How to read data after select multiple record by checkbox,

hi experts
i  m using simple report with check box , and itab whcih contain records
how to read data after select multiple record by checkbox,
thanks

Hi Prashant,
   Try using this logic.This Code displays the list with check boxes. When you check a checkbox and press a button say 'Select All' or 'De Select all' or 'Display'. It will read the data of those records.
DATA :
  fs_flight TYPE type_s_flight,
  fs_flight1 TYPE type_s_flight1.
* Internal tables to hold Flight  Details                             *
DATA :
  t_flight LIKE
  STANDARD TABLE
        OF fs_flight,
  t_flight1 LIKE
   STANDARD TABLE
         OF fs_flight1.
SET PF-STATUS 'SELECT' .
PERFORM selection.
PERFORM displaybasic .
*                      AT USER COMMAND EVENT                          *
AT USER-COMMAND.
  PERFORM selectall .
*&      Form  SELECTION
*      Select query to reteive data from SPFLI table
*  There are no interface parameters to be passed to this subroutine.
FORM selection .
  SELECT  carrid                       " Airline Code
          connid                       " Flight Connection Number                  
    FROM  spfli
    INTO TABLE t_flight.
  DESCRIBE TABLE t_flight LINES w_lines .
ENDFORM.                               " SELECTION
*&      Form  DISPLAYBASIC
*      Display the basic list with SPFLI data
*  There are no interface parameters to be passed to this subroutine.
FORM displaybasic .
  LOOP AT t_flight INTO fs_flight.
    WRITE :
         w_check AS CHECKBOX,
         w_mark,
         fs_flight-carrid UNDER text-001,
         fs_flight-connid UNDER text-002.
  ENDLOOP.                             " LOOP AT T_FLIGHT..
  CLEAR fs_flight-carrid .
  CLEAR fs_flight-connid.
ENDFORM.                               " DISPLAYBASIC
*&      Form  SELECTALL
*      To check all the checkboxes with a 'selectall' push button
*  There are no interface parameters to be passed to this subroutine.
FORM selectall .
  CASE sy-ucomm.
    WHEN 'SELECT_ALL'.
      w_check = 'X'.
      w_line = 4 .
      DO w_lines TIMES.
        READ LINE w_line .
        MODIFY LINE w_line FIELD VALUE w_check .
        ADD 1 TO w_line .
      ENDDO.                           " DO W_LINES TIMES
      CLEAR w_line.
    WHEN 'DESELECTAL'.
      w_check = space.
      w_line = 4 .
      DO w_lines TIMES.
        READ LINE w_line FIELD VALUE w_mark .
        IF w_mark = space .
          MODIFY LINE w_line FIELD VALUE w_check .
        ENDIF.                         " IF W_MARK = SPACE
        ADD 1 TO w_line .
      ENDDO.                           " DO W_LINES TIMES
    WHEN 'DISPLAY'.
IF sy-lilli BETWEEN 4 AND w_lines .
    DO w_lines TIMES.
      READ LINE w_num FIELD VALUE w_check INTO w_check
                                 fs_flight-carrid INTO fs_flight-carrid
                                 fs_flight-connid INTO fs_flight-connid.
      IF sy-subrc = 0.
        IF w_check = 'X'
          SELECT  carrid
                  connid
                  fldate               " Flight date
                  seatsmax             " Maximum capacity in economy
                  seatsocc             " Occupied seats in economy class
            FROM  sflight
            INTO  TABLE t_flight1
           WHERE  carrid = fs_flight-carrid
             AND  connid = fs_flight-connid.
          LOOP AT t_flight1 INTO fs_flight1.
            WRITE :
              / fs_flight-carrid UNDER text-001,
                fs_flight-connid UNDER text-002,
                fs_flight1-fldate UNDER text-007,
                fs_flight1-seatsmax UNDER text-008,
                fs_flight1-seatsocc UNDER text-009.
          ENDLOOP.
        ENDIF.                         " IF SY-SUBRC = 0
      ENDIF.                           " IF W_CHECK = 'X'.
      ADD 1 TO w_num.
    ENDDO.                             " DO W_LINES TIMES
    CLEAR w_check.
    w_num = 0.
  ELSE .
    MESSAGE 'INVALID CURSOR POSITION ' TYPE 'E' .
  ENDIF.                               " IF SY-LILLI BETWEEN..
ENDCASE.                             " CASE SY-UCOMM
ENDFORM.                               " SELECTALL
Much Regards,
Amuktha.

