How to read an ascii file and record data in a 2d array

HI everyone,
I have an experimental data file in ascii format. It contains 10 data sets.
I'm trying to read the ascii file and record data in a 2d array for further analysis,
but I still could not figure it out how to do it.
Please help me to get this done.
Here I have attaced the ascii file.
-Sam
Attachments:
data.asc ‏123 KB
2015-01-27_18-01-31_fourier_A2-F-abs.zip ‏728 KB

Got it!
Thank you very much !
-Pamsath

Similar Messages

How to read a CSV file and Insert data into an Oracle Table

Hi All,
I have a Clob file as a in parameter in my PROC. . File is comma separated.need procedure that would parse this CLOB variable and populate in oracle table .
Please let me some suggestions on this.
Thanks,
Chandra R

jeneesh wrote:
And, please don't "hijack" 5 year old thread..Better start a new one..I've just split it off to a thread of it's own. ;)
@OP,
I have a Clob file as a in parameter in my PROC. . File is comma separated.need procedure that would parse this CLOB variable and populate in oracle table .You don't have a "clob file" as there's no such thing. CLOB is a datatype for storing large character based objects. A file is something on the operating system's filesystem.
So, why have you stored comma seperated data in a CLOB?
Where did this data come from? If it came from a file, why didn't you use SQL*Loader or, even better, External Tables to read and parse the data into structured format when populating the database with it?
If you really do have to parse a CLOB of data to pull out the comma seperated values, then you're going to have to write something yourself to do that, reading "lines" by looking for the newline character(s), and then breaking up the "lines" into the component data by looking for commas within it, using normal string functions such as INSTR and SUBSTR or, if necessary, REGEXP_INSTR and REGEXP_SUBSTR. If you have string data that contains commas but uses double quotes around the string, then you'll also have the added complexity of ignoring commas within such string data.
Like I say... it's much easier with SQL*Loader of External Tables as these are designed to parse such CSV type data.

How To read lib*.so files and verbose its content

Hi
Is there any command with which we can read shared library files and see whats its contents are i.e. whats are the functions available inside it and how its control flow.
Regards
Jeet

I know of none that shows flow control but you can do a man against nm(1) to see what is in the library (nm libc.so.1).

How to Read from two file and write to another file --Please help !!

Hi all,
Please suggest me where i'm goin goin wrng.
I have 2 flat files. one of them is the main file(Ann.dat) has a about 150,000 lines (each line has unique ID from 00001 to 45000) of data and the the other(Miss.dat) has a just a list of IDs that are no longer in use & have to be deleted from the first file(NewAnn.dat). (Note that Ann.dat is a tab delimitted file and Miss.dat is just a list of all invalid IDs)
Below is my code. It doesn't do what I'm supposed to. Please suggest me or help me with a code to do it. What I'm trying to do is read each of the lines from the 2 files compare the ID in ann.dat with all the IDs in Miss.dat & if it doesn't match with the ID in Miss.dat write the whole line to NewAnn.dat. And do the rest with all the lines in Ann.dat.
It could be a real dumb question. since i'm not a software professional, I consider myself to be newbie to programming. I desperately need your help.
import java.io.*;
import java.util.*;
public class anntemp{
     public static void main(String[] args)
          String keyAnn ="";
          String keyMis="";
          String recAnn =null;
          String recMis =null;
          try{
          FileReader fr=new FileReader("C:\\Tom\\Ann.dat");
          BufferedReader br=new BufferedReader(fr);
          int couter=0;
          while ((recAnn = br.readLine())!=null)
               couter++;
               keyAnn = recAnn.substring(0, recAnn.indexOf("\t"));
          FileReader fr1=new FileReader("C:\\Tom\\Miss.dat");
          BufferedReader br1=new BufferedReader(fr1);
          while((recMis = br1.readLine())!=null){
          keyMis = recMis.substring(0, recMis.indexOf("\t"));
               if(keyAnn.equals(keyMis)){
     FileWriter fw=new FileWriter("C:\\Tom\\NewAnn.dat",true);
     BufferedWriter bw=new BufferedWriter(fw);
     PrintWriter pw=new PrintWriter(bw);
     StringBuffer writeValue = new StringBuffer();
     writeValue.append(recAnn);
                                             pw.println(writeValue.toString());
     pw.flush();
          }catch (Exception expe){
               System.out.println("In Exception ");
               expe.printStackTrace();
Thank you all in advance,
br

