How to query the apex base tables .

Hi,
I need to apex tables from whic w can query the following.
a. workspace information , workspace id's
b. application information , application id's and schemas to which the application is linked to
c. application users
Thanks in advance.
Regards
Nikhil

Nikhil,
apex_workspaces, apex_applications and apex_workspace_apex_users views will give you the required information.
also apex_dictionary view will give you list of all available apex views.
Thanks,
Manish

Similar Messages

How to update the data base table with data

i have two ztables, one is zfm_kfz and other one is zfm_kmvrg
zfm_kfz is maintained by using table maintenance generator as well as alv grid control for list display.
zfm_kfz the field r like this KFZR, GERAET, KOSTENTRAEGER, BEZEICHNUNG, TUVDATUMMMYYYY, ASUDATUMMMYYYY, KMSTAND, HISTO AND REIFEN.
PROBLEM: all the data in grid control r updated except KMSTAND
fields in zfm_kmvrg are kostentraeger, kfznr and kmstand i m creating table control for this screen here what ever enter the last km stand is updated in the list.for one kfznr many kostentraegers and kmstand, the last km stand is updated here , go through this code plz hepl me
CONTROLS tabctrl TYPE TABLEVIEW USING SCREEN 100.
DATA: cols LIKE LINE OF tabctrl-cols,
      lines TYPE i.
DATA: ok_code TYPE sy-ucomm,
      save_ok TYPE sy-ucomm.
DATA: itab TYPE TABLE OF zfm_kmvrg,
      fs_itab LIKE LINE OF itab,
      fl_change TYPE c,
      fl_error TYPE c.
*TABLES fs_itab.
LOOP AT tabctrl-cols INTO cols.
cols-screen-input = '0'.
MODIFY tabctrl-cols FROM cols INDEX sy-tabix.
ENDLOOP.
*SELECT * FROM spfli INTO TABLE itab.
CALL SCREEN 100.
MODULE status_0100 OUTPUT
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_101'.
DESCRIBE TABLE itab LINES lines.
tabctrl-lines = lines.
ENDMODULE.                    "status_0100 OUTPUT
MODULE cancel INPUT
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.                    "cancel INPUT
MODULE read_table_control INPUT
MODULE read_table_control INPUT.
MODIFY itab FROM fs_itab INDEX tabctrl-current_line.
ENDMODULE.                    "read_table_control INPUT
MODULE user_command_0100 INPUT
MODULE user_command_0100 INPUT.
DATA:
    lw_index TYPE i.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
    WHEN 'ADD'.
      LOOP AT tabctrl-cols INTO cols.
        cols-screen-input = '1'.
        MODIFY tabctrl-cols FROM cols INDEX sy-tabix.
      ENDLOOP.
      CLEAR fs_itab.
      APPEND fs_itab TO itab.
    WHEN 'SAVE'.
      IF NOT itab[] IS INITIAL.
        LOOP AT itab[] into FS_ITAB.
          lw_index = sy-tabix.
          IF NOT fs_itab IS INITIAL.
            MODIFY ZFM_KMVRG FROM fs_itab.
            IF sy-subrc EQ 0.
              UPDATE ZFM_KFZ set kmstand = fs_itab-kmstand
                                    WHERE kfznr = fs_itab-kfznr.
            ELSE.
              fl_error = 'X'.
              WRITE:/ 'The record number', lw_index,
                      'has not been updated'.
            ENDIF.
          ENDIF.
        ENDLOOP.
      ELSE.
        MESSAGE s000(0) WITH 'No data is present to update'.
      ENDIF.
ENDCASE.
IF fl_error = 'X'.
    LEAVE TO LIST-PROCESSING.
ELSE.
    MESSAGE s000(0) WITH
          'All the records have been updated successfully'.
ENDIF.
ENDMODULE.                    "user_command_0100 INPUT
IN SE51
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT ITAB INTO fs_itab WITH CONTROL tabctrl.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
LOOP AT ITAB.
    module read_table_control.
ENDLOOP.
module user_command_0100.
i m trying many times i m not getting proper output, plz help me on this

