How to record my voice by headphone on mac mini

Hi all,
How to record my voice by headphone on mac mini. The headphone have a microphone. It can record on window 7, but on mac mini, it's not working.
I don't know why. Please help me.
Thanks.

Open Quicktime Player
File Menu: New Audio Recording....
However... if the headphone/microphone combination has two 3.5mm jack plugs (pink and green) then the microphone output (pink) is "mic.level" - which is TOO QUIET for the audio input on a Mac, which is expecting the much stronger "line.level" signal strength.
Solutions: get a microphone pre-amplifier between the mic and the Mac (not cheap); or a different microphone with a USB interface.

Similar Messages

Flex 3 How to recording the voice to the local file.can u help sample souce code

How to recording the voice to the local file.can u help sample souce code

What? the link is not opening? Check once properly man. If you need code here it is
import flash.system.Security;
import flash.media.Microphone;
import flash.events.ActivityEvent;
import flash.events.SampleDataEvent;
import flash.events.StatusEvent;
import flash.utils.ByteArray;
import flash.media.Sound;
import flash.events.MouseEvent;
import flash.media.SoundChannel;
import flash.events.Event;
import org.bytearray.micrecorder.encoder.WaveEncoder;
import flash.net.FileReference;
var mic:Microphone;
var soundBytes:ByteArray;
var recBytes:ByteArray= new ByteArray();
var sc:SoundChannel;
var sound:Sound;
recordBtn.addEventListener(MouseEvent.CLICK, getMic);
stopBtn.addEventListener(MouseEvent.CLICK, stopRecording);
playBtn.addEventListener(MouseEvent.CLICK, plays);
saveBtn.addEventListener(MouseEvent.CLICK, saveAudio);
function getMic(e:MouseEvent)
soundBytes= new ByteArray();
//returns an array that total mics available
var totalMics:Array = Microphone.names;
//mic is a singleton class gets microphone to record sound
mic = Microphone.getMicrophone();
//Sets the minimum input level that should be considered
mic.setSilenceLevel(0);
mic.rate = 44;
//to capture microphone audio listen for this event
mic.addEventListener(SampleDataEvent.SAMPLE_DATA, recordAudio);
function recordAudio(e:SampleDataEvent)
//capture the byte array data available with the event
while (e.data.bytesAvailable)
var soundData:Number = e.data.readFloat();
soundBytes.writeFloat(soundData);
function stopRecording(e:MouseEvent)
mic.removeEventListener(SampleDataEvent.SAMPLE_DATA, recordAudio);
//set the bytearray position to zero for playing from starting
soundBytes.position = 0;
function plays(e:MouseEvent)
//intatiazle sound instance
sound= new Sound();
soundBytes.position = 0;
//listen for the event when runtime requests new audio data.
sound.addEventListener(SampleDataEvent.SAMPLE_DATA, playAudio);
//play the sound with sound channel
sc = sound.play();
sc.addEventListener(Event.SOUND_COMPLETE, soundComplete);
function playAudio(e:SampleDataEvent)
//if audio bytes is greate than 4 read the recorded byte array data and write it into the sound
for (var i=0; i<8192; i++)
if (soundBytes.bytesAvailable > 4)
var sample:Number = soundBytes.readFloat();
e.data.writeFloat(sample);
e.data.writeFloat(sample);
function soundComplete(e:Event)
sound.removeEventListener(SampleDataEvent.SAMPLE_DATA, playAudio);
sc.stop();
function saveAudio(e:MouseEvent)
soundBytes.position = 0;
//waveencoder class used to encodes bytearray data properly used to play properly after saving
//you can get this api from below link
//http://code.google.com/p/micrecorder/downloads/detail?name=MicRecorder%201.2.zip&can=2&q=
var encod:WaveEncoder= new WaveEncoder();
var byte:ByteArray = encod.encode(soundBytes,2);
var file:FileReference= new FileReference();
file.save(byte, “test.wav”);

How to turn off voice over command in mac book pro 10.6.8

how to turn off voice over command in mac book pro 10.6.8

Open Universal Access preferences and disable it there.

How can I use two displays with my Mac Mini?

How can I connect two displays to my Mac Mini (newest generation with one thunderbold and one hdmi)?

Have you tried connecting one to the HDMI output, and another to the Thunderbolt port (with the appropriate Mini DisplayPort-to-other connection adapter as needed)?

How can I set a password on my Mac Mini so someone else cannot open it and read emails, etc.?

