How to raise Panel's click event?

I have a button placed inside a panel and its dock property is set to FILL. When user clicks on that button, I want the panel's click event also to be raised. I tried setting panel capture property to TRUE, but the panel's click event is not rising. Can
anyone please help me out with this problem?
Thank you in advance

Hi,
You can call the Panels Click event sub like you would any other sub. I am not sure why you can`t just place the code from the Panel`s Click event sub into the Buttons Click event sub which would do the same thing but, if you really need to do it this
way then here is an example.
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Panel1_Click(sender, e)
End Sub
Private Sub Panel1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Panel1.Click
MessageBox.Show("Panel Clicked")
End Sub
End Class
After looking through some of your questions, maybe you want something like this so that the parent Panel of the button actually is the sender of the Panel`s click event.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim btn As Button = DirectCast(sender, Button) 'get the button from the "sender"
Panel1_Click(btn.Parent, e) 'raise the Panel click event with the Parent panel of the button as the "sender"
End Sub
Private Sub Panel1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Panel1.Click
Dim pnl As Panel = DirectCast(sender, Panel) 'get the panel from the "sender"
MessageBox.Show(pnl.Name & " Clicked")
End Sub
If you say it can`t be done then i`ll try it

Similar Messages

How can i call mouse click event from keypress event???

How can i call mouse click event from keypress event???
I want same GUI changes to be occured at key press.....i.e . button going down & comming up.....
for calculator

Put all the code that happens on those events into a method. Then call that method from both events.

How to raise a self-defined event with parameters in program

Hi,all,
I want to raise a self-defined event with parameters in one of my method ,how to do that?Thanks

Hi Ray,
If your event name is MYEVENT and the parameter name is MYPARA and the value you want to pass to this parameter is L_PARAVALUE, use the following -
wd_this->fire_myevent_evt( mypara = l_paravalue ).
If the event is to be raised in an a view, then you need to get the component controller instance first and use it instead of wd_this.
Also, this can be obtained directly by clicking on the WD Code Wizard ->Radio button for raise event->selecting your event.
Regards,
Neha
PS:Reward if helpful

How can I capture mouse click events on BSP or Web Dynpro ABAP Screen

hi Guys,
Currently we have a user inactivity problem,
the requirement is: if user is clicking on BSP/Web Dynpro ABAP screen, he/she is considered active. so we need an mechanism to capture the mouse click event.
Using Firebug, we found that this js is in the iframe which contains BSP/web dynpro scrren: /sap/public/bc/ur/nw5/js/languages/urMessageBundle_en.js
we want to find this js file & put in some javascript code to track user's mouse click, but i cannot find it on server.
while in ie if we type http://host:port/sap/public/bc/ur/nw5/js/languages/urMessageBundle_en.js
this file can be downloaded, means this file is there.
Any one can help on this issue? find the js file or another way to capture the mouse click event.
Thanks a lot with points!

Hi Feng Guo,
We can not capture mouse click events on Web Dynpro ABAP Screen . I am not sure about BSP. But as for as I know the portal keep active the iViews until unless mouse clicks happens.
But for your problem I think you can get solution by setting iView Expiration to some more time period.
Regards,
Siva

How can make Jpanel response click event?(help!)

in a program i want to make jpanel response mouseclicked event, but jpanel class does not provide addActionListener(). through which way? i am able to arrive at the purpose! (create a new class extends jpanel, how to do?)
thank a lot!!!

Hello,
have a look:import java.awt.Color;
import java.awt.event.*;
import javax.swing.*;
public class ClickPanel extends JPanel implements MouseListener
     public static void main(String[]args)
          JFrame frame = new JFrame("Click-Panel");
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          frame.getContentPane().setLayout(null);
          frame.getContentPane().add(new ClickPanel());
          frame.setBounds(200,200,400,400);
          frame.setVisible(true);
     public ClickPanel()
          addMouseListener(this);
          setBounds(200,200,100,100);
          setBackground(Color.CYAN);
     public void mouseClicked(MouseEvent e)
          System.out.println("clicked");
     public void mouseEntered(MouseEvent e)
          System.out.println("entered");
          setBackground(Color.ORANGE);
     public void mouseExited(MouseEvent e)
          System.out.println("exited");
          setBackground(Color.CYAN);
     public void mousePressed(MouseEvent e)
          System.out.println("pressed");
     public void mouseReleased(MouseEvent e)
          System.out.println("released");
}regards,
Tim

Raise a button's click event handler from another event handler

hi,
I am trying to raise a button's click event from another button's click event.
Automation gives a runtime error. I checked out some other forums for answers but they dont work when called from another event handler.
Console.WriteLine(gestureData.name);
if (s==b2) ;
//raise button2's click event
private void b2_Click(object sender, RoutedEventArgs e)
MessageBox.Show("I am button2");
private void b3_Click(object sender, RoutedEventArgs e)
MessageBox.Show("I am button3");
Any help will be appreciated.
Thanks,
Shaleen
TheHexLord

