How to read message from MQ's by using MDB

Hi All,
Can any body help me,my requirement is like reading the messages from MQ and then insert into database.I did this in OSB but The same requirement has to done by using MessageDrivenBeans.
Regards
Mani

Please don't cross post.
Moderator action: I'm locking this thread.

Similar Messages

How to read data from a router by using labview

I am a beginner labview. How to read data from a router by using labview ?

What kind of data are you trying to read?
Does the router behave like a webserver that you log into? If so, search the forums for threads discussing HTML.

How to read message from JMS queue as a ByteMessage

Hi,
i want to browse a xml message from a JMS queue(in Weblogic 8.1) as a ByteMessage instance and then need to put it into byte array .
Then i want to read each byte by byte from that array.
Can any one please help me to solve it.
(i am using java language in the program to browse message from a queue).
Thanks in advance.
Regards,
Deba

You can refer to the following link for the detailed steps :-
Link :[http://www.informit.com/articles/article.aspx?p=170722&seqNum=3]

How to read messages from AQ

hi,
is there any possibility to view the messages of queue? Is there any query to view all messages that are present in the queue? I can able to dequeue message using Java client. But i would like to see messages present in the queue using some query/procedure?
Thanks,
naga

Hi,
You can check the view AQ$queue_table. where "queue_table" is the name of your queue table.
Regards,

How to read data from the data provider using javascript

Hi,
Please let me know how to read the data from the dataprovider using javascript(query assigned to the data provider).
My query has filter charateristics, free charateristics, charateristics in rows and key figure in column.
Thanks a lot for your kind help
Regards
Kandasamy

Kandaswamy,
Assign an ID to your table item , then in JavaScript , you can use ID.innerHTML and you will get the HTML code within that table for the same , then you can find out how best to get the exact value you desire from the innerHTML value which is a string with the entire HTML from within the table item.
Arun
Hope it helps....

How to Read Message from JMS Queue using Business Service(ALSB3.0)

Hi,
My Project Set up is as follows(using ALSB3.0).
1>One Proxy Service with transport as HTTP.
2>The Proxy service is calling another Business Service.
3>The Business Service has transport layer as JMS.
So here the business service is posting Request Message into the JMS queue.
I want at the same time it(The Business Service) should listen to another queue and from there it should read Response Message and forward back to the caller proxy service.
Can any one help me regarding this...
Thanks in advance...
Deba

Hi ,
Problem in : Reading / writing messages to the JMS Queue -
I am stuck with the same problem and I am not able to proceed futher, Can you please help me out in sending an example of how to do right configurations in ALSB and on the server. I read the documentation but still I dont see messages in the queues.
please help me out. can you post a small sample example
thanks
adi

How to read message from Active MQ using OSB

Hi All
I want to read from Active MQ ( situated on another server) using OSB (11g). My condition is
Active MQ---> OSB---> DB Tables
I know how to use BPEL to do this but I need to use OSB to do this. Client which puts data to Active MQ also puts data ( like eventtype)to its header and on basis of header(eventtype) I need to route the message to proper tables. Please let me know how can I do this and if any step by step info is available for this ( I checked on many blogs but couldn't find any).
Thanks very much
Regards
Gaurav

Did you try creating a MQ transport proxy service in OSB -
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15866/mq.htm#BGEFJHAF
Regards,
Anuj

How to read messages from mqseries continuously by java?

Hi,
I'm sending messages to the queue of MQSeries.
Here my requirement is i have to write a java/jms program that should run at the back side and check the queue for every 5 minutes for messages.If any message exists in the queue the java/jms program should read the message and display it on the console.
If anybody has idea please reply it.
thanks in advance

Hi!
You have many ways. You could define a cron on a UNIX box to make sure a simple command line app connects to the queue every 5 min and uses JMS API to read the queue and do whatever you need with the messages.
http://java.sun.com/products/jms/javadoc-102a/index.html
On the other hand, unless its critical to recover messages just every 5 min., you could create an MDB. Actually this is the best solution: a Message Driven Enterprise Java Bean is just a listener over the queue reacting instantly to every message received. The way to create and configure them depends strongly on your appserver and development process: an IDE as WSAD or something like that creates them very easily. The actual problem with these ones is to properly configure them on your appserver. However, all appservers will allow you to define a 'Foreign JMS Provider' or something like that pointing to the actual MQ implementation you have and define an activation specification on which to sit your MDB.
Regards
Jorge

