How to refresh the updated R/3 Hierarchy in BW

Hi Guys,
Could you please let me know the generic procedure about updating the R/3 hierarchy in BW?
Regards,
Sagar

Dear Fellas,
I am still stuck on the issue which i have asked below. Let me reitirate the issue that I am facing.
There are 4 hierarchies on 0COSTELMNT infoobject. I am trying to load one of the hierarchy (ex:XYZ), this hierarchy is maintained on the R/3 side and i could clearly see it being maintined under transaction KAH3.
Now when i try to load it to BW by creating an IP the hierarchy XYZ doesn show in the Hierarchy selection tab of the IP. I tried the option of refreshing the list of available hierarchies on the R/3 side also. even then the required hierarchy is is not showing.
Please help.
Regards,
Sagar

Similar Messages

How to refresh the data in a container and to update the new data

Hi,
I have created a Module Pool Program in which i have two containers to display the long text.
Initially this container is filled and based on some condition i want to update the text in the same conatiner.
I am using the below two classes to do all this.
cl_gui_textedit,
cl_gui_custom_container,
Could someone help me how to remove the long text in the container and update the new long text.
I am getting the new long text but not able display it in the same container. Please someone help me how to refresh and update the container.
Thanks in advance.

Hi
Try this.
IF cl_gui_textedit IS INITIAL.
create control container
    CREATE OBJECT cl_gui_custom_container
       EXPORTING
            container_name = 'Container Name''
       EXCEPTIONS
            cntl_error                  = 1
            cntl_system_error           = 2
            create_error                = 3
            lifetime_error              = 4
            lifetime_dynpro_dynpro_link = 5.
create text_edit control
    CREATE OBJECT cl_gui_textedit
       EXPORTING
            parent = cl_gui_custom_container
            wordwrap_mode = cl_gui_textedit=>wordwrap_at_windowborder
            wordwrap_to_linebreak_mode = cl_gui_textedit=>false
       EXCEPTIONS
            error_cntl_create      = 1
            error_cntl_init        = 2
            error_cntl_link        = 3
            error_dp_create        = 4
            gui_type_not_supported = 5.
ENDIF.
*--use method to set the text
CALL METHOD cl_text_edit->set_text_as_stream
    EXPORTING
      text            = t_lines ( Internal table with long text).
    EXCEPTIONS
      error_dp        = 1
      error_dp_create = 2
      OTHERS          = 3.
regards,
Raghu.

How to refresh the ALV Tree

Hi,
I have an ALV Tree report developed using the OOPS. In my ALV Tree output, I have some buttons which will update the database after clicking. The data is correctly updating in the database. But, it is not getting updated in the ALV Tree display. That means, it is not REFRESHing the ALV Tree display. We have to again execute the program in order to see the updated output.
Could anyone please suggest me how to Refresh the ALV Tree display..?
We can't use the method 'REFRESH_TABLE_DISPLAY' as it is a PRIVATE method is the class CL_GUI_ALV_TREE.
Please share your valuable thoughts.
Thanks & Regards,
Paddu.

Hi paddu.
please check out the link mentioned below,this will help u.
How to Refresh data on ALV tree
Regards
Theres

How to use the updated value in the same update statement

Hello,
I just wonder how to use the updated new value of other column in the same udpate statement. I am using Oracle 11.2, and want to update the two columns with one update statement as following:
create table tb_test (id number(5), tot number(5), mon_tot number(5));
update tb_test set (tot = 15, mon_tot = tot *15) where id = 1;
...I would like to update both tot and mon_tot column, the value of mon_tot shall be determinted by the new value of tot.
Thanks,
Edited by: 939569 on 1-Feb-2013 7:00 AM

Edit: example added
SQL> create table tb_test
2 ( id number(5)
3 , tot number(5)
4 , mon_tot number generated always as (tot*15) virtual
5 );
Table created.
SQL> insert into tb_test (id, tot) values (1, 5);
1 row created.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1          5         75
1 row selected.
SQL> update tb_test
2 set    tot = 15
3 where id = 1;
1 row updated.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1         15        225
1 row selected.

