How to refresh AdvancedDataGrid in flashbuilder 4, getting data from webservice
I have tried many things like below to get my grid updated when it gets data from webservice ,
myGridName.ValidateNow(),
myGridName.InvalidateList(),
if(myGridName.updateCompletePendingFlag)
the problem is I have two buttons that can show hourly, and daily data in one grid, when activating daily button, I got the data in the grid but with delay of maybe 2 to 5 seconds(to get data from webservice) and within this period if user clicks on hourly button, to see the hourly data, then user will see the daily data attached to the end of the hourly data in the grid, please notice that there is just one grid. the problem is I don't know how much to wait for the first set of data to show up on the grid (daily data) and then enable all other buttons so user can only just choose Hour button when all the daily data has been shown in the grid, so when user click on hour button, the daily data will not attached to the end of hourly data in the grid.
any help is appreciated
Thanks for the answer,
I do disable other controls when one of the buttons are clicked and waiting for the data, and in my retrieved data function from webserver , at the very end after I retrievd all the data from webserver and add it to the dataprovider of the grid, I enable all the controls, but the problem is in reality , I see that all other controls are enabled sooner than I see the data show on the grid, and because of that user can think there is no data in the grid and click on the hour buttons , causing that the daily data to be attached to the hourly data in one grid.
I appreicate if you could still help me
Similar Messages
-
How to configure RBE in order to get data from a SAP System
Dear all,
I downloaded the last version of RBE in order to install it and evaluate the concept of Reverse Business Engineering.
After installing it on my laptop, I try to access with no exit. It appears a log on screen.
Someone can help me by explaining how to set first steps in order to connect with a system?
Thanks in advance, XavierHi Gopi,
Here I enclose the steps for sending data from a SAP R/3 system to Non-SAP R/3 thru ALE.
Here my Non SAP System is - Web Methods.
1.Creating LS - 1. SAP R/3 - S1_800
2. web methods LS - WM_800
2. ASSIGN CLIENTS TO LS - S1_800 TO 800
3. DEFINE TARGET RFC DESTINATIONS -
3.1. TCP/IP Connection - RFC DEST NAME -WM_800
Connection Type - T
Applicataion Type - Registered server proggram
PROGRAM ID - WMB2B1
Gateway Host - Sap Server Name
4.0. Model View Name - W_M_V (for sending data to IS)
sender - S1_800
receiver - WM_800
message type - MATMAS
4.1. Create Partner Profiles.
5. Create PORT - TCode - we21
5.1. For Wem Methods system - WM_PORT
RFC Destination Name - WM_800 (created in step 3.1.)
With Regards
Vasu -
How to refresh the current page when retrieving data from database
hi all
in my application i want to navigate from different tables to different forms. The data in the table and in the forms is comming fromthe database. when i select a navigation link to database of a form it is connecting to database. so im manually refreshing the refresh button of I.E. which is big headache. so is there any way to refresh my current table or form dynamically at run time to retrieve from database
Thanks and regards
khajaHi,
Refreshing a connection to Database means re establishing your connection each time.It will be load for the DB to load the data every time generally not advisable to do.
Inorder to get the value from the DB you have load the driver and connect it using fireplug with the view for navigations.
for the same refer this link.
http://help.sap.com/saphelp_erp2004/helpdata/en/51/2c747ecd037842943bdb38be214719/frameset.htm
Hope it helps.
Rdgs,
Guru -
Get data from file in server to client and vice versa
after greeting
i really didn't know how to use socket and serversocket to get data from file in the server and display it to client.
also read file from client and save it to server.
really i didn't know how to do it.
really i want the reply as soon as possibleYou REALLY need to work through the Java networking tutorials:
http://java.sun.com/docs/books/tutorial/networking/index.html -
Hi ,
I have a site that runs on Claims Mode ( NTLM) . That site has a web part that needs to show the data from any sharepoint farm, SharePoitn 2010 , or 2007 or 2003.
I am getting 401 unauthorized when I try to get data from webservice running in sharePoint context.
But when I run the same code in Windows Console application then it is giving no error.
What I doubt is that this issue is due to the reason that I have set
claims mode authentication.
