How to reduce the number of Remote Gateway connections from one server

Hi ,
We have an XI 3.0 prod system which is being flooded every month end by the invoices generated in our ERP system and occupying all the gateway connections, what I see is that all the remote gateway connections are being established by our ERP server and still there are many requests waiting at the ERP server and failing.
When we ran the same in our test landscape, the invoices are getting transferred to XI with out any problems, the remote gateway connections are free even when the invocie Volumes transferred are the same in Prod and Test servers.
we are not considerint to Increasing the rdisp/max_gateways as the volumes of invocies transferred are really huge and in one of the test, we observed that when 40 invocies are transferred from ERP, it occupied 40 Remote gateway connections in our XI prod
We are looking for the option similar to our test system of transferring many requests from one connection. Is there any such specific option?
Regards,
Santhi Bushan.

Dear Santhi,
every gateway establishes only one connection to another gateway. If there are that many gateway/gateway connections, then you are probably connecting from more than one instance. You could circumvent this, if you use gateway options in the RFC destination being used, as this will force all outgoing RFC calls to go through a single gateway. This will then mean that the system has a single point of access.
Best Regards,
Tim

Similar Messages

Urgent HELP - How to reduce the number of entries in table MESYBODY?

Does anyone know how to reduce the number of records in synchronization table MESYBODY and MESYHEAD? The reason I wanted to reduce these tables is because I believe they have so many duplicated entries that causes extremely slow performance everytime we sync. Currently, there are almost 50,000 records for approximately 100 users, and I believe it shouldn't be that much.
We are running into a problem that it takes approximately 25-30 minutes to sync.
Any advices would be highly appreciated.
Regards,
Dai

Hi Dai,
please try to run the middleware job WAF_MW_MAPPING. For some applications (Mobile Time and Travel for example) this helps to clean the tables.
Br, alex
alexander ilg
http://www.msc-mobile.com

How to reduce the number of data blocks used by table

Hi,
I was trying to reduce the space usage of a particular table of my apex application which stores blob content and therefore deleted many records from it.
However, the data block usage remained the same as before.
I have tried to 'analyze' the table and validate the structure,but am unable to overcome this problem.
Could someone throw some light on what needs to be to reduce the number of data blocks used by this table?
Best Regards,
Priya Jetley

Priya:
It is likely that the BLOB content defined in your table is being stored 'Out-of-Line'. This means that the LOB columns are stored in segments of their own. These then are the segments that may need shrinking.
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14249/adlob_tables.htm#i1006363
Varad

How to reduce the number of bytes for a picture

I want to reduce the number of bytes used for a picture to be sent to a site like Ebay or craigslist. I son't see any options in Iphoto for this purpose.

You can do it in Preview.
Open the image in Preview. Under Tools, click Adjust Size.
Scale it down to the smallest acceptable size (the website should give a suggested resolution).
Then go to File -> Export, save it as a Jpeg.
Smaller size image means smaller file size.

Solaris 9/10 How to limit the number of SSH connexion(s) to a server?

Hi team
Anybody knows how should I proceed if I want to limit the number of simultanous SSH connexion on my server to 3 for example?
I have tried to edit /etc/ssh/sshd_config file and put line:
# The maximum number of concurrent unauthenticated connections to sshd.
# start:rate:full see sshd(1) for more information.
# The default is 10 unauthenticated clients.
MaxStartups 3:30:60
INSTEAD OF
MaxStartups 10:30:60
It does not work as more than 3 users are able to log in
Any clue?
Thanks in advance

$ man sshd_config
     MaxStartups
             Specifies the maximum number of concurrent unauthenticated con-
             nections to the SSH daemon.This configuration parameter only controls how many SSHd connections are allowed to be waiting around for authentication. Not how many simultaneous connections there can be overall. Unless you get a burst of connections, this parameter will have no effect.
There is no SSH parameter that will do what you want. It's possible there's a PAM module out there that would deny authentication if some number of established sessions appear to be running, but I'm not familiar with any in particular.
Darren

How to reduce the number of DB calls in Biztalk Map

Hi,
I am using the
1. first scripting Functoid(calling External Assembly) to fetch the details from DB as comma separated values(1,2,3)
2. Scripting Functoid to apply Inline XSLT temple(which will pick the comma separated value and place it as three different records)
Instance messages
All the items are working as expected but, the call to DB is happening for each record in the details.
if my input has n number of details section, the database call is happening n times, which is drastically reducing the performance.
I wanted to make it as one DB call . Please suggest
Regards, Vignesh S

Hi,
You can also use the Blogical BizTalk Database lookup functoid with caching feature.This functoid can be used like the
Database lookup functoid that ships with BizTalk. It will execute a query against a given database and cache the result using the
System.Web.Caching.Cache with a sliding expiration of one minute.
Download:
https://blogicalfunctoids.codeplex.com/
Kind regards,
Tomasso Groenendijk
Blog
| Twitter
MCTS BizTalk Server 2006, 2010
If this answers your question please mark it accordingly

How to reduce the number of exchange between the database & the app?

