How to Raise Event in BW using ABAP program
Hi BW Experts,
Can anyone tell how to raise event in BW using a ABAP program.
Program should ask for the event to be raised and destination server.
Edited by: Arun Purohit on May 14, 2008 11:04 AM
Hi Arun,
By Using BP_EVENT_RAISE function module you can raise an event.Create an ABAP program and call the function module BP_EVENT_RAISE and create a avariant to specify the event to be raised. Schedule this ABAP code. Go to the start process type and set the schedule to "after event" and mention the event name that you created. Also, I think now you can mention the time as well and you can also schedule for periodic scheduling.
T Code : SM62 --> To Create an Event.
T Code : SE38 --> To Create an ABAP Program
Use Function Module : BP_EVENT_RAISE to raise an event.
Related links:
http://help.sap.com/saphelp_sem40bw/helpdata/EN/86/6ff03b166c8d66e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_sem40bw/helpdata/EN/86/6ff03b166c8d66e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_sem40bw/helpdata/EN/86/6ff03b166c8d66e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_sem40bw/helpdata/EN/86/6ff03b166c8d66e10000000a11402f/frameset
Hope this helps
Regards
CSM Reddy
Similar Messages
-
How to schedule a Process Chain using ABAP Program?
Hi All,
I want to schedule the activity of extracting data from the query to a flatfile.
Currently we are schedulling it using the transaction rscrm_bapi.
I need to know , how we can achieve the same using an abap program and not ( rscrm_bapi) in a process chain.
Any help would be appreciated.
Regards
PurvaYour problem will be solved if you use the Function Module "RSPC_API_CHAIN_GET_STATUS" instead of the function module "RSPC_API_CHAIN_GET_LOG".
The function module "RSPC_API_CHAIN_GET_STATUS" gives you the STatus of the process chain, when you pass the Chain Name and the Log ID.
If you get an output
G or F - Report that the Chain is Successfully Completed.
A - The chain is Currently running
R or X - Report that the chain has ended with Errors.
Sample code :
REPORT Z_BW_GET_STATUS_PROZESSKETTE.
TABLES rspclogchain.
DATA: gt_rspclogchain LIKE rspclogchain OCCURS 0,
wa_rspclogchain LIKE rspclogchain.
DATA: gt_log LIKE rspc_s_msg OCCURS 0,
wa_log LIKE rspc_s_msg,
gt_status like RSPC_STATE.
SELECT * FROM rspclogchain
INTO CORRESPONDING FIELDS OF TABLE gt_rspclogchain
WHERE datum = sy-datum
AND chain_id = 'BD_C02_1D'.
IF sy-subrc = 0.
SORT gt_rspclogchain BY datum DESCENDING
zeit DESCENDING.
READ TABLE gt_rspclogchain
INTO wa_rspclogchain INDEX 1.
CALL FUNCTION 'RSPC_API_CHAIN_GET_STATUS'
EXPORTING
i_chain = wa_rspclogchain-chain_id
i_logid = wa_rspclogchain-log_id
IMPORTING
E_STATUS = gt_status.
IF gt_status = 'G' or gt_status = 'F'.
WRITE :/ 'BD_C02_2D chain COMPLETED'.
ELSE.
WRITE :/ 'BD_CO2_2D chain is Running or Ended with Errors'.
ENDIF.
ELSE.
WRITE :/ 'No chain BD_C02_2D started for today ! or keine Kette BD_C02_2D gestartet !'.
ENDIF.
I have just provided a sample code, you might have to edit or add necessary messages to the program.
Regards,
Ramya -
How to display a HTML page using ABAP program.
Hi all,
I know that this is easy and possible too but I haven't worked on this kind yet. I need to display a screen/ABAP program like TCODE PPMDT, where an HTML page is to be displayed and on the click of the HTML links provided, I need to navigate to someother transaction codes.
Cheers,
SamHi,
See this sample code
REPORT ZTESTHTML .
DATA: ok_code LIKE sy-ucomm,
myurl(132).
data: custom_container type ref to cl_gui_custom_container,
myhtml type ref to CL_GUI_HTML_VIEWER,
repid like sy-repid.
DATA events TYPE cntl_simple_events.
DATA wa_events TYPE cntl_simple_event.
CLASS lcl_event_receiver DEFINITION
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
CLASS-METHODS NC_Handler
FOR EVENT NAVIGATE_COMPLETE OF CL_GUI_HTML_VIEWER
IMPORTING URL.
ENDCLASS.
CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD NC_Handler.
myurl = URL.
ENDMETHOD.
ENDCLASS.
start-of-selection.
set screen 100.