How can I set a password on my Mac Mini? Someone else is reading my emails. I would like to be able to lock it so nothing on it could be seen without a password. Is that possible? How?

So uncheck the automatic login after making sure you know your password and it will require a password on startup.
You can also go into the security preferences and have the machine lock itself once the screensaver is activated. This is sometimes controlled from the screensaver preferences as well.
You could also go nuts and activate multiple users where your name appears in the menu bar. When you walk away from the machine you can use that menu to take you to the "login window", effectively locking your machine.

How do i reformat my hard drive on mac mini late 2011 with yosemite before selling my mac

how do i reformat my hard drive on mac mini late 2011 with yosemite before selling my mac

You can't legally sell or give away that computer with Yosemite installed.
Before you sell or give away your computer, in addition to the steps listed in this support article, take these steps:
1. Run Apple Diagnostics or the Apple Hardware Test. The buyer will do this (or he should), and you don't want to be surprised by the results.
2. Reset the PRAM and the SMC, which might contain personal information.
3. If you set a firmware password, remove it by running Firmware Password Utility in Recovery mode.
4. If you activated FileVault in OS X 10.7 or later, turn it off.
5. If you use Boot Camp, the partition must be deleted.
6. If you created any other data partitions on the internal drive, remove them in Disk Utility.
7. If the machine has an internal hard drive, erase the one remaining data partition with the option to zero out data. An SSD doesn't need to be zeroed.
You can't legally or practically transfer any software downloaded from the Mac App Store to the new owner of the machine, even if it was free. That includes OS X, so if you upgraded to OS X 10.7 or later, you must reinstall an older OS, either from the installation media, if applicable, or by starting up in Internet Recovery mode (option-command-R at the startup chime.) If you installed from physical media, deliver those to the new owner.
If you're selling the machine, or donating it in working order, and it originally shipped with OS X 10.4 or 10.5, then you have the option of installing either from the discs that came with it or from a retail Snow Leopard disc (which you must then transfer to the buyer.) The buyer should understand that if he doesn't get the original discs from you, he won't get the bundled iLife applications or the Apple Hardware Test. Replacements for the original discs can be ordered from Apple.
The new owner will have to redownload any software that came from the App Store, including OS X upgrades, under his or her Apple ID. If you ever updated the bundled iLife applications (Garage Band, iMovie, and iPhoto) through the App Store, you can't transfer those either. The buyer will have to purchase them.
Remove the machine from your list of registered products. If it's still covered by an AppleCare Protection Plan, transfer the coverage to the new owner by following the instructions in the AppleCare Terms and Conditions (under the heading "Transfer of Plan.")

How do I know if my brand new Mac mini (late 2012) really has Mac OS X 10.9 Maverick preinstalled?

How do I know if my brand new Mac mini (late 2012) really has Mac OS X 10.9 Maverick preinstalled, as stated when I bought it, without opening the box and booting the device? It says "Copyright 2012 Apple Inc." on one of the sides of the box, which makes me uncertain.
If it does not have Mac OS X 10.9 Maverick preinstalled I might have bought an old device, in worst case as old as a year or more.
/Birger

The late 2012 does have USB 3 !!
I specifically waited to purchase a Mac Mini
until USB 3 was made available.
Look at the diagram (picture) on the bottom of the box. The diagram that details which ports are available on the unit.
If you see 3 after USB.. then it is a late 2012 Mac Mini.
Looking at my box it clearly says USB 3.
I don't think there has been any changes to the Mac Mini since late 2012.
other than the pre-installed OS being Mavericks now..
You will want USB 3!!!
My box also indicates it is version 2.6 (just above the Airport ID).
(Mine is definitely a late 2012 model).

How do i reload OS X Server on Mac Mini, App store says installed but no reset or reload, system tells me to reinstall

how do i reload OS X Server on Mac Mini, App store says installed but no reset or reload, system tells me to reinstall?

Reboot holding down the Command and R keys. This will get you in to the Recovery partition. From there you can reinstall the entire OS. Please note, Server.app will not be included in the reinstall. You will need to log into your App store account to download it.

How do I sync new i phone with mac mini????

How do I sync new i phone with mac mini?

Open up iTunes, then go ahead and plug in your phone to the USB port on the back of the Mini using the USB cable that came with the phone.

I've lost my old firefox, how do i get it back? My MAC mini is OS 10.5

i've lost my old firefox, how do i get it bak. My Mac mini has OS 10.5.

