How to Provide the Certificate Generation key while configuring WorkFlow Manager 1.0

Hi,
I am new to Workflow manager.I am configuring it in a SharePoint Farm with Allow Workflow Management over Http on this computer option.
Its asking for Certificate Generation key for joining to the Farm.
Could anyone help me how to get the Certificate Generation key.
Please advice
Thanks, Vijay Arul Lourdu

we forgot the auto-generated Certificate
Generation Key. Can you tell us the detail instructions to find it? Thanks.

Similar Messages

Facing some problem while configuring Workflow Manager 1.0.

Hi,
I am facing some problem while configuring Workflow Manager 1.0. in my farm.
Scenario is,
I have installed and configured workflow manager in my farm, it was working well with no issue. But one of team member played with AD and deleted Farm administrator's entry from AD by mistake. So suddenly workflows get affected and stopped working.
Then I added administrator entry in AD, uninstalled the Workflow Manager and installed it again. But now while configuring workflow manager I am facing some issues that "Failure to adding user in BUILTIN\Administrative group. Please add it manually"
And after sometime it shows another error message that, "Starting service Service Bus Massage broken failed: Timed out has expired, the operation has not been completed"
If I go for services then "Service bus Message broker" service is not running properly (Its status is just showing "Starting") and don't starts.
I have also added the user in BUILTIN\Administrator, IIS_IUSER, WSS_WPG group of the machine from computer manager - user and groups.
Also given permission to databases, and assign role of sysadmin and dbcreator to user
I also tried following steps
1) Stop all services associated to workflows
2) Uninstalled workflow manager
3) Deleted all databases associated with workflows
4) Installed workflow manager and tried to configure.
But showing same error.
If I use another SharePoint server farm to configure workflows, there I am not getting first error of adding user to BUILTIN\Administrator group. but second error remains same.
We having SQL server and Active directory at another machine and FARM at another machine, if I use local admin for configuration of the workflows (as local admin can start any services) but entry of local admin is not Active directory so can not assign SQL's
sysadmin, and dbcreator role to local admin.
I am attaching snapshot of error for better understanding.
Your help will be very precious to me.
Thanks,
Rajesh
Rajesh Agravat

Rajesh
Check to see what the service accounts are being used for these Workflow Manager 1.0 services:
Service Bus Message Broker
Service Bus Gateway
Workflow Manager Backend
All of these should be running and your workflow service account should be running all of these. If any are still configured under the old service account, they'll need to be updated. Next, check to see what service accounts have access to the
Workflow Manager 1.0 databases:
SbGatewayDatabase
SbManagement
SbMessageContainer
WFInstanceManagement
WFManagement
WFResourceManagement
The Workflow Manager service account should be mapped as the DBO for all of these. if any are still configured under the old service account, they'll need to be updated.
Given the complete loss of the original workflow service account, and the resultant impact on security configuration throughout the workflow farm, I would recommend performing a re-installation. Do it thus:
Launch Workflow Manager Configuration Wizard
Select the Leave Workflow Manager Farm
Stop all workflow services (see above list)
Repeat steps 1-3 for each instance of Workflow Manager 1.0 Server installed.
Delete all Workflow Manager databases (see above list).
reboot.
Start new installation.

Unable to find the User Named Account Name@Domain Name while Configuring Workflow Manager