Hi,
I am hereby givng the similar sample code.Check this with your requirement.
In the flow logic of the screen 9000, write the following code.
PROCESS BEFORE OUTPUT.
MODULE set_status.
MODULE get_t_ctrl_lines.
LOOP AT i_makt WITH CONTROL t_ctrl CURSOR t_ctrl-current_line.
* Dynamic screen modifications
    MODULE set_screen_fields.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT i_makt.
    FIELD i_makt-pick MODULE check.
    FIELD i_makt-zmatnr MODULE zmatnr .
ENDLOOP.
MODULE user_command_9000.
In the program, write the following code.
PROGRAM SAPMZTC MESSAGE-ID zz.
* Tables Declaration
TABLES: zzz_makt.
* Internal table Declaration
DATA : i_makt TYPE STANDARD TABLE OF zzz_makt WITH HEADER LINE.
* Table control Declaration
CONTROLS: t_ctrl TYPE TABLEVIEW USING SCREEN '9000'.
* Variable Declaration
DATA : flg,           "Flag to set the change mode
       ln TYPE i.     "No. of records
*&      Module get_T_CTRL_lines OUTPUT
* Populating data
MODULE get_t_ctrl_lines OUTPUT.
SELECT zmatnr zmaktx
         INTO CORRESPONDING FIELDS OF TABLE i_makt
         FROM zzz_makt.
DESCRIBE TABLE i_makt LINES ln.
* To make the vertical scroll bar to come on runtime
t_ctrl-lines = ln + 100.
ENDMODULE.                 " get_T_CTRL_lines OUTPUT
*&      Module USER_COMMAND_9000 INPUT
* Triggering event according to the user command
MODULE user_command_9000 INPUT.
DATA :lv_fcode LIKE sy-ucomm,    "Function Code
        lv_answer(1) type c.       "Storing the answer
lv_fcode = sy-ucomm.
CASE lv_fcode.
    WHEN 'CHANGE'.
* Setting the flag to make the table control in editable mode[excluding
* primary key].
      flg = 'Y'.
    WHEN 'DELETE'.
* Setting the flag to make the table control in editable mode after
* deleting the selected line
      flg = 'Y'.
* Confirmation of delete
      CALL FUNCTION 'POPUP_TO_CONFIRM'
        EXPORTING
         TITLEBAR       = 'Confirm'
         text_question = 'Are you sure to delete from database?'
         TEXT_BUTTON_1 = 'Yes'(001)
         TEXT_BUTTON_2 = 'No'(002)
        IMPORTING
         ANSWER         = lv_answer.
      if lv_answer eq '1'.
* Updating the database table from the internal table
        UPDATE zzz_makt FROM TABLE i_makt.
* Deleting the selected row from the internal table
        DELETE i_makt WHERE pick = 'X'.
* Deleting the selected row from the database table
        DELETE FROM zzz_makt WHERE pick = 'X'.
        MESSAGE s005 WITH 'Deleted Successfully'.
      ENDIF.
    WHEN 'SAVE'.
* Inserting new record or updating existing record in database table
* from the internal table
      MODIFY zzz_makt FROM TABLE i_makt.
      MESSAGE s005 WITH 'Saved Successfully'.
    WHEN 'BACK'.
      SET SCREEN '0'.
    WHEN 'EXIT' OR 'CANCEL'.
* Leaving the program
      LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_9000 INPUT
*&      Module set_screen_fields OUTPUT
* Setting the screen fields
MODULE set_screen_fields OUTPUT.
LOOP AT SCREEN.
    IF flg IS INITIAL.
      screen-input = 0.
    ELSEIF ( flg EQ 'Y' ).
      IF ( ( screen-name = 'I_MAKT-ZMAKTX'
             OR screen-name = 'I_MAKT-CHECK1' )
            AND t_ctrl-current_line LE ln ) .
* Making the screen fields as editable
        screen-input = 1.
      ELSEIF ( ( screen-name = 'I_MAKT-ZMATNR' )
                 AND t_ctrl-current_line LE ln ).
* Making the screen field as uneditable
        screen-input = 0.
      ENDIF.
    ENDIF.
* Modifying the screen after making changes
    MODIFY SCREEN.
ENDLOOP.
ENDMODULE.                 " set_screen_fields OUTPUT
*&      Module zmatnr INPUT
* Appending records to the internal table
MODULE zmatnr INPUT.
MODIFY i_makt INDEX t_ctrl-current_line.
IF t_ctrl-current_line GT ln.
    READ TABLE i_makt WITH KEY zmatnr = i_makt-zmatnr.
    IF sy-subrc NE 0.
* Inserting record if it does not exist in database
      APPEND i_makt.
    ELSE.
     MESSAGE i005 WITH 'Material Number' i_makt-zmatnr 'already exists'.
    ENDIF.
ENDIF.
ENDMODULE.                 " zmatnr INPUT
*&      Module set_status OUTPUT
* Setting the GUI status
MODULE set_status OUTPUT.
SET PF-STATUS 'ZSTATUS'.
SET TITLEBAR 'ZTITLE'.
ENDMODULE.                 " set_status OUTPUT
*&      Module CHECK INPUT
* Modify the internal table using the current line in table control
MODULE check INPUT.
MODIFY i_makt INDEX t_ctrl-current_line.
ENDMODULE.                 " CHECK INPUT

