How to re-trigger BA00 after sales order has been rescheduled

Dear Gurus,
Could you please kindly advise how I could re-trigger BA00 after sales order has been rescheduled?
The scenario is following:
When the sales order was completed, the order confirmation output has been sent to the customer. But later, when the ATP confirmed quantity was changed or order was rescheduled, the committed delivery date has been changed. It caused confusion, because in the order confirmation letter we sent to customer, there is a different date.
I'd like to also trigger BA00 to resend the order confirmation, but I checked the output routine, it only checks if the order is completed or not. Shall I　ask ABAPer to add additional logic in the routine or there is other easier way to re-trigger BA00?
Many thanks in advance!

Have you allowed multiple issue for BA00 output type? In that case, you can manually trigger it from VA02. If you are trying to have it sent automatically, then add the logic into the routine.

Similar Messages

  • Adding one specification sheet after sales order has been generated

    Hi Experts,
    Our client is asking to introduce one specification sheet to have the review on the particular after getting sales order,
    How can we introduce the specification / review sheet, they want to have this before MRP run,
    Please suggest the method,
    Thanks

    Yes it has been answered

  • TS4009 how do you retrieve information after the system has been reset to default

    how do you retrieve information after the system has been reset to default?

    From a backup on itunes or icloud, assuming you have made backups.  Connect to itunes and in the first tab for your device, choose to perform a restore.

  • How to block material issuing after sales order invoiced?

    As the subject mentioned,  could be a possible to block material issuing since sales order invoiced, or
    in the another words, after the sales order completed?
    Or could be a possible to set sales order as closed, and then material issuing related with this sales order are
    forbidden?
    Thanks in advanced,
    Zhou Zhen

    Dear Friend
    A sales order is created say order no 10000 and for material X say 10 units this order is delivered and PGIed and invoiced and the payment too has come
    That means the order 10000 is closed
    Case 1
    Now an user goes to VA02 t code and put this order no 10000 and changes the material X qty from 10 to 12 and opens up the whole order once again
    This can be controlled by using t code OVAH choosing message class the V4 message no 083 and change from warning to error
    Case2
    But to avoid the user to add material Y to the existing order say 10000 then i think we have to go for user exit
    Because the system doesnot even throw a warning message too in case 2 (according to my knowledge) and allows another line item to be added in the same order
    But you can test it if it throws any warning message we can try to convert that error
    But in case 2 it is not happening(even warning is not there)
    Regards
    Raja

  • How to reinstall Mountain Lion after Mavericks OS has been installed without using the time machine?

    Hi, I upgraded to Maverics a few weeks ago, and since than my computer has been very slow. It NEVER happened before. Now, I want to go back to Mountain Lion, but I didn't back up my computer with the time machine. I'd appreciate if anyone could tell me how to reinstall Mountain Lion again over Maverics? Thanks a lot for your help!

    You will need either a bootable flash drive with Mountain Lion to install, if you have one, or reinstall Snow Leopard if your computer can boot Snow Leopard. Or you can use Internet Recovery to reinstall the original version of OS X that came with the computer. In any event you will have to repartition and reformat the drive.
    Install Mavericks, Lion/Mountain Lion on a New HDD/SDD
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    1. Select Disk Utility from the main menu and click on the Continue button.
    2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • How to Re-open a Closed sales order on which delivery is booked & returned

    Dear All,
    The scenerio is as such a Sales Order has been made and based on it a delivery note is made. After sometime the user reliazes that the delivery note has been wrongly made and he reverses the delivery by making a Return entry. Now as the delivery has been made the corresponding sales order has been closed and as Return has been booked, delivery note is also closed.
    Now the user wants that he makes a new delivery based on the same sales order but how can this be achieved as the sales order is already closed or how can the sales order be cancelled now.
    If we make a new sales order then in mothly sales order report it would be seen that two sales order are there and total monthly sales order value would be wrong.
    What is the best way to handle such situations.
    Regards,
    Kawish

    I agree that this is ridiculous.
    I wish SAP was there when I needed to tell any customers about this....

  • How to restrict saving of a sales order without a material.

    Hi Gurus
    Please advice How to restrict saving of a sales order without a material. That is the system saves the order even if no item is assigned to it.

    Hi Raghu,
                 In standard SAP we can not do that. Even for some requirements of the customer this feature is required, specially in case of milestone billings, custom materials etc. client after saving the empty sales order they may create materials based on that sales order number.
                 If it is mandatary for u to save sales order only after the entry of the materials, u can try user exits or go for a code with the help of an ABAPer.
    Regards,
    Ravi Duggirala
    Edited by: ravi duggirala on Jun 20, 2008 11:11 AM

  • Trigger an Idoc when a sale order is been opened in VA02 & saved

    Hi Experts
         I have a requirement to trigger an Idoc when a sale order is been opened in VA02 transaction and saved.
    Now that I have attained the same through Message Control Settings and Nace out put type settings with Multiple Issuing.
    Here in the Idoc will be triggered when the user makes any changes in the order based on the NAST table entry.
    Now my requirement is that the Idoc has to be processed even if there is no changes made to the document when the user opens the sale order and clicks save.
    This is the process been carried out to re-process the Idoc.
    Now that the Idoc is triggered using the path ---> menu - extras -output - header- edit & save.
    Now that the user need to process the Idoc by just opening the order  in VA02 and  click save.
    How can this be attained ? is there any configuration for it ?
    Or is it possible to handle the same in any of the user exit ?
    the problem is the user exit save gets triggered only when there is any change in the document else it throws a msg " No changes made"

    Hi Niraj
       Thanks for your Response.
    Now that the output control works fine when there is any change made to the document.
    Now that i need to configure such a way that the output control triggers even if there is no change to the document and save   button is clicked.
    Can U please elaborate how do i make settings in VOFM-> Output Control ?
    Thanks
    Sathish

  • How to update  pricing in open sale order

    Hi all
    in open sale order suppose my basic price has been changed .how Can i update all open sales order basic price in one shot.

