How to recover music from iPod hard drive??

I've got an 80GB iPod, not sure of generation it's from 2006. A few months ago I had an issue when playing in my truck and the accessory I was using burned a hole in the lower left corner of the face of the iPod. After this happened, I was able to listen to the music still on the ipod through my headphones however I couldn't charge it and my computer wouldn't recognize it. So I couldn't transfer anything onto my computer. Luckily I backed up about 80% of my music, but there is still alot missing. I have tried to transfer the hard drive over to another iPod, from 2005, and when I turn on the iPod it displays "Connect to iTunes to restore" or something along those lines. When I connect to iTunes, it displays "iTunes has detected an iPod in recovery mode-Use iTunes to restore". I don't get the option to back up files when I click on restore. I'm not sure what to do at this point, I'm hesitant to restore because I know I'll lose all of my music. If anyone can help, that would be fantastic!

You could have a look at this application: TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
Just be aware that what you'll be recovering will be photos optimised for the iPod so they won't be the same quality as the original full resolution versions.

Similar Messages

  • How to recover data from bad hard drive

    Once a hard drive goes bad (cannot get into the computer), is there any hope of recovering any data from it?  If so, how?

    Do you mean the hard drive is mechanically broken for sure?  It's not a data corruption issue that is causing a problem with starting up the Mac, but maybe not be a bad mechanism?
    If the drive is definitely broken, there are businesses that specialize in recovering data from bad hard drives.  For example
    http://www.drivesaversdatarecovery.com/  (I always saw their booth at MacWorld Expos...)
    The cost of such services is usually high.
    cannot get into the computer
    So that probably means the hard drive in question is the internal drive?  If you don't know for sure that the hard drive is physically broken, you can try starting up using your Mac OS X installation disc.  Insert disc in optical drive and start up with the C key held down.  When you get to Installer's screen, go up to the menu bar and run Disk Utility from the Utilities menu.  Does the internal drive appear in the Disk Utility sidebar?
    Alternately, if you have another Mac (that has FireWire), you can try starting the Mac with the problem in FireWire Target Disk Mode,
    http://support.apple.com/kb/HT1661
    Connect the "target" Mac to the other Mac (running normally) using a FireWire cable.  Run Disk Utility on that Mac.  Does the hard drive of the Mac in FireWire Target Disk Mode appear in the sidebar?
    If you can get the internal drive to appear in Disk Utility, you may be able to run Repair Disk on the First Aid tab.  There are also third-party utilities, such as TechTool Pro (Micromat), Drive Genius (Prosoft), and Disk Warrior (Alsoft), that may be able to fix (or at least recover data from) the hard drive.

  • How to recover data from the hard drive?

    I've always heard that data is never really gone from the hard drive even after you delete it. How do I recover that data? My problem is some photos (my honeymoon photos) have been deleted from my computer and they have also been deleted from the recycle bin. I sure would like to recover them.

    First stop using your system, then get a copy of a program that will recover files like Data Rescue 3.  If you have a time machine backup you may be able to restore them. 

  • How to recover data from a hard drive with bad blocks?

    An external hard drive, 4TB Iomega...connected via eSATA cable...had a power outage and the drive won't be read by OSX now.  (Yes, it was on a surge protector and no I did not have a backup.  I was actually preparing for the process of creating a backup when the power went out!)  Anyway, I have tried using Data Rescue 3 and DiskDrill to try and recover data from the drive.  I can recover the first 1/3 of the drive, but it ejects when either app tries to access the bad block.  Can anyone tell me how/what software to use to recover the data?  I know there are programs that will avoid the bad block but I've only found them for Windows.  Are there any that will do such a thing in Lion?  Any help will be appreciated...and no, I can not afford a data recovery service.  Trying to do this on my own.

    Basics of File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.

  • How to transfer music from old hard drive

    I just upgraded my drive (same computer) and installed leopard. My older drive has my imported and purchased music on it. Running under Tiger. I can access the drive with a remote kit, so all files from the old drive are still accessable.
    how and what do I need to do to transfer all my music library and purchased music/authorizations to the new hard drive?

