How to read data from FESTO MPS work-station using easyport in Labview ?

Hello!
I am working on a festo MPS PA compact workstation and I have connected the system to the PC using the EasyPort.
So far, I can send commands to the system to turn on some components like Pump, Heater, Pressure Valve. But the problem is that I could not read the data from the sensors at the system like the tank level and the temperature of the water.
attached is the vi file for what I have done so far
I would really appreciate your help!!
Thank you in advance
Attachments:
EasyPort1.vi ‏19 KB

cise438,
thanks for the forum post. Are you not able to read any values? or are you getting incorrect values? Are the reads from the sensors digital reads or analog reads?
Applications/Systems/Test
National Instruments | AWR Group

Similar Messages

How to read data from PC format external disk, using Labview MAC

Hi folks,
For years I have not been able to read data files from a PC formatted (created) external disk, using Labview for Mac. More specifically:
- I have Labview 7.01 running on OS X 10.4.11 on a PowerBook G4
- I have a 500GB external USB/firewire disk that was formatted on a PC and has data files (custom format) that were created on the PC. I believe that C code actually creates the files, but Labview 7/PC opens the files and appends some info (I don't think the fact that C or Labview touches the files is actually relevant to this issue though).
- I can connect the 500 GB disk to my mac, and it will mount just fine and OS X can see all of the data files (and anything else on the disk).
- if I use my Labview app to open and read a data file it fails:
- open/create/replace.vi (with read-only access) shows a file dialog window that lets me navigate to any file on the external disk.
- but, the vi returns an error 7
- if I use OS X to copy the data file to my Mac disk, my Labview app works fine.
So, does anyone know if:
- I'm just doing something wrong in my Mac Labview app?
- Labview 7.x solves this problem?
- Labview 8/Mac solves this problem?
- OS X 10.5 solves this problem; with Labview 7 or 8; or does OS X 10.5 worsen the problem?
Thanks, in advance...

Hi kehander,
Thanks for the reply. I tried filling a constant path with the Mac-defined path to a data file on the USB disk (ie "DATA2:file1.dat"). This resulted in the same error message.
I then considered that maybe I was misinterpreting the LV error message, and that perhaps I was supposed to address the file using PC-notation (ie. "DATA2\file1.dat"), even though the app is running on a Mac. No joy with this, but I get a different error msg:
"Error 1430 occurred at Open File
Possible reason(s):
LabVIEW: The path is empty or relative. You must use an absolute path."
Can you share what your reasoning was for your suggestion... I'm not sure I understand why a constant path would produce different results?

How to read data from a file that was formatted by excel?

Hi everyone, I'm familiar with java.io and the ability to read from files, can anyone tell me how to read data from a file that was formatted by excel? Or at least give me some web references so that I can learn about it?

http://jakarta.apache.org/poi/hssf/index.html
HSSF stands for Horrible Spreadsheet Format, but it still works!

How to read data from a CLUSTER STRUCTURE not cluster table.

Hi,
how to read data from a CLUSTER STRUCTURE not cluster table.
regards,
Usha.

Hello,
A structre doesnt contain data.. so u cannot read from it. U need to find out table of that structure and read data from it.
Regards,
Mansi.

How to read data from a router by using labview

I am a beginner labview. How to read data from a router by using labview ?

What kind of data are you trying to read?
Does the router behave like a webserver that you log into? If so, search the forums for threads discussing HTML.

How to read data from a connected modem

any one can help me? how to read data from a connected modem. The modem received real-time data from other server. The data is in text format. I can see this text when I used hyperterminal for dial up and the data is accumulated such as:
@aa1235678
@bb2135647
@cc5214367
since it is real-time data, I want to read one line each time instantly when it arrives.

You need to use the Java Communications API. (http://java.sun.com/products/javacomm/index.html)

How to read data from a zipped MS Access file?

How to read data from a zipped MS Access file?

RPJ,
You do not need to use the Close Zip File.vi when you unzip a folder. This VI is used when you are creating a zip folder.
As for examples, I found a couple of ActiveX based MS Access examples. These programs look to be pretty basic. For more in depth example I would search Microsoft Developers Network
http://zone.ni.com/devzone/cda/epd/p/id/2188
http://zone.ni.com/devzone/cda/epd/p/id/1694
Regards,
Jon S.
National Instruments
LabVIEW R&D

How to read data from an internal table into a real table?

Hello experts,
I'm relatively new to ABAP and I'm trying to figure out how to read data from an internal table into a table that I created. I'm trying to use the RRW3_GET_QUERY_VIEW_DATA function module to read data from a multiprovider. I'm trying to read data from the e_cell_data and e_axis_data tables into a table that I've already created. Please see code below.
TABLES MULTITAB.
DATA:
query_name TYPE RSZCOMPID,
s_cubename TYPE RSINFOPROV,
t_cell_data TYPE RRWS_T_CELL,
t_axis_data TYPE RRWS_THX_AXIS_DATA,
t_axis_info TYPE RRWS_THX_AXIS_INFO,
wa_t_cell_data like line of t_cell_data,
wa_t_axis_data like line of t_axis_data,
w_corp_tab like line of t_cell_data.
s_cubename = 'CORP_MPO1'.
query_name = 'Z_corp_test'.
    CALL FUNCTION 'RRW3_GET_QUERY_VIEW_DATA'
       EXPORTING
         i_infoprovider           = s_cubename
         i_query                  = query_name
        i_t_parameter            = query_string_tab
       IMPORTING
         e_cell_data              = t_cell_data
         e_axis_data              = t_axis_data
         e_axis_info              = t_axis_info.
If anyone has any information to help me, I would greatly appreciate it. Thanks.