Similar Messages

  • How to read data from select Options in another view without using context

    I have 2 views, one for selection screen and another for displaying result.
    In selection screen view I have define a select options with the help of webdynpro component.
    Now my object is display result in result view based on entry of selection screen.
    I don't want to do binding in context node, without that how I can read data of select option
    in result view?
    Regards,
    Rasmi Ranjan Mishra

    Solve by own.
    If I define the Select options in component controller, then it will be global in nature. so i can get the value of select options
    in another view also.
    Regards,
    Rasmi Ranjan Mishra

  • How to read data after using the PRINT function in visual basic

    I know the benchlink can capture the spectrum analyzer screen for me, but I want to integrate it into my application. I use NI spy to detect the communications from the benchlink and put it into my application. After sending the "PRINT 0" command, my "ilrd SpectrumAnalyzer, temp, 500" command doesn't work, giving me EARG error. Does anyone knows if it is because I can not define the temp to be string or some other problem?
    b.t.w, the communications I get from NI Spy actually read some unknown characters from the instrument, what kind of data it is? Any idea how to use it?
    thanks.

    Hello elm,
    This is completely dependent on your instrument; if you are getting the data then you are halfway there. Look in your instrument's programmer's reference manual to see if they mention how the picture is encoded in bytes. There are so many different ways to encode a picture in binary that speculating and guessing would probably never yield the true result. If there is no mention in the manual, contact the instrument manufacturer.
    Sorry I could not be of more help.
    Scott B.
    Applications Engineer
    National Instruments

  • How to select multiple records from a TREE in the table

    HI,
    I have a tree structure which is in the table.When I open the node of the tree,all the subnodes are coming as one-one records in the table.I want to slect multiple record from this table.I applied onLeadSelect for this table,I can select only 1 record from the table.
    Can any one plz suggest me how to select multiple records from the table so that I can get all the data of those selected record.
    Regards
    -Sandip

    Rashmi/Kukku,
    First of all, Thanks for your help!
    Is there any other way in which we can access tables other than using BAPIs or RFCs?
    In my case, there is a table structure which has to be updated with values after validating a key. i don't think there is any RFC available now. do i need to create bapi/rfc for that?
    Krishna Murthy

  • How to select multiple records in ALV with out pressing ctrl

    Hi Experts,
    Is there a way to select multiple records in ALV with out pressing ctrl button on the key board?
    Selection and deselection should allow multiple records.
    any clue is highly appreciated.
    regards,
    Ajay

    The keyboard always plays a role, although with the Shift key you can select blocks of records.
    ○       CTRLclick, CTRLspacebar
    Toggles a selection.
    ○       SHIFTclick, CTRLshift
    Selects the area from the lead selection to the row selected. If no lead selection is set, the selection starts from the first row. In the multiNoLead mode, the selection starts from the row last selected

  • Displaying the selected multiple records from node using onleadselect event

    Hi all,
    How to display the selected multiple records from node to node using onleadselect event.
    i came to know tht to fulfill this requirement i need to use the method get_selected_elements,
    how to use this method in my event??
    sree

