How to release camera after stop streaming to FMS

When stop streaming, i close NetStream, close NetConnection, clear video, and remove any event listoner on camera. After these actions, the camera is still in used. What's the problem?
thanks.

Hi, you drop connection to the web camera by issuing either vid.attachCamera(null); or vid.attachVideo(null); command.

Similar Messages

How to resume sound after stopping !!

hi,
hoping to fine an answer of how to resume the sound after
stoping
for example, when i'm using stopAllsounds(); AS
now sounds stopped
and i wanna play it again and resume
!!!

that's not the best way to use sound in flash.
it's more flexible and there are less complications if you
remove that sound from the timeline, right click on it in the
library, click linkage and assign it a linkage id. then create a
sound instance:
var s:Sound = new Sound(this);
s.attachSound("yourlinkageid");
// you can then use:
s.start(); // to start your sound
s.stop(); // to stop your sound
// and, in fact, you can use all the sound methods and
properties. check the flash help files.

How to release selection after magnetic lasso?

PE5 - I can't release the selection after using the magnetic lasso tool and completing my edits on the selection. There is no commit/cancel icon, and clicking away from the layer, or on another layer still will not release the selection. The only thing I can do is save, close and re-open the project - then it is released. Any suggestions?

> I wonder where I would have found that otherwise
If you go to the Select menu, you'll see that, next to the Deselect command is this shortcut.

How to determine if video is streamed on FMS?

How can i check to really that a video streamed is utilizing
the FMS vs using the normal window server? I tried to view a .FLV
video in my server by enabling and disabling the FMS..but i dont
see any differences. This is where it got me confuse. Note: This
experiment is based of only 1 user streaming usage, which is me.
This information is important to me to determine whether i
would want to purchase FMS 3 or not.
Any help is greatly appreciated.
Regards,
Teng

iirc, cgi.http_host is a more commonly available cgi variabe
between
various web servers. use that instead of cgi.server_name.
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com/

TV and Airport EXPRESS stop streaming after update

I have read all of the posts regarding the Airport Extreme update being the culprit of the slow streaming with the Apple TV, but I have an Airport Express (2 actually) that suddenly stopped streaming after the last batch of updates (iTunes 8 etc.).
Everything has been working flawlessly - I have all my movies and TV shows on an old Mac that streams to my Apple TV via 2 Airport Express base stations. I have one AE station "hosting" my internet connection, and then the other acting as a WDS remote. Suddenly after the last updates I have no streaming. I have re-set everything, and re-connected my media server to my Apple TV and no luck. My AE's are at the latest firmware 6.3, and Apple TV, iTunes and even OS is all up to date.
If anyone has any ideas how to fix this I would really appreciate it - it's driving me crazy.
Thanks in advance.

Am in the same boat as it where, so will be happy to hear a solution!

My iphone 5 camera suddenly stop working and the shutter dont open after some minutes shutter open with some dolor stripes and it takes 2 or 3 days and again start working normaly it happens every 3 weeks.is this a soft ware problem??

my iphone 5 camera suddenly stop working and the shutter dont open after some minutes shutter open with some dolor stripes and it takes 2 or 3 days and again start working normaly it happens every 3 weeks.is this a soft ware problem??

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

How to stop streaming

I'm developing a Dashboard widget that plays an internet radio stream using the Flip4Mac .wma codec.
When i use the javascript API and call SetURL and Play() it plays fine. When I call Stop() it stops playing, but it doesn't stop streaming. It keeps streaming even if I try to use SetURL with an empty url, "about:blank" and other gibberish.
Actually, even reloading the widget doesn't help - it keeps streaming. Closing the widget seems to do the trick after a few seconds.
I can't really release this widget without a solution, so any solutions or suggestions are welcome!

artmar1 wrote:
I want to turn off streaming on one ATV.
If it is a primary library that you no longer wish to stream, select 'Show only the synced items on my Apple tv' from the summary tab in itunes when the Apple tv is selected in the device menu.
If it is a secondary library ctrl-click/right-click on the Apple tv in the device list and choose 'turn off streaming' from the contextual menu that appears.
(Please excuse my unsupported nomenclature)
Message was edited by: Winston Churchill

MY COMPUTER (ISIGHT) CAMERA HAS STOPPED WORKING.... HOW DO I TURN IT BACK ON?