Hi,
<li>Once you call the function module RRW3_GET_QUERY_VIEW_DATA, lets say data is available in the corresponding tables e_cell_data e_axis_data which you have mentioned.
<li>Modify your internal table defined for other purpose, with data from e_cell_data e_axis_data like below.
LOOP AT t_cell_data INTO wa_t_cell_data.
"Get the required data from t_cell_data.
MOVE-CORRESPONDING wa_t_cell_data TO it_ur_tab.
"Modify your internal table wih data
MODIFY it_ur_tab TRANSPORTING <field1> <field2> <field3>.
ENDLOOP.
LOOP AT t_axis_data INTO wa_t_axis_data.
"Get the required data from t_cell_data.
MOVE-CORRESPONDING wa_t_axis_data TO it_ur_tab.
"Modify your internal table wih data
MODIFY it_ur_tab TRANSPORTING <field1> <field2> <field3>.
ENDLOOP.
Thanks
Venkat.O

Help me, How to read data from USB ???

Help me, How to read data from USB ???

If its a disk on key or some portable hard drive than once its connected to the usb and recognized by the system you can access it through java like you would access your hard drive.

JTable, how to read Data from it when enter is pressed

How to read Data from JTable on Return or lost focus from cell.
Also please tell me which listener I should should.
thx for help

You should read the tutorial about tables, cell editors and models.
Also you should not [url http://forum.java.sun.com/thread.jsp?thread=472677&forum=57&message=2186815]crosspost
Mike

How to extract data from Essbase to Flat File using ODI

Hi,
Anyone know how to extract data from Essbase to Flat File using ODI?
Thanks in advance.
Regards,
Sumardi

Hi,
Have you read through :-
Oracle Data Integrator Adapter for Hyperion Essbase Getting Started - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/odiess_getting_started.pdf
Oracle Data Integrator Adapter for Hyperion Essbase User's Guide - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/odiess_users.pdf
If you have read them and are still have a problem at what stage are you having the issues?
Cheers
John
http://john-goodwin.blogspot.com/

How to get data from a USB-UIRT device using Labview?

How to get data from a USB-UIRT device using Labview?
I'm trying to get data from a USB-UIRT device, is it posible with Labview?
I really appreciate your help,
thanks

You may want to contact the developer of the device for the API and DLL.
http://65.36.202.170/phpBB2/viewforum.php?f=3

Problem in reading data from Excel sheet to 2D string array (ActiveX & LabView).

I am trying to read data from Excel sheet to 2D string array (ActiveX & LabView). Error -2147352571 is generated (type mismatch) if cell value is "#NULL!", "#N/A" etc. What should I do?

Hello �
Is the error happening when the cell value is #NULL or #NA only?
Sometimes these errors occur because of an ActiveX object mismatch. The version of the ActiveX object might have changed or been updated since the VI was created. The VI tries to use an earlier, incompatible version of the ActiveX object.
To solve the problem, you need to link automation refnum terminal to the correct ActiveX object. To do so, right-click an automation refnum terminal and choose Select ActiveX Class»Browse from the shortcut menu. From the Type Library pull-down menu, select the latest version of the library you want to use, such as Microsoft Excel Object Library. In the Objects list, select an ActiveX object, and click the OK button. Link ea
ch automation refnum terminal in the VI and its subVIs until the run arrow is not broken. Also, you might have to replace some or all of the Invoke Nodes and Property Nodes for the ActiveX objects.
Also, I came across this Knowledgebase. The error number is slightly different but it is always good to check it out and make sure it is not your case.
Hope this helps.
S Vences
Applications Engineer
National Instruments

How to read data from analog input and export it to a file using Components Works

I've made a simple application (Delphi 5 using the activeX) that read data from analog input channel 0. After I read the data, I want to export it to a file using the Components Works on a 6035E NIDAQ. (I'm not using labview and don't want to use it)
How can I do that???
Regards,
Francis

Here's a sample code to do this...
P.S.: If you read only one channel this code won't work.
function MyFunction: Integer;
var
Low, High, i, j, ChannelCount, RowCount: Integer;
Po: P;
begin
//you are reading multiple channel
ChannelCount := VarArrayHighBound(Buffer, 1);
RowCount := VarArrayHighBound(Buffer, 2);
for i := 0 to ChannelCount do begin
for j := 0 to RowCount do begin
WriteToDisk(Buffer[i, j]));
end;
end;
end;

How to read data from a file in OSB

hi guys,
Recently, I've got a problem with reading file from specific location. I've actually followed this post OSB 11g - Read or Poll File in OSB - Oracle Fusion Middleware Blog, and then
I know how to read a file. However, it does not as expected. Because, I've found no way to read data from the file. Therefore, no chance to manipulate the data like assigning to a variable, or extracting ....
Hence, is there any way to read data from file by using proxy service in OSB ??? No Java code ???
by the way, supposed that there is no way to read data from a file in OSB. So, What purposes will the way in the post above be used for?
Many thanks in advance

http://jakarta.apache.org/poi/hssf/index.html
HSSF stands for Horrible Spreadsheet Format, but it still works!

How to read data from FESTO MPS work-station using easyport in Labview ?

Similar Messages

Maybe you are looking for