Hi Dominique,
you can get old versions of Firefox here:
http://mac.oldapps.com/firefox.php?old_firefox=65

How to run the Hardware test on a Mac mini 2015 ?

how to run the Hardware test on a Mac mini 2015 ?

Welcome to Apple Support Communities
New Macs come with Apple Diagnostics instead of Apple Hardware Test, but their purpose is the same: check that your Mac's hardware is working properly. See -> https://support.apple.com/kb/PH18765?locale=en_US
To run it, you only have to hold down the D key while your Mac is starting up, and follow the steps.

How to record a voice?

I don't know GarageBand at all and I have to record a dialogue to import in final cut pro. I'd read the manual but I'm running out of time.
Can anyone help me with how to simply record a voice and then save is an audiofile?
Thank you very much!!
Anneke
imac Mac OS X (10.4.8)

Do I choose New Music Project, New Podcast Episode or New Movie Score?
Where do I select my instrument (= USB microphone)?
(thx)

How to connect my 60gb IPOD and my Mac Mini

I have my trusty 60GB ipod (no video), with the older wide connector and the funny USB or whatever it is symbol looks like a "Y".
Nice grammer huh.
ANyway the cable I have doesn't plug in to my mac mini or MBP.
What cable do I use to hook 'er up to ITUNES on either system?

Open Quicktime Player
File Menu: New Audio Recording....
However... if the headphone/microphone combination has two 3.5mm jack plugs (pink and green) then the microphone output (pink) is "mic.level" - which is TOO QUIET for the audio input on a Mac, which is expecting the much stronger "line.level" signal strength.
Solutions: get a microphone pre-amplifier between the mic and the Mac (not cheap); or a different microphone with a USB interface.

No audio via headphone socket - Mac Mini

2010 Mac Mini 10.6.8
No output via the headphone jack. Audio is working OK via internal speaker / HDMI / Bluetooth / Airplay.
There is a signal going through the socket and cable as noise can be heard (squeal, squeaks, etc, but not a distinguishable output)
1) Disconnected all USB's etc
2) Rebooted with different cables for audio and HDMI
3) Reset PRAM
4) Apple Hardware Test - all OK
5) Tech Tool Test - all OK
6) Checked all setting in Audio Midi/sound preferences
Any ideas? - Thanks

Trip to Apple store and Genius Bar (Genius my a**e!), where I had a 2 hour wait, 20 minutes with the Genius (I use the term lightly) to be told what I already knew, plus he thinks the headphone output is connected to main logic board and that will cost almost £300 for parts. Dream-on!
On the way home I purchased a £8 Toslink cable (same was £32 in Apple store) plugged it in and hey presto - perfect sound.
So it looks like the headphone socket is stuck in digital mode.
Well at least it's a marginal improvement. Now off to research & establish how many other folks report same issue.

How can I use screen share of my mac mini? Problems validating

I recently purchased a mac mini to act as my home media server for audio as my airport express was not playing nicely with my Peachtree DAC. Anyway, I have set up sharing on the mac mini and can't figure out how to connect from my wife's Macbook, or her iPad. (I use a PC, so would welcome advice if available on how to connect across platforms as well.) My goal is to set up the mac mini without a monitor or keyboard connected to it and have it sit with our main stereo.
I am able to connect to the mac mini via my wife's macbook IF I ask for permission and I grant it from the mac mini. However, I am unable to connect no matter what I try if I try to log in as a registered user. I have tried to add her as a user to the mac mini, I have tried to log in as a guest, and I have tried to log in with a password but no matter what I try, I get an authentication error when I try to log in as an authorized user. For more clarity, here is what I have tried:
1. Added authorized users on the mac mini. I created a user name for "jeff", "maureen", and "lastname_maureen" on the mac mini and provided a password for each user. "jeff" and "maureen" are just created on the mac mini, and "lastname_maureen" is the user name of my wife's computer. I confirmed the passwords, and still am unable to connect. I have allowed any user on the network to access screen share, and no matter what I do I get an authentication error. Again, if I attempt to log in from my wife's computer by asking permission, it works fine but I can't figure out how to set up an account to login. Please help. Thanks!

Have you tried connecting one to the HDMI output, and another to the Thunderbolt port (with the appropriate Mini DisplayPort-to-other connection adapter as needed)?

How to record my voice by headphone on mac mini

Similar Messages

Maybe you are looking for