Because same code is running in different farm in a site that is configured using windows authentication.So generally speaking, you're talking about a VERY long running topic of authentication methods... and generally speaking, in the world of Windows, the only long running authentication options have been:
- NTLM (limited to one hop)
- Kerberos (unlimited hops)
- Application level authentication (ex: SQL auth, also, no hops)
Recently, Microsoft has been investing in Claims Based Auth... and I fully expect claims to start working their way into other systems (previously starting to work into Windows via the CardSpace technology, but also in other ways such as Win8's ability to
log in with a LiveID)... but building a new authentication method into ALL applications is a VERY long process, and the complexity of claims adds a LOT of consideration (claims from the same AD can look VERY different depending on the STS, so lots of questions
around things like bridging claims).
So as far your SP auth needs...
IF both applications are CLAIMS AWARE, then you MAY be able to use claims (which support unlimited hops)... but that's just not very likely yet (and will probably take another 5-10 years to be available across the entire enterprise)... otherwise, KERBEROS
Outside of the Microsoft world... KERBEROS is open spec, so is supported by other systems (such as authenticating to linux)... claims based auth is also open spec, but again, still new... there are a few other options (LDAP, etc), but none that are native
to Windows (so you rely on things like third party auth modules for Windows, which Novell has done for DECADES with NDS and eDir)
And again, SharePoint can convert claims to Kerberos using the C2WTS... which MS uses internally for things Excel Services connecting to a backend SQL server... but it DOES require the Kerb and C2WTS configuration.
if you're having issues using Kerb auth... then it sounds like Kerb isn't configured correctly... and Kerb is a PAIN to configure (whitepaper for SP Kerb is ~100 pages long)... IIS (and SharePoint) also has the added benefit of failing over to NTLM if Kerb
fails (and you shouldn't disable this behavior, since it'll break other settings elsewhere)
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs -
Powerpivot Error on Refresh -- "We couldn't get data from the data model..."
I'm using Excel 2013 and Windows 8.1. I have a spreadsheet I've been using for over a year, and I've just started getting this error message when I try to refresh the data.
"We couldn't get data from the Data Model. Here's the error message we got:
The 'attributeRelationship' with 'AttributeID' - 'PuttDistCat9' doesn't exist in the collection"
Any idea how I can fix this problem? I haven't changed anything related to that particular attribute. All the data is contained in separate sheets in the workbook, so there are no external sources of data.
Thanks.
JeanThanks for all the suggestions.
I found a slightly older version of the spreadsheet that still refreshes properly, so I don't think I have any issues with the version of Excel or Power Query. (I've had this same error before, and I believe I applied the hotfix at that time.)
I think this problem started after I updated a number of the date filters in the pivot tables. I haven't made any changes to the data model, and the only updates I've made were to add data (which I do all the time), and to change the date filters on
the pivot tables.
As suggested, I added a new pivot table querying one table (the table with the attribute that shows up in the error message), and it worked fine. I can also refresh this pivot table.
Then I tried adding a pivot table which went against several tables in the data model (including the table in question). The pivot table seemed to return that data properly. However, when I tried to refresh it, I got the same error message ("we
couldn't get data from the data model...").
Dany also suggested running the queries one at a time to see which one is in error. Without checking all the pivot tables, it appears that any which use the table "HolePlayedStrokes" generate the error (this is the table with the attribute
mentioned in the error message). Pivot Tables without that particular table seem to refresh OK. Unfortunately, that is the main table in my data model, so most of the pivot tables use it.
Any other suggestions? I'd be happy to send a copy of the spreadsheet.
Thanks for all the help.
Jean -
How to get data from subsites list of SharePoint 2010 in ssrs
Hi,
Can someone help me on this issue.
I want to create a report using ssrs, I have some of the data in SQL and some of the data in sharepoint list.
First I need to go to SQL and get the data from the table which contains URL for the subsite in sharepoint.
after that I need to go to all the subsites and go to perticulat list in the subsites and get data from that list.
for example, their is a top level site "abc"
it contains sub site "123", "456","567", etc.. All this sub sites contain a list by name "Sample List", Now I need to go to that sub site list(Sample List) and get list-item column say "created By" which
is created on particular date.
in my report, I need to print the sub site "url/Title" which comes from SQL database and list-item column "Created By" of that sub site list "Sample List".
I tried using subreport inside a report by using "Microsoft SharePoint List" as a datasource, but when it comes to real time we don't know how many subsites will be created, so we can't create a datasource for each subsite site.
I guess we need to be using XML as a datasource, but how can we go to particular subsite in query while using XML, since all subsites have list with the same name ?
I appreciate your help.
