How to refresh user level schema in apps

Guys.
how to refresh user level schema in oracle apps, My DB is 10g and apps version is 11.5.10.2 and OS: HP UX, Can any one give me some detail explanation.
Thanks

I would recommend Datapump over Export/Import because it is faster and allows you to restart the job in case it failed.
In addition to Export/Import/Datapump, you can use Transportable Tablespaces with RMAN.
Creating Transportable Tablespace Sets from Backup with RMAN
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/ontbltrn.htm#CACDBIHC
Note: 371556.1 - How move tablespaces across platforms using Transportable Tablespaces with RMAN
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=371556.1

Similar Messages

How to define user defined schema in LDAP

Hi guys,
I have created user defined fields in OIM through design console.
Could any one please help me in writing user defined schema in LDAP with the fileds created in OIM.
Thanks,
divya

Hi Divya
I'm a little confused about what you're asking. Does the custom schema already exist within your target LDAP server? Are you trying to work out how to pass custom attribute values through as part of an OIM provisioning operation? Which particular LDAP Server and Connector are you using?
Or are you perhaps asking how to actually create a user-defined schema extension within the LDAP directory? In this case, that will completely depend on which LDAP Server implementation you're using and you should probably refer to the product docs for that product.
Hope this helps
Cheers
Rob

How to setup User-level LaunchDaemons and scp/rsync

We are trying to rsync/scp scripts from a Xserve 10.6 (just installed) to an Xserve 10.4, both of which which run scientific models, and transfer output files between systems automatically. These scripts must start automatically on reboot. This is easily done via cron jobs on our older Xserves.
Taking the plunge into converting cron jobs to launchd jobs has, for the most part, gone relatively smoothly. However, I am unable to locate instructions/examples on how to do the following:
While it is possible to set up a LaunchDaemon *.plist on a System(root) level by placing it in /Library/LaunchDaemons, it is unable to do an scp or rsync (without needing the password), because it does not have a root id_dsa.pub installed on the remote Xserve (I really do not want to do that!). An scp/rsync job should be done at the user level.
According to the man pages, there is no such thing as a ~user/Library/LaunchDaemons, only ~user/Library/LaunchAgents, which if I understand correctly, are only executed when the user logs in.
So how do I permit user-level scp/rsync operations (easily done in cron) using launchd?

Thank you for your comment and suggestion. I will give your suggestion a try. However, it seems the question is still open:
If a user wants to write a program/script that does an scp/rsync that transfers a file from one host to another (assuming the .ssh keys are properly set up), and put it into a launchd process that executes like it would under a cron (i.e., they do not need to be logged in, and it persists after a reboot), how is this accomplished without using the root-level /Library/LaunchDaemon?
Am I miss-informed that a users LaunchAgents are executed only when the user logs in?
At least in the scientific arena, using a cron to transfer files is a very regular practice. It would be a major headache if the system administrator had to manually add each users launchd files to /Library/LaunchDaemon

How to get user count by Planning app in 11.1.2.1

I have no. of planning apps and I need to get a user count by application.
I tried to export the security by using LCM but the export doesn't provide the information in a readable format.
Is there a way to generate a report where I can get the count (user ids) by planning app ?
Thanks in advance

Could you not get somebody to run the queries for you they quick and simple
anyway if you have to go down the filter per user route then maybe you could use maxl and spool the output.
e.g.
login admin password on servername;
spool on to "path\filename.txt";
display filter on database appname.dbname;
spool off;
logout;
Cheers
John
http://john-goodwin.blogspot.com/

How to set users level security profiles and auditing?

hi,
We are using EBS 12( 12.0.6 ) with database 10g (10.2.0.3) on Linux redhat 4.
I want to set the all user level and site level security profiles like user login attempts, password attempts, case sensitivity, and all these
infos and attempts should be audit.
Please also explain the empact of audit on running system?
Thx

I want to set the all user level and site level security profiles like user login attempts, password attempts, case sensitivity, and all these
infos and attempts should be audit. https://forums.oracle.com/forums/search.jspa?threadID=&q=Profile+AND+Option+AND+API&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Profile+AND+Option+AND+Audit&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Please also explain the empact of audit on running system?https://forums.oracle.com/forums/search.jspa?threadID=&q=Auditing+AND+FND+AND+Profile+AND+Option&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Try this in a TEST instance before you promote it to Production.
You will need to bounce the application services and enforce the users to sign off/on after setting those profile options.
Thanks,
Hussein

Does anyone know how to associate user-assigned keywords with apps so that they can be searched/ filtered based on the keywords?