I think you need to close the files when you are done in the inner loop. Plus I think you'll be overwritting the file in the inner loop if more than one match. It might be easier to read the unused id file into a map at the start, and then loop up the id's from the master file in the map. You can put the unused id's in as the keys, and a Boolean.TRUE as the value (value won't matter). Then just check if the map contains the key for the id read from the master file. That should cut down on disk activity. This assumes the unused id file is smallish.

How to read from excel file and write it using implicit jsp out object

our code is as below:Please give us proper solution.
we are reading from Excel file and writing in dynamicaly generated Excel file.it is writing but not as original excel sheet.we are using response.setContentType and response.setHeader for generating pop up for saveing the original file in to dynamically generated Excel file.
<%@ page contentType="application/vnd.ms-excel" %>
<%
     //String dLoadFile = (String)request.getParameter("jspname1");
     String dLoadFile = "c:/purge_trns_nav.xls" ;
     File f = new File(dLoadFile);
     //set the content type(can be excel/word/powerpoint etc..)
     response.setContentType ("application/msexcel");
     //get the file name
     String name = f.getName().substring(f.getName().lastIndexOf("/") + 1,f.getName().length());
     //set the header and also the Name by which user will be prompted to save
     response.setHeader ("Content-Disposition", "attachment;     filename="+name);
     //OPen an input stream to the file and post the file contents thru the
     //servlet output stream to the client m/c
          FileInputStream in = new FileInputStream(f);
          //ServletOutputStream outs = response.getOutputStream();
          int bit = 10;
          int i = 0;
          try {
                    while (bit >= 0) {
                    bit = in.read();
                    out.write(bit) ;
} catch (IOException ioe) { ioe.printStackTrace(System.out); }
          out.flush();
out.close();
in.close();
%>

If you want to copy files as fast as possible, without processing them (as the DOS "copy" or the Unix "cp" command), you can try the java.nio.channels package.
import java.nio.*;
import java.nio.channels.*;
import java.io.*;
import java.util.*;
import java.text.*;
class Kopy {
     * @param args [0] = source filename
     *        args [1] = destination filename
    public static void main(String[] args) throws Exception {
        if (args.length != 2) {
            System.err.println ("Syntax: java -cp . Kopy source destination");
            System.exit(1);
        File in = new File(args[0]);
        long fileLength = in.length();
        long t = System.currentTimeMillis();
        FileInputStream fis = new FileInputStream (in);
        FileOutputStream fos = new FileOutputStream (args[1]);
        FileChannel fci = fis.getChannel();
        FileChannel fco = fos.getChannel();
        fco.transferFrom(fci, 0, fileLength);
        fis.close();
        fos.close();
        t = System.currentTimeMillis() - t;
        NumberFormat nf = new DecimalFormat("#,##0.00");
        System.out.print (nf.format(fileLength/1024.0) + "kB copied");
        if (t > 0) {
            System.out.println (" in " + t + "ms: " + nf.format(fileLength / 1.024 / t) + " kB/s");
}

Read an excel file and convert to a 1-D array of long, 32-bit integer?

My vi right now reads an column of numbers as a 1-D array, but I need to input the numbers manually, and for what I'm trying to do, there could be anywhere between 100 to 500 numbers to input. I want the vi to be able to read the excel file and use that column of numbers for the rest, which the data type is long (32-bit integer).
I have an example vi that is able to get excel values, but the output data type is double (64-bit real).
I need to either be able to convert double(64-bit real) data to long (32-bit integer), or find another way to get the values from the excel file.