    I've tried doing that, and had an odd result. All of the names of the songs are added to my library, but when I attempt to listen to well over half of them, I get an error message:
    "The song "__" could not be used because it could not be found. Would you like to locate it"
    And indeed, the only music that shows up in the finder window are songs that will play. The very newest music seems to play, including things purchased from iTunes. Tech support said they can't help with the issue because of copyright concerns, but I just don't want to put 5 crates full of CDs into my computer one by one!
    Any thoughts?

  • How to retrieve music from ipod without syncing it

    So my computer was messed up and I'm missing a bunch of music so i was needing to get the music files back. I have them on my ipod but i cant view them in itunes unless i sync the ipod which would erase the songs not on the computer and defeat the purpose of what i'm trying to do. I have the 'manually manage music' option checked and when i open up my ipod file from my computer it doesn't have the music files only pictures and stuff. I know it's possible to get the music without erasing it but i forget how and its really annoying, so how would i do so?

    Here is the way about how to recover music from iPod
    Assuming you're using a Windows 7 or 8 computer here.
    Go to the start menu > type in hidd > open 'Show Hidden Files and Folders' > check the circle in that says Show hidden files, folders, and drives. > Click apply.
    Now plug your iPod in. Go to Computer > click on eg. 'Azrielrain's ipo (H:)' or whatever shows up that looks like that > iPod_Control > Music > The files underneath that.
    Now in those files will be mp3 or mp3 variants of your music, they will NOT however have the original names given to them. You can copy the files to your desktop, or music folder. That is pretty much the closest you'll get to being able to salvage your music from your iPod. Or you can use Data Recovery to help you recover your iPod music.

  • Had to reinstall Lion.  Backed up music to external hard drive.  When I plug in iPod msg says it's synced w/another iTunes library.  Do i "erase and sync" and re-add music from the hard drive?

    Had to reinstall Lion.  Backed up my music to an external hard drive.  When I plug in my iPod a prompt msg says it's synced w/another iTunes library and asks if I want to "erase and sync" (to what is now an empty library) or "Transfer purchases".  Do i "erase and sync" and re-add music from the hard drive once that's done?

    You just need to tell iTunes where the library is located. If you want it back on your internal drive, copy the entite iTunes folder. Follow the instructions below.
    iTunes: How to move your music to a new computer (Mac or Windows):
      http://support.apple.com/kb/HT4527

  • Old laptop died, got latest itunes on new laptop and recovered all music from external hard drive but ipad not recognised as device when plugged in? Do i reset my ipad2!!!

    Old laptop died, got latest itunes on new laptop and recovered all music from external hard drive but ipad2 not being recognised as a device when plugged in so can't sync? Do i reset my ipad2?!!!! Its only taken 7 months to get to this point.
    My ipad is set to sync via wifi but it is still trying to look for my old laptop which has been trashed..but i have deauthorised it and removed it from my account and still not recognised.
    Please help (an extreme novice to Apple products)

    Sync Your iOS Device with a New Computer Without Losing Data
    http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
     Cheers, Tom

  • How can I move music from a hard drive to iphone

    How can I move music from a hard drive to iphone?

    Import it into an iTunes library and then sync the iPhone with that library. If desired, launch iTunes with the Shift key held down and create or choose an iTunes library on that drive.
    (106987)

  • How do I transfer music from old hard drive to Mavericks?

    how do I transfer music from old hard drive to Mavericks?

    You need only post once.
    More information would help.  The simplest answer is drag the files from the old drive to the iTunes window when you have the application open, or the Automatically Add To iTunes folder.  If you mean the whole library that is a different answer.

  • Moving Music from External Hard Drive

    I just rebooted my pc and I am trying to put my iTunes music from my hard drive back on the computer. How do I do this? Do I just drop and drag directly from the hard drive to the itunes folder in explore or do I have to bring both folders out to the desktop. Thank you!!