    Hi Sree,
    Try below code..
    DATA : lo_nd_it_lips TYPE REF TO if_wd_context_node,             // This is first node
                 lo_el_it_lips TYPE REF TO if_wd_context_element,
                 ls_it_lips TYPE wd_this->Element_it_lips,
                 lt_it_lips TYPE wd_this->Elements_it_lips.
               DATA: wa_temp TYPE REF TO if_wd_context_element,
                lt_temp TYPE wdr_context_element_set.
    * navigate from <CONTEXT> to <IT_LIPS> via lead selection
          lo_nd_it_lips = wd_context->path_get_node( path = `ZRETURN_DEL_CHANGE.CHANGING_3.IT_LIPS` ).
          CALL METHOD lo_nd_it_lips->get_selected_elements
            EXPORTING
                INCLUDING_LEAD_SELECTION = ABAP_true
            RECEIVING
              set = lt_temp.
          DATA lo_nd_pack_mat TYPE REF TO if_wd_context_node.          //Second Node
          DATA lo_el_pack_mat TYPE REF TO if_wd_context_element.
          DATA ls_pack_mat TYPE wd_this->Element_pack_mat.
          DATA lt_pack_mat TYPE wd_this->Elements_pack_mat.
    * navigate from <CONTEXT> to <PACK_MAT> via lead selection
          lo_nd_pack_mat = wd_context->get_child_node( name = wd_this->wdctx_pack_mat ).
          lo_nd_pack_mat->get_static_attributes_table( importing table = lt_pack_mat ).
          LOOP AT lt_temp INTO wa_temp.
            CALL METHOD wa_temp->get_static_attributes
              IMPORTING
                static_attributes = ls_it_lips.
                  ls_pack_mat-vbeln = ls_it_lips-vbeln.
                  ls_pack_mat-material = ls_it_lips-matnr.
                  ls_pack_mat-vgbel = ls_it_lips-vgbel.
                    append ls_it_lips to lt_unpack.
                  CLEAR ls_pack_mat.
           ENDLOOP.
    Cheers,
    Kris.

  • How to  select multiple chek in checkbox in alv

    how to  select multiple chek in checkbox in alv

    Hi,
    Following report is the checkbox alv sample report.
    REPORT  YMS_CHECKBOXALV.
    TYPE-POOLS: slis.
    DATA: t_fieldcatalog TYPE slis_t_fieldcat_alv.
    DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
    DATA: s_layout TYPE slis_layout_alv.
    DATA: BEGIN OF itab OCCURS 0,
    icon TYPE icon-id,
    vbeln TYPE vbeln,
    kunnr TYPE kunnr,
    erdat TYPE erdat,
    box TYPE c,
    END OF itab.
    DATA: v_repid TYPE syrepid.
    START-OF-SELECTION.
    Get the data.
    SELECT vbeln kunnr erdat UP TO 100 ROWS
    FROM vbak
    INTO CORRESPONDING FIELDS OF TABLE itab.
    IF sy-subrc <> 0.
    MESSAGE s208(00) WITH 'No data found'.
    LEAVE LIST-PROCESSING.
    ENDIF.
    Modify the record with red light.
    itab-icon = '@0A@'.
    MODIFY itab TRANSPORTING icon WHERE NOT vbeln IS initial.
    v_repid = sy-repid.
    Get the field catalog.
    CLEAR: s_fieldcatalog.
    s_fieldcatalog-col_pos = '1'.
    s_fieldcatalog-fieldname = 'ICON'.
    s_fieldcatalog-tabname = 'ITAB'.
    s_fieldcatalog-seltext_l = 'Status'.
    s_fieldcatalog-icon = 'X'.
    APPEND s_fieldcatalog TO t_fieldcatalog.
    CLEAR: s_fieldcatalog.
    s_fieldcatalog-col_pos = '2'.
    s_fieldcatalog-fieldname = 'VBELN'.
    s_fieldcatalog-tabname = 'ITAB'.
    s_fieldcatalog-rollname = 'VBELN'.
    APPEND s_fieldcatalog TO t_fieldcatalog.
    CLEAR: s_fieldcatalog.
    s_fieldcatalog-col_pos = '3'.
    s_fieldcatalog-fieldname = 'KUNNR'.
    s_fieldcatalog-tabname = 'ITAB'.
    s_fieldcatalog-rollname = 'KUNNR'.
    APPEND s_fieldcatalog TO t_fieldcatalog.
    CLEAR: s_fieldcatalog.
    s_fieldcatalog-col_pos = '4'.
    s_fieldcatalog-fieldname = 'ERDAT'.
    s_fieldcatalog-tabname = 'ITAB'.
    s_fieldcatalog-rollname = 'ERDAT'.
    APPEND s_fieldcatalog TO t_fieldcatalog.
    Set the layout.
    s_layout-box_fieldname = 'BOX'.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
    i_callback_program = v_repid
    is_layout = s_layout
    i_callback_pf_status_set = 'SET_PF_STATUS'
    i_callback_user_command = 'USER_COMMAND'
    it_fieldcat = t_fieldcatalog[]
    TABLES
    t_outtab = itab.
    FORM SET_PF_STATUS *
    --> EXTAB *
    FORM set_pf_status USING extab TYPE slis_t_extab.
    SET PF-STATUS 'TEST2'.
    ENDFORM.
    FORM user_command *
    --> UCOMM *
    --> SELFIELD *
    FORM user_command USING ucomm LIKE sy-ucomm
    selfield TYPE slis_selfield.
    Check the ucomm.
    IF ucomm = 'DETAIL'.
    LOOP AT itab WHERE box = 'X'.
    itab-icon = '@08@'.
    MODIFY itab TRANSPORTING icon.
    ENDLOOP.
    ENDIF.
    selfield-refresh = 'X'.
    ENDFORM.
    Thanks,
    Sankar M