How to know who has created a particular record in the data base table

Hi All...
Can any one tell me how to track the information about who has entered the records in to the data base table....
Thanks in advance...

You could check the Created By and Created On fields if your tables contains these fields.
OR
You could check the table DBTABLOG if table logging is enabled for the table
OR
You could check the Change document tables CDHDR and CDPOS.
-Kiran
Please mark useful answers

How to query the table

hi all,
where to find the enterpraise manager url....i forgot it
i need to know the enterprasie manager url,how to check this one from table.
how to query this,from which table it will be fetch...
pl share ur updates;

gk wrote:
hi all,
where to find the enterpraise manager url....i forgot it
i need to know the enterprasie manager url,how to check this one from table.
how to query this,from which table it will be fetch...What's the db version? AFAIK there is no table in which the EM's url is kept. You can see it from the command though emctl status dbconsole .
>
pl share ur updates;Please write proper words in a professional forum like this one.
Aman....

How to query the count of the temporary table from user_objects

e.g. select count(*) from user_objects where object_type='TABLE'
According to the SQL,I can query the all table including the temporary table,Can I how to query the count of the temporary table from user_objects excluding the permanent table?
thanks a lot!

select count(*) from user_objects where object_type='TABLE' and temporary = 'Y'

Data from 2 database blocks insert into the same base table?

Hello,
I have canvas C_NEW. On this canvas, items from 3 blocks are usable by the user.
1. Block NEW_HEAD: 3 items say X1,X2,X3
2. Block NEW : multi record text fields say Y1 thru Y10. Also a scrollbar.
3. Block NEW_ACTION: 6 buttons say B1 thru B6 (One of them is N_OK which is the item in question)
both the blocks NEW, NEW_HEAD are db blocks and have the same base table say BT. When the users click on the N_OK (after filling out the data in the NEW_HEAD block and then NEW in that order) I need the data from both the NEW, NEW_HEAD to go into the BT. Currently only the data from the NEW is going into BT. Fields in the BT table which correspond to the fields X1,X2,X3 in the NEW_HEAD remain null after clicking the N_OK button. I put commit_form in the N_OK code since both the blocks are db blocks( and as suggested by folks, it is easier to issue a commit_form than do a lot more work in writing my own SQL).
How can I achive this?
Thanks,
Chiru