Thank you,
KishoreHi Kishore,
SQL Server Reporting Services(SSRS) supports expression-based connection strings. This will help us to achieve the goal you mentioned in this case:
Create a new report
Create a Data Source in the report with the connection string like this:
http://server/_vti_bin/lists.asmx (We use static connection string instead of expression-based connection string now, as it is not supported to get fields based on expression-based connection string in design time. We will change it to be expression-based
connection string later)
Create the data set(as you have done using XML query language). Please use list name instead of GUID in the listName parameter.
Design the report(e.g. Add controls to the report)
Now, let's change the connection string to be expression-based. First, please add a parameter to the report, move this parameter to top. This parameter is used to store the sub site name.
Open the Data Source editor, set the connection string to be: ="http://server/" & Parameters!parameterCreatedInStep5.value & "_vti_bin/lists.asmx"
In the main report, pass the sub site name to the report we created above via the parameter created in step5
That is all.
Anyway, this is actually a SQL Server Reporting Service(SSRS) question. You can get better support on this question from:
http://social.technet.microsoft.com/Forums/en/sqlreportingservices/threads
For more information about Expression-Based connection string, please see:
http://msdn.microsoft.com/en-us/library/ms156450.aspx#Expressions
If there is anything unclear, please feel free to ask.
Thanks,
Jinchun Chen
Jin Chen - MSFT -
How can I get Data from the Sound cart in Labview? Does a VI exist?
How can I get Data from the Sound cart in Labview? Does a VI exist?
Yes, there are VIs for acquiring data from Sound cards. And examples too. If you don't have LabVIEW yet, do a search on NI's site for example VIs.
Khalid -
How can i get data from another database SQL Server use database link from
I have a database link from Oracle connect to SQL Server database with user cdit connect default database NorthWind.How can I get data from another database(this database in this SQL Server use this database link)?
hi,
u should see following documentation:
Oracle9i Heterogeneous Connectivity Administrator's Guide
Release 1 (9.0.1)
Part Number A88789_01
in it u just go to chapter no. 4 (using the gateway),,u'll find ur answer there.
regards
umar -
How to get data from Oracle using Native SQL in SAP.. Problem with date
Hi Masters.
I'm trying to get data from an Oracle DB. I was able to connect to Oracle using tcode DBCO. The connetion works fine
I wrote this code and it works fine without the statement of where date > '01-09-2010'
But i need that statement on the select. I read a lot about this issue, but no answer.
My code is (this code is in SAP ECC 6.0)
DATA: BEGIN OF datos OCCURS 0,
id_numeric(10),
component_name(40),
comuna(10),
record_id(10),
status,
sampled_date(10),
END OF datos.
DATA: c TYPE cursor.
EXEC SQL.
connect to 'LIM' as 'MYDB'
ENDEXEC.
EXEC SQL.
SET CONNECTION 'MYDB'
ENDEXEC.
EXEC SQL PERFORMING loop_output.
SELECT ID_NUMERIC, COMPONENT_NAME, COMUNA, RECORD_ID, STATUS, SAMPLED_DATE
into :datos from lims.SAMP_TEST_RESULT
where date > '01-09-2010'
ENDEXEC.
EXEC SQL.
disconnect 'MYDB'
ENDEXEC.
How can i get the data from that date?? If i delete the where statemet, the program works well, it takes 30 mins and show all the data, I just need the data from that date.
Any help
RegardsPlease refer the example in this link which deals with Oracle date format.
You can finnd a command DECODE which is used for date formats. If you have a look at whole theory then you will get an idea.
Link:[Bulk insert SQL command to transfer data from SAP to Oracle|http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bulk-insert-sql-command-to-transfer-data-from-sap-to-oracle-cl_sql_connection-3780804] -
How do i get data from a structure using join?
hi,
what is the actual use of a structure.?
my problem is :
KUAGV is an existing STRUCTURE. it has got one fields each which links to MARA, AND VBKD tables. i want to fetch all related information from KUAGV, mara, vbkd . which is the better way : using joins or views or anything else? how do i
get data from a structure using join?structure temporarily holds any data passed to it dynamically throughout the runtime but doesnot store it permanently. so
a structure cannot be included in a join.so instead of incuding structure KUAGV's field in a join
search the transparent table in which same field are present and use it in join.
A structure if created in DDIC(Data Dictionary) is a global DATA STRUCTURE which is used to group related information, for example you would group all the details of your bank account into a structure BANK_ACCOUNT that contains fields like account_Id, account_holder_name etc.