  • How to stored data after clicking checkbox  save in database table

    TYPE-pools: slis.
    tables:mkpf,mseg,mard,COWB_COMP.
    TYPES: BEGIN OF tp_data,
          mblnr LIKE mseg-mblnr,
         matnr LIKE mseg-matnr,
         werks LIKE mard-werks,
         lgort LIKE mard-lgort,
         lgpbe LIKE mard-lgpbe,
         charg LIKE mseg-charg,
         bwart LIKE mseg-bwart,
         budat LIKE mkpf-budat,
         menge LIKE mseg-menge,
         meins LIKE mseg-meins,
         kostl LIKE mseg-kostl,
         aufnr LIKE mseg-aufnr,
         rsnum LIKE mseg-rsnum,
         endkz like COWB_COMP-endkz,
    END OF tp_data,
    tp_tbl_data TYPE STANDARD TABLE OF tp_data.
    *data: t_data like ztable occurs 0 with header line.
    Constants
    Data objects (variable declarations and definitions)
    Report data to be shown.
    DATA: it_data TYPE STANDARD TABLE OF tp_data.
    Heading of the report.
    DATA: t_heading TYPE slis_t_listheader.
    ========================== Selection Screen ==========================
      SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
                   smatnr FOR mseg-matnr MODIF ID m2,
                   swerks FOR mard-werks MODIF ID m3,
                   slgort FOR mard-lgort MODIF ID m4,
                   slgpbe FOR mard-lgpbe MODIF ID m5,
                   scharg FOR mseg-charg MODIF ID m6,
                   sbwart FOR mseg-bwart MODIF ID m7,
                   skostl FOR mseg-kostl MODIF ID m8,
                   saufnr FOR mseg-aufnr MODIF ID m9,
                   srsnum FOR mseg-rsnum MODIF ID m10.
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
    PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
               pse RADIOBUTTON GROUP radi,
               bps RADIOBUTTON GROUP radi.
    SELECTION-SCREEN END OF BLOCK b2.
    SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
    PARAMETER:layout TYPE i.
    SELECTION-SCREEN END OF BLOCK b3.
    =========================== Event Blocks =============================
    AT selection-SCREEN.
    start-OF-selection.
    PERFORM get_data USING it_data.
    END-OF-selection.
    PERFORM build_alv USING it_data t_heading.
    =========================== Subroutines ==============================
    *&      Form  get_data
          Gets the information to be shown in the report.
    FORM get_data USING t_data TYPE tp_tbl_data.
      SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
        msegmenge  msegmeins msegkostl msegaufnr mseg~rsnum
      INTO CORRESPONDING FIELDS OF TABLE t_data
      FROM mseg
      JOIN mard ON mardmatnr EQ msegmatnr
                   JOIN mkpf ON msegmblnr EQ mkpfmblnr
                   WHERE mseg~matnr IN smatnr.
    ENDFORM.                    " get_data
    *&      Form  build_alv
          Builds and display the ALV Grid.
    FORM build_alv USING t_data TYPE tp_tbl_data
          t_heading  TYPE slis_t_listheader.
    ALV required data objects.
      DATA: w_title   TYPE lvc_title,
            w_comm    TYPE slis_formname,
            w_status  TYPE slis_formname,
            x_layout  TYPE slis_layout_alv,
            t_event    TYPE slis_t_event,
            t_fieldcat TYPE slis_t_fieldcat_alv,
            t_sort     TYPE slis_t_sortinfo_alv.
      REFRESH t_fieldcat.
      REFRESH t_event.
      REFRESH t_sort.
      CLEAR x_layout.
      CLEAR w_title.
    Field Catalog
      PERFORM set_fieldcat2 USING:
            1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
            2 'MATNR' 'MATNR' 'MSEG' space space space space space space space space space space space space  t_fieldcat ,
            3 'WERKS' 'WERKS' 'MARD' space space space space space space space space space space space space  t_fieldcat,
            4 'LGORT' 'LGORT' 'MARD' space space space space space space space space space space space space t_fieldcat ,
