How to read a ftp file with a specified file name in Proxy-XI-File scenario

Dear all,
I have the following requirement:
The end user send a request via the proxy to XI, within the request parameters there is a file name, and the XI need to retrieve the file content from a ftp server with this specified file name, how can I achieve this?
According to my understanding, the file receiver adapter can only write the files to the server.
Thanks and regards,
Bean

Dear Bean,
This can be achieved using a BPM...
you will have to use Two parallel receive steps within a fork...
1. 1st receive step :This will bring the data from the proxy
2. 2nd receive step :according to pipeline step before this step would be executed interface determination would be called withini that you can put a mapping wherin the source and target message type would be as follows
a. source message type ; the file structure that is going to be picked from ftp structure
b.target message type : same structure as source except at top you will add "filename" field
(you cna find on forum how we can get a fielname in the mapping ..in case you dont knw )
3. now you can define correlation on the field "fielname" in both the receive steps provide the hirearchy and structure of data coming from both file and procy are same...
4.. after corelation you can put any steps like transformation ( as you want)
Hope this helps

Similar Messages

How to read an internal table with more than one (2 or 3) key field(s).

how to read an internal table with more than one (2 or 3) key field(s). in ecc 6.0 version

hi ,
check this..
report.
tables: marc,mard.
data: begin of itab occurs 0,
      matnr like marc-matnr,
      werks like marc-werks,
      pstat like marc-pstat,
      end of itab.
data: begin of itab1 occurs 0,
      matnr like mard-matnr,
      werks like mard-werks,
      lgort like mard-lgort,
      end of itab1.
parameters:p_matnr like marc-matnr.
select matnr
       werks
       pstat
       from marc
       into table itab
       where matnr = p_matnr.
sort itab by matnr werks.
select matnr
       werks
       lgort
       from mard
       into table itab1
       for all entries in itab
       where matnr = itab-matnr
       and werks = itab-werks.
sort itab1 by matnr werks.
loop at itab.
read table itab1 with key matnr = itab-matnr
                          werks = itab-werks.
endloop.
regards,
venkat.

How to read the 'Input help with fixed values' of domain .

How to read the 'Input help with fixed values' of domain .
The domain has a Value range i want to read those values .
Are these values stored in any table ?
Plz help me i need it ver badly...
Thanks in Advance...

Hi Chandra Shekhar,
To read the 'Input help with fixed values' of domain , you can use the function module : HR_P_GET_FIXED_VALUE_TEXT.
iIf you enter the domain name, you will find the fixed values entered in the domain.
These values are stored in a table DD07L(DD zero 7 L). Here the values are stored based on domain name.
See if it works for you.
Award points if its helpful.
Regards,
Bhanu

I take a .NEF file and a .JPG file with every click. When I transfer the files using a flash drive to another computer I never get all of the files to transfer. I get some of the .NEF and some of the .JPGs but not all

I take a .NEF file and a .JPG file with every click. When I transfer the files using a flash drive to another computer I never get all of the files to transfer. I get some of the .NEF and some of the .JPGs but not all. How come?

If you're exporting a project then you'll only get the images in that project. Also if any of the masters are referenced then you won't get those masters unless you check Consolidate masters into exported library
It might be best if you started from the beginning and explained what it is your are trying to do and how you're going about doing it. Also a description of you're hardware/software setup would be helpful.

Zip.ZipInputStream cannot extract files with Chinese chars in name

Dear friends,
Peace b upon u!
I am trying to read a zip file (~3000 files)containing one
or more files with Chinese, Japanese or Korean names, the
getNextEntry method throws an IllegalArgumentException as below after extracting just ~300 files as below:-
java.lang.IllegalArgumentException
        at java.util.zip.ZipInputStream.getUTF8String(Unknown Source)
        at java.util.zip.ZipInputStream.readLOC(Unknown Source)
        at java.util.zip.ZipInputStream.getNextEntry(Unknown Source)
        at testZipFiles.getZipFiles(testZipFiles.java:65)
        at testZipFiles.main(testZipFiles.java:18) issue:java.util.zip.ZipInputStream cannot extract files with Chinese chars in name
Category java:classes_util_jarzip
Plz let me know 1 of the ways which I can solve this issue.
1)if someone has JAVA DCOMPILER plz send the SOURCE Code
for the ZipInputStream.class to me..I need to edit it using 1 of the solutions as provided below which I googled.
2)If there is an alternate or upgraded java.util.zip.ZipInputStream or any org.apache.tools.zip.* package which can read such files..If yes where I can download the same on net.
3)Any other easier solution, which can let me extract all files (by excluding Chinese files thru CATCH) without the extractor process to fail altogether.
On net I found that the only solution with this is:-
- edit the new ZipEntry, remove the static initializer that calls
the native methods initIDs().
this step seems a bit scary, but it's according to the
workaround
to bug #4244499 (the workaround of Olive64, THU JUN 05
01:55 P.M. 2003),
that handles a similar bug at the ZipOutputStream.
Now you have a ZipInputStream that supports multi-bytes
entry names.
to extract the zip file, using the fixed code that is offered
above,
create a function that gets an "encoding" string, a "destPath"
string
and a "sourceFile" (zipped) and does :
ZipInputStream zipinputstream = null;
ZipEntry zipentry;
zipinputstream = new ZipInputStream(new FileInputStream
(sourceFile),encoding);
zipentry = zipinputstream.getNextEntry();
while (zipentry != null) { //for each entry to be extracted
    String entryName = zipentry.getName();
    int n;
    FileOutputStream fileoutputstream = new FileOutputStream
( destPath + entryName );
    while ((n = zipinputstream.read(buf, 0, 1024)) > -1)
        fileoutputstream.write(buf, 0, n);
    fileoutputstream.close();
    zipinputstream.closeEntry();
    zipentry = zipinputstream.getNextEntry();
}//while
zipinputstream.close();