MY COMPUTER (ISIGHT) CAMERA HAS STOPPED WORKING.... HOW DO I TURN IT BACK ON?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

AirTunes stops streaming after each song but iTunes shows it playing

I've read through a lot of posts and either people are having the same issue just describing them differently or I'm seeing an entirely different issue.
My setup is Windows Vista running iTunes 8, Airport Express and an iPod Touch running the Remote app. I just bought it all yesterday and did all the firmware and software updates it asked me to when setting it all up.
I had it setup wirelessly and working -- the remote controlled iTunes which send audio to my AE and it worked beautifully. Then I realized the music stopped, I went to check and iTunes still showed the music playing, but no sound was coming out of the remote speakers. If I change the speaker output to computer then back to the remote speakers it starts playing again.
I've disabled wireless on the AE and put a long wire across to rule out wirless interference or problems. I've disabled the Windows Vista firewall as well.
I've tested both from the remote and from using iTunes directly. So I've ruled out the Remote App from the equation (I think). I say that, because first thing this morning I ran using just iTunes and it worked for 15 straight songs. I used the remote to change albums and start another and after the first song played it went silent. I noticed in iTunes a playlist called "Remote" comes up so I was thinking the Remote was causing it. I switched over to my library local on iTunes again removing the remote and it keeps happening anyway. So I'm not sure if by using the remote I put it in this "state" or if it's really not the Remotes problem.
OK, so once it happens, it stops streaming after very single song however iTunes still shows it's playing fine. To fix, turn the speaker off then on again or switch to computer then back to remote again. It works doing this via the Remote App or on iTunes directly.
This is FRUSTRATING! I spent a lot of money on the iPod, AE and getting a cheap stereo receiver/amp to feed my in-house speakers and now it's pretty much not even useful.
Suggestions? Help? Anything?
Message was edited by: TimLindner

I wanted to post a follow-up. I solved my own issue after starting to rule out every possible cause.
I have a Western Digital networked hard drive (NAS) which houses all of my MP3's. I knew accessing this drive was pretty slow but I've had my MP3's on it and iTunes' library is all coming off this drive. It has worked fine on my computer for years. However, it appears that the lag doesn't play nice with AirTunes.
I moved my entire iTunes library (about 80 GB) to my local machine's hard drive, rebuilt my library and now it plays flawlessly!
Just so people know, I've updated firmware on the AirportExpress and the iPod Touch, I have the new version of Remote on the touch and am running iTunes 8 on Windows Vista with its library on the local harddrive. No glitches, pauses, or problems. I ran it for 6 hours during a party over the weekend without flaw.
-Tim

How to find the ME29N 'USER EXIT' when our save the release PO after.

How to find the ME29N 'USER EXIT' when our save the release PO after.
which user exit will be used?
thanks.
alex.

Hi,
process :
    go to tranx code :   ME29N ,
       System---->Status , here copy the program name (SAPLMEGUI),
     go to abap editor and specify the program name SAPLMEGUI and find the package "ME".
     tranx code : CMOD , Utilites--->Sap Enanchement,
                                     specify the package name : ME
                                      and execute, displays a list of exits ,
                             and find out our suitable exit based on requirement.
check these :   EXIT_SAPMM06E_021
reg
Siva

HT201317 how do I save my photo stream photos to my camera roll? It's not working.

how do I save my photo stream photos to my camera roll? It's not working.

Photo stream photos are not included in your backup, only camera roll photos are. Photo stream photos can only be accessed from an iOS device or computer that is signed into your iCloud account and has photo stream enabled. However, they only remain in iCloud for 30 days; if the photos are older than that they are no longer available to download.
If the photos were in the camera roll on your 3GS when you last backed it up, restoring the backup to another iPHone should recover them. If this is an iCloud backup, you'll need to do this before the backup is 180 days old or Apple will delete it.
If you need to restore the iCloud backup to your 4s, back up your 4s to your computer using iTunes, then restore the iCloud backup of your old phone to it, import the recovered photos to your computer (as explained here: http://support.apple.com/kb/HT4083), then restore your phone to the iTunes backup your made earler to recover your data.