I tried doing what you suggested by putting the following code in the program unit which gets called when_button_pressed.
PROCEDURE P_SAVE IS
v_lc_no number;
v_lc_seq number;
v_dmg_allow number;
BEGIN
Go_Block('B_new_head');
v_lc_no:= :B_new_head.N_LC_NO;
v_lc_seq:= :B_new_head.N_LC_SEQ;
v_dmg_allow:= :B_new_head.N_LC_DMG_ALLOW;
Go_Block('B_new');
FIRST_RECORD;
LOOP
     emessage('before insert'||v_lc_no||'-'||v_lc_seq||'-'||:B_new.order_no);
INSERT INTO ct_lc_import(
    LC_NUMBER,
    LC_SEQ,
    DAMAGE_ALLOWANCE,
    ORDER_NO,
    QTY_SHIPPED,
    UNIT_PRICE,
    DRAFT_AMOUNT,
    TICKET_DEDUCTION,
    SHIPMENT_PENALTY,
    TOTAL_DEBIT,
    DEBIT_DATE)
    VALUES (v_lc_no,
            v_lc_seq,
            v_dmg_allow,
            :B_new.order_no,
            :B_new.qty_shipped,
            :B_new.unit_price,
            :B_new.draft_amount,
            :B_new.ticket_deduction,
            :B_new.shipment_penalty,
            :B_new.total_debit,
            :B_new.debit_date);
   commit;
NEXT_RECORD;
   if :SYSTEM.LAST_RECORD='TRUE' then
         emessage('last record');
         EXIT;
   end if;
--NEXT_RECORD;
END LOOP;
EXCEPTION
   when FORM_TRIGGER_FAILURE then
      raise;
   when OTHERS then
      emessage(SQLERRM);
      raise FORM_TRIGGER_FAILURE;
END;But I can't see the records in the table eventhough the message pops up with the values before inserting the 1st record. It then exits. I would think it would atleast insert the very first record into the the table at the least.
Thanks,
Chiru

How to query the flat files?

Hi
How to query the flat files that are used in Etl From EBS source.

That can be done in OBIEE. Save the flat file as .csv format. Then go to ODBC Administrator on windows machine where you BI server is running, and create an System DSN and select "Microsft Access Text Driver (*.txt, *.csv)" as driver type.
Next, import tables in RPD using this ODBC connection. Rest of the steps as same as building model from a table source.
Hope this helps.

Query on Non-base-table column in form

Hi,
Does anyone have an example of code to allow users to query on non-base-table column from forms? For example, a personnel form displays a persons' name and department name. The form is based on PERSON table, which contains the department id, not the name. The form uses post-query to display the department name. When in query mode, the user wants to enter department name, and display the people in the department (still using this form, which is based on PERSON table.
Thanks!

Try this:
For data block person set these properties as follows:
1.Set Query Data Source Name = "person , departments"
2.Set DML data target name = "person"
3.Set Where Clause to join i.e. condition "person.dno = departments.dno"
For filed department name set these properties as follows:
1.Data base item = "Yes"
2.Column Name = "departments.dname"
3.Query Only = "Yes"
4.Insert Allowed = "No"
5.Update Allowed= "No"
6.Keyboard Navigable = "No"
If you face ambiguous column name check for the same filed name exist on both tables and set column name for this filed to person.filed_name
Regards
null

How to query the Product short code of EBS products?

I need to get all the Product short code of all EBS products. Is there any table record such kinds of short codes? thanks!

Hi,
However, these product codes are not associated with corresponding products and product families.
do you know how to query the product name , product short codes and product familiy together?Script to get Codelevels Summary in R12 and 11i
Re: Script to get Codelevels Summary in R12 and 11i
PS: all these tables are public to query or just allow oracle internal usage?As Apps user, you should be able to query these tables. For other database users, you need to check if the users have select privilege to access the tables or not.
Regards,
Hussein

Reg:How to delete the column in table control also from database table.

Hi Experts,
Once again thank u all for giving the responses.
one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
With Regards,
Saroja.P.

Hi,
If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
"This portion of code inside the LOOP...ENDLOOP.
IF sy-ucomm eq 'F_DELETE'.
gt_itab2-check = mark. " Store the MARK field status into your internal table's correspoding field 'check'
MODIFY gt_itab INDEX tabcontrol-current_line.
ENDIF.
iF sy-ucomm eq 'DELETE1'.
DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
ENDIF.
Now you can modify your database table using the MODIFY statement.
MODIFY ZDB FROM TABLE gt_itab.

How to calculate the quota base quantity in quota arrangement?