Hi,
In order to resolve performance issue of my application under a dirty network (ping=150ms), I make use of Ethereal.
And I noticed that an incredible amount of TCP exchanges (little SQL requests amoung others things) was complete between my application and the database.
Does exist a KODO or JDO parameter upon which I could work around in order to optimize these exchanges/SQL requests?
DB: Oracle 9.2.0.1 --
KODO: 3.3.3 --
Thanks a lot.
Mathieu, STERIA France
Message was edited by:
steria_fr
Message was edited by:
steria_fr

You can activate logging of every SQL being issued by Kodo by setting kodo.Log:SQL=TRACE.
Kodo issues SQL when the application accesses object fields/relations that are not yet loaded. Analysis of SQL would indicate what is being fetched. You can minimize the number of SQL, say, adding a set of fields in the same fetch-group thereby bringing them from database in a single SQ!L call.

How to get the number of issued active certifcates from a CA

Hi,
We have a PKI infrastructure still running on Windows Server 2003. How can I get the number of active certificates issued? I have used the filter option on the issued certifcates node listing the certificates with expiry date after the current
date, but this list only all the certs without the actual total number of certs.
Any help is appreciated
Thanks
Johan Marais
JkM6228

On Wed, 22 Jan 2014 08:57:59 +0000, Martin Rublik wrote:
certutil -config -view -out "Issued Distinguished Name" -restrict "Certificate Expiration Date > 22. 1. 2013" | findstr Rows
It will dump CA database look for issued distinguished name (name in the subject of the certificate) and outputs only certificates expiring after 22.1.2013. The output is piped to findstr command that filters the total number of rows.
There are a couple of problems with the above:
1. Not every certificate will have a Subject name.
2. This won't filter out certificates that have been revoked but are still
time valid.
3. I couldn't get the "findstr Rows" to return anything and when I look at
the help for findstr I don't see that as an option for the command.
This command worked for me, make sure you enter it all on a single line:
certutil -view -restrict "Disposition=20,NotBefore<January 22 2013" -out
SerialNumber | findstr /C:"Serial Number:" | findstr /r /n "^" | find /c :"
Also, if you copy and paste from this post into the cmd window, be careful
that the quotes and dashes don't get converted into the wrong type.
Paul Adare - FIM CM MVP
"for thing in $(fnord $(frob $(./gazonk foo bar baz bletch thud grunt)));
do
zot --wodchuck ${thing}; done"
-- Stig Sandbeck Mathisen making a point about the beauty of shell scripts

How to get the number of minutes or hours from date arithmetic ?

Thanks in advance,
I have two date fields that I would like to derive the number of minutes or hours via the following:
select start_date - end_date from dual;
How do I get HH:MM results ? Thanks

If greater than 24 hours you'll need to calculate the hours and minutes as numbers individually. (You can then display them in whatever format you choose)
SQL> ed
Wrote file afiedt.buf
1 with t as (select to_date('6-10-2008 08:00','DD-MM-YYYY HH24:MI') as from_dt, to_date('7-10-2008 12:30','DD-MM-YYYY HH24:MI') as to_dt from dual)
2 --
3 select from_dt, to_dt, to_dt-from_dt
4        ,to_char(trunc(sysdate)+(to_dt-from_dt),'HH24:MI') as hrs_mins
5        ,trunc((to_dt-from_dt)*24) as hrs
6        ,trunc((((to_dt-from_dt)*24)-trunc((to_dt-from_dt)*24))*60) as mins
7* from t
SQL> /
FROM_DT           TO_DT             TO_DT-FROM_DT HRS_M        HRS       MINS
06-OCT-2008 08:00 07-OCT-2008 12:30        1.1875 04:30         28         30
SQL>

How to reduce the size of a PDF file from a 10.26 MB to a 2.0 MB?