Hi,
I have installed Work Flow Manager,Service Bus and its Cumulative Updates.
While Configuring Workflow Manger using Workflow Manager configuration wizard i am getting the error while creating a Service Bus Namespace.
I have provided the Service Accounts for both Workflow Manager and Service Bus as Domain\Account instead of
Account@Domain.
While looking in to the Power Shell scripts that are poupulated by the GUI i have identified that
Account@Domain is appended to the ManageUsers switch while creating a Service Bus Namespace and the GUI configuration is failing.
    New-SBNamespace -Name 'WorkflowDefaultNamespace' -AddressingScheme 'Path' -ManageUsers 'Domain\Account','Account@Domain' -Verbose;
So i need to modify the Powershell script as below and need to run the Powershell scripts for configuring Workflow Manager.
Is this a bug in GUI Workflow Configuration Wizard or am i doing something wrong.
Please help.
    New-SBNamespace -Name 'WorkflowDefaultNamespace' -AddressingScheme 'Path' -ManageUsers 'Domain\Account' -Verbose;
Scripts Populated from GUI modified for Making it working:
# To be run in Workflow Manager PowerShell console that has both Workflow Manager and Service Bus installed.
# Create new SB Farm
$SBCertificateAutoGenerationKey = ConvertTo-SecureString -AsPlainText -Force -String 'Run As Password' -Verbose;
New-SBFarm -SBFarmDBConnectionString 'Data Source=Server Name;Initial Catalog=SbManagementDB;Integrated Security=True;Encrypt=False' -InternalPortRangeStart 9000 -TcpPort 9354 -MessageBrokerPort 9356 -RunAsAccount 'Domain\Account' -AdminGroup 'Domain\Domain
Group' -GatewayDBConnectionString 'Data Source=Server Name;Initial Catalog=SbGatewayDatabase;Integrated Security=True;Encrypt=False' -CertificateAutoGenerationKey $SBCertificateAutoGenerationKey -MessageContainerDBConnectionString 'Data Source=Server Name;Initial
Catalog=SBMessageContainer01;Integrated Security=True;Encrypt=False' -Verbose;
# To be run in Workflow Manager PowerShell console that has both Workflow Manager and Service Bus installed.
# Create new WF Farm
$WFCertAutoGenerationKey = ConvertTo-SecureString -AsPlainText -Force -String 'Run As Password' -Verbose;
New-WFFarm -WFFarmDBConnectionString 'Data Source=Server Name;Initial Catalog=WFManagementDB;Integrated Security=True;Encrypt=False' -RunAsAccount 'Domain\Account' -AdminGroup 'Domain\Domain Group' -HttpsPort 12290 -HttpPort 12291 -InstanceDBConnectionString
'Data Source=Server Name;Initial Catalog=WFInstanceManagementDB;Integrated Security=True;Encrypt=False' -ResourceDBConnectionString 'Data Source=Server Name;Initial Catalog=WFResourceManagementDB;Integrated Security=True;Encrypt=False' -CertificateAutoGenerationKey
$WFCertAutoGenerationKey -Verbose;
# Add SB Host
$SBRunAsPassword = ConvertTo-SecureString -AsPlainText -Force -String 'Run As Password' -Verbose;
Add-SBHost -SBFarmDBConnectionString 'Data Source=Server Name;Initial Catalog=SbManagementDB;Integrated Security=True;Encrypt=False' -RunAsPassword $SBRunAsPassword -EnableFirewallRules $true -CertificateAutoGenerationKey $SBCertificateAutoGenerationKey -Verbose;
Try
    # Create new SB Namespace
    New-SBNamespace -Name 'WorkflowDefaultNamespace' -AddressingScheme 'Path' -ManageUsers 'Domain\Account' -Verbose;
    Start-Sleep -s 90
Catch [system.InvalidOperationException]
# Get SB Client Configuration
$SBClientConfiguration = Get-SBClientConfiguration -Namespaces 'WorkflowDefaultNamespace' -Verbose;
# Add WF Host
$WFRunAsPassword = ConvertTo-SecureString -AsPlainText -Force -String 'Run As Password' -Verbose;
Add-WFHost -WFFarmDBConnectionString 'Data Source=Server Name;Initial Catalog=WFManagementDB;Integrated Security=True;Encrypt=False' -RunAsPassword $WFRunAsPassword -EnableFirewallRules $true -SBClientConfiguration $SBClientConfiguration -EnableHttpPort
-CertificateAutoGenerationKey $WFCertAutoGenerationKey -Verbose;
Thanks, Vijay Arockiasamy

Hi Vijay
uninstall this and install the one labeled Refresh 1
Kind Regards,
John Naguib
Senior Consultant
John Naguib Blog
John Naguib Twitter
Please remember to mark this as answered if it helped you

Timeout while configuring workflow manager (service bus services are stuck on strarting)