How to refresh the textedit object in module pool

Hi All,
I would appreciate if anybody can solve my problem.
Problem is i have created one TEXTEDIT and now when user clicks on the cancel button and come back to the screen the data which was previously entered is still coming up.
Please tell me how to refresh the data in TEXTEDIT.

actualy it is enough to do the following, assuming you have a container to put the textedit into it:
DATA: l_parent_container TYPE REF TO cl_gui_custom_container,
 l_obj_editor TYPE REF TO cl_gui_textedit, "make this a global variable
 l_text_table TYPE re_t_textline,
 l_itftext TYPE STANDARD TABLE OF tline,
 l_thead TYPE thead.
l_parent_container = ... "your container
move .... to l_thead... "your text header to read or reread
read text from SO10
CALL FUNCTION 'READ_TEXT'
 EXPORTING
 id = l_thead-tdid "Text-ID
 language = l_thead-tdspras "im_request-language?
 name = l_thead-tdname "TDIC Text-Name
 object = l_thead-tdobject "Texte: Anwendungsobjekt
 TABLES
 lines = l_itftext
 EXCEPTIONS
 id = 1
 language = 2
 name = 3
 not_found = 4
 object = 5
 reference_check = 6
 wrong_access_to_archive = 7
 OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
convert itf text to stream text (SAPSCRIPT_DEMO_NOTE_EDITOR)
CALL FUNCTION 'CONVERT_ITF_TO_STREAM_TEXT'
 TABLES
 itf_text = l_itftext
 text_stream = l_text_table.
IF l_obj_editor IS INITIAL.
 CREATE OBJECT l_obj_editor
 EXPORTING parent = l_parent_container. " Abstract Container for GUI Controls
ENDIF.
discard any previous changes
l_obj_editor->set_textmodified_status( cl_gui_textedit=>false ).
übertragen text in editor
CALL METHOD l_obj_editor->set_text_as_stream
 EXPORTING
 text = l_text_table
 EXCEPTIONS
 error_dp = 1
 error_dp_create = 2.

How to display the updated data from db to user interface in sruts framewor

A beginner in this area, I have been able to read a record from a
MySQL database and populate in jsp form . Now, my goal is to
allow the user to edit the contents of the form and then update the
record in MySQL and then display the same in jsp. page
The scenario in detail
1)the data is fetched from db and displayed in non-editable format
2)Next button is clicked
3)Now in the same jsp page I view the same data from db in editable format
4)The user is allowed to change the information
5)Now update button is clicked
6)the records are updated in the db -Finished doing till this step
7)But the updated info in non - editable format to be displayed in jsp page is left pending.
Here is my code for jsp,i want know how to write an action for this,tried doing the same in java and I'm successful.but what I need is how to fetch the updated information in the user interface.
I've made both editable as well as non editable info in the same page with different actions.
pl help me,I'm a newbie
<%@ taglib uri="/WEB-INF/struts-bean" prefix="bean" %>
<%@ taglib uri="/WEB-INF/struts-html" prefix="html" %>
<%@ taglib uri="/WEB-INF/struts-logic" prefix="logic" %>
<%@ page language="java" %>
<%@ page import="java.util.ArrayList,java.util.Iterator" %>
<%@ page import="com.finocus.common.container.CustomerDetailsTest;" %>
<html:html>
<head>
 <title>CUSTOMER DISPLAY</title>
</head>
<body>
 <table width="100%" bgcolor="darkkhaki">
 <tr>
 <td><table width="100%" bgcolor="indigo">
 <tr>
 <td>Display</td>
 <td>Update</td>
 <td>Verify</td>
 <td>Confirm</td>
 </tr>
 </table>
 </td>
 </tr>
<%
 //Container for holding data
 ArrayList list = (ArrayList)session.getAttribute("CUSTOMERDETAILS");
 Iterator itr=list.iterator();
 while(itr.hasNext())
 CustomerDetailsTest cust = (CustomerDetailsTest) itr.next();
 System.out.println("testGetCustomerDetails()-successed. retrieved CustomerDetailsTest="+cust.toString());
%>
<%
 //Session for checking whether edit or non-edit mode
 String pageMode = (String)session.getAttribute("CUSTOMER_PAGE_MODE");
 session.removeAttribute("CUSTOMER_PAGE_MODE");
 if(null==pageMode)
 pageMode = "EDIT";
 if(pageMode.equals("EDIT"))
 //display data in the form
 System.out.println("Editable mode");
%>
 <html:form action="/nonedit">
 <tr>
 <td><table width="100%" bgcolor="darkkhaki">
 <tr>
 <td><bean:message key="label.id"/></td>
 <td><%=cust.getCusId()%></td>
 </tr> 
 <td>
 