    Do I just drop and drag directly from the hard drive to the itunes folder in explore or do I have to bring both folders out to the desktop.
    Neither. You need to use the Import function inside iTunes, or drag the folder to the library in the open iTunes application window.
    (47964)

  • Recover data from external hard drive that was Windows format and connected on a Macbook Pro. Did I lose everything? What happened?

    Hi there this is my first question here!
    I connected my external hard drive originally formatted on PC on my new Macbook. The first time I connected it I could see all my files but today I connected it and after I couldn't see any file nor even on my pc appears as NO NAME with a different name and nothing on it. I think was reformatted, any help to recover all my data?
    It's really important stuff for me

    If the Apple Store couldn't get files off of the drive, it is unlikely that you will be able to. If you have backups, those would be the best way to go. You could also try booting up the computer and holding down T to boot into Target Disk Mode. Plug the broken computer into another one with FireWire and see if it works to recover data from external hard drive. If you can see it, try booting up the broken computer while holding down Option. Choose Recovery HD from the menu, then choose to Reinstall OS X.
    It is unlikely that this will work, because I'm pretty sure that the Apple Store would have tried this. You could try using expensive software to get files off the drive, but it would be risky and the results might not be any good.
    https://discussions.apple.com/docs/DOC-4273

  • For some reason I cannot import music from my hard drive to my iTunes library

    For some reason I cannot import music from my hard drive to my iTunes library, could you please help?

    See Repair security permissions for iTunes for Windows.
    Apply to the folder that you're failing to import from.
    tt2

  • Changed hard drive... How do I transfer from old hard drive to new hard drive

    hanged hard drive... How do I transfer from old hard drive to new hard drive.
    I have installed the new hardrive on my macbook and reinstalled the software... how do I transfer the information form the old drive to
    the new one.
    ?can I put the old drive in another macbook and connect via firewire???
    Thanks

    Put the old hardrive in an external hardrive case....like this...
    eshop.macsales.com/shop/firewire/on-the-go
    .....this is just an example their are less expensive models....

  • HT4914 if you use iTunes match in order to create space and remove music from your hard drive, does that happen automatically when you subscribe and upload your music or is there another step to remove the music from your hard drive once you've uploaded t

    if you use iTunes match in order to create space and remove music from your hard drive, does that happen automatically when you subscribe and upload your music or is there another step to remove the music from your hard drive once you've uploaded to iTunes match?

    Welcome to the Apple Community.
    iTunes match won't automatically remove content from your computer, if you want to do that you will need to do it manually yourself.

Maybe you are looking for

  • To run a java program via a batch file,when called from a web server

    REM This batch file runs the Spider with the [-v] option. REM Lines 51 through 54 are simple DOS commands..they call the Spider REM The location of the Spider package is the important piece of information here... REM a batch file has access to the wh

  • Problem with MIGO Transaction, while posting PO with quantities 0

    When I try to post a PO using MIGO, with one or more quantites 0, the output type is not appearing in VL03N. An output type "OPOD( Proof of Delivery)" will appear if all the quantities of the posted PO is greater than 0 !!    How can I resolve this ?

  • Calling method of a custom infotype from ABAP

    Hi Experts, I am working on an application where i need to call a method of a custom defined infotype. I have done this --> 1. Create a custom infotype 9111 2. SAP creates a class of that infotype ZCL_HRPA_INFOTYPE_9111 3. Inside this method there ar

  • Looking  for Sony A350 calibration profiles

    Light room 5.7 Raw file... I only see Adobe standard and ACR 4.4 in my profile pull down. I have downloaded Sony...Faithful landscape .dcp files and placed in ...Camera Raw/Camera Profiles/Adobe Standard folder but still not listing. How do I enable

  • Messages app moving on focus

    Safari (or any other app) open in foreground with Messages app behind then click on messages app to bring it to foreground then reply box moves the top of the messages app window to the relative position of my mouse when I click on the reply box. Any