Hi friend,
We'd better to ask one question in each thread. If you have another issue, you can consider to open up a new thread in this forum.
Now for the first question, do you mean this picture? It throws access exception in archive2.
If so , because your extractPath is a path, not a directory.You should add +"xxx.zip". For more information, please refer to
ZipFile.Open
Method (String, ZipArchiveMode).
For the second question, you can use the following code to skip the error message.
while (true)
try
//do something;
catch (Exception ex)
{ continue; }
Good day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Every time I am trying to open Quicktime files with my Quicktime it wants to convert the files. Why?

Every time I am trying to open Quicktime files with my Quicktime it wants to convert the files. Why?

QuickTime version 10.3 will "convert" older legacy codecs into a more modern version. You can save this newer version and delete the older one.
This can only mean that support for those codecs will be removed completely some time in the future.

Importing CD to Artist folder\Album folder\file with track number and name:

I have a problem then importing my cd’s to my harddisk using iTunes.
On my previous pc I got what I want, Artist folder, Album folder and file with track number and name:
e.g.
D:\My Music\B.B. King\Blues On The Bayou\01 Blues Boys Tune.mp3
D:\My Music\B.B. King\Blues On The Bayou\02 Bad Case Of Love.mp3
D:\My Music\B.B. King\Blues On The Bayou\03 I'll Survive.mp3
But now I get:
D:\My Music\Compilations\Blues On The Bayou\01 Blues Boys Tune.mp3
D:\My Music\ Compilations \02 Bad Case Of Love.mp3
D:\My Music\ Compilations \03 I'll Survive.mp3
In iTunes my settings are Edit -> Preferences -> Advanced: iTunes Music folder: D:\My Music and checkmark in both: “Keep iTunes Music folder organized” and “Copy files to iTunes Music folder when adding to library”.
My version of iTunes is 8.0.1.11
Thanks in advance
Peter

It will depend on the album. Gracenote considers anthologies, a collection of tracks by the same artist taken from different albums, as a compilation. In iTunes the compliation setting should really only be applied to a collection of tracks by different artists.
tt2

Is there any possibilty to integrate a EAR file with cq5 project??? the ear file is generated from a

Is there any possibilty to integrate a EAR file with cq5 project??? the ear file is generated from a WSDL..

Is there a reason why you need an "ear" file ? So what is the task you want to fullfill.
For me it sounds like you want to integrate a jax-ws service inside a cq5 project. To achive that you have to integrate a jax-rs client in cq5.
One option to achive that is to integrate Apache CXF like documented here:
http://www.pro-vision.de/adaptto/downloads/110915_adaptto_sling_cxf.pdf
Samplecode can be found here:
http://www.pro-vision.de/adaptto/downloads/110915_adaptto_sling_cxf_sampleproject.zip
Best regards,
Dominik

What's the reason for this message, "A server with the specified host name could not be found" ? I'm using iPhone 4s, 16gB, iOS 7.0.4

I get a pop-up message saying "A server with the specified host name could not be found", whenever I try to access any streaming websites/apps or even WhatApp over Wi-Fi and I cannot access the specific THING for that moment, and I've tried switching Wi-Fi On and Off both in my Phone and also in the Router. I got an internet connection and a Wi-Fi router just before two days, and it's happening since. I got the internet speed around 80kbps and i can easily stream YouTube videos except sometimes, I receive that annoying message. I can't even browse the internet in Safari, which says "No Internet Connection"(Even though the Wi-Fi is connected), and I can access it after somewhile (say 10 minutes, it'll be perfectly alright). I use iPhone 4s. And everything about the internet connection is totally fine in my Computer, but not in my iPhone, as I've explained the issues, above. If there are any technical settings that I should change/modify, either on my computer(Windows 7 OS) or in my iPhone(iOS 7.0.4), PLEASE let me know
I hope I've provided enough information for the reader to understand my point. (I apologize for my verbal mistakes, if there are )
THANKS

Hello Paneesh,
Thank you for the details of the issue you are experiencing with Wi-Fi on your iPhone 4s. I recommend the following steps:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
If the issue is still unresolved Wi-Fi disconnects or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
You can find the full article here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for using Apple Support Communities.
Best,
Sheila M.

