How to read the data from a PDF document into SAP
Hi Everyone,
I am trying to read a PDF document from my desktop and get the data into SAP but i am not getting successful.
I am using the method cl_gui_frontend_services=>gui_upload and passing the filename and type and importing the file length and the data into an internal table.
I tried the file type as ASC but i couldn't get any records in the internal table and the filelength is displayed as 0.
When i tried the file type as BIN, it is giving the short dump. I guess that is because the file i am trying to read is not with the extension BIN.
Please Advice me on this
Poornima
Hi Kiran,
Below is my program..
REPORT zpdf_data_update.
DATA : lt_file_table TYPE filetable.
DATA : lv_rc TYPE i.
DATA : lv_filename TYPE string.
DATA : lv_filelength TYPE i.
TYPES : BEGIN OF hex_record,
data TYPE string,
END OF hex_record.
DATA: lt_rawtab TYPE TABLE OF hex_record.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
CHANGING
file_table = lt_file_table
rc = lv_rc
EXCEPTIONS
file_open_dialog_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
IF sy-subrc <> 0.
ENDIF.
READ TABLE lt_file_table
INTO lv_filename
INDEX 1.
cl_gui_frontend_services=>gui_upload(
EXPORTING
filetype = 'BIN'
filename = lv_filename
IMPORTING
filelength = lv_filelength
CHANGING
data_tab = lt_rawtab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
not_supported_by_gui = 17
error_no_gui = 18
OTHERS = 19 ).
But it is giving me a short dump saying that the field symbol is not assigned ...
If i give the file type as ASC , then i am getting an empty table... Please advise me on this
Thanks
Poornima
Similar Messages
-
How to read the data from an excel file into MYSQL by java language
Hi all,
I have some data in excel spread sheet and I want to put the data into MYSQL data base. I created the tables in MYSQL> How can I write a program in JAVA that puts the value from excel sheet to mysql??
I would appreciate your help
regardsBy typing code at the keyboard... but presumably you meant to ask what code you should type.
To get data out of Excel there are a few alternatives. The Google keywords I would use to find them are "java excel". I use Apache POI but there are other possibilities, I believe. As for getting the data into MySQL once you have extracted it from Excel, you would use JDBC. But you already knew that, didn't you? You did find the JDBC forum.
In general it's better to ask a specific question on a forum. If you don't have a clue (which is the way we all start out) then just telling people that isn't going to be helpful. The best you're going to get is links to tutorials, which you could perfectly well have found for yourself by simple web searches. -
How to read the data from Excel file and Store in XML file using java
Hi All,
I got a problem with Excel file.
My problem is how to read the data from Excel file and Store in XML file using java excel api.
For getting the data from Excel file what are all the steps i need to follow to get the correct result.
Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
Thanks & Regards,
Sreenu,
[email protected],
india,If you want someone to do your work, please have the courtesy to provide payment.
http://www.rentacoder.com -
How to select the data from a Maintainance View into an internal table
Hi All,
Can anybody tell me how to select the data from a Maintainance View into an internal table.
Thanks,
srinivas.HI,
You can not retrieve data from A mentenance view.
For detail check this link,
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
Regards,
Anirban -
How to read the data from excel file and store into the table?
Hi All,
I have table with BLOB datatype contains a excel file. I have to read that data from excel and store into one table with all the fields in excel.
All the excel fields and my table columns are same.
Can you share with me how can acheive this using LOB's?
ThanksHi OraSuirya,
you can try with external tables .
syntax as follows
create table ext_table_csv (
i Number,
n Varchar2(20),
m Varchar2(20)
organization external (
type oracle_loader
default directory ext_dir
access parameters (
records delimited by newline
fields terminated by ','
missing field values are null
location ('file.csv')
reject limit unlimited;
For this you need to create directory
Directory Creation syntax:
create or replace directory ext_dir as 'D:\oracle\user_dir\ext_dir';
grant read, write on directory ext_dir to <User>;
please paste the excel file in the particular directory .
I hope this will help you.
Please correct me if I am wrong anywhere .