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
WHEN 'BACK'.
CALL METHOD myhtml->go_back
EXCEPTIONS cntl_error = 1.
if sy-subrc ne 0.
endif.
WHEN 'FORW'.
CALL METHOD myhtml->go_forward
EXCEPTIONS cntl_error = 1.
if sy-subrc ne 0.
endif.
WHEN 'STOP'.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'REFR'.
CALL METHOD myhtml->SHOW_URL
EXPORTING
URL = myurl
IN_PLACE = 'X'
FRAME = ''
EXCEPTIONS
CNTL_ERROR = 1
CNHT_ERROR_NOT_ALLOWED = 2
CNHT_ERROR_PARAMETER = 3
DP_ERROR_GENERAL = 4.
WHEN 'OTHERS'.
CALL METHOD CL_GUI_CFW=>DISPATCH.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MENU'.
if myhtml is initial.
CREATE OBJECT custom_container
EXPORTING
CONTAINER_NAME = 'CONTAINER1'
EXCEPTIONS
CNTL_ERROR = 1
CNTL_SYSTEM_ERROR = 2
CREATE_ERROR = 3
LIFETIME_ERROR = 4
LIFETIME_DYNPRO_DYNPRO_LINK = 5.
CREATE OBJECT myhtml
EXPORTING
PARENT = custom_container
EXCEPTIONS
CNTL_ERROR = 1
CNTL_INSTALL_ERROR = 2
DP_INSTALL_ERROR = 3
DP_ERROR = 4.
wa_events-eventid = CL_GUI_HTML_VIEWER=>M_ID_NAVIGATE_COMPLETE .
wa_events-appl_event = 'X'.
APPEND wa_events TO events.
CALL METHOD myhtml->set_registered_events( events = events ).
SET HANDLER lcl_event_receiver=>NC_Handler FOR myhtml.
CALL METHOD cl_gui_cfw=>flush
EXCEPTIONS cntl_system_error = 1
cntl_error = 2.
endif.
ENDMODULE. " STATUS_0100 OUTPUT
Svetlin -
How to upload data into IT0000 using ABAP-HR program
Hello,
I'm required to upload data into multiple infotypes [IT000, 0001, 0002, etc] using single input text file. Can anyone able to guide me, how to upload data into IT0000 using ABAP program ?
Thanks in advance.
Regards
Prabhakar.
Message was edited by:
Prabhakara MuthyalExample code for HR_MAINTAIN_MASTERDATA to COPY IT0002
DATA: INT_0002_FINAL TYPE STANDARD TABLE OF PA0002 WITH HEADER LINE.
DATA: VALUES LIKE PPROP OCCURS 10 WITH HEADER LINE,
RETURN LIKE BAPIRETURN1,.
LOOP AT INT_0002_FINAL.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-PERNR'.
VALUES-FVAL = INT_0002_FINAL-PERNR.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-BEGDA'.
VALUES-FVAL = INT_0002_FINAL-BEGDA.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-ENDDA'.
VALUES-FVAL = INT_0002_FINAL-ENDDA.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-nachn'.
VALUES-FVAL = INT_0002_FINAL-NACHN.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-gblnd'.
VALUES-FVAL = INT_0002_FINAL-GBLND.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-vorna'.
VALUES-FVAL = INT_0002_FINAL-VORNA.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-rufnm'.
VALUES-FVAL = INT_0002_FINAL-RUFNM.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-name2'.
VALUES-FVAL = INT_0002_FINAL-NAME2.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-inits'.
VALUES-FVAL = INT_0002_FINAL-INITS.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-famst'.
VALUES-FVAL = INT_0002_FINAL-FAMST.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-gbdat'.
VALUES-FVAL = INT_0002_FINAL-GBDAT.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-sprsl'.
VALUES-FVAL = INT_0002_FINAL-SPRSL.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-anzkd'.
VALUES-FVAL = INT_0002_FINAL-ANZKD.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-natio'.
VALUES-FVAL = INT_0002_FINAL-NATIO.
APPEND VALUES.
* maintain master data
CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'
EXPORTING
PERNR = INT_0002_FINAL-PERNR
ACTIO = 'COP'
BEGDA = INT_0002_FINAL-BEGDA
* ENDDA = INT_0002_FINAL-ENDDA
SUBTY = SPACE
NO_ENQUEUE = SPACE
DIALOG_MODE = '0'
TCLAS = 'A'
IMPORTING
RETURN1 = RETURN
TABLES
PROPOSED_VALUES = VALUES
* MODIFIED_KEYS =
EXCEPTIONS
OTHERS = 1.