Just to expand on what GerdW is saying. There are many programs that hold exclusive access to a file. So if a file is opened in Excel, the LabVIEW cannot access the file.
What is the exact error code? Different error codes will point to different issues.
Make sure the csv file is exactly where you think it is and LabVIEW is pointing to the right place. (I'm just going through stupid things I have done)
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to Read the "text file and csv file" through powershell Scripts

Hi All
i need to add a multiple users in a particular Group through powershell Script how to read the text and CSV files in powershell
am completly new to Powershell scripts any one pls respond ASAP.with step by step process pls
Regards:
Rajeshreddy.k

Hi Rajeshreddy.k,
To add multiple users to one group, I wouldn't use a .csv file since the only value you need from a list is the users to be added.
To start create a list of users that should be added to the group, import this list in a variable called $users, the group distinguishedName in a variable called $Group and simply call the ActiveDirectory cmdlet Add-GroupMember.
$Users = Get-Content -Path 'C:\ListOfUsernames.txt'
$Group = 'CN=MyGroup,OU=MyOrg,DC=domain,DC=lcl'
Add-ADGroupMember -Identity $Group -Members $Users

How to read a text file and write text file

Hello,
I have a text file A look like this:
0 0
0 A B C
1 B C D
2 D G G
10
1 A R T
2 T Y U
3 G H J
4 T H K
20
1 G H J
2 G H J
I want to always get rid of last letter and select only the first and last line and save it to another text file B. The output should like this
0 A B
2 D G
1 A R
4 T H
1 G H
2 G H
I know how to read and write a text file, but how can I select the text when I am reading a text file. Can anyone give me an example?
Thank you

If the text file A look like that
0 0
0 3479563,41166 6756595,64723 78,31 1,#QNAN
1 3479515,89803 6756588,20824 77,81 1,#QNAN
2 3479502,91618 6756582,6984 77,94 1,#QNAN
3 3479516,16334 6756507,11687 84,94 1,#QNAN
4 3479519,14188 6756498,54413 85,67 1,#QNAN
5 3479525,61721 6756493,89255 86,02 1,#QNAN
6 3479649,5546 6756453,21824 89,57 1,#QNAN
1 0
0 3478762,36013 6755006,54907 54,8 1,#QNAN
1 3478756,19538 6755078,16787 53,63 1,#QNAN
2 0
3 0
N 0
I want to read the line that before and after 1 0, 2 0, ...N 0 line to arraylist. I have programed the following code
public ArrayList<String>save2;
public BufferedWriter bufwriter;
File writefile;
String filepath, filecontent, read;
String readStr = "" ;
String[]temp = null;
public String readfile(String path) {
int i = 0;
ArrayList<String> save = new ArrayList <String>();
try {
filepath = "D:\\thesis\\Material\\data\\CriticalNetwork\\test3.txt";
File file = new File(filepath);
FileReader fileread = new FileReader(file);
BufferedReader bufread = new BufferedReader(fileread);
this.read = null;
// read text file and save each line content to arraylist
while ((read = bufread.readLine()) != null ) {
save.add(read);
// split each arraylist[i] element by space and save it to String[]
for(i=0; i< save.size();i++){
this.temp = save.get(i).split(" ") ;
// if String[] contain N 0 such as 0 0, 1 0, 2 0 then save its previous and next line from save arraylist to save2 arraylist
if (temp.equals(i+"0")){
this.save2.add(save.get(i));
System.out.println(save2.get(i));
} catch (Exception d) {
System.out.println(d.getMessage());
return readStr;
My code has something wrong. It always printout null. Can anyone help me?
Best Regards,
Zhang

How to read from one file and write into another file?