Thanks,
Tippu. -
How to read the data from a file in another computer with user name and password login
How to read read the data from a file in anohter computer which need to login with user name and password?
duplicate post: http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2061478
duplicate post: http://forums.ni.com/t5/LabVIEW/do-need-to-enter-the-user-name-and-password-when-TCP-ip/m-p/2061612
duplicate post http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2060682 -
Reading the data from one component view into another component view
Hi All,
I have requirement to read the data from one component into another component while creating the service order. Here are the details.
Main View for Service order: BT116H_SRVO in that we have two assignment blocks like Organizational data(BTORGSET) and amount allocation(BTAMNTALL).This two blocks are two different component which are associated with main component(BT116H_SRVO).
I need to read the sales org data from component/View(BTORGSET/Orgsetdata) into Component/View(BTAMNTALL(HdrBillPlanDet) method DO_VALIDATE_INPUT.
I searched in SDN but all the posts are related to the data exchange between two views in same component. But My scenario is different as explained above.
Refer the attachments for the component link..
Please let me know how we can achieve this one..
Thanks,
Sapsar.Finally I was able to fix my code...My Mistakes were need to read the parent node above three levels and need to use the relation entity name while reading the data..
Below is the correction code
IF iv_index IS NOT INITIAL.
lr_iterator ?= collection_wrapper->get_iterator( ).
lr_current ?= lr_iterator->get_by_index( iv_index ).
lr_entity ?= lr_iterator->get_by_index( iv_index ).
ELSE.
lr_current = collection_wrapper->get_current( ).
ENDIF.
*loop back to root entity
WHILE lr_entity->get_name( ) NE 'BTAdminH'.
lr_entity = lr_entity->get_parent( ).
ENDWHILE.
*Get the related entity
IF lr_entity IS BOUND.
lr_collection ?= lr_entity->get_related_entities( iv_relation_name = 'BTHeaderOrgmanSet' ) .
IF lr_collection IS BOUND.
lr_orgset_m = lr_collection->get_current( ).
* lr_orgset = lr_orgset_m->get_related_entity( iv_relation_name = 'BTOrgSet' ).
lr_orgset = lr_orgset_m->get_property_as_string( 'SALES_ORG' ).
ENDIF.
ENDIF.
Thanks,
Sapsar. -
How to read the data from an internal table,when column names are known
Hi All
I have a specific requirement. I got an internal table with many fields (let it be my_tab). Some of the fieldnames (column names in internal table my_tab) are stored in separate internal table(let it be my_fields).
I need to store/read data corresponding to the fields (whose name is stored in my_fields) from my_tab.
I am able to build dynamic table (referred by field-symbol) with respect to the given field names in my_fields.
But i am unable to read the data corresponding to the fieldnames from my_tab.
Please provide me some pointer in this regard.
Regards
Swetabh ShuklaHI All
Thanks for the prompt response. I got solution for my question. Please check below thread. For quick reponse i posted my question in one more category. Thanks to all of you.
How to read internal table w.r.t. fieldnames stored in other table -
How to read the data from a column that is in clob data type (but XMLdata)
Hi ,
I have a table XYZ which has a column RESPONSE_XML in clob datatype format.we can convert it to XMLTYPE(RESPONSE_XML) to read the data in XML format.
Now this is the DynamicXML schema file. Here I want to see all the COMMONNAME, ResourceDescribedby_VALUE into column_A, ResourceDescribedby_ResourceSpecCharacteristic_Name tags into column_B
How can I do that .. any suggestions please ..