Can someone please help me!! I keep trying to download itunes but get a message that and error has happened 2/3 and check window activity. Then it shows A sever with the specified host name could not-- and then it cuts off the rest of the message.

I keep trying to download itunes in Safari but get a message that and error has happened 2/3 and check window> activity. Then it shows A sever with the specified host name could not…… and then it cuts off the rest of the message. I have reset Safari and still nothing!!!
Very frustrated!!!

It's downloading with Firefox 3.6.27 as I write. It's probably more a Safari problem in your case for which people on the Safari forum could provide suggestions. Or mybe just try again in a while as I suspect everybody is downloading right now.

How to send multiple files with it's original name over HTTPS using one CC?

I am working on a File to HTTPs scenario. It is in production and working fine. Currently we send only one file and I have hard coded the name in the communication channel in the header fields. Now we have to send more files with different names and I want to use only one receiver channel instead of many. We need to send the files with their original names.
I used the ASMA in the sender File Adapter and I see the FileName in the dynamic configuration under http://sap.com/xi/XI/System/File name="FileName".
I know we can use a UDF in message mapping and get the value and put it in HEADERFIELDONE. But we don't want to use mapping as the files are huge and we don't want to insert XML tags in the payload.
So how do I put the Filename from the DynamicConfiguration to the HTTP header field as FileName without using mapping? Are there any settings?
Can I put something in the PROLOG or can I use any other module in the File Sender Adapter or is there any other option?
Any help is appreciated.
Thanks
Sai

See my blog:
/people/stefan.grube/blog/2009/06/19/unknown-use-case-of-dynamicconfigurationbean-store-file-name-to-jms-header-without-mapping
You have to put the configuration in sender channel, as HTTP adapter does not allow modules.
For the second module, put values related to HTTP adapter.

I cannot open a pdf file with aole-mail. I can open pdf files from windows explorer. I have associated pdf with adobe reader. My operating system is window

I cannot open a pdf file with aol e-mail. I went to preferences in Adobe Reader but did not know what to enter for Incoming IMAP and outgoing SMTP. I can open pdf files from windows explorer as I have associated .pdf files with adobe reader. My operating system is windows 7.
When I try to open the pdf file within aol e-mail I get a message: 'Your security settings do not allow this file to be downloaded'. I have not changed my security settings (Tools, Internet Options, security).

Or http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

How to load a file with out specifying its absolute location

Hi,
I'm having some config files in a specific location. I'm setting that folder path to the CLASSPATH and trying access those file just by giving its name.
For eg: contents are in e:\config folder
I set e:\config to CLASSPATH
and trying to load the file which is in the above said folder.
using getResourceAsStream(filename).
The above approach is working in certain cases, but not working when i try to do in a class which under a big package structure.
Can someone help me out, the reason for this unexpected behaviour.
Please do suggest me, if u know some work-around for this problem.
Thnaks in advance,
Chandrasekhar

Hi,
Thank you. I tried by adding a forward slash, it started working.
But I still have one doubt, when the program is within the package structure, then we have to give forward slash, where as if the program doesn't have any pkg structure we have to give only the file name without prefixing the slash.
Any idea, why is it so ??
Is it bcz, that getOutputAsStream() will prepend the package names, if forward slash is not given. Even if this is true, why providing a forward slash in a program with no packages doesn't work ?

How to read in date/time with ascii import

I have an ascii data file with a time column in the following format
ddd hh:nn:ss
the seconds are like 11.1234567, so it would look like
234 12:23:11.1234567
I have tried different format options to read this in
with no luck. The data I read in I am then using in CLIP/Insight. The video has this time on it and I need it in the data set to be able to sync them up.

The problem with this data format seems to be the 'ddd' at the beginning of the data format.
DIAdem expexts the 'dd' to be a day of a month, not a day in a year. I can offer you a solution though:
Please upload or send me two of your data files and we will create a little script in DIAdem that will import your data format and make it available in DIAdem and DIAdem CLIP.
You can upload them here in the forum or send them to me at:
[email protected]
Please compress the files (with ZIP or similar technology) if they are large.
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

How to read a C structure with string and int with a java server using sock

I ve made a C agent returning some information and I want to get them with my java server. I ve settled communication with connected socket but I m only able to read strings.
I want to know how can I read strings and int with the same stream because they are sent at the same time:
C pgm sent structure :
char* chaine1;
char* chaine2;
int nb1;
int nb2;
I want to read this with my java stream I know readline methode to get the first two string but after two readline how should I do to get the two int values ?
Any idea would be a good help...
thanks.
Nicolas (France)

Does the server sent the ints in little endian or big endian format?
The class java.io.DataInputStream (with the method readInt()) can be used to read ints as binary from the stream - see if you can use it.

How to read a ftp file with a specified file name in Proxy-XI-File scenario

Similar Messages

Maybe you are looking for