 <bean:message key="label.Company"/>
 </td> 
 <tr>
 <td><bean:message key="label.cname"/></td>
 <td><html:text property="name" value="<%=cust.getCname()%>"/></td>
 <td><bean:message key="label.cphone"/></td>
 <td><html:text property="phone" value="<%=cust.getCphone()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr1"/></td>
 <td><html:text property="address1" value="<%=cust.getCaddress1()%>"/></td>
 <td><bean:message key="label.cemail"/></td>
 <td><html:text property="email" value="<%=cust.getCemail()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr2"/></td>
 <td><html:text property="address2" value="<%=cust.getCaddress2()%>"/></td>
 <td><bean:message key="label.cfax"/></td>
 <td><html:text property="fax" value="<%=cust.getCfax()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.ccity"/></td>
 <td><html:text property="city" value="<%=cust.getCcity()%>"/></td>
 <td><bean:message key="label.czip"/></td>
 <td><html:text property="zip" value="<%=cust.getZip()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.cstate"/></td>
 <td><html:text property="state" value="<%=cust.getCstate()%>"/></td>
 </tr> 
 <td>
 
 <bean:message key="label.Admin"/>
 </td> 
 <tr>
 <td><bean:message key="label.AAname"/></td>
 <td><html:text property="adminname" value="<%=cust.getAname()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAemail"/></td>
 <td><html:text property="adminemail" value="<%=cust.getAemail()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAphone"/></td>
 <td><html:text property="adminphone" value="<%=cust.getAphone()%>"/></td>
 </tr> 
 <td>
 
 <bean:message key="label.User"/>
 </td> 
 <tr>
 <td><bean:message key="label.AUname"/></td>
 <td><html:text property="adminusername" value="<%=cust.getUname()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AUemail"/></td>
 <td><html:text property="adminuseremail" value="<%=cust.getUemail()%>"/></td>
 </tr> 
 <tr align="center">
 <td><html:cancel value="Cancel"/>
 <html:submit value="Next"/></td>
 </tr>
 </html:form>
<%
 }else
 //display data in the text
 System.out.println("Non-Editable mode");
%>
 <html:form action="/edit">
 <tr>
 <td><table width="100%" bgcolor="darkkhaki">
 <tr>
 <td><bean:message key="label.id"/></td>
 <td><%=cust.getCusId()%></td>
 <td><bean:message key="label.status"/></td>
 <td><%=cust.getStatus() %></td>
 </tr> 
 <td>
 
 <bean:message key="label.Company"/>
 </td> 
 <tr>
 <td><bean:message key="label.cname"/></td>
 <td><%=cust.getCname()%></td>
 <td><bean:message key="label.cphone"/></td>
 <td><%=cust.getCphone()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr1"/></td>
 <td><%=cust.getCaddress1()%></td>
 <td><bean:message key="label.cemail"/></td>
 <td><%=cust.getCemail()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr2"/></td>
 <td><%=cust.getCaddress2()%></td>
 <td><bean:message key="label.cfax"/></td>
 <td><%=cust.getCfax()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.ccity"/></td>
 <td><%=cust.getCcity()%></td>
 <td><bean:message key="label.czip"/></td>
 <td><%=cust.getZip()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.cstate"/></td>
 <td><%=cust.getCstate()%></td>
 </tr> 
 <td>
 
 <bean:message key="label.Admin"/>
 </td> 
 <tr>
 <td><bean:message key="label.AAname"/></td>
 <td><%=cust.getAname()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAemail"/></td>
 <td><%=cust.getAemail()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAphone"/></td>
 <td><%=cust.getAphone()%></td>
 </tr> 
 <td>
 
 <bean:message key="label.User"/>
 </td> 
 <tr>
 <td><bean:message key="label.AUname"/></td>
 <td><%=cust.getUname()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AUemail"/></td>
 <td><%=cust.getUemail()%></td>
 </tr> 
 <tr align="center">
 <td><html:submit value="Update"/></td>
 </tr>
 </html:form>
<%
%>
<%
%>
 </table>
 </td>
 </tr>
 </table>
</body>
</html:html>

u r using action classes. so after calling the insert method in Action Class to a dao... the next statement should be retrieve statement. so at the time of updating first it will get updated.. the next statement it will execute is retrieve and then set these details in VO or FORM and show it on JSP
Message was edited by:
leo_michael

Missing update for a game app after updating ios7 any ideas how to get the update

Went to update a game app this morning, had already hit update when the i os7 update screen popped went through with the ios update but after ipad restarted the game update is completely missing any ideas how to get the update back no luck so far

Hello THEVIN7
The next step if it is not updating, would be to delete the app and then download it again. Check out the general troubleshooting for apps purchased form the App Store.
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/ts1702
Regards,
-Norm G.

I have an older mac and it wants me to update to itunes 10 but my mac is too old and I cant figure out how to disable the update

I have an older mac and it wants me to update to itunes 10 but my mac is too old and I cant figure out how to disable the update so I can use the store.

If Software Update is offering the update then it would be compatible with your model. Unfortunately, you haven't provided us with any information on your hardware that would enable us to determine if it really is too old.
If you really wish to disable the update alert then the next time Software Update opens, select the update in the list then select "Ignore update" from SU's Update menu.