Hello,
I cant finish workflow manager configuration. help me please.
I tried:
1) leave the farm (Workflow manager configuration), delete databases, create new farm with default settings - it creates SB&WF farms and on 3d stage I get timeout error.
2) leave the farm, delete databases, delete workflow manager and service bus software, install it again, create new farm with defaults - the same result.
3) leave the farm, delete databases, get powershell commands for "create new farm with default settings", run it step by step - same result.
there are generated powershell commands:
New-SBFarm -SBFarmDBConnectionString '... ManagementDB con string ...' -InternalPortRangeStart 9000 -TcpPort 9354 -MessageBrokerPort 9356 -RunAsAccount 'domain\acc' -AdminGroup 'BUILTIN\Administrators' -GatewayDBConnectionString '... gateway con string
...' -CertificateAutoGenerationKey $SBCertificateAutoGenerationKey -MessageContainerDBConnectionString '... message container con string ...' -Verbose;
New-WFFarm -WFFarmDBConnectionString '... WF managementDB con string ...' -RunAsAccount 'domain\acc' -AdminGroup 'BUILTIN\Administrators' -HttpsPort 12290 -HttpPort 12291 -InstanceDBConnectionString '... WF instanceDB con string ...' -ResourceDBConnectionString
'... wf resourceDB con string ...' -CertificateAutoGenerationKey $WFCertAutoGenerationKey -Verbose;
Add-SBHost -SBFarmDBConnectionString '... ManagementDB con string ...' -RunAsPassword $SBRunAsPassword -EnableFirewallRules $true -CertificateAutoGenerationKey $SBCertificateAutoGenerationKey -Verbose;
I don't see any errors in event log, only timeout error in setup log.
Service bus gateway service is started successfully, Service bus message broker is stuck starting.

dmadelung, thank you for your message.
the problem was with ports. 9000 port was used already. moving to different ports resolved the problem

How to get the process instance key so as to retry a rejected task through api while ad provisoing?

Hi All,
How to get the process instance key so as to retry a rejected task through API while AD provisioing state?
API URL - http://docs.oracle.com/cd/E27559_01/apirefs.1112/e28159/toc.htm
Thanks

To retry a task that is in a rejected state, you use the SCH_KEY which is the task key. In OIM, all rejected tasks are listed in the OTI table. It contains all the important information about a rejected or pending task.
You can use the APIs found in the tcProvisioningOperationsIntf class to retrieve open tasks.
-Kevin

How to provide the license key after having the evaluation copy expired for SQL Server 2012 Standard?

How to provide the license key after having evaluation copy expired for SQL Server 2012 Standard?
I couldn’t figure out how to provide the license key after having
evaluation copy expired for SQL Server 2012 Standard
Thank you
Best
Jamal

The following blog is on the topic: Upgrading from SQL Server 2012 Evaluation Edition
Kalman Toth Database & OLAP Architect
Free T-SQL Scripts
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

How long is the iPad battery last while watching video on YouTube with 3G?

How long is the iPad2 battery last while watching video on YouTube with 3G?

My iPad 2 battery can use only ~7 hours 15mins when surfing the web using cellular data network. Is it normal?
I would say that's normal. Cellular uses more power than wifi. Your screen brightness is also a factor. Lower the screen brightness & battery will last longer.
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
 Cheers, Tom

Workflow manager .. certificate generation key or cert

Hello. Thanks for the time. I was wondering if I can get some enlightment on the SP 2013 workflow manager configuration. In the technet video series one of the steps is to create a certificate and use that... but in most install docs
I've found the step is skipped and set to choose an auto generate a cert with a key... like the farm passphrase. My question is really in regards to what is the difference and can we have that set for in production? or is the auto-generate only for dev
and testing?