            5 'LGPBE' 'LGPBE' 'MARD' space space space space space space space space space space space space t_fieldcat ,
            6 'CHARG' 'CHARG' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
            7 'BWART' 'BWART' 'MSEG' space  space space space space space space space space space space space t_fieldcat,
            8 'BUDAT' 'BUDAT' 'MKPF' space  space space space space space space space space space space space t_fieldcat,
            9 'MENGE' 'MENGE' 'MSEG' space  space space space space space space space space space space space t_fieldcat,
            10 'MEINS' 'MEINS' 'MSEG' space  space space space space space space space space space space space t_fieldcat,
            11 'KOSTL' 'KOSTL' 'MSEG' space  space space space space space space space space space space space t_fieldcat,
            12 'AUFNR' 'AUFNR' 'MSEG' space  space space space space space space space space space space space t_fieldcat,
            13 'RSNUM' 'RSNUM' 'MSEG' space  space space space space space space space space space space space t_fieldcat,
        14 'ENDKZ' 'ENDKZ' 'COWB_COMP' space space 'select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
    Layout
      x_layout-zebra = 'X'.
    Top of page heading
      PERFORM set_top_page_heading USING t_heading t_event.
    Events
      PERFORM set_events USING t_event.
    GUI Status
      w_status = ''.
    User commands
      w_comm   = 'USER_COMMAND'.
    Order
    Example
    PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
      PERFORM set_order USING 'MBLNR' 'IT_DATA' 'X' space 'X' t_sort.
    PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
    PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
    Displays the ALV grid
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_callback_program       = sy-repid
        it_fieldcat              = t_fieldcat
        is_layout                = x_layout
        it_sort                  = t_sort
        i_callback_pf_status_set = w_status
        i_callback_user_command  = w_comm
        i_save                   = 'X'
        it_events                = t_event
        i_grid_title             = w_title
      TABLES
        t_outtab                 = t_data
      EXCEPTIONS
        program_error            = 1
        OTHERS                   = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM.                    " build_alv.
    *&      Form  set_top_page_heading
          Creates the report headings.
    FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
          t_events  TYPE slis_t_event.
      DATA: x_heading TYPE slis_listheader,
            x_event   TYPE LINE OF slis_t_event.
    Report title
      CLEAR t_heading[].
      CLEAR x_heading.
      x_heading-typ = 'H'.
      x_heading-info = 'Reporte Prueba'(001).
      APPEND x_heading TO t_heading.
    Program name
      CLEAR x_heading.
      x_heading-typ = 'S'.
      x_heading-KEY = 'Program: '.
      x_heading-info = sy-repid.
      APPEND x_heading TO t_heading.
    User who is running the report
      CLEAR x_heading.
      x_heading-typ = 'S'.
      x_heading-KEY = 'User: '.
      x_heading-info = sy-uname.
      APPEND x_heading TO t_heading.
    Date of execution
      CLEAR x_heading.
      x_heading-typ = 'S'.
      x_heading-KEY = 'Date: '.
      WRITE sy-datum TO x_heading-info.
      APPEND x_heading TO t_heading.
    Time of execution
      CLEAR x_heading.
      x_heading-typ = 'S'.
      x_heading-KEY = 'Time: '.
      WRITE sy-uzeit TO x_heading-info.
      APPEND x_heading TO t_heading.
    Top of page event
      x_event-name = slis_ev_top_of_page.
      x_event-FORM = 'TOP_OF_PAGE'.
      APPEND x_event TO t_events.
    ENDFORM.
    *&      Form  set_events