How to read messages from IBM MQ's by using MDB

Hi All,
Can anybody help me,My requirement is like MDB will listen to a MQ and then inserting this message in to the data base table.This MDB projet has to deploy in weblogic server.Plz rovide any documents or else sample code.
Thanks
Mani

Mani wrote:
Thx PhHein,
For ur quick reply,there is no such information for meeting my requirement. Then I guess you should be looking for another solution. I'm pretty sure you just need to perform better research though. Try different search terms, spend more time reading and comprehending search results, etc.

How to read MAC from Catalyst WS-C4507R using SNMP

Hello!
I would like to get all the connected mac addresses from a Switch using SNMP. The all ports are set up as a VLAN 10. VLAN 2 is used as management interface.
#sh mac-address-table
Unicast Entries
vlan   mac address     type        protocols               port
-------+---------------+--------+---------------------+--------------------
   2    0013.c3c2.1cbf    static ip,ipx,assigned,other Switch
   2    c42c.030b.c1b5   dynamic ip,other              GigabitEthernet1/1
10    3c62.0078.44a7   dynamic ip                    FastEthernet3/4
10    3c62.0078.44aa   dynamic ip,other              FastEthernet3/4
10    3c62.0078.4b31   dynamic ip                    FastEthernet3/1
10    3c62.0078.4cb7   dynamic ip                    FastEthernet3/2
Multicast Entries
vlan    mac address     type    ports
-------+---------------+-------+--------------------------------------------
   1    ffff.ffff.ffff   system
   2    ffff.ffff.ffff   system Switch,Gi1/1
10    0100.5e7f.fffa     igmp Fa3/4
10    ffff.ffff.ffff   system Fa3/1,Fa3/2,Fa3/4
I used to work with the following string on an old 2950 Switch SNMPv2-SMI::enterprises.236.4.1.8.7.7.10.1.2.1 but this string is not working on the 4500.
Can anyone help me with my issue?
Thank you,
Andreas

Hi kehander,
Thanks for the reply. I tried filling a constant path with the Mac-defined path to a data file on the USB disk (ie "DATA2:file1.dat"). This resulted in the same error message.
I then considered that maybe I was misinterpreting the LV error message, and that perhaps I was supposed to address the file using PC-notation (ie. "DATA2\file1.dat"), even though the app is running on a Mac. No joy with this, but I get a different error msg:
"Error 1430 occurred at Open File
Possible reason(s):
LabVIEW: The path is empty or relative. You must use an absolute path."
Can you share what your reasoning was for your suggestion... I'm not sure I understand why a constant path would produce different results?

How to read data from Linux named pipes using java?

In linux box I want to get data from a named pipe(created using "mkfifo <filename>".
How I can read the incoming data from the named pipe?

there are some caveats though: if i remember correctly, when you reach the end of data in a fifo it will look like end-of-file and that may confuse some classes. So your mileage may vary

How to read data from the excel file using java code.

Hi to all,
I am using below code to getting the data from the excel file but I can't get the corresponding data from the specific file. can anyone give me the correct code to do that... I will waiting for your usefull reply......
advance thanks....
import java.io.*;
import java.sql.*;
    public class sample{
             public static void main(String[] args){
                  Connection connection = null;
                      try{
                           Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
                           Connection con = DriverManager.getConnection( "jdbc:odbc:Mydsn","","" );
                           Statement st = con.createStatement();
                           ResultSet rs = st.executeQuery( "Select * from [Sheet1$]" );
                           System.out.println("sample:"+rs);
                              ResultSetMetaData rsmd = rs.getMetaData();
                              System.out.println("samplersd:"+rsmd);
                           int numberOfColumns = rsmd.getColumnCount();
                              System.out.println("numberOfColumns:"+numberOfColumns);
                               while (rs.next()) {
                                        System.out.println("sample1:"+rs);
                                        for (int i = 1; i <= numberOfColumns; i++) {
                                             if (i > 1) System.out.print(", ");
                                             String columnValue = rs.getString(i);
                                             System.out.print(columnValue);
                                        System.out.println("");
                                   st.close();
                                   con.close();
                                  } catch(Exception ex) {
                                       System.err.print("Exception: ");
                                       System.err.println(ex.getMessage());
                    }

