Item Group not Uploaded

Dear Experts,
When i trying to upload Item Master in Simple way through Import from Excel it's give me Error Invalid Code But its very simple Transaction. I taken only these field to upload the Data.  Item No.     Item Description     Item Type     Item Group     Purchasing UoM     Sales UoM     Inventory UoM. Its give me  Error " Invalid Record related to ItemGroup.
Please suggest me.
Regards
Amol

Hi
I hope u have not create ItemGroup
Go in Administrator > Inventory > Item Group add some item group and assign GL
When u import  fiel please check Item Group code is valid/match with SAP item Group
Please let me know if u hv problem again
Thanks
Kevin

Similar Messages

  • Alternative Item group not appearing CS11

    Hi all,
    We have created BOM with all the substitution materials which can be used at the time of Production.
    We have utilised the Alternative item group for this. When i look at BOM for a material say X using CS03 i can see the Alternative Item group. But when i explode the BOM using CS11 i cannot see the alternative item group in it.
    The scenario in details is :
    For the header material X i have X1,as component with different change numbers and unique validity dates and  this component is seen in 3 lines in BOM with alternative item groups against it.
    Now when i explode the BOM using CS11 i can see X1 component with alternative group for only 2 line items.
    We are in ECC6.0 version, can i ask you whether there is any patch or oss note to be applied.I have tried searching OSS notes but couldnt find them
    Please advice as this is of very high importance.
    Thanking you
    Regards
    Raj Kiran

    Dear Raj,
    What I wanted to confirm from you is ,after executing CS11--->
    Changing Layout -
    > Selecting Alternative Item group,
    priority,Usage probablitity,the values are not shown in the field
    properly though they are actually present in the BOM?
    So enter the proper valid from dates in CS11(Select the date
    on which the alternative item group is active) & also alternative
    BOM number properly.
    So go ahead as I suggested and even after entering the proper
    valid from dates,Alt.BOM---changing layout ,if its not giving
    proper results,then go for checking OSS notes.
    This is with respect to ECC 6.0.
    Check & revert back.
    Regards
    Mangal

  • Commitment item group not displayed as level node when generate report FM

    Hi all,
    We created commitment item group or funds centre group through tcode i.e FM_SETS_FIPEX1. We create group with lower node such as hierarchy.
    However when we generate the standard report with the commitment item group or funds centre group, we find no hierarchies as commitment item/funds centre group figure. Just flat, no hierarchies, no level node.
    How to make it displayed as commitment item/fundcentre group ?
    It maintained on drilldown report or something else?
    Dewi

    Dewi,
    For report painter reports you can create groups using transaction FMRP_CI_SET_HIER - Create Group Hierarchy from Master Data Hierarchy or create sets using GS01, with them you can view the reports with the master data hierarchy.
    Regards
    César

  • Internal orders - Plan Line items are not uploading into SAP!!

    Hi Experts,
    Am uploading the budget values as plan line items of Internal orders(AUFK table) from my Z prog. by using BAPI_COSTACTPLN_POSTPRIMCOST.......in Return table(bapiret2), am not getting any error messages........so, am taking it for granted that, upload is successful.
    But, when I went to KOBP transaction.........I did not see any values for the internal order in question.......but, just now, I uploaded successfullly!!
    Let me know that, Why its happening like that? How to fix it?
    replies appreciated, thanq.

    I've lil doubt if this BAPI really update the internal orders in KOBP transaction.
    However just refer:
    bapi_costactpln_postprimcost
    Use BAPI_COSTACTPLN_POSTPRIMCOST
    And refer relevant OSS which is mentioned in Above threads.

  • In system settings 15 item are not accessible, get the message: cannot open it, is not possible on intel based MAC. Items like security, i cloud user and groups network and more

    in system settings 15 item are not accessible, get the message: cannot open it, is not possible on intel based MAC. Items like security, iCloud user and groups network and more.
    Genius bar told me to erase the harddisk and install OSX Maverick again. This has not changed the problems with the system settings

    You need to Repartition the drive as One partition which will erase all data from it and then reinstall OS X. then with the initial setup system you chose the language on the first screen that comes up. That sets the language for the whole system.
    There is no other way of completely removing certain information created by a previous owner. this hold strue whether you are selling or give a Mac to someone.
    To do the repartitioning you need to use the Online Internet Recovery system, if the Mac came with Lion 10.7 or above, or from the original system reinstall discs that came with it when it was new.