Hi,
I am trying to read a File and write into another file.This is the code that i am using.But what happens is last line is only getting written..How to resolve this.the code is as follows,
public String get() {
     FileReader fr;
     try {
          fr = new FileReader(f);
          String str;
          BufferedReader br = new BufferedReader(fr);
          try {
               while((str= br.readLine())!=null){
               generate=str;
          } catch (IOException e1) {
               e1.printStackTrace();
          } }catch (FileNotFoundException e) {
               e.printStackTrace();
     return generate;
where generate is a string declared globally.
how to go about it?
Thanks for your reply in advance

If you want to copy files as fast as possible, without processing them (as the DOS "copy" or the Unix "cp" command), you can try the java.nio.channels package.
import java.nio.*;
import java.nio.channels.*;
import java.io.*;
import java.util.*;
import java.text.*;
class Kopy {
     * @param args [0] = source filename
     *        args [1] = destination filename
    public static void main(String[] args) throws Exception {
        if (args.length != 2) {
            System.err.println ("Syntax: java -cp . Kopy source destination");
            System.exit(1);
        File in = new File(args[0]);
        long fileLength = in.length();
        long t = System.currentTimeMillis();
        FileInputStream fis = new FileInputStream (in);
        FileOutputStream fos = new FileOutputStream (args[1]);
        FileChannel fci = fis.getChannel();
        FileChannel fco = fos.getChannel();
        fco.transferFrom(fci, 0, fileLength);
        fis.close();
        fos.close();
        t = System.currentTimeMillis() - t;
        NumberFormat nf = new DecimalFormat("#,##0.00");
        System.out.print (nf.format(fileLength/1024.0) + "kB copied");
        if (t > 0) {
            System.out.println (" in " + t + "ms: " + nf.format(fileLength / 1.024 / t) + " kB/s");
}

How to read in a file and change the column attributes

Hi,
I'm new to java and i'm stuggling to find a way to read in a text file and perform calculations on the data, such as to normalise it.
What in want to do is normalise the data by finding the greatest value in a column and then divide all the other values in the column with that value.
I know how to read a file in and store each line in a vector but for this problem i think i need to store each column in an array, but i'm not sure how to do this.
Can anyone help please?
Thanks