If you create a structure in your program then it is local to your program. So you use this structure to create data holders of this DATA TYPE to hold data in your program.
Edited by: suja thomas on Feb 11, 2008 6:24 AM
Edited by: suja thomas on Feb 11, 2008 6:31 AM -
Hi every body..
I 've a problem .....
I've an old program work on "DOS" and it's content database which content all Data that i need for that program
The data file extension with ".FD" , ".VW" , ".LSS" & "SLP"
I want to kow:-
1) what is that database system
2)What program could open or can get data from that database tables.
3)can i do that with oracle...
please describe every thing in details...
... Please replay quickly... urgently
...waiting your answer....You're probably better off consulting the documentation for the DOS program you're trying to deal with than hoping someone here will be able to guess what program you're using, identify the structure of the files, and tell you how to extract the data into something Oracle can import.
Justin -
How to get data from a table in a condition between twomonth
hai friends
I have a query that is i want to get data from a table based on a condition between two months in a format of char column
Ex
I have a column called from_month in the format of 'mon/yyyy'(already converted from date')
then the second column is to_month in the same format 'mon/yyyy'
now i wiil select from_month and to_month like
from month jan/2009
to month mar/2010
how to use between of two months in the format of char.Please tell me how to get two different month between data.Hi,
This may be of help.
Remember Pointless has made a point ;) (worth millions)
If possible , DO NOT store dates as strings or numbers.Let dates be dates.
WITH dat AS
(SELECT ' THIS IS JAN' x,to_char(to_date('01-JAN-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS FEB' x,to_char(to_date('01-FEB-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS MAR' x,to_char(to_date('01-MAR-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS APR' x,to_char(to_date('01-APR-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS MAY' x,to_char(to_date('01-MAY-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS JUN' x,to_char(to_date('01-JUN-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS JUL' x,to_char(to_date('01-JUL-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS AUG' x,to_char(to_date('01-AUG-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS SEP' x,to_char(to_date('01-SEP-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS OCT' x,to_char(to_date('01-OCT-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual UNION
SELECT ' THIS IS NOV' x,to_char(to_date('01-NOV-2009','DD-MON-YYYY'),'mon/yyyy') y FROM dual)
SELECT * FROM dat
WHERE to_date(y,'mon/yyyy') BETWEEN to_date('01 jan 2009','dd mon yyyy') AND to_date('01 mar 2009','dd mon yyyy')Cheers!!!
Bhushan -
How can i get data from a maintance view?
Hi all.
Can you give me some suggestion about 'How can i get data from a maintance view?'?
Thanks
Best regardhi
good
go through this link
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ecdf446011d189700000e8322d00/content.htm
thanks
mrutyun^ -
How to get data from a file?
Hello everyone, i'm new to this forum and to java too. Ok, so here is what i want to do:
I want to get data from a file containing words and numbers and store them into variables that i will use them after to insert into a database table. For example i have a file called employees.txt in this form:
eid ename zipcode Hire_date
1000 "Jones" 67226 "12-DEC-95"
In C++ i declare variables for each data and store them, for example in this case:
ifstream in("somefile");
string name, hdate;
int eid, zip;
in >> eid >> ename >> zip >> hdate;
So i want to do the same thing in JAVA but i can't make it work. So, i would appreciate if someone could give me a simple example how to do it. Thank you.[http://java.sun.com/docs/books/tutorial/essential/io/index.html]
Maybe you are looking for
-
How many computers can I download my Adobe Cloud to?
I was wondering how many Computers I can download my Adobe Cloud to?
-
How to activate hotspot in iphone 4S
How to activate hotspot in iphone 4S. I am using BSNL Network in India
-
HT204476 So where are my original photos?
What happens if I do delete my original IPhoto library after I migrate to Photos? Will I still be able to access my photos through IPhoto? This is the absolute worst rollout of a new program I have ever experienced at Apple. Events are also missing f
-
I have a problem please help me
I have been installed adobe premiere pro cs6 successful but when i open it the program show me this massege " Adobe Premiere pro CS6 could not find any capable video play modules . Please update your display drivers and start again . " please tell ho
-
Mail application hangs at start
Hi, hoping for some help. This morning my mail application stopped responding. The application launched, but never got any further than the Inbox window. The application did not respond to mouse or keyboard, and I had to force quit to exit. The ap