How to Read Message from JMS Queue using Business Service(ALSB3.0)

Hi,
My Project Set up is as follows(using ALSB3.0).
1>One Proxy Service with transport as HTTP.
2>The Proxy service is calling another Business Service.
3>The Business Service has transport layer as JMS.
So here the business service is posting Request Message into the JMS queue.
I want at the same time it(The Business Service) should listen to another queue and from there it should read Response Message and forward back to the caller proxy service.
Can any one help me regarding this...
Thanks in advance...
Deba

Hi ,
Problem in : Reading / writing messages to the JMS Queue -
I am stuck with the same problem and I am not able to proceed futher, Can you please help me out in sending an example of how to do right configurations in ALSB and on the server. I read the documentation but still I dont see messages in the queues.
please help me out. can you post a small sample example
thanks
adi

Similar Messages

How to read message from JMS queue as a ByteMessage

Hi,
i want to browse a xml message from a JMS queue(in Weblogic 8.1) as a ByteMessage instance and then need to put it into byte array .
Then i want to read each byte by byte from that array.
Can any one please help me to solve it.
(i am using java language in the program to browse message from a queue).
Thanks in advance.
Regards,
Deba

You can refer to the following link for the detailed steps :-
Link :[http://www.informit.com/articles/article.aspx?p=170722&seqNum=3]

How to read Java Object message from JMS Queue using JMS Adapter .

Dear All,
In my scenario i have to read a java object message from JMS Queue . I tried by using the JMS Adaper ,but i am not getting any Payload . Can any one tell me is there any special settings for JMS Adapter to read the Java Object message .
I am able to read the Message successfully thru JMS Adapter but in SXMB_MONI it is not showing any payload .
I also went in Message monitoring but i am getting this type of message in Sender JMS Adapter in Audit Log.
JMS Message ID XXXXX Message Type Null unknown.Payload can not be read and will be empty.
JMS Message ID XXXXX Payload Empty can not read.
Please Help.
Lateef

Hi,
As far as i know, JMS Object Messages is not supported by XI JMS adapter.
you need to have the JMS provider to transform the message to bytes messages.
(Refer to SAP note 856346)

Recieve/Read Messages from JMS Queue through ALSB

Hi,
I have configured JMS Queue in weblogic server.
I have created Messaging Service in ALSB which sends messages in MESSAGE QUEUE.
Now Is it possinle to receive messages from JMS Queue by creating business service in Aqualogic Service bus???

Hi dear,
 
I am sending Message through Serializable Object.
 
I have JMS Proxy which gets invoked when i send message to JMs Queue. JMS Proxy then calls business service.
 
 
Business Service has two functions. One is taking String as input and one is taking Serializable Object as Input.
 
 
public void recieveString(String str) 
public void recieveObject(Trade obj) 
-------------------------------------------------- 
Now I have configured Proxy Services' Request and Response
Message Type as a "TEXT". and I am sending ObjectMessage here so what kind of change I require.
 
I also want to configure my proxy so that if JMS queue recieves TextMessage then it should invoke reciveString() function and if Object Message then vice versa.....
 
But i am not able to handle object even...
When I am sending Object Message it takes as a TextMessage.
I am getting following exception when I am sending Object Message to JMS QUEUE. Request and Response Message types are XML Schema of that object.
 
 
<Nov 30, 2006 4:57:19 PM IST> <Warning> <EJB> <BEA-010065>
 
<MessageDrivenBean threw an Exception in onMessage(). The exception was: java.lang.AssertionError. 
java.lang.AssertionError at com.bea.wli.sb.transports.jms.JmsInboundMDB.onMessage(JmsInboundMDB.j
ava:112)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:42
9)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDL
istener.java:335)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:
291)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4060)
Truncated. see log file for complete stacktrace
>
Message was edited by:
alwaysvaghu

Debatching is possible when we are reading messages from JMS queue

Hi all,
If i place a message in a queue can i read the message from JMS using BPEL ( JMS Adapter ) or OSB( JMS Transport ) like batcth rather than reading the whole message in to the OSB or BPEL at the same time .
is this option is available in OSB/BPEL ??
Thanks
Phani

Hi all,
If i place a message in a queue can i read the message from JMS using BPEL ( JMS Adapter ) or OSB( JMS Transport ) like batcth rather than reading the whole message in to the OSB or BPEL at the same time .
is this option is available in OSB/BPEL ??
Thanks
Phani

How to remove messages from JMS Queue?how to configure queue in spring?