          Sets the events for ALV.
          The TOP_OF_PAGE event is alredy being registered in
          the set_top_page_heading subroutine.
    FORM set_events USING t_events TYPE slis_t_event.
      DATA: x_event   TYPE LINE OF slis_t_event.
    Example
    clear x_event.
    x_event-name = .
    x_event-form = .
    append x_event to t_event.
    ENDFORM.
    *&      Form  set_order
          Adds an entry to the order table.
    FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
          t_sort TYPE slis_t_sortinfo_alv.
      DATA: x_sort TYPE slis_sortinfo_alv.
      CLEAR x_sort.
      x_sort-fieldname = p_fieldname.
      x_sort-tabname   = p_tabname.
      x_sort-UP = p_up.
      x_sort-down = p_down.
      x_sort-subtot = p_subtot.
      APPEND x_sort TO t_sort.
    ENDFORM.                    "set_order
    *&      Form  set_fieldcat2
          Adds an entry to the field catalog.
    FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname p_ref_tabname
          p_outputlen p_noout
          p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
          p_hotspot p_showasicon p_checkbox p_edit
          p_dosum
          t_fieldcat TYPE slis_t_fieldcat_alv.
      DATA: wa_fieldcat TYPE slis_fieldcat_alv.
      CLEAR wa_fieldcat.
    General settings
      wa_fieldcat-fieldname = p_fieldname.
      wa_fieldcat-col_pos = p_colpos.
      wa_fieldcat-no_out = p_noout.
      wa_fieldcat-HOTSPOT = p_hotspot.
      wa_fieldcat-CHECKBOX = p_checkbox.
      wa_fieldcat-ICON = p_showasicon.
      wa_fieldcat-do_sum = p_dosum.
    Set reference fieldname, tablenam and rollname.
    If p_ref_tabname is not given, the ref_fieldname given is a data element.
    If p_ref_tabname is given, the ref_fieldname given is a field of a table. In case ref_fieldname is not given, it is copied from the fieldname.
      IF p_ref_tabname IS INITIAL.
        wa_fieldcat-rollname =   p_ref_fieldname.
      ELSE.
        wa_fieldcat-ref_tabname = p_ref_tabname.
        IF p_ref_fieldname EQ space.
          wa_fieldcat-ref_fieldname =   wa_fieldcat-fieldname.
        ELSE.
          wa_fieldcat-ref_fieldname =   p_ref_fieldname.
        ENDIF.
      ENDIF.
    Set output length.
      IF NOT p_outputlen IS INITIAL.
        wa_fieldcat-outputlen = p_outputlen.
      ENDIF.
    Set text headers.
      IF NOT p_seltext_m IS INITIAL.
        wa_fieldcat-seltext_m = p_seltext_m.
      ENDIF.
      IF NOT p_seltext_l IS INITIAL.
        wa_fieldcat-seltext_l = p_seltext_l.
      ENDIF.
      IF NOT p_seltext_s IS INITIAL.
        wa_fieldcat-seltext_s = p_seltext_s.
      ENDIF.
      IF NOT p_reptext_ddic IS INITIAL.
        wa_fieldcat-reptext_ddic = p_reptext_ddic.
      ENDIF.
      IF NOT p_ddictxt IS INITIAL.
        wa_fieldcat-ddictxt = p_ddictxt.
      ENDIF.
    Set as editable or not.
      IF p_edit IS NOT INITIAL.
        wa_fieldcat-INPUT     = 'X'.
        wa_fieldcat-EDIT     = 'X'.
      ENDIF.
      APPEND wa_fieldcat TO t_fieldcat.
    ENDFORM.                   "set_fieldcat2
    =========================== Subroutines called by ALV ================
    *&      Form  top_of_page
          Called on top_of_page ALV event.
          Prints the heading.
    FORM top_of_page.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
      EXPORTING
        i_logo             = 'XXXXX'
        it_list_commentary = t_heading.
    ENDFORM.                    " alv_top_of_page
    *&      Form  user_command
          Called on user_command ALV event.
          Executes custom commands.
    FORM user_command USING r_ucomm     LIKE sy-ucomm
          rs_selfield TYPE slis_selfield.
    ENDFORM.                    "user_command
    this is my code, how to store data after clicking checkbox in databasetable,
    how to write that cide.
    plz send me code.