I have a large number of apps that exceed the capacity of my multiple idevices and I want to be able to create app lists (similar to playlists) so I can change what goes onto my idevices quickly depending on what is going on. Individually picking apps in itunes each time is time-consuming so I was wondering if there was a way to associate tags or user-assigned keywords to apps so they could be filtered/ searched to select the ones I want.

I have a large number of apps that exceed the capacity of my multiple idevices and I want to be able to create app lists (similar to playlists) so I can change what goes onto my idevices quickly depending on what is going on. Individually picking apps in itunes each time is time-consuming so I was wondering if there was a way to associate tags or user-assigned keywords to apps so they could be filtered/ searched to select the ones I want.

How get scott user database schema in oracle 10g express edition

hi
plz any on can tell me how to get the scott user database table details into the oracle 10g express edition
Iam created the user as scott but but i didn't get the table details
...plz give me the details correctly.

You will go into this path C:\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin\scott.sql. You can get scott.sql script yhen you need to run the script like @C:\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin\scott.sql. Otherwise you just copy the below script and save it into one file then run that file using @
Rem Copyright (c) 1990 by Oracle Corporation
Rem NAME
REM    UTLSAMPL.SQL
Rem FUNCTION
Rem NOTES
Rem MODIFIED
Rem    gdudey       06/28/95 - Modified for desktop seed database
Rem    glumpkin   10/21/92 - Renamed from SQLBLD.SQL
Rem    blinden   07/27/92 - Added primary and foreign keys to EMP and DEPT
Rem    rlim       04/29/91 -          change char to varchar2
Rem    mmoore       04/08/91 -          use unlimited tablespace priv
Rem    pritto       04/04/91 -          change SYSDATE to 13-JUL-87
Rem   Mendels     12/07/90 - bug 30123;add to_date calls so language independent
Rem
rem
rem $Header: utlsampl.sql 7020100.1 94/09/23 22:14:24 cli Generic<base> $ sqlbld.sql
rem
SET TERMOUT OFF
SET ECHO OFF
rem CONGDON    Invoked in RDBMS at build time.     29-DEC-1988
rem OATES:     Created: 16-Feb-83
GRANT CONNECT,RESOURCE,UNLIMITED TABLESPACE TO SCOTT IDENTIFIED BY TIGER;
ALTER USER SCOTT DEFAULT TABLESPACE USERS;
ALTER USER SCOTT TEMPORARY TABLESPACE TEMP;
CONNECT SCOTT/TIGER
DROP TABLE DEPT;
CREATE TABLE DEPT
       (DEPTNO NUMBER(2) CONSTRAINT PK_DEPT PRIMARY KEY,
    DNAME VARCHAR2(14) ,
    LOC VARCHAR2(13) ) ;
DROP TABLE EMP;
CREATE TABLE EMP
       (EMPNO NUMBER(4) CONSTRAINT PK_EMP PRIMARY KEY,
    ENAME VARCHAR2(10),
    JOB VARCHAR2(9),
    MGR NUMBER(4),
    HIREDATE DATE,
    SAL NUMBER(7,2),
    COMM NUMBER(7,2),
    DEPTNO NUMBER(2) CONSTRAINT FK_DEPTNO REFERENCES DEPT);
INSERT INTO DEPT VALUES
    (10,'ACCOUNTING','NEW YORK');
INSERT INTO DEPT VALUES (20,'RESEARCH','DALLAS');
INSERT INTO DEPT VALUES
    (30,'SALES','CHICAGO');
INSERT INTO DEPT VALUES
    (40,'OPERATIONS','BOSTON');
INSERT INTO EMP VALUES
(7369,'SMITH','CLERK',7902,to_date('17-12-1980','dd-mm-yyyy'),800,NULL,20);
INSERT INTO EMP VALUES
(7499,'ALLEN','SALESMAN',7698,to_date('20-2-1981','dd-mm-yyyy'),1600,300,30);
INSERT INTO EMP VALUES
(7521,'WARD','SALESMAN',7698,to_date('22-2-1981','dd-mm-yyyy'),1250,500,30);
INSERT INTO EMP VALUES