  • Copy Express Item Groups Transaction revenue Account not Found

    Currently using Copy Express.
    1.  Have successfully loaded COA
    2. Manually entered G/L account determinaition and tax codes
    3. Error below is occuring when trying to Copy Item Groups and Warehouses.  The items groups and Warehosues are failing.
    Transaction created by document was not found, 'Revenue account'.
    NOTE: the accounts determined for each item group in the source database all exist in the target database.
    Can any please assist in explaining why this is happening and how I could prevent this from occuring without having to mannually create warehosues and items?
    Thanks Very much
    Lisa

    Hi Lisa,
    I have a suggestion.
    The Revenue account in question may be problematic.                                                                               
    Can you try to change to another revenue account in your source db, and try to copy warehouse to target DB?                                                                               
    1.goto source db,and search for the specific warehouse and change the         
      revenue account to another account
    2.and copy warehouse to target db 
    Hope this will be helpful.
    Kind regards,
    Willy

  • Item category group not exist in CRM

    Hi all,
    I u2018m getting an error item category group not exist in CRM that item category group is in R/3
    So my question is weather I have to create that item category group in CRM or I have to download that one from r/3.
    If I create in CRM how to link the R/3 item category group to CRM one.
    Regards
    Rami

    There is definitely no exchange of neither transaction types nor item categories between an erp and a crm system. Also the dependent object like the organisational data profile or the partner profile are not exchanged.
    Instead for those transactions that are exchanged you need to do the customizing the same way in both systems, ERP and CRM.
    Regards, Kai

  • The following items have not been completely assigned to shipping group

    I am getting the below error:
    "The following items have not been completely assigned to shipping groups."
    We are using simple checkout with only shipping group applicable for order(HardgoodShippingGroup). It seems during some scenarios, ATG is creating one more shipping group of same type due to which I am getting the above error.
    Any pointers will be helpful

    HI,
    The error is displayed when the withholding tax has been changed in the master record of the vendor or customer. The change has been made after posting the invoice document, then at moment of payment there is a difference between withholding tax information in the invoice and the new withholding tax information changed in the master record.
    In order to prevent the system from the inconsistencies and to avoid the error message, please run report RFWT0010.
    Also, I would like to clarify the functionality of the report RFWT0010. If you have posted a vendor invoice relevant to withholding tax at time of invoice and later you change the master data so this withholding tax type is not longer relevant, this change will not take affect for the already posted invoice, althought you run report RFWT0010. Withholding tax amount at time of invoice is already posted and deducted If you later modify vendor master record and add a new withholding tax
    type relevant at time of payment, you will need to run report RFWT0010 before payment in order to take this withholding tax type into consideration, since it is relevant for payments.
    Please assign points if it useful.
    Regards
    Ravinagh Boni

  • Purchasing Groups not defaulting to all new line items

    Hi,
    We are on SRM 4.0. currently, we can only assign a user to one purchasing group.Now my problem is Purchasing Groups not defaulting to all new line items (when changed in default settings).If any one faced this problem help me out.
    regards,
    sobhan

    Sobhan,
    Depending on your material group, the purchaing group will be defaulted. According to the responsibility tab and SPRO Config define objects in the backend system, the purchaing group will default in your basic data of the shopping cart screen.
    Even though in your default settings you will assign a Purchaing group, the purchasing group will be defaulyed on the basis of the above two crietrias mentioned.
    Please assigbn points for usefull answer !!
    Sundeep

  • Default accounts on item group set up

    Hi,
    This is a new company. I set up posting periods. I want to upload the item groups using DTW. The DTW upload fails because of error:
    One of the inventory accounts is missing  , 'Inventory Account'  [Message 173-6]
    I tried to manually enter an item group and get the same error.
    The accounts do not default in. I expected that they would default in because all the accounts are filled in under Administration > Setup > Financials > GL account determination.
    Why do the accounts not default from there?
    Thanks

    Hello,
    Does not matter you have mapped acount in Administration > Setup > Financials > GL account determination.
    you must be filled account code in Item Group template otherwise it will crease error message when you will make entries in transaction time .
    So better is please filled 4 to 5 manadatory account in templale.
    As you said you are also unable to make new gruop without filled account code then this is the indication or indicator without this code you cant upload same.
    Thanks
    Manvendra Singh Niranjan

  • DTW item group as SERVICE

    Hi Experts,
    I want to transfer through DTW item groups but the problem is that I am not able to transfer item group as SERVICE. What is the input field in Item group DTW file which you enable Item groiup as SERVICE.
    I am using SAP Business one 2005B with patch 39
    Regards,
    Kawish

    Hi Suda,
    In Item Group Setup screen i.e in Administration > Setup > Inventory > Item Group there is an Item Category option which is 'Service' or 'Material'.
    I want to use DTW for uploading item groups as Item Category as Service and not material.
    How to achive this through DTW.
    Hope I am able to give you a clear picture.
    Looking forward for an solution.
    Thanks and Regards,
    Kawish