IF RETURN IS INITIAL.
WRITE:/' Done....'.
ELSE.
WRITE:/ RETURN-ID, RETURN-TYPE, RETURN-NUMBER, RETURN-MESSAGE_V1, RETURN-MESSAGE_V2, RETURN-MESSAGE_V3, RETURN-MESSAGE_V4.
ENDIF.
CLEAR VALUES.
REFRESH VALUES.
ENDLOOP. -
Unzip files using ABAP program
Hi All,
Can anybody guide me how to Unzip a .zip file using ABAP program... Appreciate your immediate reply...
actually, my scenario is to check whether zip file is created in appl.server or not.., and if zip file created then i need to check whether its blank file or any content exist inside the file...
Thanks in advance
Bhaskerhi
good
parameters: command(236) lower case.
data: std_lines(255) occurs 0 with header line.
call function 'RFC_REMOTE_PIPE'
destination 'SERVER_EXEC'
exporting
command = command
read = 'X'
tables
pipedata = std_lines
exceptions
communication_failure = 1
system_failure = 2.
You should put your Unix command in the command parameter. "gunzip /yourfilepath/yourfilename" works on my Unix system. Once you determine the proper Unix command, you should be set. This technique is also nice because it provides you with echos back from Unix in table std_lines. For more complex Unix activity, you may want to consider throwing together a Unix script, and calling that via this code.
reward point if helpful.
thanks
mrutyun^ -
How-to trigger a process chain using ABAP?
Does anybody know how to trigger a process chain using ABAP code?
Any help would be appreciated!
Thanks
IoanHi Ioan,
try this in your ABAP:
CALL FUNCTION 'BP_EVENT_RAISE'
EXPORTING
eventid = 'Your Event'
eventparm = 'START'
target_instance = ' '
EXCEPTIONS
OTHERS = 01.
and schedule your process chain, waiting for 'Your Event'.
regards
Siggi -
How to upload an excel file using ABAP.
Hi,
Can anyone please help me in understanding how to upload an excel file using ABAP.
Thanks!!http://diocio.wordpress.com/2007/02/12/sap-upload-excel-document-into-internal-table/
check the link
TYPES: Begin of t_record,
name1 like itab-value,
name2 like itab-value,
age like itab-value,
End of t_record.
DATA: it_record type standard table of t_record initial size 0,
wa_record type t_record.
DATA: gd_currentrow type i.
*Selection Screen Declaration
PARAMETER p_infile like rlgrap-filename.
*START OF SELECTION
call function ALSM_EXCEL_TO_INTERNAL_TABLE
exporting
filename = p_infile
i_begin_col = 1′
i_begin_row = 2′ Do not require headings
i_end_col = 14′
i_end_row = 31′
tables
intern = itab
exceptions
inconsistent_parameters = 1
upload_ole = 2
others = 3.
if sy-subrc <> 0.
message e010(zz) with text-001. Problem uploading Excel Spreadsheet
endif.
Sort table by rows and colums
sort itab by row col.
Get first row retrieved
read table itab index 1.
Set first row retrieved to current row
gd_currentrow = itab-row.
loop at itab.
Reset values for next row
if itab-row ne gd_currentrow.
append wa_record to it_record.
clear wa_record.
gd_currentrow = itab-row.
endif.
case itab-col.
when 0001′. First name
wa_record-name1 = itab-value.
when 0002′. Surname
wa_record-name2 = itab-value.
when 0003′. Age
wa_record-age = itab-value.
endcase.
endloop.
append wa_record to it_record.
*!! Excel data is now contained within the internal table IT_RECORD
Display report data for illustration purposes
loop at it_record into wa_record.
write:/ sy-vline,
(10) wa_record-name1, sy-vline,
(10) wa_record-name2, sy-vline,
(10) wa_record-age, sy-vline.
endloop. -
In ecatt - how to check at database level using ABAP
Hi,
How to check at database level using ABAP in Ecatt tool.
say,for example I want to check a particular sales order is invoiced or not ,at the database level and if it is invoiced I have stop proceeding to invoicing of that sales order number.
Could anybody suggest on this with an example?
thanks.Hi,
you can use the command GETTAB to access single db records.
Full specified or partitial specified keys can be use at GETTAB. It will return always only one record, also if a couple could match your selection.
For more advanced scenarios you can also use eCATTs Inline ABAP. In a block between the commands ABAP. ENDABAP. you can code ABAP statements, e.g. SELECT ... INTO TABLE ...
eCATT script parameters of type 'V' defined in that script using ABAP/ENDABAP will be transfered into the ABAP block and back to script after ABAP perform.