How do I know it is okay to disconnect my camera after downloading photos

When I download photos from my SLR to my iMac using Aperture 3.1.3 is there anything I need to do to disconnect my camera after the download?
Usually there is an okay to disconnect message or button to ejec. I do not see anything on Aperature that it is okay to disconnect.

Just pull the plug. It's OK.
Aperture (and OS X) will see a card reader as a drive and mount the drive, and you will get an "Eject Card" button. That's not how it works with a camera. After you have imported your photos, you'll click something on the "Aperture has imported ## photos" dialog, and then it's OK (and recommended) to disconnect the cable. (Leaving the cable connected drains the camera battery.)

How to call a method in jsf after stop typing in test box?

Hi all,
In my jsf page i have a text box in which user type some text field like "abc". i want after stop the typing i want a method to be called automatically and a datatable will be populated sith some result. my problem is is how to call the method automatically so that the user does not have to click any button after typing in the text box? plz help..
Edited by: sailajoy on Dec 23, 2008 3:36 PM

If it is after certain characters that the user types you can ascertain that the entry is done you can use onkeyup and within the javascript count the characters an when the necessary characters are set do the action you need to do.
There should be some way by which you can suggest that the user has stopped typing i.e. either the max length has reached or the user has hit tab or went to another field. Going on other field too you can bring the focus back to your original field from where the user had hit tab. If you are thinking of something liek google suggest then AJAX is the best way to implement it.

HT1338 built in camera has stopped working, how can I update or reinstall the drivers

Built in camera has stopped working, how can I reinstall the respective drivers?

Here are my best suggestions for your camera problem, Stephen:
• If you have not already done so, shut down Mac, restart,
    and try again. If the camera still does not work, continue.
• Try ALL relevant suggestions from Apple's Troubleshooting
   article: http://support.apple.com/kb/HT2090
(Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD." Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
   If you need to use the "reset" suggestion, use the correct reset for your Mac.
• Use your Mac's Disk Utility to repair permissions and then
   download and apply the latest Combo Update. For your Mac OS,
   the current version is at http://support.apple.com/kb/DL1640
• Repair permissions again immediately following the system restart
   that completes the Combo update.
Properly applying the Combo version of updates can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of the camera.
• If nothing else resolves your problem, yours is likely a hardware issue.
   Unless you have a current backup, make one now.
Then use the final "Troubleshooting" suggestion:
"... contact Apple or an Apple-Authorized Service Provider for service."
Message was edited by: EZ Jim
Mac OSX 10.8.3

Buttons after stop(); wont work; how can I FIX this

Buttons after stop code (vidPlayer.stop();) wont work.
I figured out the stop code needed to stop my videos from playing when you click another button, but with my stop code being on top of my "gotandStop("label")" my buttons doesn't perform that function. I take the vidPlayer.stop(); off the buttons the buttons work fine, but then my videos wont stop playing when I click another button. Help, how I can get my buttons back working and still stop my videos from continuely playing when another button is clicked.
Below is my code:
btn3.addEventListener (MouseEvent.Click, clickHandler3);
function clickHandler3 (e:MouseEvent):void{
     vidPlayer.stop();
     gotoAndStop ("services");
With the code exactly the way it is; when I like on the services button it wont work (unles I start from the about btn, which houses the vidPlayer) I want to beable to go into my website and click any button and it work, not go to the about button first an then to any other button. Please HELP BE ON THIS SAME PROBLEM FOR WEEKS. IAM A BEGINNER ASWHILE SO DUMB IT DOWN PLEASE.

make sure vidPlayer is declared in frame 1 of your main timeline:
var vidPlayer:<class>; // use the correct class here. for example, FLVPlayback
you can then use:
btn3.addEventListener (MouseEvent.Click, clickHandler3);
function clickHandler3 (e:MouseEvent):void{
if(vidPlayer!=null){
     vidPlayer.stop();
     gotoAndStop ("services");

How to release camera after stop streaming to FMS

Similar Messages

Maybe you are looking for