(7566,'JONES','MANAGER',7839,to_date('2-4-1981','dd-mm-yyyy'),2975,NULL,20);
INSERT INTO EMP VALUES
(7654,'MARTIN','SALESMAN',7698,to_date('28-9-1981','dd-mm-yyyy'),1250,1400,30);
INSERT INTO EMP VALUES
(7698,'BLAKE','MANAGER',7839,to_date('1-5-1981','dd-mm-yyyy'),2850,NULL,30);
INSERT INTO EMP VALUES
(7782,'CLARK','MANAGER',7839,to_date('9-6-1981','dd-mm-yyyy'),2450,NULL,10);
INSERT INTO EMP VALUES
(7788,'SCOTT','ANALYST',7566,to_date('13-JUL-87')-85,3000,NULL,20);
INSERT INTO EMP VALUES
(7839,'KING','PRESIDENT',NULL,to_date('17-11-1981','dd-mm-yyyy'),5000,NULL,10);
INSERT INTO EMP VALUES
(7844,'TURNER','SALESMAN',7698,to_date('8-9-1981','dd-mm-yyyy'),1500,0,30);
INSERT INTO EMP VALUES
(7876,'ADAMS','CLERK',7788,to_date('13-JUL-87')-51,1100,NULL,20);
INSERT INTO EMP VALUES
(7900,'JAMES','CLERK',7698,to_date('3-12-1981','dd-mm-yyyy'),950,NULL,30);
INSERT INTO EMP VALUES
(7902,'FORD','ANALYST',7566,to_date('3-12-1981','dd-mm-yyyy'),3000,NULL,20);
INSERT INTO EMP VALUES
(7934,'MILLER','CLERK',7782,to_date('23-1-1982','dd-mm-yyyy'),1300,NULL,10);
DROP TABLE BONUS;
CREATE TABLE BONUS
    ENAME VARCHAR2(10)    ,
    JOB VARCHAR2(9) ,
    SAL NUMBER,
    COMM NUMBER
DROP TABLE SALGRADE;
CREATE TABLE SALGRADE
      ( GRADE NUMBER,
    LOSAL NUMBER,
    HISAL NUMBER );
INSERT INTO SALGRADE VALUES (1,700,1200);
INSERT INTO SALGRADE VALUES (2,1201,1400);
INSERT INTO SALGRADE VALUES (3,1401,2000);
INSERT INTO SALGRADE VALUES (4,2001,3000);
INSERT INTO SALGRADE VALUES (5,3001,9999);
COMMIT;
SET TERMOUT ON
SET ECHO ON

How to set volume levels in individual apps.

I know on windows, you can set the volume for programs in the background, how do I do something similar to this on my mac?
Best Regards,
Patrick

No, unfortunately.
There is no Volume Mixer / Windows like utility available in OS X.
Google it. I do not use any third party utility.
Best.

How to migrate users from one environment to another

Hi Guys,
R12.1.1 on Linux
What is the best way to migrate or copy users from dev or prod to new instance that is a fresh install.
Thanks in advance

Hi,
You can use FNDLOAD to migrate the users/responsibilities.
Note: 232029.1 - How to move User/Responsibilities across 11i Apps instances
Note: 376469.1 - Can FNDLOAD Migrate User Accounts Without Forcing Users To Change Their Passwords?
Regards,
Hussein

How can we enable the trace at schema / user level

Hi ,
I knew how to enable the trace at session level and system level.
How can we enable trace at schema / user level.
Thanks
Naveen

I still don't understand.
As far as I know, 'trace' means 'to emit information about a subset of the steps being taken through code, generally to profile timing or identify code paths'.
As far as I know, a user and a schema are passive. There is absolutely no code 'running' against a user or a schema. I have no idea what could be 'traced' for a user or schema that is not already available in the data dictionary.
Further, a schema is nothing other than a named set of database objects. The name happens to be tied to a specific userid. So a schema could be considered a special kind of userid - although that is technically incorrect.
A session, on the other hand, is active. There is code running, there is memory assigned. It happens to link to the connection established by a user, using a specific userid.
I think you have told us you know how to turn on tracing for a session.
Why can you not turn on the traciong for all the sessions for a userid?