How to refresh the panel's display in listener?

I have a Jcombobox and a panel(square,background color:white). I want user to choose the panel's size from the combobox and thus change the panel's display. However, when I choose a value from combobox, the panel's size DOES change, but the display cannot be rerfreshed realtimely. It still display the panel by previous size. If I minimize the whole window and restore, then the panel gets refreshed, displaying by new size.
Can anybody tell me how to refresh the panel's display dynamically? thank you a lot.
sraiper

if we bounce the listener the connections to other might be lost.NO!
The listener contacts the DB to establish the initial connection between client & DB.
After the connection between DB & client has started, the listener has NO involvement between DB & client.
Stopping the listener has NO impact on existing sessions.
Edited by: sb92075 on Jul 28, 2009 4:37 PM

How to refresh the input text value in backing bean

hi all
i want to know
how to refresh the input text value in backing bean?
i have tried this code ,but it doesnt work
public void click(ActionEvent actionEvent) {
tempConId.setValue("111111111111111");
AdfFacesContext.getCurrentInstance().addPartialTarget(tempConId);
sb know?
Edited by: Joe Zou on 2012-4-6 下午9:11

The code looks good.
Here is a sample based on your use-case:
InputTextSample.jspx:
<af:form id="f1">
 <af:panelFormLayout id="pfl1">
 <f:facet name="footer">
 <af:commandButton text="Ok" id="cb1" partialSubmit="true"
 actionListener="#{InputTextSampleBean.onClick}"/>
 </f:facet>
 <af:inputText label="InputText" id="it1"
 binding="#{InputTextSampleBean.myInputText}"/>
 </af:panelFormLayout>
 </af:form>
InputTextSampleBean.java:
import javax.faces.event.ActionEvent;
import oracle.adf.view.rich.component.rich.input.RichInputText;
import oracle.adf.view.rich.context.AdfFacesContext;
public class InputTextSampleBean {
 private RichInputText myInputText;
 public InputTextSampleBean() {
 public void setMyInputText(RichInputText myInputText) {
 this.myInputText = myInputText;
 public RichInputText getMyInputText() {
 return myInputText;
 public void onClick(ActionEvent actionEvent) {
 this.myInputText.setValue("1234");
 AdfFacesContext adfFacesContext = AdfFacesContext.getCurrentInstance();
 adfFacesContext.addPartialTarget(this.myInputText);
}

How you refresh the planning application

how you refresh the planning application ? what is an enhanced calculation script?

Is this for an exam or interview?
Cheers
John
http://john-goodwin.blogspot.com/

How to debug the update FM

Hi,
I am facing a problem with the debugging of the update FM. I have enabled the update debugging and the system says that update debuging is on . even though the control did not go into the FM.
Do i need to check in any other transaction . Please give me the details steps on how to see the what is happening in the update FM.
Full marks are guaranteed.
thanks
sankar

Hi
I have got a clue from SAP help on how to debug the update FM see the below information from SAP
When you debug a program that calls function modules using the IN BACKGROUND TASK addition, they are processed in a background work process (additional internal session). If you set the In background task: Do not process option, the system collects the function calls, but does not start the background work process. The Debugger assigns a transaction ID, which identifies the background work process uniquely. You can now start the Debugger for the background work process using transaction SM58. You can select the function module concerned here, and then execute it via the Edit menu.
I have done everything that is said above , but could not find any entries in SM58
any suggestions
thanks
sankar

How to refresh the table control on some action

Hi All,
     In a web Dynpro application, I am filling data to the Table control through Supply function. When I do some action (like save new record ) i want to refresh the table control means add the newly added record.
   How to refresh the Table control.
Thanks
Hemalatha

hi hema........
    if you are using a select query inside the supply function...
    then...
    you can just use node->invalidate(). method..
    it just invalidates the node that is bound to the table.
   so the supply function will be called again, which again uses the select query to fetch the values.. so that your table gets refreshed.
---regards,
   alex b justin

How long does the update for ios 7

How long does the update take on an ipad 2 for the ios 7?

The update has been going for 3 1/2 hours. The screen is black, if I hit the on/off button, the screen comes up with Itunes symbol with the usb cord. I assume it means I need to connect it to itunes through my computer.
I don't know if I lost my wifi connection during the update or not.
Does that sound right?

How to download the update

how to donwlaod the update?

If you are talking about Acrobat (this forum), the updates are available at Help>updates. You can also download them from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows or the MAC equivalent. Be aware that the updates must be installed in order. With multiple updates you only have to reboot after the last update.

How to refresh the updated R/3 Hierarchy in BW

Similar Messages

Maybe you are looking for