Hi Andy,
I tried to implement your suggestion.
What I am trying to do is, say there is a label whose content property needs to be updated every time a button b1 is clicked. When the button is clicked , it check if a condition is met and depending upon that condition it updates the content of the label
. Say , if the text entered is "add" and the button is clicked and the label's content is set to "add", if the text entered is "sub" and then the button is clicked, the label's content is set to "sub".
I understand that there is no need to fire up different methods for this as this can be done by checking for conditions in the same button click event but it seems that updating the UI is not happening. I get an error saying.:
A first chance exception of type 'System.InvalidOperationException' occurred in WindowsBase.dll
The program '[6660] WpfApplication8.vshost.exe: Program Trace' has exited with code 0 (0x0).
The program '[6660] WpfApplication8.vshost.exe: Managed (v4.0.30319)' has exited with code -1073741819 (0xc0000005) 'Access violation'.
this goes away when I remove the Label.Content="add" or Label.Content= "sub";
I think the label's content property does not update dynamically.
Thanks
TheHexLord

How to trigger the "click" event using javascript in LC8?

I have 2 button in the form. I don't want the user to click the button1 directly (invisible now). but I want the user click the button2 and then do some checking. after checking is finisined, the script will continue to trigger the button1 "click" event. How to trigger the button1 "click" event through javascript in LC 8? Thanks.

button2.execevent("click");

Kill the MouseEven.CLICK event when mouse is held down?

I have been studying games on Facebook and am trying to emulate mouse event handling. For example in ChefVille you can click on objects and drag them around. But if you hold the mouse down you pan the entire game environment and when you release the mouse button a click is NOT registered on the object below the mouse. In my tinkering the CLICK event is triggered on the release of the mouse button no matter how long I keep the button depressed. How do I keep the CLICK event from firing if the mouse is held down for some period of time?

I don't know that you can cancel a CLICK event in the middle of it happening (CLICK = MOUSE_DOWN followed by MOUSE_UP), but you can trigger a Timer on the MOUSE_DOWN event and use its event handler to set a boolean variable that your CLICK event handler function can make use of to decide whether or not to process a CLICK event.

Handle single click event in ALV OOPS

Hi,
I have to display 2 ALV grid...one above the other.
Top ALV will contain Header info and bottom ALV witll display line item.
I am use ALV OOPS.
Now when user will click on the top ALV ...bottom ALV should show corresponding data.
I don't have to use HOTSPOT or Double click event.
How can I handle single click event.
Please guide me..thanks in advance
Regards,
Prasoon

hi,
 for this in ALV OOPS take 2 custom containers( cl_gui_custom_container)in the same screen and on the 1st container display the header data(use set_tale_for_first_display method of class cl_gui_alv_grid).
 On the 2nd screen item data for this use EVENT handling(you want single click). use hotspot_click or button_click events.
for this you have to register the events. the code for that.
CLASS lcl_event_handler DEFINITION .
PUBLIC SECTION .
METHODS:
*--Hotspot click control
handle_hotspot_click
FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id e_column_id es_row_no ,
*--To control button clicks
handle_button_click
FOR EVENT button_click OF cl_gui_alv_grid
IMPORTING e_oject e_ucomm .
PRIVATE SECTION.
ENDCLASS.
CLASS lcl_event_handlerIMPLEMENTATION .
*--Handle Hotspot Click
METHOD handle_hotspot_click .
PERFORM handle_hotspot_click USING e_row_id e_column_id es_row_no .
ENDMETHOD .
METHOD handle_button_click .
PERFORM handle_button_click USING e_object e_ucomm .
ENDMETHOD .
ENDCLASS .
DATA gr_event_handler TYPE REF TO lcl_event_handler .
*--Creating an instance for the event handler
CREATE OBJECT gr_event_handler.
*--Registering handler methods to handle ALV Grid events
SET HANDLER gr_event_handler->handle_hotspot_click FOR gr_alvgrid .
SET HANDLER gr_event_handler->handle_button_click FOR gr_alvgrid .
do n't forget to use refresh_table_display
 other wise only the record which you first you clicked will display in the 2nd container.
Reward points for useful Answers

Click event on a item renderer stops data being passed

Hi
I'm trying to create a item renderer based on a Canvas, this renderer is then used in a List component. I'm trying to get a click event fired when the user clicks on one of the items in the List. I'm also formatting the data being passed into the item renderer to do this I'm overriding the set data property like this:
override public function set data(value:Object):void
title.text = value.marketName;
sellPrice.text = value.sellPrice;
buyPrice.text = value.buyPrice;
change.text = value.percentageChangeOnDay;
var i:String = "-";
if(String(value.percentageChangeOnDay).indexOf(i))
change.styleName = "PositiveChange";
else
change.styleName = "NegativeChange";
When I add a click event to my item renderer like this,
<view:DisplayItem click="itemClickedEvent( event )" />
I get a null reference error in my set data function. If I remove the click event the data is passed correctly, I've also found that if I use a rollOut event like this,
<view:DisplayItem rollOut="rolledOverEvent( event )"/>
the data is passed fine and the event works too, it seems that click events cause the data not to be passed.
Why does having a click event cause this problem? How can I have a click event on the item renderer and still format my data?
Cheers
Stephen

Found out that I can use the itemClick event of the List component I'm using my item renderer in, so really my item renderer does not need a click event.

