with screesnshots , explains writeback Reports created with just one table.
2. If writeback can work with reports using multiple tables, how do we need to change the XML scripts in custom message folder(insert and update)?
any example ?
Your suggestions are appreciated.
Thanks

You can only send one statement. Then if you want update many tables, you have to use a procedure/function in your SQL statement. For instance with a table function:
http://gerardnico.com/wiki/database/oracle/table_function
But I will advice you to do it with the simplest way possible: then one answer for one table to update.
Success
Nico

How to use multiple table in single control file?

Similar Messages

Maybe you are looking for