I have save my file using Adobe and converted it to a PDF file size 10.26MB but the file is too large....how do I reduce the size of the file to upload to a website?. It needs to be PDF size 2.0 MB

The free Reader can do nothing to shrink the files. Acrobat can reduce them somewhat but I think that not to the extent that you want, although it can also separate them in smaller files. Depending on the specific files, it may be better to reduce them in the originals from which the PDFs were made; for example, by lowering the resolution of images.

Is it possible to limit the number of remote panel connections to a vi?

Hello,
I have an application running on a RT PXI and I'm using remote panel to access it. My licence allows me to have multiple remote connections and it's ok as I sometimes need to open multiple remote panels at the same time. However, I would like to limit the number of connections to 1 for a particular VI. Is it something that can be done?
Regards,
Patrick Lessnick
Solved!
Go to Solution.

Patrick: If you right click on your target PXI system in the project exporer, select Properties>Web Server>Browser Access you can select who you let have access to your VIs. Likewise, in the Visible VIs section of Web Services you can limit which of your VIs you want people to be able to see.
If this isn't enough control, from your run time application on the PXI system you can write a startup VI (in parallel with your main application) to monitor the Remote Panel: Connections to Clients Property of the real time server. Once this monitor application sees a connection you can take any number of actions to prevent more than one connection, deny access to specific IP ranges or what have you.
I am assuming you are using LabVIEW 2009 and MAX 4.6.1 but it may apply to earlier editions.
Hope this helps.
Bill

How to check the number of active jdbc connections

hi all,
i'm creating a connection from Java using java.sql.Connection class and with oracle thin drivers. connection is creating properly.
now, i want to know how many connections are created, through the sql query. i forget the query.
its helpful for me.
regards
pavan.

Your requirements are a bit vague - the only place to accurately determine the number of connections is in Oracle using the V$SESSION virtual view.
It can tell you the number of session (active or idle) made from the platform running that Java code. It can also tell you basic session information like the current SQL (if active) that is being executed.
There are numerous other V$ views that can be used in conjunction to build a very accurate picture of what the session is doing and what resources it is using.
Details are in the Oracle® Database Reference manual. On-line copies of all manuals available via http://tahiti.oracle.com

How to confg the number ranges i.e started from an alphabet

number rages started froman alphabet
ex:aa123...... for an production order

Hi,
You need to define the order type for a production orders in tcode opjh
For this order type you need to define the number ranges as external number range.
The defined number ranges should not overlap with the existing ones
Reward points if useful
Regards,
nandha

HOW TO GET THE SELECTED VALUE IN A ROW FROM ONE VIEW TO ANOTHER VIEW?

hi all,
I have a small issue.
i have created two views.In the table of the first view i'm selecting a row and pressing the button it will move to next view.
i am adding some fields manually in the table of the second view and pressing the save button.Here all the values should get updated corresponding to the field which i have selected in the first view.
I want to know how to get the particular field in the selected row from one view to another view.
Kindly help me.

Hi,
Any data sharing accross views can be achiveved by defining CONTEXT data in COMPONENT CONTROLLER and mapping it to the CONTEXT of all the views. Follow the below steps.
1. Define a CONTEXT NODE in component controller
2. Define same CONTEXT NODE in all the views where this has to be accessed & changed.
3. Go to CONTEXT NODE of each view, right click on the node and choose DEFINE MAPPING.
This is how you map CONTEXT NODE and same can be accessed/changed from any VIEW or even from COMPONENT CONTROLLER. Any change happens at one VIEW will be automatically available in others.
Check the below link for more info regarding same.
[http://help.sap.com/saphelp_nw04s/helpdata/EN/48/444941db42f423e10000000a155106/content.htm]
Regards,
Manne.