    Dear Sachin,
    Please follow the point as given below;
    1. In VTFL for your item category maintain pricing type as B if it is delivery related billing and if it is order related billing VTFA maintain pricing type as B and one more thing maintained Billing Quantity as C if you using VTFA and Billing Quantity as D if you using VTFL.
    2. Create the new condition records in VK11 for your new price ( Do not change the existing  condition record in VK12) with proper validity dates
    3. Use update button in billing the system will pick the new record by accessing VK11 in billing.
    Try this, it will work.
    Regards,
    Bharat B

  • How to change pricing Conditions in Sales order in change sales order bapi

    Hi Experts,
    How to change pricing Conditions in Sales order in change sales order bapi.
    I have used the 2 function modules bapi-changesalesorder and sd salesdocument change, But it is creating the new record , instead of changing the existing one, Could please assist regarding the same
    Thanks in Advance .
    NLN

    HI NLN
      I have just tried on my system and managed to overwrite the existing price by passing the following parameters.
      <b>Import Paramters:</b>
         SALESDOCUMENT - Sales Document Number
         ORDER_HEADER_INX - UPDATEFLAG as <b>'U'</b>.
         LOGIC_SWITCH - Import Structure - Pass 'X' to LOGIC_SWITCH-COND_HANDL.
      <b>Tables:</b>
         CONDITIONS_IN - ITM_NUMBER,
                         COND_COUNT, -> Condition counter same as KONV-ZAEHK generally it is <b>'01'</b>
                         COND_TYPE,
                         COND_VALUE,
                         CURRENCY.
         CONDITIONS_INX - ITM_NUMBER,
                          COND_COUNT,
                          COND_TYPE,
                          UPDATEFLAG as <b>'U'</b>,
                          CURRENCY.
       Hope i have clarified your query.
    Kind Regards
    Eswar

  • How to get Changed fields in Sales order to create a report

    Dear Gurus,
    How to get the log from sales order for the change of particular field.
    In my scenario, If an user remove the delivery block from sales order I want to capture the date on which this delivery block
    is removed and by whom (User)?
    I know that I can get the log of change but can I get in the form of field updates because further I want to use that date and user name to create a report.
    I hope u got my query. Please reply soon that I can create a report.
    Thanks in advance.
    regards,
    Sanjay

    Hi
    You can use the table CDPOS for tracking the changes at the Table level with the Sales order number
    or Else you can also use AUT10 transaction to track the logs/chanages with START DATE, END DATE and the Transaction code in your case it is VA02
    Please check and revert back
    regards,
    santosh

  • How to bring in the Open Sales Orders while performing Sales Order Conv

    Hi,
    Could you give some suggestions on the below:
    How to bring in the Open Sales Orders while performing Sales Order Conversion in R12.
    Thanks
    Pravin

    See http://ramugvs.wordpress.com/2011/08/27/how-to-stage-and-import-an-order-using-order-import-api-apps-wms-ebiz-11i-r12/
    Sandeep Gandhi

  • How to transfer cost from old sales order (cancelled) to new sales order

    Hi Gurus
    I want to know, how to move cost from one sales order to another sales order.
    SD created sales order before 1 month and there was production order behind this. Production was completed and all the cost was moved to sales order and also SD has raised invoice on customer. This transaction was completed.
    The above order was rejected by customer due to some changes in the order. SD raised another sales order and production order was created to to additional work. Production transfered above stock (produce before on old production order) to new production order.
    My problem is stock is now transfered to new production order but cost is still sitting on old sales order. How do I transfer cost from old sales order to new sales order. SD cancelled old invoice and raised new one with full value (old + new work) on new sales order. Now cost is on old sales order and revenue is on new sales order.
    Please help.
    Thanks

    Hi
    I have reverse the sales order settlement, PP order settlement to sales order and I have also done KB11N for transfering the cost to the new production order.
    The only problem is I was unable to transfer labour hour confirmation as cost element used for this are not for transfering cost. If I will reverse the confirmation in PP order system will reverse material movement also which I don't want any more. Can you please tell me how to I reverse the Labour hours with out affecting goods movement?
    Many thanks

  • How can I create a new sales order template

    Hello,
    how can I create a new sales order template in SAP CRM 7.0 (Web UI)? I want to use this sales order template in scenario ´'Mass Generation of Sales Orders via Marketing Projects'.
    Thanks for your support in advance.
    Best regards,
    anvan

    Hi,
    Did you set up this scenario? I want something similar, but I want an ERP order to be created. Do you know if that is possible? Do you have som tips?
    regards Camilla

  • How can I create a new sales order template in SAP CRM 7.0

    Hello,
    how can I create a new sales order template in SAP CRM 7.0 (Web UI)? I want to use this sales order template in scenario ´'Mass Generation of Sales Orders via Marketing Projects'.
    Thanks for your support in advance.
    Best regards,
    anvan

    Hi,
    Did you set up this scenario? I want something similar, but I want an ERP order to be created. Do you know if that is possible? Do you have som tips?
    regards Camilla

Maybe you are looking for