Here is a sample XML:
<?xml version="1.0" encoding="WINDOWS-1252" ?>
_- <soap:Body>
- <SearchResourceResponse xmlns="http://www.google.com/google.xsd">
- <MessageElements xmlns:tns="http://www.www.google.com/google.xsd" xmlns="">
<MessageStatus>SUCCESS</MessageStatus>
- <MessageAddressing>
<from>gmail</from>
<to>Gmail SOAPTester</to>
<messageId>1234</messageId>
<action>SearchResource</action>
<transactionId>OR</transactionId>
<ServiceName>SearchResource</ServiceName>
<ServiceVersion>1.1</ServiceVersion>
</MessageAddressing>
</MessageElements>
-<SearchResponseDetails xmlns:tns="http://www.www.google.com/google.xsd" xmlns="">
- <SubNetwork>
- <Pipe xsi:type="icl:Trail" xmlns:icl="http://www.www.google.com/google.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<CommonName>318-223-4675</CommonName>
<objectID>91535716980514105329</objectID>
<SourceSystem>MARS</SourceSystem>
- *<ResourceDescribedBy> <value>RDSSLA</value>* *<ResourceSpecCharacteristic> <name>*CentralOfficeCode</name> </ResourceSpecCharacteristic>
</ResourceDescribedBy>
- <ResourceRelationship>
- <Resource xsi:type="icl:Trail">
- <ResourceDescribedBy> <value>001</value> - <ResourceSpecCharacteristic> <name>AssignLocationExternalFormat</name> </ResourceSpecCharacteristic>
</ResourceDescribedBy>
- <ResourceDescribedBy> <value>001</value> - <ResourceSpecCharacteristic> <name>PairVerticalExternalFormat</name> </ResourceSpecCharacteristic>
</ResourceDescribedBy>
- <ResourceDescribedBy> <value>001</value> - <ResourceSpecCharacteristic> <name>PairVerticalInternalFormat</name> </ResourceSpecCharacteristic>
</ResourceDescribedBy>
- <ResourceDescribedBy> <value>+</value> - <ResourceSpecCharacteristic> <name>PairVerticalSign</name> </ResourceSpecCharacteristic>
</ResourceDescribedBy>
- <ResourceDescribedBy> <value>RDSSLA</value> - <ResourceSpecCharacteristic> <name>CentralOfficeCode</name> </ResourceSpecCharacteristic>
</ResourceDescribedBy>
- <ResourceDescribedBy> <value>B</value>- <ResourceSpecCharacteristic> <name>EntityType</name> </ResourceSpecCharacteristic>
</ResourceDescribedBy>
- <ResourceType>FeederCircuit</ResourceType>
- <LogicalPhysicalResource>
- <PhysicalResource xsi:type="icl:PhysicalConnector">
<usageState>S</usageState>
- <ResourceDescribedBy> <value>25.392</value> - <ResourceSpecCharacteristic> <name>CableLength</name> </ResourceSpecCharacteristic>
</ResourceDescribedBy>
</PhysicalResource>
</LogicalPhysicalResource>
- <TerminationPoint xsi:type="icl:TrailTerminationPoint">
<CommonName>1000/34A</CommonName>
- </Resource>
</ResourceRelationship>
<lrStatus>W</lrStatus>
</Pipe>
</SubNetwork>
</SearchResponseDetails>you don't appear to have posted valid XML, so I can't reproduce using your example, but you will need to look at something like this:
select xtab.common_name
from your_table yt
,xmltable('/SearchResourceResponse'
passing xmltype(yt.response_xml)
columns
common_name varchar2(20) path 'SearchResponseDetails/CommonName'
) xtab
; -
How to read the data from a refcursor
Hi all,
Here my program . I'm calling pr_test into another program there i need to read the values from refcursor of pr_test program . I dont want use all the values in my second program I need to pass empno and job only.
pls help me out how to read this?
package pg_test
is
type curvartype is ref cursor;
procedure pr_test(p_empno in number, o_curvar_out curvartype);
end;
package pg_test is
procedure pr_test( o_curvar_out curvartype)
is
begin
open o_curvar_out for
select * from emp;
end loop;
end;
end;Thanks,
Venkat.I dont want use all the values in my second program I need to pass empno and job only.Since your cursor gets all the columns (using the * is not a good way to code the cursor), that is what your other program will get when it calls pr_test procedure. You will have to FETCH all the columns in that other procedure and discard the ones you do not need.
Alternatively, change the code of cursor to select only the columns you would actually need. -
How to select the data from DB and write into File?
Hi Experts,
Can any one please help me,
I want to write the data from a table "T1" from Data Base to one file in windows.
This functionality i need to achive in SSIS package through script component and Execute SQL task if it's passible.
If any other way is there please help me.through script component and Execute SQL task if it's passible
The easier way is to use a "Data Flow" Task with a "OleDB Data Source" pointing the the SQL Server table / query and a "Flat File Destination" to export to a file.