Hi,
I'm new to java and i'm stuggling to find a way to
read in a text file and perform calculations on the
data, such as to normalise it.
What in want to do is normalise the data by finding
the greatest value in a column and then divide all
the other values in the column with that value.
I know how to read a file in and store each line in a
vector but for this problem i think i need to store
each column in an array, but i'm not sure how to do
this.
Can anyone help please?
ThanksI think this should work but I wrote it out without completely thinking about it (hopefully to get things started).
So if you had this:
age height earnings
0 2 100
1 3 50
2 1 0
For the age column you'd take 2 as the largest and then divide 0 and 1 by two to get 0, .5.
First build up test files that seperate the columns in different ways. With spaces, tabs, and the ASCI Control character for null ( I think it's 0 ). Your program should detect
numbers and spaces, tabs control character, commas and periods (for money). Because numbers don't have spaces it should be easy to keep track of which column
you're in.
Store each line into a 3D String array with each index containing a String built up from the chars scanned in on each line, when a blank area is found followed by another
number iterate the column index. When you come to the end of the line set column == 0 and row+1.
private String[][][] test = new String[2][6][1];
20     3      11      14      44       0
4      5       7      80      91      49
test[0][0][0] would be row 1 col 1 value 1 ((20))
test[0][1][0] would be r1, c2, v1 ((3))
test[1][0][0] would be r2, c1, v1 ((4))
test[1][2][0] would be r2, c3, v1 ((7))
test[1][5][0] would be r2, c6, v1 ((49))
package source.Final;
import javax.swing.*;
import java.io.*;
public class S7
     public static void main(String[] args)
          getContents();
          System.exit(0);
     public static void getContents()
          String lineSep = System.getProperty("line.separator");
          char c = ' ';
          int iterator = 0;
          int i = 0;
          int charNum = 1;
          int lineCount = 1;
         //declared here only to make visible to finally clause
         BufferedReader input = null;
         BufferedWriter out = null;
         try {
                     String line = null;
                      * This implementation reads / writes one line at a time
                      * using the buffered reader / writer Java classes.
                     input = new BufferedReader( new FileReader( "C:\\Scan file test\\Read\\test1.txt" ));
                       out = new BufferedWriter( new FileWriter( "C:\\Scan file test\\Read\\test2.txt" ));
                     //input = new BufferedReader( new FileReader( "C:\\Scan file test\\Read\\booked_policies1.txt" ));
                       //out = new BufferedWriter( new FileWriter( "C:\\Scan file test\\Write\\booked_policies1.txt" ));
                     //input = new BufferedReader( new FileReader( "C:\\Scan file test\\Read\\booked_policies2.txt" ));
                       //out = new BufferedWriter( new FileWriter( "C:\\Scan file test\\Write\\booked_policies2.txt" ));
                     //input = new BufferedReader( new FileReader( "C:\\Scan file test\\Read\\booked_policies3.txt" ));
                       //out = new BufferedWriter( new FileWriter( "C:\\Scan file test\\Write\\booked_policies3.txt" ));
                     out.write( "Character\tLine Number\tCharacter Number\tAscii Value" + lineSep );
                          while (( line = input.readLine()) != null)
                          i = 0;
                          charNum = 1;
                          iterator = 0;
                          while( i < line.length() )
                                           c = line.charAt(iterator);
                                        if( (int)c == 0 || (int)c == 9 )
                                             break;
                                        else if( c >= '[' && c <= '_')
                                             {out.write( "["+c+"]\t\t"+"["+lineCount+"]\t\t"+"["+charNum+"]\t\t\t"+"["+(int)(c)+"]"+lineSep );}
                                        else if( c < ' ' )// && (int)c != 0 && (int)c != 9 )
                                             {out.write( "["+c+"]\t\t"+"["+lineCount+"]\t\t"+"["+charNum+"]\t\t\t"+"["+(int)(c)+"]"+lineSep );}
                                        else if( c > ';' && c <= '@' && c != '=')
                                             {out.write( "["+c+"]\t\t"+"["+lineCount+"]\t\t"+"["+charNum+"]\t\t\t"+"["+(int)(c)+"]"+lineSep );}
                                        else if( c >= '!' && c < '"' )
                                             {out.write( "["+c+"]\t\t"+"["+lineCount+"]\t\t"+"["+charNum+"]\t\t\t"+"["+(int)(c)+"]"+lineSep );}
                                        else if( c > 'z' && c < '~' )
                                             {out.write( "["+c+"]\t\t"+"["+lineCount+"]\t\t"+"["+charNum+"]\t\t\t"+"["+(int)(c)+"]"+lineSep );}
                                        else if( c == '%' )
                                             {out.write( "["+c+"]\t\t"+"["+lineCount+"]\t\t"+"["+charNum+"]\t\t\t"+"["+(int)(c)+"]"+lineSep );}
                                        else if( c > '~' )
                                             {out.write( "["+c+"]\t\t"+"["+lineCount+"]\t\t"+"["+charNum+"]\t\t\t"+"["+(int)(c)+"]"+lineSep );}
                                        charNum += 1;
                                           iterator += 1;
                                           i++;
                                lineCount += 1;
         catch (FileNotFoundException ex) {ex.printStackTrace();     System.out.println("File not found.");}
             catch (IOException ex){ex.printStackTrace();               System.out.println("IO Error.");}
         finally{ try{ if( input != null ) input.close();                if( out != null ) out.close();}
                catch (IOException ex){ex.printStackTrace();        System.out.println("IO Error #2.");}
    }

How to read an html file and replace a text using text_io

hi,
i want ro read an html file using text_io and replace a particular text with a new text
eg: i want to replace a text called "data.js" and with "maps.js"
how do i do this?

You have to write your own code to do that. TEXT_IO is just a low level text file interface.
You need to read in all the text, save it in some internal format (array of varchar2's maybe or in the DB) and then perform a search on the text you have read in, find out where the instances of "data.js" are located and substitute them with "maps.js" After that you need to write to a new file and delete the old one. There is no way to search and replace inside the existing file (what's sometimes referred to as 'in-place' substitution).
See the help section called About the TEXT_IO package for an overview of how it works and some code examples.