    hi!,
    use MODIFY to update data into the data base table.
    regards
    anjali

  • I am using reader 11.0.10.32 Win7 64 bit.  I am unable to print from Reader.  After selecting print all pages, the pri

    I am using reader 11.0.10.32 in Win7 Professional 64 bit.  I am unable to print from Reader.  After selecting print all pages, the progress bar goes through the proper page count. After that a pop up window appears with the message: The document could not be printed.  After pressing the OK button that pop up closes and the next pop up window appears with the message: There were no pages selected to print.  After pressing the OK button, the pop up closes and the pdf document is still visible in Reader.
    I can print from other programs to that printer.  I can print from Reader to other printers.
    I was able to print to all printers before.  I uninstalled Reader and reinstalled it from the Adobe web site.
    Any suggestions to make it print?
    Thanks.

    Answered multiple times every day: open Adobe Reader | Edit | Preferences
    under Documents, change 'View documents in PDF/A mode' to Never
    under Security (Enhanced), disable Protected Mode at startup

  • After selecting multiple values, immediately it will placed in Table contro

    hello experts,
    I m using select-option for multiple value selection.
    I want:-after selecting multiple values, immediately it will placed in
    Table control columns which is on same screen of select-option and that columns are grayed out.
    I'm using this table control for input purpose.
    I tried multiple value selection for input in table control but it is not possible.
    Please Help.

    There should be some user action to trigger the filling in of the table control with values from the select options.
    Typically it is a click of Enter from the User s side. This would automatically trigger the PAI of the Module Pool program. So i feel the FM that is mentioned in the above post is not required to read the values because in the PAI , the value from the Select Options would have already flown from the Screen to the Program.
    It is important that you use Subscreen for Select options and write your code in the PAI between loop endloop.
    LOOP at Itab.
    MODULE  fill_itab.
    Endloop.
    I hope everyone agrees with me on this .
    Regards,
    Arun

  • I do not have an option to join tracks in Itunes 11.2.2.3. My options button has only two choices after selecting multiple tracks.

    I do not have an option to join tracks in Itunes 11.2.2.3. My options button has only two choices after selecting multiple tracks - get track names and submit cd track names. How do I join multiple tracks into one?

    Weird, works for me.
    tt2

  • How to read data from a CLUSTER STRUCTURE not cluster table.

    Hi,
    how to read data from a CLUSTER STRUCTURE not cluster table.
    regards,
    Usha.

    Hello,
    A structre doesnt contain data.. so u cannot read from it. U need to find out table of that structure and read data from it.
    Regards,
    Mansi.

  • How to read data from a file that was formatted by excel?

    Hi everyone, I'm familiar with java.io and the ability to read from files, can anyone tell me how to read data from a file that was formatted by excel? Or at least give me some web references so that I can learn about it?

    http://jakarta.apache.org/poi/hssf/index.html
    HSSF stands for Horrible Spreadsheet Format, but it still works!

  • How to read data from a router by using labview

    I am a  beginner labview. How to read data from a router by using labview ? 

    What kind of data are you trying to read?
    Does the router behave like a webserver that you log into?  If so, search the forums for threads discussing HTML.

  • How to read data from a connected modem

    any one can help me? how to read data from a connected modem. The modem received real-time data from other server. The data is in text format. I can see this text when I used hyperterminal for dial up and the data is accumulated such as:
    @aa1235678
    @bb2135647
    @cc5214367
    since it is real-time data, I want to read one line each time instantly when it arrives.

    You need to use the Java Communications API. (http://java.sun.com/products/javacomm/index.html)

Maybe you are looking for