Olaf Helper
[ Blog] [ Xing] [ MVP] -
How to read the data from a sorted table
Hi all,
How to read data from the sorted tables. Please provide some examples.
Thanks and regards,
LisaYou can read like this :
DATA: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA ITAB LIKE SORTED TABLE OF LINE WITH UNIQUE KEY COL1.
DO 4 TIMES.
LINE-COL1 = SY-INDEX.
LINE-COL2 = SY-INDEX ** 2.
INSERT LINE INTO TABLE ITAB.
ENDDO.
CLEAR LINE.
READ TABLE ITAB WITH TABLE KEY COL1 = 3
INTO LINE TRANSPORTING COL2.
WRITE: 'SY-SUBRC =', SY-SUBRC,
/ 'SY-TABIX =', SY-TABIX.
SKIP.
WRITE: / LINE-COL1, LINE-COL2. -
How to read the data from XML file and insert into oracle DB
Hi All,
I have below require ment.
I will receive data in the XML file. then i need to read that data and insert into oracle tables. please let me know how this can be handled.
Many Thanks.Sounds a lot like this question, only with less details.
how to read data from XML variable and insert into table variable
We can only help if you provide us details to help as we cannot see what you are doing and only know what you tell us. Plenty of examples abound on the forums that cover the topics you seek as well. -
i face some difficulties here. the datas are encrypted...... how to get correct data ..........
Excel files are in a propriertary microsoft format. A LabVIEW "spreadsheet" file is a file containing an ASCII table with tabs separating columns and linefeeds separating rows. They are not ther same!
If you use "write to spreadsheet file" and name the file *.xls, this does NOT make it an excel file, it just tells the operating system to open it with excel if you double-click it. Excel is smart enough to notice that it is not really an excel file and does its best to convert it transparently. The same does not work in reverse.
You have several options:
You can use excel to export your data to something LabVIEW can read. Try e.g. tab delimited text.
You can use e.g. activeX to read an excel file, see: http://zone.ni.com/devzone/cda/epd/p/id/3409
Search for excel in your example finder for more possibilites.
LabVIEW Champion . Do more with less code and in less time . -
How to upload the data from legacy system database to SAP data base
Hi.
We are doing analysis of Legacy system and which needs to be converted to SAP system i.e. SAP implementation.
I just want to know , how we migrate the existing whole data( from legacy system) into SAP system.
and which method is the best method to use data migration from legacy to SAP system if data legacy data amount is huge.
Please suggest me.
Thanks.Hi
We can either use the BDC or BAPI or LSMW or Direct Input techiniques for the data transfers.
The combination of both Session and Call transaction can be used to achieve this that includes the error handling also. This invloves the screen interaction.
These days, BAPIs are used to overvome some upgrade problems. For easy upgradation, we cna go for BAPIs. Here ther is no screen intercation.
LSMW mainly used for master data transfers using some standrad programs.
As per your client or company desicions we can choose any of them.
Please refer to these links for more understanding -
BDC Vs LSMW -
BDC VS LSMW
BDC Vs BAPI -
BDC VS LSMW
Thanks & Regards,
Chandralekha.
Maybe you are looking for
-
Follow up to formating axis values
I am on to yet another chart that isn't working the way I want it to. I did not see anything else in the forum, so, here we go. I have a table that is showing the breakdown of two sets of data into percentages in bins. Imagine a histogram table conve
-
Is it possible to use iMacs Monitor as second monitor for a MBP? I have an iMac and am thinking to get a MBP, this would be great in some cases.
-
My daughter was fooling around with the settings and now her ipod is locked and her code wont open it . what can we do
-
Correlation & Multi message processing?
Hi, I have some queries about <i>Correlation</i> in XI. 1. What is correlation in XI ? 2. How is Correlation different from Multi message mapping ? Thanks, Snehal.
-
Trying to export / save Pages1 document to HTML.
Are there any new ways round the difficulties of exporting pages documents as HTML documents? I have Pages 1 and do not want to spend 80 dollars on Pages 2 and after that another 80 dollars on Pages 3. Will Apple come out with a fix for users with Pa