  • Approved and published items are not shown in the catalog search

    Hello all,
    We are implementing SRM 4.0 SSP scenario .
    To support shopping of EBP we are also implementing CCM 2.0 as an add on.
    Please note CCM and EBP are on same client and CAT & CSE are also on the same client.
    No XI is involved. The catalog scheme was uploaded as CSV 2.0. The items for the catalog was created manually in CAT.
    Although the item has the status "approved" and the procurement catalog which is also the master catalog was published successfully the item is not shown after searching by CSE in EBP. Also the categories of the scheme are not shown in the catalog search.
    Do i have to approve the categories too and if yes can you  explain me how to do this?
    I think you see that I'm a newbie at srm and ccm and this problem is probably no real problem but I have not found any similar topics in the forum. So please can you help.
    Thanks a lot for your help.
    Best regards,
    Bernd

    Bernd: the reason I asked about views is that you don't have any error messages. This might indicate that (a) you have no items in the view, or (b) there's something wrong with view-role-user assignment.
    To check for (a), please go to the published procurement catalog, and go to Views tab. Check that your View is Active. Click on your View ID link to display view details. You should see a list of characteristics assigned to your view in Assign Characteristics sub-tab (the list should not be blank!). Go to Assign Items sub-tab. Navigate in your schema to find items that are supposed to be assigned to your view. You should see "Yes" in the "Assigned" column for those products. If you don't, then you simply don't have any items in your view.
    Another thing I'd like you to check: when the user calls your procurement catalog for search, do you see the name of the catalog displayed just below the drop-down "Select Categories Hierarchically"?
    Cheers,
    Serguei

  • 2LIS_02_ITM deleted line items are not reflected in BW

    Hi,
    Our current Data flow 2LIS_02_ITM-->DSO-->CUBE.
    I am analyzing a Invoice, When it is created 01.04.2014 it has got 10 Line Items and all the data is load to BW,Invoice with 10 Line items.
    In ECC I can now see the same Invoice only got 5 line items and from change log I can see 5 line items are deleted on 15.04.2014.These changes are not reflected in BW.In BW invoice data still shows 10 line items.
    If I perform setup table job and ECC RSA3 for that invoice I am getting only 5.
    I believe it’s something to do with 0RECORDMODE,Can you please let me know how to fix this in BW.
    Thanks

    Yes this is a known behavior in case of deltas.
    For Deleted line items Rocancel field will have an entry with R.
    To handle this you need to map ROCANCEL field in Technical group of transformation (Between Datasource to DSO) with 0Recordmode.
    Once you will do that then after activating the data in DSO it will nullify the records and deleted order or item will not appear.
    Regards,
    AL

  • Few line items are not coming at the time of creation of delivery

    Dear Experts,
    When the user creating the delivery few line items are not picking in the delivery document
    the following checks i verified,
    Stock is available
    shpping condition is differ from sold to party and sales document
    Plants are same for all the line items
    why the few line items are not coming in the delivery document creation,
    please help me to sort out this issue
    Thanks and Best Regards,
    Muralidharan S

    Hi,
    Check below points.
    Point 1:
    When you create a delivery document, you create it for a Shipping Point.
    So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
    Others got a different shipping point and that's why it didn't come to the same delivery document.
    Shipping point determined based on below criteria
    - Shipping Condition - From customer master
    - Loading Group - Material
    - Plant  - Delivery Plant of the sales order line item
    You assign a proffered shipping point for above combination in configuration.
    If that combination is not find, those line items are not going in to the delivery.
    You can check the log of the delivery document for more information as well.
    Point 2:
    Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
    Al  Requested delivery dates has to be on or before the  "Selection Date" you entered in the VL01N screen.
    Those line items which has a date more than that will dropped in the delivery.
    Best regards,
    Anupa

  • Line items are not coming on next page in Bill of Lading

    When I am printing Bill of Lading, if it has around 8 line items then its printing on the first page, but if line items are more then its not printing the remaining line items on second page.
    I have one delivery with 10 line items, when I am printing it then on first page 7 line items are coming and for 8 line item only material is printing and on second page its description is printing but last two line items are not printing at all.
    Kindly help me to resolve the issue as it is very critical.

    Hi,
    Check below points.
    Point 1:
    When you create a delivery document, you create it for a Shipping Point.
    So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
    Others got a different shipping point and that's why it didn't come to the same delivery document.
    Shipping point determined based on below criteria
    - Shipping Condition - From customer master
    - Loading Group - Material
    - Plant  - Delivery Plant of the sales order line item
    You assign a proffered shipping point for above combination in configuration.
    If that combination is not find, those line items are not going in to the delivery.
    You can check the log of the delivery document for more information as well.
    Point 2:
    Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
    Al  Requested delivery dates has to be on or before the  "Selection Date" you entered in the VL01N screen.
    Those line items which has a date more than that will dropped in the delivery.
    Best regards,
    Anupa

Maybe you are looking for