Control Click Event

I am wring a graphics application that requires the user to click mouse to receive some specific response and to hold the ctrl button down and then click with the mouse to receive some other feedback.
Does anyone know how to capture a "ctrl + click" event? I have spent tens of hrs on that project and this is one of my hurdles.
Any suggestion, sample code, advise, would be greatly appreciated.
Del

Have a look in the API at the MouseEvent class (http://java.sun.com/j2se/1.4.1/docs/api/java/awt/event/MouseEvent.html), lots of useful stuff about how to check for key modifiers.
Specifically, have a look at the super class, InputEvent, and the method
public boolean isControlDown()
Cheers,
Radish21

Mouse Click Event

Hi, can any one tell me how to capture the mouse click event in the report ? For example suppose the user is double clicking in a perticular coulmn in a report output, I want to show him/her a message.
Thanks
Feroz

Feroze,
I think it is not possible to capture mouse click at report runtime. But you can use buttons in report. It will work.

How to raise on click event for Single Markable cell in WD Table

Hi All,
 I want to raise an event when a cell is clicked on Single Markable Cell and get the row and column of that cell.
I have tried all the events of the table and also On Enter event of input Field.
But I am not able to trigger on click event .
Please help me out. Points will be rewarded.
Thanks,
Anil

Hi Anil,
 If the cell editor is a link to action then it triggers the ON CLICK event , Write the following code into
 the ON CLICK event handler to get the selected Row and Column ID.
 Event Properties is a node with two attributes Name and Value of type string.
data: lr_node type ref to if_wd_context_node,
lt_event_properties type wd_this->elements_event_properties,
ls_event_properties type wd_this->element_event_properties.
field-symbols: <l_value> type any.
* fill internal table
ls_event_properties-name = 'COLUMN_ID'.
ls_event_properties-value = r_param->column.
append ls_event_properties to lt_event_properties.
ls_event_properties-name = 'INDEX'.
ls_event_properties-value = r_param->index.
append ls_event_properties to lt_event_properties.
ls_event_properties-name = 'ATTRIBUTE'.
ls_event_properties-value = r_param->attribute.
append ls_event_properties to lt_event_properties.
assign r_param->value->* to <l_value>.
ls_event_properties-name = 'VALUE'.
ls_event_properties-value = <l_value>.
append ls_event_properties to lt_event_properties.

How to add add the code for the MouseEvent.CLICK event

Could anyone help me who is a beginner please?
I'd like to know step by step how to do the following
instruction.
I am trying to add a link to my flash.
I drew a shape on the stage, select it and transform it to
movie clip (hit F8 or right-click on it and select "Convert to
symbol" from the popup menu or use the main menu: Modify ->
Convert to symbol). I resized it as the same size as my stage, then
make it transparent.
Then I am supposed to do the following in order to create a
link.
"add the code for the MouseEvent.CLICK event that would open
a url using the navigateToURL() function."
But I just don't know how to. Could anyone tell me step by
step approach please?
Thanks in advance.

Yes, click the frame where you have the button on stage and
open the actions panel. paste the script in, and make sure whatever
instance name you gave the button, you plug into the script. Also,
the function declaration should be like so:
function callFunction(e:MouseEvent):void{ <-- 'e' can be
anything you want, it could be 'kfjeiwajfkd' for that
matter.

How to add click event to MatrixLayoutRow

Hi all,
I want to add click Event to MatrixLayoutRow, Do you know how to add this Event ?

Hi there,
That link appears to be broken. I'm not sure what you mean by "no .css file was created". Edge does not directly use .css files.
To add a button action to an object in Edge is straightforward. See this video at the 2:00 mark:
http://www.youtube.com/watch?v=ysReea4yyys
Here's a breakdown of how to add a click event to an object:
1) click the curly braces to the left of the object in the Elements panel. This will launch the code event panel for your object.
2) click the "+" button at top left and select "click", to add a click event to your object.
3) assuming your object is on the root Stage, you can use the code presets at the right of your click event. Click the "play from" button at right of the events panel. This will insert sym.play(1000); which tells the timeline to play from the 1 second mark. You can change the play parameter to a frame label, say "intro", like this: sym.play("intro");
Look at the Edge Animate API for more details on the play method:
http://www.adobe.com/devnet-docs/edgeanimate/api/current/index.html

How to raise Panel's click event?

Similar Messages

Maybe you are looking for