Grant permission to all objects of a schema to apps user(Oracle 10g)

Dear Fiiends,
I would like to grant permission on all objects of a particular schema to apps user(Oracle 10g).How do I do it?
(ex)grant all on <schemaname>.<objectname> to apps with grant option.
This is the permission i want to give but i can't do it for all objects one by one so how do i do it in a single command.
Regards,
Arun

You can't do it in a single command. You have to give object-by-object privileges (you could grant something like SELECT ANY TABLE, but that applies to every schema in the database and is generally a rather bad idea). You can, however, use a bit of dynamic SQL to do the job, i.e.
FOR x IN (SELECT * FROM user_tables)
LOOP
EXECUTE IMMEDIATE 'GRANT ALL ON schema_name.' || x.table_name || ' TO apps WITH GRANT OPTION';
END LOOP;You can do the same with other object types, hit DBA_TABLES rather than USER_TABLES if you don't want to run this as the object owner, etc.
Justin

User Level permissions (ACLs) - HOW?

Dear Expert,
One more victim of Mackeeper writing to you seeking help...
I tried my best to remove it from the comp and I have succeded.
However, I am stuck at 2 points:
1) How User Level permissions (ACLs)? Please guide....
2) Mackeeper keeps opening pages in safari on its own, whenever I open a new tab. Please GUIDE.
Please help.....
Look forward to receiving valuable inputs.
Regards,
Sony Thadani

There is no need to download anything to solve this problem.
You may have installed the "Downlite" or "VSearch" ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have an adware variant not covered by the support article. Ask for instructions in that case.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This malware is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates
if it's not already checked.

How to create a profile value at user level programatically

Dear all,
I want to create a profile value at user level programatically, I refer to the developer guide and try to use fnd_profile.put() to create a new value.
But I find out the value is just created in session level, not be inserted into base table.
So is there anyone know how to realize this function in PL/SQL?
Any idea is appreciated.
Best Regards,
Kenny

Check Note: 364503.1 - How to Set a System Profile Value Without Logging in to the Applications
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=364503.1

!!!How to restrict user for making changes in Sales order , partner level

Hi all,
Can anybody tell me how to restrict user for making changes in Sales order at partner level, is it through user exit?

Hi Ruchi
I hope u had gone to the screen fields which u want them not to be editable. So there u select all the fields contents which u do not want to to be changed and check the boxes with W.content and Display and save it. Once evrything is done u have to activate the particular transcation going in to the standard variants and put the name and click the activate button.
Hope its clear
Reward if help ful
Sri

How to Refresh "Internal table values" in User EXIT.