How to read a txt file and update DB table

I have to read a table which has some entries in it as plain text file, then I should update my table if the table entries and the data in text file are NOT MATCHING o.w. keep the table entry as it is

It will helps to u
data : begin of t_temp occurs 0,
         text(256),
       end of t_temp.
data : s_file type string.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-S01.
PARAMETER: P_FILE LIKE RLGRAP-FILENAME.
SELECTION-SCREEN : END OF BLOCK B1.
clear s_file.
move p_file to s_file.
uploade SOURCE file to t_tab1
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = s_file
    FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = 'X'
         HEADER_LENGTH                 = 0
         READ_BY_LINE                  = 'X'
         DAT_MODE                      = ' '
         CODEPAGE                      = ' '
         IGNORE_CERR                   = ABAP_TRUE
         REPLACEMENT                   = '#'
         CHECK_BOM                     = ' '
       IMPORTING
         FILELENGTH                    =
         HEADER                        =
TABLES
    DATA_TAB                      = t_temp
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Text deleted by Moderator. Do NOT request points
Regards
Saimedha

How to read the source file and copy the entire content to the target Database field

Hi All,
PI system extracts the actual business content from the incoming attachment file and copy the entire format to the target Database field which is a blob data type field.
Sender Adapter: SOAP
Receiver Adapter: JDBC
JDBC Structure
Can we achived the above requirement by using UDF with out Java Mapping?
Thanks,
Mahi.

Ok, in this case yo can use the conten converion of the file adapter. Therefore you first need to create a Datatype in ESR with the required structure
Then in your file adapter you need to use this datatype and its required fields:
The Datatype then can be used as usual within you mapping.
regards
Christian

Read from txt file and analyse data

hi,
i am having a problem for reading data from a text file and checking whether it is a integer or not.
basically if i have a txt file with the following content:
12 45 345 500 45.67684 33
my output should be:
12 45 345 500 invalid 33
that means if there is a integer number in the file, the integer number will be printed on the screen BUT if there is anything else like a string or a double number, then "invalid" will be printed.
how can i check what kind of datatype it is??
i have the following code to start with:
try
            BufferedReader in = new BufferedReader(new FileReader(FileName));
            String l = in.readLine();
            in.close();
        catch(IOException e)
            System.out.println("IO error");
            System.exit(0);
        }

ok i have tried the following code:
        int index = 0;
        String[] arr = null;
        int nb = 0;
        try
            BufferedReader in = new BufferedReader(new FileReader(nameFile));
            String line = in.readLine();
            arr = line.split(" ");
            for(int i=0; i<arr.length; i++)
                index = i;
                nb = Integer.parseInt(arr);
System.out.print(nb+" ");
in.close();
catch(IOException e)
System.out.println("IO error");
System.exit(0);
catch(NumberFormatException e)
System.out.print("invalid ");
for(int j=index+1; j<arr.length; j++)
nb = Integer.parseInt(arr[j]);
System.out.print(nb+" ");
which works perfectly fine for the following scenario:
txt-file:
12 45 345 500 45.67684 33
output:
12 45 345 500 invalid 33
but what, if I have the following data in my txt file:
12 45 345 500 45.67684 33 23.234 21
then the output should be:
12 45 345 500 invalid 33 invalid 21
how can i solve this???

Read from .txt file and output the content as two arrays

I am using the contoured move to control the x-y stage. The trajectory datas for x and y axis are generated using my interpolation program and it is stored in a .txt file as two columns. What I want to do is read .txt file and output the content of this file as two arrays. Is there anyone has any ideas? Thanks, the .txt file is attached.
Attachments:
R.75.txt ‏172 KB

Hi Awen,
This is quite easy to do, you can merely use the "read from spreadsheet file" function to get a 2D array (2 columns and n rows) and then use the index array function to get whatever row/colums you want..
Hope the attached VI helps you
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"
Attachments:
read sprdsheet file.vi ‏27 KB

How to read an ascii file and record data in a 2d array

Similar Messages

Maybe you are looking for