How to reduce the number of crossjoin in my webi query

All,
I am running some publication base of a webi report
notes that i have a profile for each of the recipient
for example in the profile i have a detail objects with:
recipient 1 can only see 901
recipient 2 can only see 902
In my publication I do the filtering on the local personalization
then I sent the report to all the user concerned using the multi pass option in the advanced part.
The thing is that for some of the recipient I do reach the limit:
more than i million cell
notes it generate around 21 crossjoin in the MDX
My first question is .. if I follow the best practice:
and to confirm:
1 - cut the webi query in 2 queries one for the display attributes and another one for the actual data .. the thing is I do not have much display attributes in my query will that really help ?
2 - I believe putting a where clause in my MDX will save me some crossjoint .. but in my case I am not sure on how to put a filter that could be after used thru a profile in a publication
Any idea ?
thank you
here is the MDX: you will see the condition on
[0CUST_SALES__ZC_REPNM].[0000900014]
SELECT { [Measures].[4DEE5JCFWBL7C5ESCAY7EYPVO], [Measures].[4DEE7737DGFO7GOHQ55PM8QDG], [Measures].[4DEE7FERWXYBDVR01PP0IDCAS], [Measures].[4DEE7FMGFWK0WIAG7JRCSFB0K], [Measures].[4DEE9N7KWFHEW1SWO20KYS03O], [Measures].[4DEE9NF9FE34EOCCTW2X8TYTG], [Measures].[4DD95OV9NOMZWKDZ1W3LBZ7US], [Measures].[4DD95P2Y6N8PF6XF7Q5XM16KK], [Measures].[4DD95PAMPLUEXTGVDK89W35AC], [Measures].[4DD95PIB8KG4GG0BJEAM65404], [Measures].[4DD95PPZRJ1TZ2JRP8CYG72PW], [Measures].[4DD95PXOAHNJHP37V2FAQ91FO], [Measures].[4DD95Q5CTG990BMO0WHN0B05G], [Measures].[4DD95QD1CEUYIY646QJZACYV8], [Measures].[4DD95QKPVDGO1KPKCKMBKEXL0], [Measures].[4DD95QSEEC2DK790IEONUGWAS] } ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [0CALMONTH2].[LEVEL01].MEMBERS, { [0CUST_SALES__ZC_REPNM].[0000900014] } ), [ZC_RGBRND__ZC_INDSUP].[LEVEL01].MEMBERS ), [ZC_RGBRND__ZC_INDMGT].[LEVEL01].MEMBERS ), [0CUST_SALES__ZC_TLSAGT].[LEVEL01].MEMBERS ), [0CUST_SALES__ZC_CHIER5].[LEVEL01].MEMBERS ), [0DISTR_CHAN].[LEVEL01].MEMBERS ), [0SHIP_TO__ZC_TLSZCL].[LEVEL01].MEMBERS ), [0SHIP_TO__ZC_PRIORT].[LEVEL01].MEMBERS ), [0SHIP_TO__ZC_OUTLTP].[LEVEL01].MEMBERS ), [0MATERIAL__ZC_GENMAT].[LEVEL01].MEMBERS ), [0SHIP_TO__ZC_KEYACC].[LEVEL01].MEMBERS ), [0SHIP_TO__0CITY].[LEVEL01].MEMBERS ), [ZC_CONTGR].[LEVEL01].MEMBERS ), [ZC_BRND__ZC_BRNDFM].[LEVEL01].MEMBERS ), [ZC_BRND].[LEVEL01].MEMBERS ), [0MATERIAL__ZC_PACKSZ].[LEVEL01].MEMBERS ), [0MATERIAL__ZC_CONCAT].[LEVEL01].MEMBERS ), [0CUST_SALES__0SALES_OFF].[LEVEL01].MEMBERS ), [0SHIP_TO].[LEVEL01].MEMBERS ), [0CUST_SALES__0SALES_GRP].[LEVEL01].MEMBERS ), [0CUST_SALES__0CUST_GRP1].[LEVEL01].MEMBERS ) DIMENSION PROPERTIES [0CUST_SALES__ZC_CHIER5].[20ADDR_NUMBR], [0CUST_SALES__ZC_CHIER5].[20PHONE], [0CUST_SALES__ZC_CHIER5].[20STREET], [0CUST_SALES__ZC_REPNM].[20CUST_SALES__ZC_REPNM], [0MATERIAL__ZC_GENMAT].[1ZC_FORMCO], [0SHIP_TO].[20CITY], [0SHIP_TO].[20PHONE], [0SHIP_TO].[20SHIP_TO], [0SHIP_TO].[20STREET], [ZC_BRND].[1ZC_DOMIMP] ON ROWS FROM [ZIM_WKLY/ZQ_BO_ZIMWKLY_001]
[ZIM_CRM01/ZQ_BO_ZIMCRM01_0001]

Hi,
The recipient in my case are sales rep, they are not part of SAP , they just have a number ( key) to identify them.( we created one user ID for each of the sales rep in BOBJ)
in the case of our publication it is very easy to setup .. we just have to put the key that identify them within one big profile. and the result would be a condition in our webi report.
so in short setting up the security in SAP would have been too much work
Philippe
Notes that the goal is to broadcast on their PC a wid file, they will open it on their own laptop when facing their customer. notes they would open the wid file in an offline mode

How to reduce the number of Remote Gateway connections from one server

Similar Messages

Maybe you are looking for