Hi all,
As we all know, when a new supplier is added in the quota arrangment, we take the help of quota base qunatity so that the new supplier does not get any unfair advantage over the existing suppliers. Would you please help me on how to calculate the quota base quantity or on what basis the quota base quantity is calculated?*
Regards,
Ranjan

Dear,
Quota arrangement divides the total requirements generated over a period of time among the sources of supplied by assigning a quota.
Quota u2013 quota is equal to a number and its represents the proportionate of requirements. Total quota of all the vendors is equal to 100% of requirements.
This quota arrangement is also specific to material and plant level.
Quota rating = quota allocate quantity + quota base quantity / quota.
Quota based quantity used only when a new vendor introduced.
In the as on date situation, the minimum quota ratings will considered as preferred vendor.
The 2 vendors has 2 same quota rating, the vendor who is having the highest quota will considered first.
In the running quota, a new source of supply is included. (In situation of short supply) including a new source not means to reduce the quota for existing.
Regards,
Syed Hussain.

How to find the list of Tables....

Hi
How to find the list of Tables associated with When a Goods Issue is done for a Process Order ??
Kindly tell me step-by-step procedure in browsing it.
cheers
MaruthiRam

Hi
goto SE16 Click F4, You have two options Information system & Sap Applications.
Click on SAP Applications & selec the application you wnat to see, for E.g Purchasing you can click on materials managemnt, Purchasing if you drill down you will see the list of tables....
reward points if useful
Thanks & Regards
Kiran

How to use the item of table(ms access) in pl/sql

I want to use oracle forms builer developer application with ms access database
I don't know how to use the item of table in the pl/sql;please help me !

MERGE INTO EmpDept Target
Using (SELECT E.Address,
e.Design,
e.EmailId,
e.EmpId,
e.Ename,
e.ManagerId,
e.Salary,
D.DeptId,
D.DeptName,
D.Location
FROM Employee E
INNER JOIN Dept D
ON E.DeptId = D.DeptId) AS Source (Address, Design, EmailId, EmpId, EName, ManagerId, Salary, DeptId, DeptName, Location)
ON Source.EmpId = Target.EmpId
WHEN NOT matched THEN
INSERT (Address,
Design,
EmailId,
EmpId,
Ename,
ManagerId,
Salary,
DeptId,
DeptName,
Location)
VALUES (Address,
Design,
EmailId,
EmpId,
EName,
ManagerId,
Salary,
DeptId,
DeptName,
Location)
WHEN matched THEN
UPDATE SET Address = Source.Address,
Design = Source.Design,
EmailId = Source.EmailId,
Ename = Source.Ename,
ManagerId = Source.ManagerId,
Salary = Source.Salary,
DeptId = Source.DeptId,
DeptName = Source.DeptName,
Location = Source.Location;

How to store the images in tables

how to store the images in tables .what is the use of "clob ,blob"

Using with the CLOB or BLOB, you can store the images in the table.
Srini C

How to specify the type of table in the form parameters

How to specify the type of table in the form parameters. for example, how to specify the type of table "vacancies".
FORM getcertainday
                   USING
                   vacancies TYPE STANDARD TABLE
                   efirstday LIKE hrp9200-zfirst_day
                   lfristday LIKE hrp9200-zfirst_day.

Hi
Are you asking about subroutine program to declare a variable for perform statement etc
if it so check this coding
DATA: NUM1 TYPE I,
NUM2 TYPE I,
SUM TYPE I.
NUM1 = 2. NUM2 = 4.
PERFORM ADDIT USING NUM1 NUM2 CHANGING SUM.
NUM1 = 7. NUM2 = 11.
PERFORM ADDIT USING NUM1 NUM2 CHANGING SUM.
FORM ADDIT
       USING ADD_NUM1
             ADD_NUM2
       CHANGING ADD_SUM.
ADD_SUM = ADD_NUM1 + ADD_NUM2.
PERFORM OUT USING ADD_NUM1 ADD_NUM2 ADD_SUM.
ENDFORM.
FORM OUT
       USING OUT_NUM1
             OUT_NUM2
             OUT_SUM.
WRITE: / 'Sum of', OUT_NUM1, 'and', OUT_NUM2, 'is', OUT_SUM.
ENDFORM.
If your issue is some other can u explain me clearly
Regards
Pavan

How to query the apex base tables .

Similar Messages

Maybe you are looking for