1: What is the name of the excel sheet?
2: What is printed in this program? null ? anything?
error?Excel file name is "sample.xls" I set excel file connectivity in my JDBC driver(DSN). Here in my program I am not giving that excel file name. I am giving only that excel sheet name. that is followed
ResultSet rs = st.executeQuery( "Select * from [Sheet1$]" );The output of this program is given bellow.
sample:sun.jdbc.odbc.JdbcOdbcResultSet@1b67f74
samplersd:sun.jdbc.odbc.JdbcOdbcResultSetMetaData@530daa
numberOfColumns:2

How can read data from my local PC using JDBC adapter

Hi experts.
Actually we don't have permissions to work on RDBMS. So by locally I have Oracle8.0 installed in my pc. so can i update the table in my database via JDBS adapter. If so please describe how and where can I find the connectivity between XI server and my local DB system.
Thanks.

The first question is: Can the XI access your local PC?
In most environments this is not possible.
Connect to the server where the XI is installed and log on with the <sid>adm user (or let an administrator do this). Try to ping your PC.
If this is successful, you have a good chance to connct your database. Follow the description in your database manual, which parameters you need to enter in the JDBC adapter channel.
Regards
Stefan

How to retreive all unconsumed messages from a topic with a MDB?

Hello!
I have a webapp that stores TextMessages in a Topic in WebLogic.
I have an ejbapp (Message driven bean) that reads messages from the topic.
If both are up and running the ejbapp reads all messages sent from the webapp to the topic.
But if I stop the ejbapp for a while and sends a couple of messages to the topic and then deploy the ejbapp again, then the ejbapp does not read the unconsumed messages. If I send a new message to the topic the ejbapp reads that new messages but it does not get the previous messages that are on the topic.
Is this the way it should work? Or could I get the message driven bean to consume all the messages that it has not consumed from the topic when it starts?
My weblogic-ejb-jar.xml looks like:
<!DOCTYPE weblogic-ejb-jar PUBLIC '-//BEA Systems, Inc.//DTD WebLogic 8.1.0 EJB//EN' 'http://www.bea.com/servers/wls810/dtd/weblogic-ejb-jar.dtd'>
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>OrderManagerMDB</ejb-name>
<message-driven-descriptor>
<pool>
<max-beans-in-free-pool>200</max-beans-in-free-pool>
<initial-beans-in-free-pool>20</initial-beans-in-free-pool>
</pool>
<destination-jndi-name>jms/OrdersTopic</destination-jndi-name>
<connection-factory-jndi-name>jms/OrdersConnectionFactory</connection-factory-jndi-name>
</message-driven-descriptor>
<enable-call-by-reference>True</enable-call-by-reference>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>And my ejb-jar.xml looks like:
<!DOCTYPE ejb-jar PUBLIC '-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN' 'http://java.sun.com/dtd/ejb-jar_2_0.dtd'>
<ejb-jar>
<enterprise-beans>
<message-driven>
<ejb-name>OrderManagerMDB</ejb-name>
<ejb-class>brownbagwarehouse.OrderManagerMDB</ejb-class>
<transaction-type>Container</transaction-type>
<acknowledge-mode>Auto-acknowledge</acknowledge-mode>
<message-driven-destination>
<destination-type>javax.jms.Topic</destination-type>
</message-driven-destination>
</message-driven>
</enterprise-beans>
</ejb-jar>My MDB onMessage looks like:
public void onMessage(Message message)
try
TextMessage textMessage = (TextMessage)message;
System.out.println(textMessage.getText());
catch(Exception e)
e.printStackTrace();
}Best regards
Fredrik

I am not much familiar with Weblogic, but i would suggest, you do a search for how to setup "Durable Subscriptions" in Weblogic. This will ensure the the messages that were sent when the consumer was not available, will be delivered once the consumer is available

How to view messages from another iPhone using your apple Id

How to view messages from another iPhone using your apple Id

Sign into iMessage using the same ID (in Settings>Messages>Send & Receive). The other phone should then see your messages too.

How to read message from MQ's by using MDB

Similar Messages

Maybe you are looking for