Best regards
Jens -
How to generate new perner number using Abap Code in pa0002. what is the fu
how to generate new perner number using Abap Code in pa0002. what is the function Module used.
hi
define internal number ranges for ur implementation then when u run PA 40 do not input any employee number , system will generate the employee number automatically.
Regards
sameer -
HOW TO creat BAR CHART using ABAP Programming
DEAR ALL,
I want some help as to how to creat GRAPHICAL display using ABAP programing (BAR CHART) any sample codes Example will be very helpful.
Regards,
VJOn earlier versions, you can do something like this.
[code]
REPORT ZRICH_0005 .
DATA: BEGIN OF ITAB_DATA OCCURS 0,
DATANAME(15),
QUANTITY1 TYPE I,
QUANTITY2 TYPE I,
QUANTITY3 TYPE I,
END OF ITAB_DATA.
Data: BEGIN OF ITAB_OPTIONS OCCURS 0,
OPTION(20),
END OF ITAB_OPTIONS.
ITAB_DATA-DATANAME = 'Maple'.
ITAB_DATA-QUANTITY1 = 5500.
ITAB_DATA-QUANTITY2 = 6200.
ITAB_DATA-QUANTITY3 = 5900.
APPEND ITAB_DATA.
ITAB_DATA-DATANAME = 'Oak'.
ITAB_DATA-QUANTITY1 = 3500.
ITAB_DATA-QUANTITY2 = 5200.
ITAB_DATA-QUANTITY3 = 4400.
APPEND ITAB_DATA.
ITAB_DATA-DATANAME = 'Cherry'.
ITAB_DATA-QUANTITY1 = 1800.
ITAB_DATA-QUANTITY2 = 2200.
ITAB_DATA-QUANTITY3 = 1900.
APPEND ITAB_DATA.
CALL FUNCTION 'GRAPH_MATRIX_3D'
EXPORTING
COL1 = 'Jan'
COL2 = 'Feb'
COL3 = 'Mar'
TITL = 'Lumber Usage in $'
TABLES
DATA = ITAB_DATA
OPTS = ITAB_OPTIONS
EXCEPTIONS
OTHERS = 1.
[/code]
Regards,
Rich Heilman -
How to Move file / call UNIX command using ABAP Program
Hi, ABAP Guru.
I need to Cut & Paste file (Move file from one location to another location) on Network Shared Drive using ABAP program.
But I can't figured out how to do this and what ABAP Command / FM / Method (and maybe UNIX command) that being used.
Please give me the advice.
Best regard and Thank you all.
Nattapash C.all methods for your requirements should be in class CL_GUI_FRONTEND_SERVICES
-
How to print external file using ABAP program
Hello
I want to print an external file which is located in server (
20.99.0.18\GUI\xyz\8.0QUALITY\QM_TS.DOC) .....i want to print these kind of files(which i have retrieved from table 'DRAW' field 'filep' )......i need to print these files using ABAP program.
thank you
Vikram.
Message was edited by:
Vikram Bojjaextract the data and pass to script or smartform for printing
-
Synchronizing Two Custom Z Tables Using Abap Program
Hi,
My requirement is Synchronizing two custom z tables using abap program me.
I have vendors in two tables, i have to select the common vendors from first which are existing in second table also.
In first table each vendor can have more than one supplier types in one field only. In second table these supplier types are divided into
different fields.
My requirement is I have to check supplier types in first table and i have to pass X to corresponding supplier types in second table vendor.
I have to pass X value for each depending in Second table depending upon supplier type in first table.
. How to do it can any one suggest with code.
Thanks in Advance,
Vivek
<subject edited by moderator>
Message was edited by: Manish KumarHi,
Imho, you need to get (meaning, extract into separate fields) the different supplier types from Table1 first. Your key for Table1 is the vendor no, which is also the key in Table2 (or the key for Table2 is Vendor no & Type).
For better performance, better select multiple/all required entries from Table1 instead of doing a select endselect.
Depending on the format of the vendortypes in Table1, put them in a new itab (for our purpose named Table1New where vendor no & type are the only 2 fields. For example, if the type length is fixed to 2 chars, or divided by space,... use your coding accordingly.
Next step is to select all vendor no's in Table2 which you have selected in Table1. If in Table2, the vendor no is the only key (and the all vendor types are filled in a single record), then loop check the vendor types from Table1New against the types in Table2.
If the key of Table2 is vendor no & vendor type, then do a read table for the key.
The logic in pseudo-code:
Select from Table1 into table. If you'd like to limit the selection size, add package size statement.
extract the vendor types in to itab Table1New.