Dear All,
My requirement is to place some checks in exit ZXQQMU20 in different tabs from the TCODE IW21 . IW22 etc.
Now after placeing the checks towards the different tabs while doing "NOCO" from IW21 the conditions are fullfilled but
when i go ahead to modify the created "NOCO " from the TCODE IW22 by deleting the created values and saving in IW22 , the conditions written in the exit are still satisfied eventhough i have deleted the values in IW22.
The reason for this is that the tables which are there in the exit ZXQQMU20 T_VIQMFE , T_VIQMUR , T_VIQMMA
still contains the old values which were there at the time of creation of "NOCO" in IW21 .
How to refresh my " internal tables values" used in such that even at the time of modification of the NOCO through IW22 my table values should pick the current screen values and not the values which were there at the time of creation.
Please help.
The code i have written in the exit is as below:-
********************* Changed vide ******START
*****IW21 IW22 also added in filter criteria of notification *************
******The purpose of this modification is that in the execution of IW21 or IW22 or IW24 or IW25 we have to give a check that if the
******notification type is M2 than inside the Transaction screen , if the Breakdown duration comes less than 15 min than there are
******no issues but if the breakdown duration is more than 15 min than the mandatory fields needs to be entered in the analysis tab.
**    The user has to fill up either following mandatory fields in Analysis Data tab.
**    A. Object Parts & Damages sub tab
**    Code Group - Object Parts (OTGRP, VIQMFE)
**                          AND
**    Code Group - Problem / Damage (FEGRP, VIQMFE)
**    Or
**    Notification Item Short Text (FETXT, VIQMFE)
**   B. Cause sub tab
**    Code Group # Causes (URGRP, VIQMUR)
**    Or
**    Cause Text (URTXT, VIQMUR)
**   C. Action Taken sub tab
**    Code Group # Activities (MNGRP, VIQMMA)
**    Or
**    Activity Text (MATXT, VIQMMA)
**            Then, allow user to complete notification (NOCO).
CLEAR : L_VAR , L_COMP_TIME.
IF ( SY-TCODE EQ 'IW21' OR SY-TCODE EQ 'IW22' OR SY-TCODE EQ 'IW24' OR
      SY-TCODE EQ 'IW25' ).
   IF ( E_VIQMEL-IWERK = '061' ) OR ( E_VIQMEL-IWERK = '062' ).
     IF E_VIQMEL-QMART = 'M2'.
       L_VAR = E_VIQMEL-AUSZT.
       L_COMP_TIME = L_VAR / 60.
       IF L_COMP_TIME < 15.
         EXIT.
       ELSEIF L_COMP_TIME > 15..
*         IF ( T_VIQMFE-OTGRP IS INITIAL AND T_VIQMFE-FEGRP IS INITIAL ) OR ( T_VIQMFE-FETXT IS INITIAL ) .
*           MESSAGE 'Please fill the mandatory analysis data in Object Parts' TYPE 'E'.
*         ENDIF.
         IF T_VIQMFE-OTGRP EQ '' OR T_VIQMFE-FEGRP EQ ''.
           IF T_VIQMFE-FETXT EQ ''.
             MESSAGE 'Please fill the mandatory analysis data in Object Parts' TYPE 'E'.
           ENDIF.
         ENDIF.
         CLEAR L_TAG.
         IF T_VIQMUR[] IS INITIAL.
           MESSAGE 'Please fill the mandatory analysis data in Cause tab' TYPE 'E'.
         ELSE.
           LOOP AT T_VIQMUR.
             IF T_VIQMUR-URGRP IS INITIAL .
               IF T_VIQMUR-URTXT IS INITIAL.
                 L_TAG = 'X'.
               ENDIF.
             ENDIF.
           ENDLOOP.
           IF L_TAG = 'X'.
             MESSAGE 'Please fill the mandatory analysis data in Cause tab' TYPE 'E'.
           ENDIF.
         ENDIF.
         CLEAR L_TAG.
         IF T_VIQMMA[] IS INITIAL.
           MESSAGE 'Please fill the mandatory analysis data in Action' TYPE 'E'.
         ELSE.
           LOOP AT T_VIQMMA.
             IF T_VIQMMA-MNGRP IS INITIAL .
               IF T_VIQMMA-MATXT IS INITIAL.
                 L_TAG = 'X'.
               ENDIF.
             ENDIF.
           ENDLOOP.
           IF L_TAG = 'X'.
             MESSAGE 'Please fill the mandatory analysis data in Action' TYPE 'E'.
           ENDIF.
         ENDIF.
       ENDIF.
     ENDIF.
   ENDIF.
ENDIF.
<Added code tags>
Thank you so much in advance..
-Sudhish
Please use the code tags when you're posting any code snippet
Edited by: Suhas Saha on Jul 13, 2011 12:39 PM

Hi, I was thinking just like XVBAP and YVBAP values in the USEREXIT_SAVE_DOCUMENT.
Plz check u have x /y versions or tables like _old/ _new suffixes and then move the value accordingly.
otherwise there may be inconsistency.
Edited by: Prasenjit S. Bist on Jul 13, 2011 3:03 PM

How to refresh user level schema in apps

Similar Messages

Maybe you are looking for