Hi,
Quote:
Under some circumstances, you must obtain and install Workflow Manager "issuer" certificates on SharePoint Server 2013. Here are the circumstances where you must install Workflow Manager certificates:
If SSL is enabled either on SharePoint Server 2013 (which is not the default) or on Workflow Manager (which is the default), AND
If SharePoint Server 2013 and Workflow Manager do not share a Certificate Authority, AND
If Workflow Manager is configured to generate self-signed certificates (which is the default).
For more information: http://technet.microsoft.com/en-us/library/jj658589(v=office.15).aspx
Here is an article about certificates in workflow manager for reference:
http://www.harbar.net/articles/wfm3.aspx
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

How to view the certificate that a component has been signed with?

Hi all,
Been using java webstart deployment for a while so understand how to sign and deploy java applications.
Question I have is how to view the certificate that was used to Sign a jar. For example, if I signed a jar "myComponent.jar" how can I then view the certificate details within this jar. I currently have an old component which I signed with an old certificate and want to view the experation details.
Thanks in advance
Simon
Edited by: simon_seagroatt on Sep 22, 2009 4:20 AM

You can use command (it will show CN, OU, O, L, etc... and expiration date, of course):
jarsigner -certs -verify -verbose pathToYourJar.jarI'd suggest redirecting output (>>out.txt).
Bye.

How to get the last error for while loop?

How to get the last error for while loop? I just want transfer the last error for while loop, but the program use the shift register shift all error every cycle.

What do you mean by "get" and "transfer"?
If the shift register is not what you want, use a plan tunnel instead.
Typically, programmers are interested in the first, not last, error.
Can you show us your code so we have a better idea what you are trying to?
LabVIEW Champion . Do more with less code and in less time .

How to disable the select options button, while audio is playing in the question template in captivate 8?

How to disable the select options button, while audio is playing in the question template in captivate 8?

Apologies for late reply.
I mean "On Question screens audio keeps on playing even after we have selected an option or options depending on the question type and clicked Submit. How do we stop the audio on selecting an option?"

I have a new mac and want my old photoshop on it , how get i the old serial key for the new ?

I have a new mac and want my old photoshop on it , how get i the old serial key for the new ? My old mac is deleted ...

We would need to know the version of Mac OS you are running and the version of Photoshop you want to install.
The serial number is the tricky part. If you have no idea where you placed it and did not register your product with Adobe, your chances are very low of retrieving it.

How to replace the certificate of Cisco 2106 wireless LAN controller for CAPWAP ?

I have interested in CAPWAP feature and I download the open capwap project to make Access Controller (AC) and Wireless Terminal Point (WTP). I had built the AC which used PC and WTP which used Atheros AP. The CAPWAP feature work well when I enabled the CAPWAP that used my own AC and WTP. When I got the Cisco 2106 wireless LAN controller (Cisco WLC), I configured the Cisco WLC to instead my own AC but I got the authorize fail in Cisco WLC side. It seem the Cisco WLC could not recognize the CAPWAP message which sent form my own WTP. I think this issue just need to synchronize the certificate between Cisco WLC and WTP.So I need to replace the Cisco WLC's certificate manually. Does anyone know how to replace the certificate manually with Cisco WLC ?
Best Regards,
Alan

Unfortunately this Support Community is for Cisco Small Business & Small Business Pro product offerings. The WLC2106 is a traditional Cisco product. You can find this type of support on the Cisco NetPro Forum for all traditional Cisco products.
Best Regards,
Glenn

How to set the short cut key for buttons

Hi
I dont know how to set the short cut keys for the button...can u pls help me out

Do you mean a short cut key for buttons at client side (web browser)? If yes, you could do it with JavaScript~~~ ^o^

HT201178 when using apple bluetooth keyboard with iPad, hitting the enter/return key while typing in iMessage only adds another line not 'send' the message? is there a setting to change that somewhere?

when using apple bluetooth keyboard with iPad, hitting the enter/return key while typing in iMessage only adds another line not 'send' the message? is there a setting to change that somewhere?

Everywhere that I've checked it is not possible to do this. I would like to even do this using the vkb. I hate having to stretch my thumb all the way up just to send a message. It's messaging, not a report or email. Seems backwards. Hopefully some day Apple can add this option.

How to Provide the Certificate Generation key while configuring WorkFlow Manager 1.0

Similar Messages

Maybe you are looking for