Hi
I have Confiured a JMS configaration in spring applicationConfiguaration.xml file
<bean id="connectionFactory" class="org.apache.activemq.ActiveMQConnectionFactory">
<property name="brokerURL" value="tcp://localhost:61616"/>
<property name="useAsyncSend" value="true"/>
</bean>
<bean id="queue" class="org.apache.activemq.command.ActiveMQQueue">
<constructor-arg value="foo"/>
</bean>
<bean id="broker" class="org.apache.activemq.xbean.BrokerFactoryBean">
<property name="config" value="classpath:activemq.xml" />
<property name="start" value="true" />

</bean>
<bean id="auditInterface"
class="org.springframework.jms.remoting.JmsInvokerProxyFactoryBean">
<property name="serviceInterface" value="com.infiniti.gpn.auditing.AuditInterface"/>
<property name="connectionFactory" ref="connectionFactory"/>
<property name="queue" ref="queue"/>
</bean>
<bean id="listenerContainer" class="org.springframework.jms.listener.SimpleMessageListenerContainer">
<property name="connectionFactory" ref="connectionFactory"/>
<property name="destination" ref="queue"/>
<property name="messageListener" ref="auditMessageListener"/>
</bean>
Sender is sedning messages continusly messages that messages r storing in queue , these r acupying more memory in RAM , due to that jboss is restarting for each request, is there any way to clean up messages in Queue ? if it is there then how will configure that queue in apllicationConfiguaration.xml file?
Thanks in advance
Nara

Hi,
Even i have a similar kind of requirement where in, i want to clear the JMS Queue Message programmatically, on certain condition.
i am using Spring JMS. The JMS Queue has a listener. In the listener we want to clear the Queue contents based upon the condition.
If anybody has any idea about this, please reply back.
Thanks in Advance.
Manjunath.

How to read message from Active MQ using OSB

Hi All
I want to read from Active MQ ( situated on another server) using OSB (11g). My condition is
Active MQ---> OSB---> DB Tables
I know how to use BPEL to do this but I need to use OSB to do this. Client which puts data to Active MQ also puts data ( like eventtype)to its header and on basis of header(eventtype) I need to route the message to proper tables. Please let me know how can I do this and if any step by step info is available for this ( I checked on many blogs but couldn't find any).
Thanks very much
Regards
Gaurav

Did you try creating a MQ transport proxy service in OSB -
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15866/mq.htm#BGEFJHAF
Regards,
Anuj

I want to use ODI to read XML messages from JMS queue and then process it..

I want to use oracle ODI (Oracle Data Integrator) to read XML messages from JMS queue and then process it.. i also want to process and validate the data in it....
Could anyone please tell me the steps to achieve the same. I tried some ways which i got on OTN, but not able to implement it exactly...
As i m very new to ODI, it will be great if you provide detailed steps..
Thanks in advance for your help....

Hi,
Were you able to do it? We are facing this same issue now and, despite the fact the docs say otherwise, it does not seem to be a trivial task.
TIA,
Tedi

How to get the XML messages from JMS Queue in BPM

I have one requirement in my application.we are sending XML messages to the JMS Queue.How to get the XML messages from JMS Queue and how to Extract the details from XMl.
can you please send me the code to get the XML messages from the JMS Queue.
Thank you,

Hi,
Sure others will have some other ideas, but here's what I typically do to get the XML from a JMS queue. Inside the Global Automatic that pops the messages off the queue you'd have logic similar to this:
artifactInfoNodes as Any[]
xmlObject as Fuego.Xml.XMLObject = XMLObject()
load xmlObject using xmlText = message.textValue
. . . Once you have this, it's a matter of deciding what you want to do with the message. Most times you'll parse the XML (using XPATH statemens), set argument variables and create a work item instance.
Hope this helps,
Dan

How to view messages from another iPhone using your apple Id

How to view messages from another iPhone using your apple Id

Sign into iMessage using the same ID (in Settings>Messages>Send & Receive). The other phone should then see your messages too.