Select the vendor & types from Table2 by using the for all entries option (better performance).
loop at Table1New
check in Table2:
if the unique key is vendor no: check all fields for the vendor type from Table1New
if the unique key combo is vendor no & type: check by using a read table.
If not found => add entry to Table2
endloop.
endselect Table1 (when using package size)
I guess the most difficult step is to extract the types from Table1 into separate fields, all the rest seems straight forward. Please keep in mind the itab type definitions for a better performance.
Good luck!
Best regards,
Zhou -
How to avoid time out error in abap program
How to avoid time out error in abap program
based on performance wise i want please helpTimeout occurs when a statement exceeds its time limit.To avoid this we need to tune the statements.
I can give give you few tips for tune a select stament.
1.The order of the feilds in the select statement should be same as the order of fields in the database table.
2.It is always advisible to use the key fields when you are using the where clause.
3. Sort the internal table while using the for all entreis statements.
4.Use index in where clause if necessary.
5.When you have a read statement user binary search but before this a sort statement should be there.
6. Check your program with the Tcode ST05 and check which statement takes much time based on that tune that. -
How to improve the performance of the abap program
hi all,
I have created an abap program. And it taking long time since the number of records are more. And can anyone let me know how to improve the performance of my abap program.
Using se30 and st05 transaction.
can anyone help me out step by step
regds
harithaHi Haritha,
->Run Any program using SE30 (performance analysis)
Note: Click on the Tips & Tricks button from SE30 to get performance improving tips.
Using this you can improve the performance by analyzing your code part by part.
->To turn runtim analysis on within ABAP code insert the following code
SET RUN TIME ANALYZER ON.
->To turn runtim analysis off within ABAP code insert the following code
SET RUN TIME ANALYZER OFF.
->Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
->Avoid for all entries in JOINS
->Try to avoid joins and use FOR ALL ENTRIES.
->Try to restrict the joins to 1 level only ie only for tables
->Avoid using Select *.
->Avoid having multiple Selects from the same table in the same object.
->Try to minimize the number of variables to save memory.
->The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
->Avoid creation of index as far as possible
->Avoid operators like <>, > , < & like % in where clause conditions
->Avoid select/select single statements in loops.
->Try to use 'binary search' in READ internal table. -->Ensure table is sorted before using BINARY SEARCH.
->Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
->Avoid using ORDER BY in selects
->Avoid Nested Selects
->Avoid Nested Loops of Internal Tables
->Try to use FIELD SYMBOLS.
->Try to avoid into Corresponding Fields of
->Avoid using Select Distinct, Use DELETE ADJACENT
Check the following Links
Re: performance tuning
Re: Performance tuning of program
http://www.sapgenie.com/abap/performance.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
check the below link
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
See the following link if it's any help:
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Check also http://service.sap.com/performance
and
books like
http://www.sap-press.com/product.cfm?account=&product=H951
http://www.sap-press.com/product.cfm?account=&product=H973
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Performance tuning for Data Selection Statement
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
Debugger
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
Run Time Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
SQL trace
http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm
CATT - Computer Aided Testing Too
http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm
Test Workbench
http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm
Coverage Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm
Runtime Monitor
http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm
Memory Inspector
http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm
ECATT - Extended Computer Aided testing tool.
http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
Just refer to these links...
performance
Performance
Performance Guide
performance issues...
Performance Tuning
Performance issues
performance tuning
performance tuning
You can go to the transaction SE30 to have the runtime analysis of your program.Also try the transaction SCI , which is SAP Code Inspector.
edited by,
Naveenan
Maybe you are looking for
-
Upgrade Snow Leopard 10.6.2 to Snow Leopard Server 10.6
Hi, I'm trying to upgrade one existing Mac with SL (10.6.2) to SLServer. SLS was bought 2 months ago and I guess it's still the original 10.6. When I try to install it over the updated Snow Leopard it will fail with an error indicating that it is an
-
we want to track the number of ebooks downloaded from content server publish by us , how we can track this?
-
Audio Sync Problem with Uncompressed HD Quicktime
Hi, I have an Uncompressed 10-bit 4:4:4 BlackMagic Quicktime file (it's about 250 GB) that's a silent version of my short film. The video plays back at 23.98 fps. I'm now trying to sync my final sound mix back to this video in Final Cut Pro 6. The so
-
Scanjet 3200c will not install on xp system
scanjet 3200c will not install on xp system
-
What gets deleted when i erase mt iphone from icloud?
my phone is in the wrong hands and i want to delete all my apps. i deleted my iphone from icloud already. is that going to delete all the apps? i really need an answer ASAP please!!!!! thank you