Read message synchronously from JMS queue using OSB

Hi,
Is it possible to read message from the JMS queue using OSB based on the request invocation. I know messages can be read from the queue but it will be polling based.
The requirement is to have an OSB proxy service (HTTP service ) an an interface to the client application. Client application invokes the proxy service and the proxy service need to read message from the JMS queue and provide the message as response to the client.
Let me know if there are any pointers.
Thanks
Sandeep

Hi,
I spent some time trying to do this and apart from creating custom database tables etc. I was not able to achieve this.
We wanted to use in memory JMS queues in our situation.
In the end we developed a Java Web Service which preformed the on-demand read from the queue (using a particular message selector)
This is working for us without a problem
Robert

How can I send and receive a message from a queue using standalone program

Hi,
I want to write a standalone Java program which has to post a message to a queue and receive a message from a queue thats specified as a replyto queue.I want to have my application to be completely standalone without the need of a Application server.What all the Jars do I need to include in the application.My aim is to have the application standalone and portable so that the application runs on any machine that has a JRE.
Thanks in advance,
Prathima

Hi,
You can get quite simple standalone MQ Java programs from this site http://www.capitalware.biz/mq_code_java.html.
Also regarding the jars required for your application depends on the API being used. If you use MQI API few jars are required and if you decide to use JMS API you'll require few other jars. But you got to either install Websphere MQ Java Client, which will copy the jars to the respective location, or you can choose to copy the jars from some other machine manually.
Eventually, all the jars related to MQI and JMS API will reside under /usr/mqm/java/lib/ or /var/mqm/java/lib/ UNIX Environment. And in case of WINTEL, you should find the jars under C:\Program Files\IBM\WebSphere MQ\Java\lib.
Trust it clarifies...
Naren

Posting a message to JMS queue using B2B

Hi,
Could anyone suggest a solution for this scenario?
I have two trading partners say TP1 & TP2. Suppose TP1 is sending an xml message to TP2 using custom ebMS protocol, then at TP2, the message should be posted to a JMS Queue so that some other application can read it and process it.
The problem which I am facing is..
1) where to create that JMS Queue(I could not find any options for creating a JMS Queue neither in B2B console nor in enterprise manager console..!!)?
2) how to register TP2 to send msg to that JMS Queue(How that queue will be vissible to B2B)?
3) Should the endpoint be given as that JMS Queue while configuring the Delivery Channel for TP2?
Thanx in advance for your suggestions,
Regards,
Satya.

Hi Narayanan,
Thank you for your prompt reply. I understand that we need to create an external delivery channel to post the message to a JMS Queue from TP2. Currently I am using default AQ's (b2b.IP_IN_QUEUE & b2b.IP_OUT_QUEUE) at TP2 end to receive the message.
But, I want to post the message to JMS Queue. For this I need to create an external delivery channel and the corresponding end point should be the name of that JMS Queue. Is my assumption correct?
I have already gone through the thread that you have mentioned and the pdf as well. But, I am not able to find an option on how & where to create that JMS Queue?
Could you clarify on this?
Regards,
Satya.

Reading message from two queues and sort according the time stamp

Hi
I have a requirement where i have to read the message from two queue .. and sort according the Time stamp ( Field in payload ) and send it ot the Webservice ..
How i acheive using the BPM..
in the BPM i have to collect the message for every 20 sec ... and then sort it tout ...
S V

Do you mean from two sender? What do you exactly mean by "reading from two queues"?
Regards,
Prateek

Data retrieval from JMS queue using single SOA composite in a clustered env

Hi,
I have following situation:
1) A requester SOA composite (Composite1)is reading data from a File
2) Mediator is routing data received from Composite1 and writing in a JMS queue.
3) A provider composite (Composite2) is reading from the JMS queue.
Both Composite1 and Composite2 is deployed in a clustered environment.
Problem is Composite2 is not able to read data sequentially from JMS Queue sometime (for example out of 30000 transactions its failing once). Here it's a queue and only one producer and only one consumer is there.
What may cause this issue? I thought a single producer and single consumer on a queue will guarantee FIFO retrieval . Could you please advise where may be the gap?
Thanks
Edited by: user1054373 on Sep 18, 2012 11:29 PM

Hi,
I thought a single producer and single consumer on a queue will guarantee FIFO retrieval Java Message Service Specification does not guarantee ordered message delivery when applications use distributed queues...
Using Weblogic Message Unit-of-Order may solve your issue...
http://docs.oracle.com/cd/E23943_01/web.1111/e13727/uoo.htm#JMSPG389
Hope this helps...
Cheers,
Vlad

How to Read Message from JMS Queue using Business Service(ALSB3.0)

Similar Messages

Maybe you are looking for